Kullanılmış pET işleme satın al (5)

Durumu: kullanılmış, Üretim yılı: 2009, makine/araç numarası: PR21, Technical Specifications & Performance Data This Husky injection molding machine was designed for high-volume production of PET preforms and is well suited for integration into a used bottling line or as a second-hand addition for industrial packaging operations. The 120-ton clamping unit is equipped with a 32-cavity hot runner system, enabling consistent output of PET preforms for various bottle formats. Manufactured by Husky in 2009, this unit is engineered for rapid mold changes and reliable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Cavities: 32 Hot runner system: Husky 32-cavity hot runner, uniform across supplied tooling Neck finishes: 29/25 mm primary; additional components for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Additional 30/25 mm components: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete installed set at 22.0 g) Typical cycle times: 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3~ + N + PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit withstand (control cabinet): 10 kA Included peripherals: Plastic Systems granulate dryer with material hopper, mold dehumidifier, and available spare parts Supported bottle formats via preforms: 0.2 L, 0.5 L, 1.0 L Container material: PET Advanced Automation & Control Systems The machine is equipped with Husky technology for precise temperature control, shot consistency, and efficient thermal management in the 32-cavity hot runner. The injection system supports quick setup with plug-and-play cold halves, simplifying size and weight changes. Operator interaction is optimized with an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control cabinet is industrial-grade, rated at 10 kA short-circuit withstand, with clear segregation of main and auxiliary supplies. Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold halves, mold plate, and cooling receiver Electrical: 400 V, 50 Hz, three-phase with neutral conductor and protective earth Integration Options in Production Lines Optimized for PET preform manufacturing, this system integrates seamlessly with upstream material handling and downstream conveying, stretch blow molding, quality control, and packaging stations in beverage production. The included Plastic Systems granulate dryer and mold dehumidifier stabilize material and tooling conditions, enhancing consistency and throughput in complete bottling and packaging lines. Redpfsyhbd Sox Agfsp Inline or standalone operation for preform supply Compatible with industrial environments and production processes.

Durumu: kullanılmış, Üretim yılı: 2009, makine/araç numarası: PR22, Technical Specifications & Performance Data This Husky injection molding machine is engineered for highly efficient production of caps and closures, making it an excellent choice for beverage production environments that require consistent, high-quality results. Manufactured in 2009, the unit features a 160-ton clamp force platform combined with a 24-cavity mold, optimized for 29/25 mm neck finishes. It is delivered with robust auxiliary equipment to stabilize process conditions and to simplify operation within an industrial packaging workflow. Manufacturer: Husky Injection Molding Systems Model: H160 RS45/42 Rodpfx Aoyhbdxogfep Year of manufacture: 2009 Application: Molding of caps/closures for beverage packaging Mold configuration: 24 cavities Closure specification: 29/25 mm, free-start cap Nominal part weight: 1.20 g (cap) Clamping force: 160 tons Power supply: 400 V, 50 Hz, 3-phase + N + PE Main supply current: 101 A Maximum motor current: 42 A Maximum heating current: 31 A Short-circuit current rating (SCCR): 10 kA Scope of delivery includes: Altanium temperature controller, mold dehumidifier, hopper loader, color mixing unit, available spare parts Advanced Automation & Control Systems The machine is equipped with an Altanium temperature controller for precise thermal management across the hot runner zones. This close temperature regulation promotes uniform melt flow, faster startup times, and reduced scrap rates—critical for thin-wall cap molds. The industrial control panel supports a 3-phase + neutral + protective earth power supply system, with clearly defined load ratings for motor and heating circuits to facilitate safe integration and predictable operation. Precise heating control with Altanium technology Clearly rated electrical distribution for motors and heaters Stable process conditions for consistent cap quality Designed for fast setup and reproducible mold changes Integration Capability in Production Lines This unit integrates seamlessly into cap and closure production cells, suitable for direct connection to a used bottling line and for standalone cap manufacturing operations. It can supply downstream systems such as vision inspection, lining/printing, and bulk material handling for PET bottle closures. The 29/25 mm specification is compliant with common neck finishes in beverage packaging and supports high-throughput operations in industrial packaging settings. Standalone operation or inline use with downstream handling Compatible with PET bottle packaging for beverage production Included auxiliary equipment for stabilized material conveying and color dosing Machine Condition & Maintenance History The machine is reported to be still in production, indicating continued operational status...

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2004, PET preform enjeksiyon makinesi sıkıştırma kuvveti 320t enjeksiyon ağırlığı 6935gr. vida 130mm preform çıkarma sistemi SERVO IV, TPS robot TRT-M4-72-E, 72 katlı, 4 kademeli, çıkarma seti dahil, konveyör bant LT/h 1825 Çıkış yaklaşık 17.000 preform/saat Seçenek1: 30,8 gr için 72 kat MHT kalıp. PCO 1810 veya 1881 (kısa, 28 mm boyun halkası, 1,5 litrelik şişeler) Redpfx Asnxkxwegfjp Seçenek2: 27,8 gr için 72 çekirdek seti. PCO 1810 veya 1881 (shorty, 28mm boyun halkası, 1.0 litre şişeler) Hat, kendi preform üretimimizden geliyor ve yeni hattımız değiştirilene kadar üretimdeydi.

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 3.188 kN, enjeksiyon ağırlığı: 6.935 g, vida konveyör çapı: 130 mm, üretim kapasitesi: 17.000 birim/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Rjdjx A Efhjpfx Agfep Format: 72-cavity, 4-stage EQUIPMENT Pick-off unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Durumu: kullanılmış, Üretim yılı: 2020, EASYMASTER EM560-SVP-2 Rodpsubu A Sofx Agfjp Sıkıştırma kuvveti 560 T Enjeksiyon hacmi 2544 cm3