Enjeksiyonlu kalıp makinası

Arburg 420C 1000-150/150/60 3-Farben 21.200 h

From 01.07.2025, used machines can also be claimed for tax purposes with a special depreciation rate of 30% per year.

Injection Molding Machine, 3-color or 2-color (the 3rd unit can be deactivated in software)
(horizontal/vertical and 3rd unit in L-position with safety enclosure)

##### Can also be converted to 2-color operation #####

Immediately available from our warehouse in Hannover
Make: Arburg
Model: 420C 1000-150/150/60
Year of manufacture: 2003
Machine no.: 190332

Control system: Selogica
Operating hours: only 21,200 h

+++++Clamping Unit+++++

Controller: Selogica
Clamping force: 1,000 kN / 100 t
Tie bar spacing: 420 x 420 mm
Platen dimensions: 795 x 795 mm
Mold installation height: 300 mm
Max. platen distance: 950 mm
Ejector stroke/force: 225 mm / 66 kN
Clamping system: hydraulic

++++ Injection Unit 1 (150 unit) ++++
Screw diameter: 15 mm (high wear-resistant)
Shot volume: 17 cm³
Shot weight: 15 g
Injection pressure: 2,750 bar

++++ Injection Unit 2 (150 unit) ++++
Screw diameter: 15 mm (high wear-resistant)
Lodpsgrzh Eefx Ahwsta
Shot volume: 17 cm³
Shot weight: 15 g
Injection pressure: 2,750 bar

++++ Injection Unit 3 (60 unit) ++++
Screw diameter: 15 mm (high wear-resistant)
Shot volume: 17 cm³
Shot weight: 15 g
Injection pressure: 2,080 bar

Extras:
1 ALLROUNDER 420 C 1000-150/150/60
1 vertical injection unit mounted on supports for the 2nd injection unit, hand-operated, position adjustable between 70 and 250 mm VE-404/02
2 x core pull
1 open nozzle 15 mm, wear-resistant, without heater band (1st injection unit 150) VE-902/00
1 technology level 2 – servo-controlled hydraulic system with two servo pumps for controlled machine movements, with path-dependent controlled deceleration ramps. The build-up of mold clamping force is programmable and regulated. The clamping force is servo-controlled via the second pump. The build-up of the nozzle contact force is programmable. The contact force is manually adjustable, value is controller-held.
1 technology level 3 hydraulic system with 3 servo pumps for simultaneous movement of major axes and faster movement of ancillary axes. For 2-component machines, as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40
1 heater band for open nozzle VE-320/00
1 injection unit 150 for vertical injection into the mold parting line in 2-component processing VE-136/02
1 position-regulated screw with control valve on the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20
1 position-regulated screw with control valve for multi-component machines – for 2nd injection unit VE-561/30
1 injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit for multi-component processing (L-arrangement) VE-906/00
1 for VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm, incl. special separating plane full protection VE-907/00
1 plasticizing cylinder kit 15 mm (without nozzle), with advanced feed and pressure reducing valve, highly wear-resistant, with sintered metal backflow valve, (L-position) VE-908/00
1 open nozzle 15 mm, wear-resistant, without heater band (L-position) VE-909/00
1 nozzle tip with radius 15 (L-position) VE-910/00
1 heater band for open nozzle (L-position) VE-911/00
1 position-regulated screw for the third injection unit

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.