Vakum pompası

Becker BZ-2

Becker BZ-2 - Packaging System

- 2 identical, mirrored packaging lines available
- without cutting unit
- Year of manufacture: 2020

The system first trims the front edge of the cardboard to remove any possible transport damage. After the initial edge trimming, an additional cut of at least 30 mm is made on both sides. If necessary, a corner of the cardboard is also cut, depending on the FEFCO type. Finally, the cardboard is creased at the folding lines and conveyed out of the machine.

The generated waste is transported out of the machine via a waste conveyor belt located underneath. At the machine’s exit, a conveyor belt disposes of the waste into a container. If the edge trim is too long, it must be cut within the system for seamless conveyance out of the machine.

The cut blanks and products are transported to the folding table, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labelled, and discharged from the system.

Machine components (see diagram):

(1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor

Technical specifications:

Packaging dimensions (top closure):
- Min. carton dimensions (LxWxH): 500 x 120 x 100 mm
- Max. carton dimensions (LxWxH): 2250 x 420 x 320 mm
- Max. product weight: 50 kg
Packaging dimensions (side closure):
- Min. carton dimensions (LxWxH): 300 x 150 x 120 mm
- Max. carton dimensions (LxWxH): 1050 x 620 x 470 mm
- Max. product weight: 50 kg
Installation:
- Operating voltage: 400 V / 50 Hz
- Rated current: 47 A
- Pre-fuse: 63 A
- Connected load: 32.5 kW
- Control voltage: 24 V
- Compressed air supply: 6 bar
- Air consumption: 10 l/min
Kdjdpfx Adoygipmjdsh
- Sound pressure level: < 70 dB(A)
- Machine dimensions (WxHxD): 21,260 x 4,000 x 18,030 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.