Used AOKI SBIII-250LL-50S - Year 2016

Aoki AOKI-250LL-50S

Used AOKI SBIII-250LL-50S - Year 2016Technical Specifications & Performance DataThe AOKI-250LL-50S is a four-cavity injection stretch-blow molding machine with Direct Heatcon technology, manufactured by Aoki Technical Laboratory, Inc. in 2016. Designed for integrated preform injection and stretch-blow molding, this industrial packaging machine supports the production of plastic containers in a compact, controlled process.Configuration: 4 cavitiesInjection capacity: 386.0 cm³/shotInjection pressure: 121.0 MPaInjection rate: 204.2 cm³/secInjection mold clamping force: 490.6 kNBlow mold clamping force: 297.2 kNMaximum preform length below neck: 160 mmDimensions with safety doors closed: 5,340 × 2,100 × 3,410 mmMachine weight: approximately 10,650 kgIn its four-cavity configuration, the machine is suited to containers with an approximate capacity of up to 2.0L, with an example neck diameter of 60 mm, body diameter of 100 mm, and height of 335 mm. The documented product-range examples extend from approximately 0.12L to 5.0L across alternative cavity configurations.Advanced Automation & Control SystemsThe machine operates from a 3-phase 380 V, 60 Hz electrical supply, with total installed power of 75.0 kW and current of 143 A. Its injection system incorporates a 64 mm screw, 120 mm screw stroke, maximum screw speed of 127 min⁻¹, and an AC servo-motor rated at 4 kW.Pump motor: 37 kWBarrel heater: 23.415 kWHot runner heater: 8.41 kWNozzle touch force: 18.5 kNSafety-door enclosed operating footprintThe combined injection and blow-molding arrangement supports repeatable container forming while reducing intermediate preform handling. Machines of this type are well suited to automated industrial packaging environments where process consistency and coordinated mold operation are required.Production Line Integration CapabilitiesThis Aoki injection stretch-blow molding machine can operate as a dedicated container-production asset within a used bottling line or as part of a broader beverage production and industrial packaging facility. It produces molded plastic containers directly from resin, supporting downstream filling, capping, labeling, and secondary packaging operations.Integration planning should account for molded-container transfer, production balancing with downstream bottling equipment, and mold compatibility for the intended neck finish and container geometry. The 4-cavity configuration is documented for approximately 2.0L containers, while the machine category offers flexibility through appropriate mold tooling.Machine Condition & Maintenance HistoryManufactured in November 2016, this second hand Aoki machine is identified as AOKI-250LL-50S. The documented machine identification plate indicates CE marking. Installation planning should include a complete operational inspection, verification of utility connections, and confirmation of mold, heating, hydraulic, pneumatic, and cooling-system condition before commissioning.Opera...
Chsdpfx Aj Adtr Aslyjd