Eksantrik pres - tek sütunHELMERDING
ERVL 50 B
Eksantrik pres - tek sütun
HELMERDING
ERVL 50 B
Durumu
Kullanılmış
Konum
Schmölln 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Eksantrik pres - tek sütun
- Makine üreticisi:
- HELMERDING
- Model:
- ERVL 50 B
- Durumu:
- mükemmel (kullanılmış)
Fiyat ve Konum
- Konum:
- Schmölln

Ara
Teklif detayları
- Listeleme kimliği:
- A161-93686
- Referans no.:
- 1010-943
- Son güncelleme tarihi:
- 03.02.2026
Açıklama
Pressure: 50 t
Throat depth: 245 mm
Stroke: 14 / 90 mm
Ram adjustment: 75 mm
Table height adjustment: 150 mm
Strokes per minute: 42 / 85
Table surface: 700 x 490 mm
Ram surface: 400 x 230 mm
Pin hole in ram: 40 mm
Drop-through opening in table: 240 x 140 mm
Installation height (with max. stroke at top and ram adjustment at top): 360 mm
Total power requirement: 4 kW
Machine weight approx.: 3.41 t
Cgsdpfetrhf Aex Afmen
Space required approx.: 0.8 x 1.75 x 2.1 m
The machine was partially overhauled in our workshop as follows:
- Disassembly, cleaning, and inspection
- Table resurface milled
- New painting of the machine in light grey / gentian blue, ram assembly in orange
- Shaft crack testing performed
- Ortlinghaus KBK + additional brake disassembled, cleaned, inspected, seals replaced
- Supplemental air reservoir
- New control cabinet with safety control and touchscreen display
- New machine wiring
- New Vogel central lubrication system with piping (previously manual lubrication points)
- New Herion press safety valve + maintenance unit
- New Balluff cam switchgear
- New two-hand operator control panel
- New foot switch
- Current UVV inspection with brake time measurement
- Machine is safe for manual insertion operations
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Throat depth: 245 mm
Stroke: 14 / 90 mm
Ram adjustment: 75 mm
Table height adjustment: 150 mm
Strokes per minute: 42 / 85
Table surface: 700 x 490 mm
Ram surface: 400 x 230 mm
Pin hole in ram: 40 mm
Drop-through opening in table: 240 x 140 mm
Installation height (with max. stroke at top and ram adjustment at top): 360 mm
Total power requirement: 4 kW
Machine weight approx.: 3.41 t
Cgsdpfetrhf Aex Afmen
Space required approx.: 0.8 x 1.75 x 2.1 m
The machine was partially overhauled in our workshop as follows:
- Disassembly, cleaning, and inspection
- Table resurface milled
- New painting of the machine in light grey / gentian blue, ram assembly in orange
- Shaft crack testing performed
- Ortlinghaus KBK + additional brake disassembled, cleaned, inspected, seals replaced
- Supplemental air reservoir
- New control cabinet with safety control and touchscreen display
- New machine wiring
- New Vogel central lubrication system with piping (previously manual lubrication points)
- New Herion press safety valve + maintenance unit
- New Balluff cam switchgear
- New two-hand operator control panel
- New foot switch
- Current UVV inspection with brake time measurement
- Machine is safe for manual insertion operations
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2013
İstek gönder
Telefon & Faks
+49 34491... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Wiefelstede
2.603 km
Eksantrik pres 50 ila
HeilbronnNEPD 50
HeilbronnNEPD 50
İlanınız başarıyla silindi
Bir hata oluştu



















