Cam taşlama makinesiLisec
WRA-1000
Cam taşlama makinesi
Lisec
WRA-1000
Üretim yılı
2015
Durumu
Kullanılmış
Konum
Sankt Valentin 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Cam taşlama makinesi
- Makine üreticisi:
- Lisec
- Model:
- WRA-1000
- Seri numarası:
- 318-082691
- Üretim yılı:
- 2015
- Durumu:
- yenilenmiş (kullanılmış)
- Işlevsellik:
- tamamen fonksiyonel
Fiyat ve Konum
- Konum:
- Gutenhofen 4, 4300 St.Valentin, Österreich

Ara
Teklif detayları
- Listeleme kimliği:
- A209-20777
- Son güncelleme tarihi:
- 13.01.2026
Açıklama
150 l/min water throughput
1000 l settling tank
Gijdpox Trrljfx Aduel
System for cleaning contaminated water originating from CNC machines.
The contaminated water is conveyed from the CNC machines to the WRA-1000 by means of lifting pumps. Before entering the treatment unit, a flocculant is continuously and automatically added, which is thoroughly mixed with the wastewater by an integrated mixer.
The integrated lamella pack inside the WRA-1000 enables a short settling time for the flocculated contaminants. The sludge accumulates in the cone section of the WRA-1000 and is automatically discharged at preset intervals into the sludge big-bag located below. During this process, excess water is pumped back into the system by an integrated lifting pump, thereby reducing wastewater losses to a minimum.
The water purified by the WRA-1000 then flows into the collection tank of the CNC system. From there, the treated water can be reused by the CNC machines’ pumps and piping systems for further processing operations.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
1000 l settling tank
Gijdpox Trrljfx Aduel
System for cleaning contaminated water originating from CNC machines.
The contaminated water is conveyed from the CNC machines to the WRA-1000 by means of lifting pumps. Before entering the treatment unit, a flocculant is continuously and automatically added, which is thoroughly mixed with the wastewater by an integrated mixer.
The integrated lamella pack inside the WRA-1000 enables a short settling time for the flocculated contaminants. The sludge accumulates in the cone section of the WRA-1000 and is automatically discharged at preset intervals into the sludge big-bag located below. During this process, excess water is pumped back into the system by an integrated lifting pump, thereby reducing wastewater losses to a minimum.
The water purified by the WRA-1000 then flows into the collection tank of the CNC system. From there, the treated water can be reused by the CNC machines’ pumps and piping systems for further processing operations.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2022
İstek gönder
Telefon & Faks
+43 676 3... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu












