Kullanılmış Imperial Smd016 satın al (77)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Ubstadt-Weiher
2.396 km
Tezgah torna (merkez torna)
WeilerCommodor Geometrisch Überholt
Çağrı
Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Refurbished with Inspection Protocol for New Machine Tolerances
Technical Data:
>> Machine No. 2268-87
>> Center Height: 180 mm
>> Center Distance: 1000 mm
>> Spindle Speeds: 13 to 2000 rpm
>> Spindle Bore: 56 mm
>> Short Taper Spindle Nose DIN 55029, Camlock
>> Tailstock Morse Taper: MK4
>> Feed Range: 0.026 to 0.888 mm/rev
>> Thread Types Possible: Metric, Imperial, Module, and Diametral Pitch
>> Metric Thread Pitch Range: 0.35 to 12 mm
>> Weight approx. 1500 kg
>> Spindle Brake, switchable
>> Drive Power: 2.0/4.0 kW
>> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m
Accessories and Features:
Pgsdsymznhepfx Anxjk
>> 3-Axis K&C digital readout, new, with 12 months manufacturer warranty, operating instructions included
>> 200 mm 3-jaw chuck, NEW, with 2 sets of jaws
>> Multifix size B quick-change toolpost with 3 NEW tool holders
>> Bed stop
>> Machine leveling feet
>> Coolant system
>> LED machine lamp
For safety, the machine is equipped with:
>> Electronic spindle guard
>> Spindle brake
>> 2 emergency stop switches
On request: Covers for the lead and feed screw shafts
About the Machine:
Offered is a Weiler Commodor Lead and Feed Screw Lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Handover with test protocol. Painted in 2K high gloss white. The Multifix tool post and chuck are new.
Safety features: The machine is equipped with a brake motor, electronic spindle guard and two emergency stop switches – an absolutely as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.
Küçük ilan
Bruchsal
2.400 km
Kılavuz/çekme milli torna tezgahı / NARDINI MS
NARDINIMS 125 E
Çağrı
Koşul: iyi (kullanılmış), NARDINI MS 125 E / Engine Lathe with Lead and Feed Screw
- Center height over bed: 150 mm
- Swing over cross slide: 140 mm
- Distance between centers: 500 mm
- Bar capacity: 34 mm
- Spindle speeds: 50 – 2500 rpm
- Automatic longitudinal and cross feeds
- Threading / Metric / Inch etc.
- Tailstock Morse taper 3
- Quick collet clamping device Type 173E incl. 16 collets
Pedpfx Anoyam Sloxsgk
- Multifix quick-change toolpost with inserts
- Change gears
- Tool cabinet incl. various tools
- Machine leveling feet
- Chip guard at rear
- Drill chuck & live center
- Work lamp
- Documentation
Dimensions:
LxWxH 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg
Subject to errors and omissions
Küçük ilan
Siedlce
1.776 km
Torna-freze makinesi
CORMAKTokarko-frezarka TYTAN CENTER 750 VARIO
Çağrı
Koşul: yeni, Üretim yılı: 2026, The TYTAN CENTER 750 Vario lathe-milling machine is a combination of two machines, providing user convenience and saving workspace. It features stepless speed adjustment for the lathe-milling spindle. Turning capacity: 250x750mm, 0.75 kW/230V; Milling capacity: 0.6kW/230V. Turning functions include machining of external and internal cylindrical surfaces, thread cutting, and cutting of blanks. Milling functions include groove milling, drilling, and reaming operations. This machine is designed for use in small industrial enterprises, workshops, garages, etc.
Main features of the machine:
- Combines two functions—turning and milling—in a single, compact structure.
- Separate spindle motors for lathe and milling operations, both with stepless speed control—enabling independent use of both functions.
- LCD displays for monitoring and precise setting of spindle speeds.
- Two spindle speed ranges—suitable for various materials and processing methods.
- Machining of complex parts—without the need for repositioning on another machine.
- Rigid dovetail guide—ensures high stability during milling.
Technical specifications
LATHE
3-jaw chuck: 125 mm
Swing over bed: 250 mm
Swing over cross slide: 150 mm
Distance between centers: 750 mm
Bed width: 135 mm
Spindle bore: 29 mm
Spindle taper: MT4
Spindle speed regulation: Stepless (2 ranges)
Spindle speeds: 50–1125 / 100–2250 rpm
Metric threads: (18) 0.2–3.5 mm
Imperial threads: (21) 8–56 TPI
Longitudinal feed: (6) 0.07–0.4 mm/rev
Tool post dimensions: 65 x 65 x 20 mm
Max. tool size: 12 x 12 mm
Top slide travel: 70 mm
Cross slide travel: 130 mm
Longitudinal slide travel: 630 mm
Tailstock quill diameter: 30 mm
Tailstock quill stroke: 70 mm
Tailstock taper: MT2
Motor power (S1/S6): 0.75 / 0.9 kW / 230 V
MILLING MACHINE
Max. drilling diameter: 16 mm
Quill taper: MT2
Quill travel: 50 mm
Head tilt: –90° to +90°
Spindle-to-column distance: 170 mm
Spindle-to-table distance: 43–250 mm
Spindle speed range: 50–2250 rpm
T-slot (number and size): 2 x 8 mm
Motor power: 0.6 kW / 230 V
GENERAL PARAMETERS
Machine dimensions (LxWxH): 1350 x 580 x 1630 mm
Weight: 230 kg
Standard equipment:
- 125 mm 3-jaw lathe chuck + reverse jaws
- Machine base
- Fixed center MT2 and MT4
- Drill arbor and chuck MT2/B16
- Change gears
Psdpfx Anjw H Rdmjxegk
- Set of wrenches, lubricator, maintenance tools
- Guards compliant with CE standards

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Siedlce
1.776 km
Üniversal konvansiyonel torna tezgahı
CORMAKCORMAK 500 x 1000 / 80
Çağrı
Koşul: yeni, Üretim yılı: 2026, Universal Lathe CORMAK 500 x 1000 (CJ6250C x 1000) is a robust and precise conventional metal lathe designed for professional machining in industrial plants, toolrooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable performance both in single-piece and series production.
Main advantages of the machine:
- Induction-hardened bed resistant to torsion and vibration—ensures machining accuracy.
- Removable gap bridge, allowing machining of components up to 630 mm in diameter.
- Modern headstock with ball bearings for stable operation at high speeds.
- Precise adjustment of spindle speed and feeds—full control over process parameters.
- Rapid longitudinal and cross feeds—for increased efficiency.
- 3-axis digital readout facilitates dimensional control and reduces setup time.
