Kullanılmış Marel Stork Townsend. İkiz Spiral Sıcak Hava Fırını satın al (12.256)

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Pedpfx Abjvz Hqyonjpt Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa Podpfx Aevz Hqtsbnopt - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. Pjdsvz Hqmepfx Abnspt The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V Ppsdpevz Hqgefx Abnjt - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm Psdpfx Aovz Hhxebnopt - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Üretim yılı: 2026, Koşul: yeni, Çelik ısıtma ve/veya ot kurutma ile ot kurutma tesisatları ve kurutma kabinleri konteyner içinde montajlı, tak & çalıştır (doğrudan kullanılabilir, ayrıca kiralanabilir) konteynere veya müşterinin sahasında, İsviçre, Avusturya veya Güney Almanya’da kurulum. Psdpfxekytn He Abnept 80 kW’dan 500 kW’a kadar ve talep üzerine >500 kW güç seçenekleri. Sıcak hava ısıtıcıları stokta – yeni ve kullanılmış! 200 kW pelet ısıtıcı, 19.000 m3/saat – avantajlı fiyatları öğrenin! * Kullanılmış! Stokta: 1 adet 200 kW konteyner tipi, 3 tonluk stok tankı ile * Yeni! Stokta: 2 adet 200 kW pelet brülörlü Lanox.eu Hollanda

Koşul: ikinci el, Sıcak hava fırını, sirkülasyon fırını, ısı kabini, tavlama fırını Maksimum iç ortam sıcaklığı: 240°C İç boyutlar (G x D x Y): 485 x 485 x 300 mm Şebeke bağlantısı: 220 Volt, 50 Hz - Hava geçirmez kapı kilidi - +0,6 bar ile -1 bar arasında vana ve basınç manometresi ile aşırı veya düşük basınç bağlantısı - Isıtma bölmesi için hava alma veya çıkış valfi Ppjdpfx Abexciugjnet - İç ortam 240°C'ye kadar ısıtılır, sıcaklık kontrolü yoktur. Ölçüler (U x G x Y): 790 x 670 x 520 mm Ağırlık: yaklaşık 60 kg İyi durumda

Koşul: ikinci el, Thermal Oven Climate Cabinet KÖTTERMANN Type 2306 Serial No. 783018 Year of manufacture approx. 1980 Internal dimensions (W x H x D): 500 x 530 x 620 mm Connected load: 4 kW Power supply: 380 Volt, 50 Hz, 18.2 Amp. - Circulation fan Ppjdpfx Abjxf Uxpjnjt - Analog temperature controller for heating - Analog temperature controller for cooling - Built-in refrigeration unit - Interior lined with stainless steel No functional test performed Control panel outdated Net weight approx. 250 kg

Koşul: mükemmel (kullanılmış), GEA FlowCook 8000/600. 8 metre pişirme uzunluğu, 600 mm genişlik. Mükemmel durumda, çok az kullanılmıştır. Elektrikli ısıtmalı. 283 KW. Pedpfxjx Ili Hs Abnjpt

Koşul: yeni, ısıtma çıkışı 30 kW Boyutlar (uzunluk/genişlik/yükseklik) 105 cm x 60 cm x 147 cm cm - YENİ - Kanuk Turbo 2 *yeni görünüm* sıcak hava fırını ısı değiştirici ve sıcak hava üfleyici dahil nominal ısı çıkışı 30 kW Boyutlar 105 cm x 60 cm x 147 cm ısıtılmış oda hacmi 1000 m³ kütük uzunluğu 80 cm verimlilik %82,4 duman borusu bağlantısı 150 mm Pjdpfx Ajvxa Itsbnopt Sanat No. 2100006

Koşul: yeni, - YENİ - Ppsdjvwf Rkopfx Abnet Kanuk® Orijinal sıcak hava fırını Nominal ısı çıkışı: 15,4 kW Boyutlar: 80 x 58 x 95 cm ısıtılmış oda hacmi: 450 m³ Verimlilik: %83,4 kütük uzunluğu: 48 cm duman borusu bağlantısı: 160 mm Toplam güç (kW):15.4 Boyutlar Y x G x D (cm): 80 / 58 / 95 Oda ısıtma kapasitesi (m³): 450 Baca borusu bağlantısı (mm): 160 Duman borusu bağlantısı: üst / arkaGörüntüleme penceresi (cm): 28 x 15 Verimlilik (%): 83.3 Ağırlık (kg):148 Egzoz sıcaklığı (°C): 216 kütük uzunluğu (cm): 48 Odun tüketimi (kg/saat):3.9 Egzoz gazı kütle akışı (g/s): 14.28 Minimum baca çekişi (Pa): 16 Egzoz gaz kelebeği valfi:Hayır Yanma odası Y x G x D (cm): 40 x 44 x 49,5 Kül kutusu:Hayır Tip 1 (kendiliğinden kapanan kapı): İsteğe bağlı Cam yıkama: Evet BimSchV Seviye 2: Evet Kütükler, odun briketleri: Evet DIN EN numarası: 13240 Linyit briketleri:HayırAT §15a B-VG Normu:Evet Birincil, ikincil, üçüncül hava: Evet CE işareti:Evet Dış hava bağlantısı (mm): 100LRV İsviçre: Evet Hayır. 2100102

