Kesme makinesi

Herzog LY300

This LY300 cross and longitudinal grinding machine is used but has only been operated sporadically. The condition is very good; only paint damage and a scratched machine cover indicate the machine's age.

From a safety perspective, the machine is equipped with a cover switch that automatically shuts down the machine as soon as the cover is opened. A restart interlock prevents unintentional start-up.

For the machining of short workpieces, the clamping handle (included) can be used with this machine.

We can also offer additional consumables such as cut-off and cup wheels.

Application: Bar-shaped workpieces can be cut to length and ground flat in a single operation. Ideally suited for the production of ejector pins.

The machine features two parallel grinding spindles: one for cut-off operations and one for face grinding to final dimensions. The desired workpiece length can be set to an accuracy of 0.01 mm using the integrated scale.

Workpiece length without clamping handle:
54 - 300 mm
Workpiece diameter: Ø1-25 mm

Workpiece length with clamping handle (included accessory):
12.5 - 60 mm
Iodpsxwp A Hofx Ac Ejtp
Workpiece diameter: Ø1-10 mm
Ejector pins with cylindrical head: max. size 6

Max. workpiece oversize before machining: 195 mm

Length tolerance: +/-0.01 mm
Squareness: +/-0.01 mm
Weight: 92 kg
Dimensions without scale (W x D x H): 430 x 360 x 500 mm
Dimensions with scale (W x D x H): 820 x 360 x 500 mm
Height with open cover: 950 mm

Cut-off wheel, non-woven: SGA60P6BR1, Ø180x1xØ31.75 mm
Cup wheel: PA46, Ø100x50x10xØ20 mm

Location: Austria / Vienna

Included accessories:
• 1 pc. cut-off wheel SGA60P6BR1 with flange, mounted
• 1 pc. cup wheel PA46 with flange, mounted
• 1 pc. dressing diamond, mounted
• 2 pcs. Y-face spanner wrenches
• 1 pc. pin spanner 6 mm
• 1 pc. scale 300 mm
• 1 pc. micrometer screw with scale sleeve
• 1 pc. lever
• 1 pc. operating manual, German

Operating procedure:
Open the prism clamp: move the lever in the center to the right and insert the workpiece
Close the prism clamp: move the lever to the left
Cutting: move the lever up to the left
Face grinding: move the lever down to the left
Open the prism clamp: move the lever to the center and to the right; remove the finished workpiece.

The grinding wheel can be adjusted and dressed at any time without changing the pre-set dimension.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.