- Extensive threading capability—metric, imperial, module, and D.P. threads.
- 5.5 kW main motor—high power for demanding material processing.
Standard equipment:
- 3-axis digital readout
- 3-jaw self-centering lathe chuck, Ø 250 mm
- Fixed steady rest
- Travelling steady rest
- Spindle reduction sleeve
- Foot-operated safety brake
- Full-length chip guard
- Coolant system
- 24V halogen work light
- Thread dial indicator
- Set of tools
Psdoxd Upxopfx Anxogk
- EC Declaration of Conformity
- Operating manual
- Factory new machine under warranty
Technical specifications:
Swing over bed: 500 mm
Swing over cross slide: 325 mm
Swing in gap: 630 mm
Length of gap: 260 mm
Max turning length: 1000 mm
Bed: Induction hardened
Bed width: 330 mm
Lathe chuck diameter: 250 mm
Spindle bore: 80 mm
Spindle nose: D1-8 CAMLOCK
Spindle speed range: 24–1600 rpm
Max tool size: 25 x 25 mm
Longitudinal feed range: 0.072–4.038 mm/rev
Cross feed range: 0.036–2.019 mm/rev
Cross slide travel: 305 mm
Compound slide travel: 130 mm
Metric threads: 1–192 mm
Imperial threads: 0.5–28 TPI
Module threads: 1–56 mm
D.P. threads: 8–56
Tailstock quill diameter: 65 mm
Tailstock quill travel: 120 mm
Tailstock taper: MT 5
Digital readout: 3 axes
Main motor power: 5.5 kW
Coolant pump power: 0.1 kW
Weight: 1700 kg
Küçük ilan
Siedlce
1.776 km
Üniversal konvansiyonel torna tezgahı
CORMAK660X2000
Çağrı
Koşul: yeni, Üretim yılı: 2026, Main Advantages of the CORMAK 660 x 2000 Universal Lathe (C6266/2000)
- Electromagnetic foot brake guarantees the highest level of safety and significantly reduces downtime by enabling quick and reliable stopping of the lathe.
- Rapid longitudinal and cross feeds drastically shorten tool travel times, boosting machining efficiency and operator comfort.
- Versatile applications — external and internal turning, taper turning, threading (metric, imperial, module, DP), drilling, broaching, and polishing.
- Hardened and ground cast iron bed, 400 mm wide, ensures maximum vibration reduction and high machining accuracy.
- Large spindle bore of Ø105 mm and D1-8 nose allow machining of shafts and parts with large diameters.
- High drive power — spindle motor 7.5/9 kW guarantees stable operation during heavy cutting tasks.
- Wide threading range without the need to change gear wheels — saves time and increases production flexibility.
- 3-axis digital readout (DRO) increases setup precision and control over turning processes.
Standard Equipment
- 3-axis digital readout (DRO)
- 315 mm 3-jaw lathe chuck
- 400 mm 4-jaw lathe chuck
- 400 mm faceplate
- Fixed and travelling steady rests
- Coolant system and work light
- Operating manual in Polish and CE declaration
Optional Equipment
- 25 x 25 mm turning tool set — 7 pcs
- Precision live center MK5
- Grinding attachment for shafts and bores
- Cutting fluids and machining oils
Pedpfx Aneyk Dabjxjgk
Specifications
- Swing over bed: Ø 660 mm
- Swing over cross-slide: Ø 455 mm
- Swing with gap bridge removed (diameter × width): 885 × 170 mm
- Centre height: 330 mm
- Distance between centers: 2000 mm
- Bed width: 350 mm
- Max. cutting tool cross-section: 25 × 25 mm
- Total cross slide travel: 355 mm
- Total top slide travel: 130 mm
- Spindle bore: Ø 105 mm
- Spindle nose: D1-8
- Spindle Morse taper: Ø 113 mm (1:20)
- Number of spindle speeds: 12
- Spindle speed range: 25–1500 rpm
- Leadscrew diameter and pitch: Ø 40 mm × 6 mm
- Imperial thread pitches: 2–112 tpi (60 settings)
- Metric thread pitches: 0.2–14 mm (47 settings)
- DP threads: 4–112 DP (50 settings)
- Module threads: 0.1–7 MP (39 settings)
- Longitudinal feed: 0.059–1.646 mm/rev (35 settings)
- Cross feed: 0.020–0.573 mm/rev (35 settings)
- Tailstock quill total travel: 180 mm
- Tailstock quill diameter: Ø 75 mm
- Tailstock quill taper: Morse taper no. 5
- Spindle drive motor: 7.5 kW (10 HP) 3 PH
- Coolant pump motor: 0.1 kW (1/8 HP)
- Required installation space (L × W × H): 334 × 115 × 151 cm
- Packing dimensions (L × W × H): 340 × 115 × 182 cm
- Weight: 3200 kg
Küçük ilan
Ubstadt-Weiher
2.396 km
Tezgah torna (merkez torna)
WeilerPraktikant 140B
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1989, Fonksiyonellik: tamamen fonksiyonel, Weiler Praktikant 140 B Lead and Feed Screw Lathe – Toolmaker Precision with NEW K&C 3-Axis Digital Readout!!!
Technical Data:
>> Year of Manufacture: 1989, Machine No. 89-140-1471
>> Center Height: 140 mm
>> Distance Between Centers: 650 mm
>> Spindle Speeds: 24 to 2,500 rpm
>> Spindle Bore: 40 mm
>> Short Taper Spindle Head, DIN 55027 Size 5, with bayonet lock
>> Tailstock Morse Taper: MK 3
>> Feeds: 0.02 to 0.63 mm/rev
>> Thread Types: Metric, Imperial, Module, and Diametral Pitch
>> Metric Thread Pitch: 0.25 to 8 mm
>> Weight: approx. 680 kg
>> Switchable Spindle Brake
>> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m
Accessories and Features:
>> NEW K&C 3-axis digital readout with 12-month manufacturer's warranty and user manual
Functions: mm/inch selection, ABS/INC mode, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching
>> NEW collet chuck set, collets from 3 to 25 mm in 1 mm increments (NEW)
>> 160 mm 3-jaw chuck with 1 set of jaws
>> Multifix quick-change toolpost, size A, with 2 tool holders
>> Face plate
>> Bed stop
>> Rear splash guard
Pgedpfx Ansymdymsxek
>> Machine feet
>> Electronic spindle protection
>> Operating manual
Safety Features:
Electronic spindle protection, lead and feed screw covers, 2 emergency stop switches, spindle brake, electronic gear cover safety interlock
About the Machine:
Offered is a Weiler Praktikant 140 B Lead and Feed Screw Lathe, in very good condition. This well-maintained lathe comes from a training workshop. All slides move smoothly and evenly. The Weiler runs quietly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.
