Tarım makinesi

Kugelmann KG-D301

Three-point Spreader D301 0.3 m³

Description:
Spreader with three-point hitch CAT1 and a single spreading material chamber. Material feed is via auger, and distribution is handled by the patented spreading disc unit. Hydraulically driven motors are controlled via a Kugelmann hydraulic block. All drives can also be operated manually without a control unit using emergency hand operation. The chain drive ensures high torque when starting the auger. Corrosion-resistant material combination with a stainless steel (VA) subframe and spreading material container made of plastic. The support legs can be folded up towards the spreader during operation.

Hydraulically driven single-chamber spreader with auger conveyor and spreading disc.
> Corrosion-resistant combination of stainless steel subframe and plastic spreading material container.
> Dimensions (W x D x H) 1080 x 590 x 1200 mm.
> Unladen weight 178 kg
> Incl. apron / splash guard
> Incl. tarpaulin roof
> Incl. lighting compliant with StVZO
> RAL 2011
> Emergency manual operation
> Folding support legs
> Low energy consumption
> Can be operated with a hydraulic flow rate as low as 15 l/min
> Patented spreading disc unit
> Manual spreading pattern adjustment
> Winter service marking with reflective white warning foils
> Operation possible without control unit (using the control cabinet key on the easily accessible side)
> Mounting to CAT1

Standard Equipment:
- Hydraulic drive for feed auger and spreading disc
- Subframe made of stainless steel with signal paint RAL 2011
- Stainless steel spreading disc
- Plastic spreading material container
- Plastic spreading disc guard
- Wire mesh
tarpaulin roof
- Apron
- LED lighting as per StVZO
- Folding support legs (remain attached to device during use)
- Manual spreading pattern adjustment
- Winter service marking
- Operation without control unit possible
- All drives are regulated and equipped with emergency manual operation
- Hydraulic hoses with SVK hydraulic couplers for supply and return
- Spreader is fully stand-alone

Requirements for carrier vehicle:
- Min. 20 l/min with reduced spreading output
- Max. 50 l/min with external oil cooler
Dedpfx Aox S Tpvedmoul
- Kugelmann unit internally protected at 230 bar
- Carrier vehicle with mounted machine must not exceed permissible axle load and gross weight

Optional Equipment:
- k-basic 2 control unit
- Loose cable harness
- Microprocessor control with CAN-BUS technology.
- Closed-loop regulation of all drives (with feedback).
Functions:
> Adjust spreading width
> Adjust spreading density
> Beacon on/off
> Work light on/off
> Spreader operating/pause mode
> Backlit buttons and rotary controls
> Data recording
> Speed simulation
> x2 speed-dependent spreading mode button for k-basic 2 control

Option for speed-dependent spreading including start/stop function.
A travel signal is required!

Worklight LED 12V

Stock location: null

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.