Hidrolik baskı

Hidrogarne MV-600E/NC

HYDRAULIC FOUR-COLUMN PRESS FOR PUNCHING, DRAWING, PIERCING, AND DEBURRING OPERATIONS

Force Tons 600
Motor Power 40 HP at 440 Vac / 60 Hz
Working Speed mm/s 5
Approach Speed mm/s 15
Return Speed mm/s 18
Ram Stroke mm 1,015 mm (40")
Guide Diameter mm 200
Table Usable Area mm 990 x 890 x 130 (39" x 35" x 5")
Between Columns mm 990 x 370
Vertical Clearance mm 1,625 (64")
Working Height mm 990 (39")
Lower Hydraulic Knockout Tons 80
Lower Knockout Stroke mm 406.4 (16")
Upper Hydraulic Knockout Tons 80
Upper Knockout Stroke mm 406.4 (16")
Gjdpfx Ajwpggijc Hjkc
Overall Width mm 1,850
Overall Depth mm 1,700
Overall Height mm 4,500
Weight Kg Approx. 23,000 Kg

The MV-600E/NC Four-Column Hydraulic Press is part of the M/NC Series, specially designed for increased accuracy and capacity, and manufactured for punching, deep drawing, piercing, and deburring applications.

STRUCTURE AND TABLE
• Comprised of three electro-welded blocks, made exclusively from S355JR steel.
• Stabilized and machined upon completion of welding to ensure perfect parallelism and precision.
• Calculated and designed with finite element software.
• Equipped with a SIEMENS SIMATIC S7 1200 PLC and a 7" HMI KTP-700 touch panel. This allows programming of power, ram stroke, and speeds, with a memory capacity of 300 presets for various work cycles.

CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-protection guides.
• Motorized hydraulic unit with two speeds and automatic cut-off of high speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A side-mounted pressure switch allows adjustment of the pressure best suited to each operation.
• Glycerin-filled tonnage gauge display.

ELECTRICAL INSTALLATION AND SAFETY
• The electrical control panel features mode selectors for manual, semi-automatic, or automatic operation, as well as an additional selector for high or low-speed operation.
• Equipped with PLC for internal control of motions and decompression timings.
• Operation is via a low-voltage electric two-hand control panel.
• Electrical and hydraulic operations are redundant and self-monitored, with an additional safety block and self-monitoring devices for actuation and safety. Includes inspection and certification for proper operation and safety distance verification for photocells.
• Safety is ensured by Category IV light curtains in the front work area, two fixed lateral safety guards, and a movable rear guard with a magnetic shut-off detector.
• The machine is equipped with an IXON system for online support in case of malfunctions or reprogramming.
• Ladder with upper catwalk for service access (scaffold).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.