Kullanılmış Scm Olimpic K 360 satın al (3)

Durum: iyi (kullanılmış), Üretim yılı: 2017, DIGITALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm with corner rounding unit - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness (coil): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strip): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness +2 mm on each side - Feed (feed rate): 11 m/min - Distance between panels: 600 mm - Panel overhang relative to transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Barcode reader prepared - Ø800 mm coil holder - Frontal extension table - Easy size: digitized positioning of infeed fence and working height - Anti-adhesive spraying unit - Edge trimmer (Rectifier RT-V) 12000 rpm - Infrared pre-heating of panels at infeed - Glue spreading unit (VC-VM) with interchangeable glue pot for granules, capacity 1 kg. Heat-up time 12 minutes Pneumatic pre-cutting guillotine Digitally positioned pressure station with 3 rollers including 1 motorized and timed roller Isdpfx Apjrx S Ipoyeau - Tilting end trimming unit 0-20° 12000 rpm - Top/bottom flush trimming unit with digitized positioning and copying system. 1/4 round cutter 2 mm (or chamfer) 12000 rpm - Corner rounding unit R2 mm 12000 rpm with digitized positioning - Top/bottom radius scrapers R1 & R2 mm with digitized positioning - Top/bottom straight scrapers - Edge finishing misting device OTHER FEATURES: - Rectifier unit motors: 2x2 kW - Trimming motors: 2x 0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming (milling) unit motors: 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Main power supply: 380V. Three-phase 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Flush trimming 360 m³/h Scrapers 2x360 m³/h Maximum floor space required in operating position: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Durum: iyi (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, Kullanılmış Kenar Bantlama Makinesi SCM Iodpfoyrr Naox Apysau - Model: Olimpic K360 T-ER1 - Çok iyi durumda. - Hemen teslim. - Video talep üzerine. - Üretim yılı 2016 - Üst düzey donanım (2 ekstra tutkal kabı ile)

Durum: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş akımı: 23 A, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, kenar kalınlığı (maks.): 6 mm, X ekseni ilerleme hızı: 11 m/dak, toplam uzunluk: 4.200 mm, toplam ağırlık: 1.430 kg, Donanım: CE işareti, dokümantasyon / kılavuz, We are offering this used SCM Olimpic K 360 T-ER1 machine, year of manufacture 2017. Feed speed: 11 m/min Panel thickness: 8–60 mm Edge thickness: 0.4–6 mm Roll edge material: 0–3 mm Strip edge material: up to 6 mm Compressed air pressure: 6 bar Minimum workpiece length: 140 mm Minimum workpiece width: 90 mm Distance between consecutive workpieces: 600 mm Iasdjzb Aahepfx Apyju Power supply: 400 V Weight: 1,430 kg Machine length: approx. 4.10–4.20 m Equipment included: 1. Pre-milling unit - 2 counter-rotating diamond heads - removes up to approx. 3 mm of material before edge banding 2. EVA glue application unit - Teflon-coated tank - rapid heating - possibility to use interchangeable glue pots 3. Pressure zone - driven pressure roller + 2 pressure rollers 4. K-2 end trimming unit - straight or bevelled trimming options - automatic mode switching 5. Top/bottom milling unit - flush, radius, or chamfer edge finishing 6. Corner rounding unit - processing of front and rear corners - radius R1/R2 7. Profile scraper - finishing the radius of the edge 8. Flat scraper - removal of glue residue 9. Buffing units - removal of glue residue 10. Anti-adhesive fluid system - 2 types of fluids for easier removal of glue residue The machine is fully functional and in continuous use. Testing is possible. If you have any questions or require additional information, please contact us.