Depolama asansörleri için kontroller

fse-Lifte Alle Typen

Üretim yılı: 2005, durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient processing of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter with 50 mm diameter, angular head or special milling cutter with max. 100 mm diameter); Six-sided machining; Underside machining with angular head (option); Rapid positioning (up to 60 m/min) of the machining unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically pivoting stops; Standard with automatic central lubrication system; Stable machine bed for 6,000 mm working length; Continuous support table; Clamping system with integrated six-row roller recirculating units and linear guides. 5-axis industrial PC control, including Kdodpfx Aow A Rv Isafou 3 axes as path control; Highly dynamic three-phase AC servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color monitor and floppy disk drive; Storage capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ45 connection (network hookup to be provided by customer's administrator) Analog modem (customer must provide analog phone line) Technical Data: Travel range X-axis: max. 6,240 mm Max. travel speed: 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed: 30 m/min Travel range Z-axis: 635 mm Max. travel speed: 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on the milling area, see Drawing No. 150 05 17 08 Max. machining length for end face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper size. Included Accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically pivoting material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with holder Angle milling head Important: The profile machining center is equipped as standard with front light barrier safety. For any required side or rear safety, it is the customer's responsibility or please request our offer for safety fencing. Incl. Angle milling head for underside machining