Küçük ilan
Casteggio - Pv
2.252 km
Minibüs
IVECODAILY 35C16 BTor 2.3 HPT PL-RG Cabinato
Çağrı
Koşul: ikinci el, kilometre: 413.000 km, güç: 118 kW (160,44 bg), yakıt türü: dizel, vites türü: mekanik, ilk tescil: 06/2017, yükleme alanı uzunluğu: 420 mm, emisyon sınıfı: Euro 6, renk: beyaz, Üretim yılı: 2017, Donanım: hidrolik arka platform, hidrolik direksiyon, klima, merkezi kilitleme, KASA YAN KAPAKLI VE KABİN ÜSTÜ YÜK ALANI (İMPERYAL) OLAN ARAÇ. YAN KAPAK MARKASI DHOLLANDIA. ARAÇ, BULUNDUĞU DURUMDA GÖRÜLDÜĞÜ GİBİ SATILMAKTADIR. YOL TESTİ İMKANI MEVCUTTUR. KDV %22 HARİÇTİR. KASA UZUNLUĞU: 4,2 METRE. ÇİFT TEKERLEKLİ ARKA AKS. SATIŞ FİYATINA DEVİR ÜCRETİ DAHİL DEĞİLDİR. FAYDALI YÜK: 700 KG.
Pedpfx Aeytkfvjnxjgk
Küçük ilan
Bochum
2.576 km
Cnc torna tezgahı
OkumaGenos L400 II-e
Çağrı
Üretim yılı: 2022, Koşul: mükemmel (kullanılmış), Makine Özellikleri
İnç
Metrik
CNC Kontrolü
Evet
Kontrol Tipi
OSP-P300LA-e
# Eksen
2
Dönme Çapı (Swing)
20,47"
Torna Çapı
16,14"
Merkezler Arası Mesafe
43,31"
Ayna Çapı
10"
Bar Kapasitesi
3,15"
X Ekseni Hareket Mesafesi
9,05"
Pgjdpfxeymq Uko Anxek
Z Ekseni Hareket Mesafesi
45,04"
Mil Flanşı
A2-8
Mil Devir Hızı
3.000 dev/dak
Ana Motor
20 HP
Taret Kapasitesi
12
Torna Puntası (Evet/Hayır)
Evet
Küçük ilan
Danimarka
2.697 km
Torna makinesi Ø 2000 x 35.000 x 63 ton
SKODASUT 200 TD
Çağrı
Koşul: ikinci el, Üretim yılı: 1984, arabada tur dönme çapı: 1.600 mm, torna çapı: 2.000 mm, kaydırmaz yatak üzerindeki torna çapı: 2.000 mm, torna boyu: 35.000 mm, iş parçası ağırlığı (maks.): 63.000 kg, Centre Lathe
SKODA - SUT 200 TD
Psdpfx Aeynky Aenxsgk
MACH-ID 9446
Manufacturer: SKODA
Model: SUT 200 TD
Year of Manufacture: 1984
Tandem construction on a single bed: left headstock + right headstock
Mirror-image double tailstock left and right
Dual carriage
Steady rest included
Roller rest included
Operator panel with scales requires attention and replacement
Motorized tailstock on both left and right sides
Three-way bed construction
Torque on chuck: 160,000 Nm
Minimum turning diameter: Ø 315 mm
Field of Application:
Shipbuilding (shipyards)
Propeller shafts
Hydraulic cylinder shafts
Camshafts
Defense & Aerospace
Rolls and shafts for steel mills
Crankshafts
Specifications
Metric | US Standard
Turning length: 35,000 mm
Swing over bed: Ø 2,000 mm
Swing over cross slide: 1,600 mm
Spindle power: 75 kW
Bed width: 1,600 mm
Quill diameter: 400 mm
Quill stroke: 250 mm
Spindle speed: 180 rpm
X-axis feed: 5,000 mm/min
Z-axis feed: 5,000 mm/min
Workpiece weight: 63,000 kg
Dimensions (approximate)
Length: 42,000 mm
Width: 3,250 mm
Height: 3,250 mm
Weight: 158,000 kg
Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, this information does not constitute representation or contractual terms. We recommend you verify all critical details.
Küçük ilan
Trittau
2.490 km
Tezgah torna (merkez torna)
WeilerDA 210 AC
Çağrı
Koşul: ikinci el, Üretim yılı: 2013, kaydırmaz yatak üzerindeki torna çapı: 435 mm, üst kızak üzerinde tornalama çapı: 245 mm, merkez yüksekliği: 210 mm, merkez genişliği: 1.500 mm, toplam ağırlık: 1.700 kg, Technical Data
Brand: Weiler
Model: DA 210 AC x 1500
Year of manufacture: 2013
Swing over bed: 435 mm
Swing over cross slide: 245 mm
Centre height: 210 mm
Centre distance: 1500 mm
Spindle bore: 52 mm
Speed range: 20 – 2,500 rpm, stepless
Drive power: 10.5 kW
Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m
Weight: 1.7 t
Equipment
• Stepless speed control
• HEIDENHEIN 3-axis digital readout
• 3- and 4-jaw chucks by Röhm Duro
• Multifix tool post + 10 holders
• Fahrion collet chuck + approx. 33 collets
• Fixed and travelling steady rests
• Various live and dead centres + drill chuck
• Coolant system
• Documentation
The Heidenhain ND 780 numerical position display
• 3-axis readout for bed, cross slide, and top slide
• Tool memory for 16 tools, each with a reference point per axis
• Summation key for Z and Zo
• Switchable between inch/metric
• Plan path X displayed as radius or diameter
Pgodpfx Anoykakpsxek
• Delta key “remaining travel to zero”
• Display resolution up to 1 µm
• "Freeze" actual position
• Taper calculator
All information without guarantee. A live demonstration under power is possible at any time in our showroom.
