Injection molding machine

KraussMaffei KM 110-750 CX

Injection Moulding Machine Krauss Maffei KM 110-750 CX

Year of manufacture: 2007

Machine Description

The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit with a fully hydraulic clamping system. It is equipped with the MC5 control system featuring a color monitor, integrated control panel, and three USB ports.

The machine is fitted with a complete plasticising unit designed for processing thermoplastics, with an abrasion-resistant version. The screw (diameter 45 mm) is equipped with a non-return valve and open nozzle.

Technical Data
Clamping Unit
Parameter Unit Value
Clamping force kN 1100
Mould opening force kN 70.0
Movable platen stroke force – opening kN 35.4
Movable platen stroke force – closing kN 31.4
Platen dimensions (h × v) mm 745 × 770
Tie bar spacing (h × v) mm 470 × 470
Mould opening stroke mm 600
Mould height (min.) mm 300
Total daylight (max.) mm 900
Ejector stroke mm 150
Ejector force kN 22.6 / 9.9

Injection Unit
Parameter Unit Value
Screw diameter mm 45
Injection pressure bar 2336
Shot volume cm³ 318
Shot weight (PS) g 289
Screw speed (standard / option) rpm 265 / 355

Electrical and Hydraulic Equipment
Parameter Unit Value
Nominal pump motor power kW 22
Installed heater capacity kW 15.62
Number of cylinder heating zones - 5
Dry cycle time (Euromap) cycles/h 2000
Oil tank capacity l 489

Dimensions and Weight
Parameter Unit Value
Net weight with control cabinet t 6.2
Bedpjxqzz Usfx Al Iolp
Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.