Krauss Maffei KM650-4300 GX (2013)

KraussMaffei KM650-4300 GX

Machine KraussMaffei KM650-4300 GX

Clamping force (kN): 6500

Tie bar spacing (h x v) mm: 1110 x 960

Mold opening stroke (mm): 1450

Minimum mold height (mm): 450

Maximum mold height (mm): 1000

Ejector stroke (mm): 250

Screw diameter (mm): 90 (for mixing HPS-M)

L/D ratio: 20

Injection pressure (bar): 1839

Shot volume (cm³): 2290

Control version: MC5

Display language: German

Condition: Tested, operational


Equipment:

- Anti-vibration leveling pads
- BluePower – Servo pump drive for reduced energy consumption
- Wear-resistant softener, optional extra
- BluePower – Complete insulation of the plasticising cylinder for reduced energy consumption
- 2x pneumatic valves on the moving platen for blow function
- 2x pneumatic valves on the fixed platen for blow function
- Pneumatic cascade control, 4-fold for hot runner system
- Hydraulic cascade control, 4-fold for hot runner system
- Conveyor belt control
- Mechanical robot interface according to EUROMAP 18
- Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins
- Hydraulic core pull system, 2-fold on moving platen
- Hydraulic core pull system, 2-fold on fixed platen
- Pneumatic core pull system, 1-fold on moving platen
- Pneumatic core pull system, 1-fold on fixed platen
- Pressure relief for hydraulic core pulls
- Pressure relief for hydraulic cascade valves
- 20 hot runner control circuits
- Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A)
- Volt-free contact for 'plasticising' signal at HAN 3A socket
- Changeover to holding pressure depending on mold cavity pressure (Kistler)
- Quality statistics
- Chip card reader
- Diagram display and analysis package with 10 diagrams
- Trend chart
- PV control
- Production data interface consisting of 5 volt-free contacts in the control cabinet
- 3 freely programmable inputs and outputs in the control cabinet


KraussMaffei Linear Robot LRX 350:

- Fully integrated control
- Horizontal stroke: 4000 mm
- Vertical stroke (telescopic): 2000 mm
- Demoulding stroke: 1200 mm
- Maximum payload: 35 kg
Bdedpfx Asy Apdqsi Sei

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.