Küçük ilan
Avusturya
1.826 km
Merkez torna tezgahı
ZMMC 10 T.14
Çağrı
Koşul: yeni, Condition: new
Delivery time: approx. 4 months from order
Country of origin: Bulgaria
Price: €131,720
Lease rate: €2,489.51
Swing over bed: 1,020 mm
Distance between centers: 2,000 mm
Center height: 510 mm
Spindle bore: 358 mm
Swing over cross slide: 770 mm
Bed width: 560 mm
Spindle taper: 361 M
Number of spindle speeds: 12
Spindle speed range: 6.3 – 31 rpm
Number of feeds: 2
Longitudinal feed: 0.039 – mm/rev
Cross feed: 0.02 – 7.5 mm/rev
Number of threads: 76
Metric thread range: 0.5 – 0 mm
Imperial thread range: 60 – 1/5 TPI
Module thread range: 0.125 – 37.5
DP thread range: 240 – 4/5
Psdpfx Aowiq Drenxjgk
Cross slide travel: 505 mm
Top slide travel: 270 mm
Tailstock quill diameter: 105 mm
Tailstock taper: Morse 6
Tailstock quill travel: 225 mm
Motor power: 18.5 kW
Weight: 6,400 kg
The primary purpose of this lathe type is for the machining of pipes. Accordingly, this machine type is widely used in the oil industry.
Pipe thread lathes have extensive capabilities for machining threaded joints on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping of pipes with two chucks and the supplied steady rests enables the machining of pipes with considerable lengths. Suitable for the manufacturing of components and systems for the oil and pipeline industries as well as for the maintenance of such systems.
Features:
- Drive via geared transmission
- Electrodynamic brake
- Fagor 3-axis digital readout
- Quick-change tool post Amestra type D1, Multifix-compatible system incl. 4 holders (3x rectangular, 1 round)
- 2 pcs Bison 3-jaw chucks, model 3295, Ø 660 mm, at both spindle ends
max. 250 rpm, clamping range 5 – 400 mm (Option: special hard external jaws, clamping range 80 – 400 mm)
- 2 pcs. steady rests on stands, Ø 160 – 360 mm with rollers
- Rapid traverse (4)
- Longitudinal stop for single position
- Taper turning device
- Coolant system
- Rear chip guard along full length
- Leadscrew and feed rod cover
- Chuck guard
- Tool post guard
- Leveling bolts and plates
- Tailstock
- Reducing sleeve for tailstock quill
- Mechanical tailstock travel with handwheel
- Low voltage machine lamp
- Operating manual
- Equipment in accordance with CE
Other models available on request with spindle bores from 5 to 358 mm, center distances from 1,000 to 6,000 mm, and swings from 730 to 1,020 mm.
Küçük ilan
Avusturya
1.826 km
Merkez torna tezgahı
ZMMC 400 TM
Çağrı
Koşul: ikinci el, Üretim yılı: 2020, Condition: used
Year of manufacture: 2020
Stock number: 1658
Delivery time: immediate, subject to prior sale
Country of origin: Bulgaria
Price: €26,500
In stock: 1
Special price: €22,600
Swing diameter over bed: 400 mm
Distance between centers: 1,000 mm
Center height: 200 mm
Spindle bore: 52 mm
Swing diameter over cross slide: 235 mm
Bed width: 320 mm
Spindle mount / DIN 55027: No. 6
Spindle taper: 6 M
Number of spindle speeds: 12
Spindle speed range: 50 – 2,240 rpm
Number of feeds: 80
Longitudinal feed: 0.015 - 0.6 mm/rev
Pgodjwirdtopfx Anxjk
Cross feed: 0.0075 - 0.3 mm/rev
Number of threads: 40
Metric thread range: 0.25 – 7.5 mm
Imperial thread range: 120 – 4 TPI
Module thread range: 0.0625 – 1.875
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock taper: 4 MT
Tailstock quill travel: 100 mm
Motor power: 4 kW
Length: 2,750 mm
Width: 1,100 mm
Height: 1,600 mm
Weight: 1,540 kg
This machine is in use in our workshop for repair work, thus it has been used very little so far (original price €36,070.00).
Drive via geared transmission
3-axis digital readout Fagor 40i
Quick-change tool post Multifix type B incl. 4 holders (3 rectangular, 1 round)
3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
Spindle nose No. 6 according to DIN 55027
Rapid traverse (4 directions)
Fixed centre
Coolant system
1 flange plate for chuck Ø 200 mm
1 adapter sleeve
Rear chip guard along the full length
Leadscrew and feed rod cover
Chuck guard
Toolholder guard
Levelling bolts and plates
Tailstock with quick-clamping
Low-voltage machine lamp
Operating manual and machine labels in GERMAN
Equipment in compliance with CE standards
Küçük ilan
Hallstadt
2.273 km
Merkez torna tezgahı
optimumTH5620V
Çağrı
Koşul: ikinci el, Üretim yılı: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, visible signs of wear
- Hardened and ground Z-axis guideways
- Spindle mount: Camlock DIN ISO 702-2 No. 8
- Precision-machined carriage
- Handwheels with adjustable fine graduation, 0.04 / 0.02 mm
- All guideways adjustable via gib strips
- Shafts, gears, and main spindle run in oil bath
- Cross-slide travel range ± 90°
Pgjdpfxex Dzxas Anxok
- Guaranteed spindle nose concentricity better than 0.015 mm
- Gear wheels: Smooth running, hardened and ground, supported with 2 adjustable precision tapered roller bearings
- Clearly arranged selection levers for feed speed adjustment
- Enclosed rapid-shift feed gearbox design
- Gears and shafts are hardened and ground, running in oil bath with precision bearings
- Switch with lifecycle calculation, tested according to EN ISO 13849
- Bed carriage direction reversible (right/left) via changeover spindle
- Central lubrication system in the bed carriage
- Leadscrew cover
- Emergency stop impact switch, motor protection switch, lockable main switch
- Tailstock quill and handwheel with adjustable fine graduation, 0.025 mm
- Fast, easy, and tool-free adjustment via clamping lever
- Heavily ribbed prismatic bed, inductively hardened and precision ground, made from cast iron
- Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN
- LED machine lamp inside chip guard
- Two gearbox speed ranges
- Spindle bore / bar passage: Ø 105 mm
- Siemens Sinamics frequency inverter / Safety Integrated
- Energy chain for gentle cable and hose routing
- Thread dial indicator scale adjustable
- Quick-change tool post SWH 7-C
- 1 tool holder 32 x 150 Type D, for 25 mm square tools
- Digital position display DPA 21
- Glass linear scales
Dimensions and weights:
- Length approx.: 3450 mm
- Width/depth approx.: 1150 mm
- Height approx.: 1650 mm
- Weight approx.: 2560 kg
Working ranges:
- Center height: 280 mm
