Enjeksiyon kalıplama makinesi

KraussMaffei KM 1100-12000 MX

Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX

Basic Information

Manufacturer: Krauss Maffei
Model: KM 1100-12000 MX
Year of manufacture: 2008
Control system: MC5
Control panel: colour monitor integrated with control desk
Interfaces: 3 USB ports

The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for thermoplastics processing with abrasion protection.

Clamping Unit

Clamping force: 11,000 kN
Mould opening force: 770 kN
Platen dimensions (H × V): 2210 × 1910 mm
Tie bar clearance (H × V): 1550 × 1250 mm
Mould opening stroke: 2,000 mm
Minimum mould height: 600 mm
Maximum mould height: 1,200 mm
Platen movement stroke: 2,600 mm
Ejector stroke: 300 mm
Ejector force: 220 / 110 kN

Injection Unit

Screw diameter: 120 mm
Maximum injection pressure: 1,758 bar
Injection volume: 6,786 cm³
Shot weight (PS): 6,175 g
Screw speed (standard/option): 103 / 145 rpm
Injection rate (standard): 1,118 cm³/s
Injection rate (accumulator): 1,696 cm³/s

Electrical and Hydraulic Equipment

Pump motor rated power: 132 kW
Installed heater power: 82 kW
Number of cylinder heating zones: 7
Number of dry cycles (EUROMAP): 802 cycles/h
Hydraulic oil tank capacity: 2,440 l

Machine Dimensions and Weight

Net weight (with control cabinet): 73 t
Machine dimensions (L × W × H):
12.47 × 3.65 × 2.82 m

Optional Energy Saving System ESS (Energy Saving Systems)
Gjdpfx Aheyugfze Tjip

The machine can be fitted with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines.

The system controls the operation of the hydraulic pump motor by means of a frequency inverter, adjusting the motor speed to the actual demand during the production cycle.

Primary Benefits

- Reduction of electricity consumption by up to 30%
- Servo drive technology for hydraulic pumps
- Global quality and proven technology used in plastics processing industry
- Reduced energy loss during idle operation
- Less heating of the hydraulic system
- Extended service life of motor and hydraulic components
- Can be retrofitted on existing hydraulic injection moulding machines

The ESS system allows for significant reduction of machine operating costs while maintaining full production parameters.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.