Konik dişli kesme makinesi

Klingelnberg C 28 P

Workpiece Data
Maximum workpiece diameter: 275 mm
Largest standard module: 6 mm
(at the pitch line in steel with 600–700 N/mm² tensile strength)
Smallest standard module: 1.5 mm
Maximum tooth width: approx. 5.5 mm
Maximum helix angle: approx. 60°
Maximum number of teeth: 120
Minimum number of teeth: 5
Maximum transmission ratio: 1:10
Minimum transmission ratio: 1:1

Technical Data
Dimensions and Weights
Space requirements (L x W x H): 5200 x 2300 x 2400 mm
(including all auxiliary units and control cabinet with doors open)
Net weight (including standard accessories): approx. 15,500 kg
Djdpexmgr Djfx Abpswc
Gross weight with standard accessories and overseas packaging: approx. 16,800 kg
Chip conveyor: 300 kg
Coolant tank with chip conveyor: 450 kg
Pressure filter (optional): 600 kg

Power and Connection Data
Total connected load: 75 kVA
Frequency: 50 Hz ± 1 %
Voltage: 3 × 400 V ± 10 %
Fusing: 100 A slow-blow
Voltage interruption: max. 3 ms
Voltage dip: max. 20 % of peak voltage for max. 20 ms
Voltage spikes: max. 200 % of rated voltage for 1.5 ms
Harmonic content: max. 10 % of effective value
Network symmetry (voltage difference between 2 phases): max. 2 % of rated voltage
Protective earth: interference-free
Control voltage: 24 V DC
Special versions: on request
Network versions: see Chapter 5.2
Connection location (installation and foundation plan): see Chapter 5.2

Air Supply
Pressure: min. 3.5 bar, max. 10 bar
Flow rate (with open nozzle): 0.03 Nm³/min
Humidity (max. pressure dew point): 10 °C
Temperature: 10 °C to 40 °C
Solid particle size up to: 40 µm
Connection and size: see Chapter 5 (Installation and Foundation Plan)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.