- Distance between centers: 1910 mm
- Swing over bed: 560 mm
- Swing in bed gap: 790 mm
- Swing over cross slide: 355 mm
- Turning length in bed gap: 170 mm
- Bed width: 350 mm
Speed range:
- Number of speed ranges: 2
- Speed range: 25–1600 rpm
- Speed control: electronically adjustable
Electrical data:
- Output (motor power): 7.5 kW
- Total connected load: 8.5 kW
- Supply voltage: 400 V
- Mains frequency: 50 Hz
Coolant system:
- Coolant pump capacity: 125 W
Standards and certifications:
- Standard: DIN EN 55011
Tailstock:
- Taper: MK 5
- Quill stroke: 180 mm
- Quill diameter: 75 mm
- Max. tool post mounting height: 25 mm
- Spindle taper: Ø 113 mm (Taper 1:20)
Threading:
- Metric thread pitch: 0.1–14 mm/rev
- Number of metric threads: 47
- Imperial thread pitch: 112–2 TPI
- Number of imperial threads: 60
- Diametral pitch (DP): 4–112 DP
- Number of diametral pitches: 50
- Module thread pitch: 0.1–7 mm/rev
- Number of module threads: 34
Feed travels:
- Top slide travel: 130 mm
- Cross slide travel: 316 mm
- Carriage travel: 1710 mm
Feed rates:
- Longitudinal feed range: 0.031–1.7 mm/rev
- Number of longitudinal feeds: 42
- Cross feed range: 0.014–0.784 mm/rev
- Number of cross feeds: 42
Küçük ilan
Mudersbach
2.503 km
Merkez torna tezgahı
BernardoSolid 460 x 2000 Pro Vario
Çağrı
Koşul: yeni, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario
Technical Specifications
Center Distance: 2000 mm
Center Height: 230 mm
Swing Over Bed: 460 mm
Swing Over Gap: 690 mm
Swing Over Cross Slide: 274 mm
Bed Width: 300 mm
Spindle Bore: 80 mm
Spindle Mount: DIN 55029, D1-8
Speed Range: 25 – 250 / 250 – 1700 rpm
Longitudinal Feed Range (42): 0.055 – 3.065 mm/rev
Cross Feed Range (42): 0.025 – 1.386 mm/rev
Metric Threads (41): 0.1 – 14 mm
Imperial Threads (60): 2 – 112 TPI
Quill Diameter: 60 mm
Quill Stroke: 130 mm
Quill Taper: MT 4
Motor Power: 5.5 kW (7.5 HP)
Machine Dimensions (W x D x H): 3250 x 1080 x 1370 mm
Weight: approx. 2030 kg
Features
• Modern main spindle bearing with precision angular contact ball bearings
• Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load
• Infinitely variable speed control, with digital readout of set speed
• Hardened and ground gears and shafts, including in the feed gearbox
• Rapid traverse longitudinally and in cross direction as standard to reduce non-productive time
• Central, user-friendly operation for feeds and threading, equipped with lead and feed screws
• Large dimension, hardened and precision-ground gears
• Simple and precise speed and feed adjustment
• Monoblock cast machine bed is extremely torsion-resistant and vibration-dampening, ensuring high machining accuracy
Scope of Delivery
• 3-axis ES-12 V digital readout with LCD display
• 3-jaw chuck PS3-250 mm / D8
• Fixed steady rest – max. capacity 150 mm diameter
• Follow rest – max. capacity 110 mm diameter
• Initial fill with Shell Tellus 46
• Face plate 450 mm
Pgodpfsxl Tcmsx Anxjk
• Quick-change tool post with 4 holders
• Safety guard for quick-change tool post
• Foot pedal with brake function according to CE
• Coolant system
• Frequency inverter
• Slip clutch
• Rapid traverse longitudinally and cross
• Change gears
• Reducing sleeve
• 2 dead centers
• Thread dial indicator
• LED machine lamp
• Chip guard
• Operating tools
Küçük ilan
Mudersbach
2.503 km
Merkez torna tezgahı
BernardoSmart 410 x 1500 Pro
Çağrı
Koşul: yeni, Bernardo Universal Lathe Smart 410 x 1500 Pro
Technical Specifications
Distance between centers: 1500 mm
Center height: 210 mm
Swing over bed: 420 mm
Swing over gap: 580 mm
Swing over cross slide: 255 mm
Bed width: 250 mm
Spindle bore: 52 mm
Spindle mount: DIN 55029, D1 – 6
Speed range (16): 45 – 1800 rpm
Longitudinal feed range (17): 0.05 – 1.7 mm/rev
Cross feed range (17): 0.025 – 0.85 mm/rev
Metric threads (42): 0.2 – 14 mm
Imperial threads (45): 2 – 72 TPI
Quill diameter: 50 mm
Quill travel: 140 mm
Quill taper: MT 4
Motor power: 3.0 / 4.5 kW
Machine dimensions (W x D x H): 2570 x 900 x 1600 mm
Weight approx.: 1400 kg
Product Features
• Prism bed made of cast iron, induction hardened and precision ground
• Electromechanical foot brake for reduced setup times
• Central, user-friendly controls for feeds and threads with leadscrew and feed rod
• Modern precision taper roller bearings for main spindle
• Oversized, hardened and precision-ground gears
• Hardened and ground gears and shafts, also in the feed gearbox
• Simple, smooth and precise speed and feed adjustments
• Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm)
• Removable gap bridge for machining large diameter workpieces
Scope of Delivery
• 3-axis digital readout ES-12 V with LCD display
• 3-jaw chuck DK11-200 mm / D6
• Faceplate 350 mm
• Fixed steady rest – max. passage diameter 135 mm
• Follow rest – max. passage diameter 65 mm
• Coolant system
• Four-way toolpost
• Safety device for four-way toolpost
• Micrometer longitudinal stop
• Slip clutch
• Indexing stop with fine adjustment
• Thread dial indicator
• Motor with magnetic brake according to CE standards
• Foot pedal with brake function according to CE
• Initial fill with Shell Tellus 46
• LED machine lamp
• Change gears
• Reducing sleeve
• 2 center points
Podpfx Aexl Dwusnxegk
• Chip guard/rear splash guard
• Operating tools
Küçük ilan
Mudersbach
2.503 km
Merkez torna tezgahı
BernardoSolid 460 x 2000 Pro
Çağrı
Koşul: yeni, Bernardo Universal Lathe Solid 460 x 2000 Pro
Technical Specifications
• Distance between centers: 2000 mm
• Center height: 230 mm
• Swing over bed: 460 mm
• Swing over gap: 690 mm
• Swing over cross slide: 270 mm
• Bed width: 300 mm
• Spindle bore: 80 mm
• Spindle mount: DIN 55029, D1-8
• Speed range (12 steps): 25 – 1700 rpm
• Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev
• Cross feed range (42 steps): 0.025 – 1.386 mm/rev
• Metric threads (41): 0.1 – 14 mm
• Imperial threads (60): 2 – 112 TPI
• Quill diameter: 60 mm
• Quill travel: 130 mm
• Quill taper: MT 4
• Motor power: 5.5 kW (7.5 HP)
• Machine dimensions (L x W x H): 3250 x 1080 x 1600 mm
• Weight approx.: 1995 kg
Features
• Modern headstock with high-precision angular contact ball bearings
