Seramik pimler için presleme cihazı

Iwesa O-PC-SE-P

Press-in device for ceramic pins in rotor shafts

Operating principle:

The ceramic pins are fed by a vibrating bowl feeder via a pneumatic hose to an inspection station, where the position of any existing unilateral bore is checked using an optical sensor.
Incorrectly oriented parts are transferred by a pneumatic slide into a collection container.
Correctly oriented pins are then conveyed through another pneumatic hose to the separator of the press-in tool.

The actual pressing process is also performed pneumatically using a plunger guided by a roller bearing.
Initially, a manually adjustable pressure p1 is used to ensure that the pin is not pressed into the shaft too easily.
With a second manually adjustable pressure p2, the pin is then pressed up to the stop into the rotor shaft.
A disc spring package preloaded to 5,000 N prevents excessive force being applied to the pin and the shaft.
Iodpfx Adoib H U Dopetd

The rotor shaft must be manually inserted into, removed from, and clamped in the tool by an operator. This process is safeguarded by a safety light curtain.

Construction:
Self-supporting station integrated into a complete system for pressing ceramic pins and balls.

Rotor shafts
Ø: 5 - 20 mm
L: 50 - 200 mm

Ceramic pin
Ø: 3 mm
L: 5 +/- 0.2 mm

Cycle time
Output: 15 strokes per minute

Safety
Safety door with interlock switch
Category 4 light curtain
Emergency stop

Airborne noise emission
Continuous sound pressure at workstation: 70 dB (A)

Electrical connection
Voltage: 230 V AC
Frequency: 50 Hz
Fuse: 10 A

Compressed air connection
Operating pressure: 5 - 7 bar

Dimensions
L x W x H = 850 x 950 x 1020 mm
Weight: approx. 110 kg

Year of manufacture: 2003

Electrically height-adjustable worktable

Documentation and circuit diagrams available.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.