Enjeksiyonlu kalıp makinası

KraussMaffei KM 500-4300 GX

Injection Moulding Machine – Krauss Maffei KM 500-4300 GX
Year of manufacture: 2025

Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen.
PV – injection unit control.
MC6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a full-color touchscreen display.

Plasticizing Unit

Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle.

Nozzle radius: 15 mm

Nozzle orifice: 6 mm

Technical data (standard version)

Chodpfx Aexdd S Nod Nod
Clamping unit

Clamping force: 5,000 kN

Opening force: 350 kN

Platen dimensions (H x V): 1,430 x 1,350 mm

Tie bar spacing (H x V): 1,040 x 910 mm

Opening stroke: 1,350 mm

Mould height (min.–max.): 400–950 mm

Daylight (maximum opening): 1,750 mm

Ejector stroke: 250 mm

Ejector force forward/backward: 95 / 49 kN

Injection unit

Screw diameter: 90 mm

L/D ratio: 20.0

Injection pressure: 1,839 bar

Injection volume: 2,290 cm³

Shot weight (PS): 2,084 g

Injection speed: 100 mm/s

Injection throughput: 636 cm³/s

Screw speed (standard): 195 rpm

Plasticizing capacity (at standard screw speed): 134 g/s

Nozzle contact force: 129 kN

Electro-hydraulic system

Pump motor power: 90 kW

Installed heater capacity: 44 kW

Number of heating zones (barrel): 7

Dry cycle time (Euromap 6): 2.8 s / 728 mm

Dry cycle time (KM standard): 2.5 s / 520 mm

Hydraulic oil capacity: 1,180 l

Linear Robot – Krauss-Maffei LRX 250

Payload < 25 kg (gripper + drives + parts)

Part depositing on operator-opposite side

Axes:

X axis (from mould): 900 mm, servomotor

Y axis (vertical, telescopic, with motor brake): 1,000/1,000 mm, servomotor

Z axis (cross): 2,500 mm, servomotor

Dimensions and weight

Net weight (with control cabinet): 25.0 t

Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.