• Hardened and precision-ground gears and shafts, including in the feed gearbox
• Central, ergonomic controls for feeds and threads using leadscrew and feed rod
• Large-dimensioned, hardened, and precision-ground gears
• Simple, smooth, and precise speed and feed adjustment
• Rapid traverse in longitudinal and cross direction as standard for reduced idle times
• One-piece, heavily ribbed machine bed ensures high rigidity and minimal vibration, fulfilling the essential requirements for precise turning
Scope of Delivery
• 3-axis digital readout ES-12 V with LCD display
• 250 mm / D8 3-jaw chuck
• 450 mm face plate
• Coolant system
• Initial fill with Shell Tellus 46
• Fixed steady rest – max. 150 mm passage diameter
Pedpexl Dzajfx Anxogk
• Travelling steady rest – max. 110 mm passage diameter
• Quick-change toolpost with 4 holders
• Safety guard for quick-change toolpost
• Motor with CE-compliant magnetic brake
• Foot pedal with CE-compliant braking function
• Slip clutch
• Rapid traverse longitudinal and cross
• Change gears
• 2 centers
• Reducing sleeve
• Thread dial indicator
• LED machine lamp
• Chip guard
• Service tools
Küçük ilan
Mudersbach
2.503 km
Merkez torna tezgahı
BernardoSmart 410 x 1500 Pro Vario
Çağrı
Koşul: yeni, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario
Technical Specifications
- Distance between centers: 1500 mm
- Center height: 210 mm
- Swing over bed: 420 mm
- Swing over gap: 580 mm
- Swing over cross slide: 255 mm
- Bed width: 250 mm
- Spindle bore: 52 mm
- Spindle mount: DIN 55029, D1 – 6
- Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm
- Longitudinal feed range (17): 0.05 – 1.7 mm/rev
- Cross feed range (17): 0.025 – 0.85 mm/rev
- Metric threads (42): 0.2 – 14 mm
- Inch threads (45): 2 – 72 TPI
- Tailstock quill diameter: 50 mm
- Tailstock quill travel: 140 mm
- Tailstock taper: MT 4
- Motor power: 5.5 kW (7.5 HP)
- Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm
- Weight approx.: 1325 kg
Features
• Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load
• Infinitely variable speed control, with digital display for set speed
• Prism bed made of cast iron, induction-hardened and precision-ground
• Central, user-friendly feed and thread control with leadscrew and feed rod
• Modern main spindle bearings with precision angular contact ball bearings
• Standard with frequency inverter and 3-axis digital readout
Pedpfx Aexl Ta Sonxjgk
• Hardened and ground gears and shafts, including in the feed gearbox
• Simple, smooth, and precise speed and feed adjustment
• Movable tailstock for taper turning, handwheel with adjustable fine graduation (0.02 mm)
• Removable gap bridge allows machining of large-diameter workpieces
Scope of Delivery
• 3-axis digital readout ES-12 V with LCD display
• 3-jaw steel chuck PO3-200 mm / D6
• Face plate 350 mm
• Fixed steady rest – max. passage diameter 135 mm
• Traveling steady rest – max. passage diameter 65 mm
• Foot pedal with brake function according to CE
• Four-way tool post
• Safety device for four-way tool post
• Micrometer longitudinal stop
• Adjustable turret stop
• Frequency inverter
• Initial fill with Shell Tellus 46
• Coolant system
• Slip clutch
• Thread dial indicator
• LED machine lamp
• Change gears
• Reducing sleeve
• 2 center points
• Chip guard (rear)
• Operating tools
Küçük ilan
Mudersbach
2.503 km
Merkez torna tezgahı
BernardoTitan 660 x 3000
Çağrı
Koşul: yeni, Bernardo Universal Lathe Titan 660 x 3000
Technical Specifications
Center Distance: 3000 mm
Center Height: 330 mm
Swing Over Bed: 660 mm
Swing Over Gap: 900 mm
Swing Over Cross Slide: 460 mm
Bed Width: 400 mm
Spindle Bore: 105 mm
Spindle Mount: DIN 55029, D1-8
Spindle Speed Range: (16 steps) 25 - 1600 rpm
Longitudinal Feed Range: (25 steps) 0.044 - 1.48 mm/rev
Cross Feed Range: (25 steps) 0.022 - 0.740 mm/rev
Metric Threads: (54) 0.45 - 120 mm
Imperial Threads: (54) 7/16 - 80 TPI
Quill Diameter: 90 mm
Quill Travel: 235 mm
Quill Taper: MT 5
Motor Power: 7.5 kW (10.0 HP)
Machine Dimensions (L x W x H): 4630 x 1200 x 1520 mm
Approx. Weight: 3300 kg
Features
• Versatile applications in general engineering, production, single-part manufacturing, etc.
• Central, ergonomic controls for feeds and threads with leadscrew and feed rod
• Prism bed made from cast iron, induction-hardened and precision ground
• Modern main spindle bearings with precision angular contact bearings
• Hardened and ground gears and shafts, including in the feed gearbox
• Rapid traverse for longitudinal and cross travel as standard to reduce non-productive times
• Large spindle bore (105 mm) for workpieces with large diameters
• Smooth start via mechanical multi-plate clutch
Pgedoxxayfjpfx Anxok
• Electromechanical foot brake to reduce non-productive times
• Optimum cutting performance even for facing operations
• The bed is reinforced with strong ribs to stiffen the guideways and minimize vibration influences
Scope of Delivery
• 3-axis digital display ES-12 V with LCD screen
• Slip clutch
• Rapid traverse for longitudinal and cross axes
• LED machine lamp
• 3-jaw steel chuck PO3-315 mm / D8
• Face plate 450 mm
• Fixed steady rest – max. opening diameter 180 mm
• Travelling steady rest – max. opening diameter 120 mm
• 2 dead centers
• Motor with magnetic brake compliant with CE standards
• Foot pedal with brake function compliant with CE
• Initial fill with Shell Tellus 46
• Coolant system
• Quick-change tool post with 4 holders
• Safety guard for quick-change tool post
• Change gears
• Reducing sleeve
• Chip guard / rear splash guard
• Cable management via energy chain
• Operating tools
Küçük ilan
Novazzano
2.277 km
Tezgah torna (merkez torna)
OPTITURNTH 4010V
Çağrı
Koşul: ikinci el, Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, OPTIturn TH 4010D Lathe
Precision, gear-driven lathe with digital position indicator; center height/distance 205 mm / 1000 mm; motor power 2.4 kW, 400 V; spindle speed 45–1800 rpm; spindle bore Ø 52 mm; spindle foot brake; with automatic longitudinal and cross feed; CAMLOCK chuck mount; versatile workshop machine. Includes machine base with chip drawer, LED work light, coolant system, etc.
Fully equipped mechanics’ lathe.
Hardened and ground bed guideways
Spindle mount Camlock DIN ISO 702-2 No. 5
Guaranteed spindle nose run-out accuracy better than 0.015 mm
Hardened and ground gears and shafts, running in precision bearings in oil bath
Motor protection switch
DC 24 volt electrics
Lockable main switch
Bed-mounted carriage reversible for forward/reverse
Removable chip tray with guide rails
Safety handwheels with disengagement on X- and Z-axis
Emergency stop with foot pedal
Machine base with tool compartment on the right side
Digital Position Indicator DPA 21
User-friendly membrane keypad, splashproof, sealed, and glare-free display
Increased working accuracy
Podpfxeykngro Anxogk
Reduced error rate due to clear layout
X, Y/Z0, Z-axis each with 8-digit displays
Supplied sensor for spindle speed measurement
Glass scales on all three axes
Supply voltage: 400 V
Motor output: 2.4 kW
Fuse protection: 16 A
Spindle taper: MK 6
Spindle mount: Camlock No. 5
Spindle bore: 52 mm
Center height: 205 mm
Center distance: 1000 mm
Swing over bed: Ø 410 mm
Swing over cross slide: Ø 270 mm
Swing without bed bridge: Ø 540 mm
Turning length in bed bridge: 165 mm
Bed width: 206 mm
Spindle speed: 45 – 1800 rpm
Number of gear stages: 16
Top slide travel: 100 mm
Cross slide travel: 195 mm
Longitudinal feed: 0.043 – 0.653 mm/rev
Number of longitudinal feeds: 48
Cross feed: 0.015 – 0.206 mm/rev
Number of cross feeds: 48
Metric thread pitches: 0.4 – 7 mm/rev
Number of metric thread pitches: 42
Imperial thread pitches: 70 – 4 TPI
Number of imperial thread pitches: 42
Max. tool shank height: 16 x 16 mm
Tailstock taper: MK 3
Tailstock quill stroke: 130 mm
Quill diameter: Ø 45 mm
Dimensions (L x W x H): 1920 x 740 x 1555 mm
Weight: 750 kg
Küçük ilan
Bruchsal
2.400 km
Kılavuz/çekme milli torna tezgahı/DREHMA
DREHMAD 410x1500
Çağrı
Koşul: yeni gibi (sergi parçası), Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, Lead and feed screw lathe DREHMA DA 410x1500 / New / Demo machine
- CE marking
- Digital readout
- Swing over bed: 410mm
- Swing over cross-slide: 225mm
- Swing in gap: 580mm
- Turning length: 1500mm
- Spindle bore: 52mm
- Speed range / gearbox: 45 - 1800 RPM
- Automatic longitudinal / cross feeds
- Thread cutting: Metric / Inch etc.
- Tailstock: MT4
- Central lubrication
- Drive power: 3.5 kW
- Fixed & travelling steadies
- Multifix toolpost with inserts
- 3-jaw chuck: 200mm
- 4-jaw chuck: 250mm
- Faceplate
- Chuck guard
- Coolant system
- Work light
- Live center & drill chuck
- Machine feet
Pedpjymcv Hsfx Anxogk
- Documentation
Dimensions LxWxH: 1.5 x 1 x 1.6 meters / Weight: 1850kg
Errors and omissions excepted.
Küçük ilan
Ubstadt-Weiher
2.396 km
Hassas torna tezgahı
Schaublin102N-VM
Çağrı
Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Yüksek Hassasiyetli Kılavuz Mili Torna Tezgahı Schaublin 102N-VM
Teknik Özellikler:
>> Makine No: 283152
>> Punta Yüksekliği: 102 mm
>> Punta Mesafesi: 450 mm
>> İş Mili Delik Çapı: 25 mm
>> Boyuna İlerleme: 8 adet, 0,02-0,3 mm/dev arasında
>> Metrik Vida: 0,25 ila 4 mm adım aralığında, 20 farklı adım
>> İngiliz Vida: 80 ila 6 diş/inç aralığında, 25 farklı adım
>> Karşı Punta: MK2
>> Devir Sayısı: 270-3000 dev/dak, kademesiz ayarlanabilir
Psdpfjwvq Tmex Anxegk
>> Ağırlık: yaklaşık 700 kg
Aksesuarlar:
>> 3 Ayaklı Aynası, 2 set çene
>> 6 Adet Takım Tutucu Kovan
>> Hızlı Sıkma Aparatı, çekme borusu ve 34 adet pens
>> Soğutma sistemi
>> Takımlar, matkap aynası (resimlerde görüldüğü gibi)
>> Yedek parça listeli kullanım kılavuzu
Makine Hakkında:
Satışa sunulan bu Schaublin 102VM kılavuz milli torna tezgahı, çok iyi durumdadır. Makine tamamen çalışır durumdadır. Arabalar (kızaklar) çok akıcı ve düzgün hareket eder. Yüksek devirlerde de 102VM sessiz çalışır. Vida açma için gerekli dişli seti mevcut fakat muhtemelen tam değildir. Makineyi yerinde, elektrik altında inceleme ve durumuna bizzat göz atma imkanınız bulunmaktadır.
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Ubstadt-Weiher
2.396 km
Merkez torna tezgahı
WeilerCondor 81 Geometrisch Überholt
Çağrı
Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Weiler Center Torna Tezgahı Model Condor 81, Kurşun ve Besleme Mili ve 3 Eksenli Dijital Okuma K&C NEW'den
Yeni makine toleransları için kabul sertifikasıyla geometrik olarak elden geçirildi
Teknik Özellikler:
Pgjdpjwrm Dtofx Anxjk
>> Makine No. 84-121
>> Merkez yüksekliği 165 mm
>> Merkez genişliği 750 mm
>> Mil hızları: 22 ila 2800 rpm
>> Mil deliği 40 mm
>> Kısa konik mil kafası DIN 55027 boyut 5, süngü kilidiyle
>> Kuyruk mili MT 3
>> 0,015 ila 0,46 mm/dev besleme oranları
>> Olası dişler: metrik, inç, modül ve çapsal adım
>> Metrik diş adımları 0,18 ila 28 mm
>> Yaklaşık ağırlık 1100 kg
>> Mil freni değiştirilebilir
>> Uzunluk 1,83 m, yükseklik 1,29 m, derinlik 0,88 m
Aksesuarlar ve Ekipman:
>> K&C'den 3 eksenli dijital okuma, yeni, kullanım talimatlarıyla 12 aylık üretici garantisi
Fonksiyonlar: mm/inç değiştirme, ABS/INC koordinat seçimi, görüntülenen değerin yarıya indirilmesi, referans işareti, 200 parçalı takım programlama, koni hesaplama, yarıçap/çap, hızlı sıfırlama, sayma yönü değiştirme
>> Pens cihazı YENİ, pensler YENİ 3 ila 26 mm arasında 1 mm'lik artışlarla
>> 2 takım çeneli 160 mm üç çeneli ayna YENİ
>> 3 takım tutuculu Multifix B boyutu YENİ
>> Yatak durdurucu
>> Elektrikli Mandren koruması YENİ
>> Arka panel
>> Kullanım talimatları
>> Soğutma sistemi
>> Makine ayakları
Makine hakkında:
Sunulan Weiler Condor 81 kılavuz ve besleme mili torna tezgahı geometrik olarak çok iyi elden geçirilmiş durumdadır. Kılavuzlar yeniden taşlanmış veya yeniden kazınmıştır. Test raporuna göre kabul edilmiştir.
Aksesuarlar, pensler ve ayna yenidir.
Güvenlik için: Makine bir fren motoru, elektronik mil koruyucusu ve iki acil durdurma ile donatılmıştır. Bu torna tezgahı kesinlikle mükemmel durumdadır. Weiler yüksek hızlarda bile çok düzgün çalışır. Bu yeni nesil Weiler torna tezgahları çok kullanıcı dostudur ve yüzeyler taşlanmış gibi üretilebilir. Bu makineyi güç altında yerinde görme ve durumunu kendiniz görme fırsatından yararlanın.
Küçük ilan
Hessisch Lichtenau
2.407 km
Merkez torna tezgahı
HarrisonV350
Çağrı
Koşul: ikinci el, Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, Donanım: devir hızı sonsuz değişken, Manufacturer: 600 Lathes
Model: Harrison V350
Centre Height: 170 mm
Swing over Bed: 350 mm
Swing over Cross Slide: 196 mm
Swing in Gap: 535 mm
Width in front of Faceplate: 165 mm
Distance between Centres: 650 mm
Spindle Speeds (stepless via potentiometer in 3 speed ranges with digital display):
15 - 340 rpm
Podpfjxcuulsx Anxjgk
45 - 1010 rpm
150 - 3250 rpm
Spindle Mount (Camlock): D1-4
Spindle Bore: 54 mm
Spindle Motor: 7.5 kW
Cross Slide Guideway Width: 318 mm
Cross Slide Travel: 250 mm
Top Slide Travel: 140 mm
Tailstock Quill Travel: 140 mm
Taper in Tailstock Quill: MT4
Quill Diameter: 63 mm
Metric version machine
Threads:
Metric: 0.2 - 14 mm (51)
Inch TPI: 2 - 56 (56)
Module: 0.2 - 3.5 (20)
Diametral: 8 - 56 (20)
Drive Power: 7.5 kW
Equipment:
3-axis digital readout
3-jaw Röhm chuck D:200 mm
4-jaw chuck D:160 mm
Collet chuck
Steady rest
4-way quick-change toolpost
Rotating centre
Chuck guard
Additional chip guard on carriage
Coolant system
Rear splash guard
Machine documentation including wiring diagram
Dimensions:
Floor to spindle centre: 1050 mm
Overall length: 1900 mm
Overall width: 1100 mm
Height: 1300 mm
Weight: 1350 kg
The machine can be demonstrated under power on site.
All information without guarantee
Errors and prior sale excepted.
Küçük ilan
Almanya
2.483 km
Tezgah torna (merkez torna)
WeilerPrimus VC
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 2000, Weiler Primus VC, 2000 üretim yılı, dijital ekran, punta arası mesafe 500 mm, kızak üzerinden maksimum tornalama çapı 150 mm, mil devri dakikada 4.000'e kadar, mil delik çapı 40 mm, mil tahrik gücü 1,5 kW, Multifix takım tutucu, 24 boyuna ilerleme kademesi, metrik diş, inç diş.
Pjdpfx Aeyh Hkhonxsgk
Küçük ilan
Ubstadt-Weiher
2.396 km
Merkez torna tezgahı
WeilerPraktikant 160 B
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, sourced from a vocational school
Technical Data:
Psdpox Eb A Ujfx Anxsgk
>> Year of manufacture: 1992 / Machine No.: 92 160 3260
>> Centre height: 160 mm
>> Centre distance: 650 mm
>> Spindle speeds: from 24 to 2,500 rpm
>> Spindle bore: 40 mm
>> Short taper spindle nose to DIN 55027, Size 5 with bayonet lock
>> Tailstock: Morse taper 3
>> Feeds: from 0.02 to 0.63 mm/rev
>> Threads: Metric, Imperial, Module, and Diametral Pitch possible
>> Metric thread pitches: from 0.25 to 8 mm
>> Weight: approx. 680 kg
>> Spindle brake switchable
>> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m
Accessories and Equipment:
>> 3-axis digital readout by K&C with operating manual
Functions: Switch mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zero, count direction switch
>> Collet chuck system with new collets from 3 to 26 mm in 1 mm steps
>> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws
>> Quick-change toolpost with 4 tool holders
>> Bed stop
>> Electronic spindle guard
>> Rear panel
>> Coolant system
>> Operating manual, spare parts diagram
About the machine:
Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, built in toolmaker's precision in 1992, and in very good condition. The machine is, of course, fully functional. All carriages operate very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view the machine under power on site and convince yourself of its condition.
Sizin için aramayı kolaylaştırıyoruz: "imperial smd016"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay


































































































































































































