Koşul: ikinci el, Üretim yılı: 2009, toplam uzunluk: 1.500 mm, toplam genişlik: 1.500 mm, toplam yükseklik: 2.800 mm, toplam ağırlık: 800 kg, giriş voltajı: 400 V, Oferujemy urządzenie FIM RotoVac do końcowej inspekcji tusz drobiowych, przeznaczone do wysoko wydajnych linii ubojowych. Maszyna zapewnia skuteczne usuwanie pozostałości poubojowych, podnosząc jakość produktu końcowego i spełniając rygorystyczne standardy higieniczne branży spożywczej. Dane techniczne: Wydajność: do 13 500 szt./h Liczba stanowisk roboczych: 16 System pracy: karuzelowy (obrotowy) Medium robocze: podciśnienie (vacuum) Zasilanie: 400 V / 50 Hz Materiał: stal nierdzewna spożywcza Integracja: linie patroszenia drobiu Kluczowe zalety: - Bardzo skuteczne usuwanie pozostałości - Obrotowy system dysz z podciśnieniem (RotoVac) - Stabilna i wytrzymała konstrukcja przemysłowa - Automatyczne czyszczenie dysz po każdym cyklu - Regulowana wysokość i ustawienia dla różnych rozmiarów tusz - Integracja z istniejącymi liniami produkcyjnymi MAREL / STORK / EWICTION / DRÓB / FIM / ROTOVAC Ppjdpfey Nb A Eox Abnjt

Koşul: ikinci el, Satışa, MAREL/STORK tavuk kesim ve bağırsak çıkarma hatları için gerdiriciler dahildir. Her bir gerdiricinin fiyatı 2.000 € net EXW'dir (adet başı). Gerdiriciler aşağıda açıklandığı şekilde numaralandırılmıştır: 1. Boyutlar: 1850 x 580 x 250 [mm] Tekerlek: Diş üstünden 480 mm Diş altından 410 mm Ppedoy Na A Dopfx Abnjt 2. Boyutlar: 1900 x 580 x 200 [mm] 3. Boyutlar: 1900 x 580 x 200 [mm] Tekerlek: 465 mm çap Kapağı ile 485 mm çap Diş altından 425 mm 4. Boyutlar: 1970 x 575 x 210 [mm] 5. Boyutlar: 1800 x 380 x 280 [mm] Tekerlek: 210 mm çap (diş altı) Kapağı ile 290 mm çap TAVUK / KANATLI / GERDİRİCİ / HAT

Koşul: ikinci el, tamamen paslanmaz çelik Psdjy Rytlepfx Abnopt elektrikle ısıtılan 386,40 kW alt ve üst bant kavurma uzunluğu 8.000 mm ray genişliği 630 mm kademesiz hız yağ pompası yangın korumasına uygun toprak taşımacılığı elektrikli kaldırma cihazı Genel boyutlar (U x G x Y): ± 11.550 x 1.700 x 2.900 mm

Koşul: mükemmel (kullanılmış), Üretim yılı: 2011, Stork'un Otomatik transfer sistemi TREC NT'yi Satışa sunmaktan mutluluk duyuyoruz. Üretici: Leylek Tür: TREC NT Yıl: 2011 Iasbor Igpgstt Shdfor Kapasite: 13500 bph Durum: Kullanılmış/Çok iyi Pedpswdibxefx Abnjpt

Koşul: iyi (kullanılmış), Üretim yılı: 2011, Stork'un VC-16 RS havalandırma kesicisini satışa sunmaktan mutluluk duyuyoruz. Marka Pjdpfx Abjr Igq Tjnspt Leylek Model VC-16 RS Yıl 2011

Koşul: mükemmel (kullanılmış), Üretim yılı: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision We are offering a complete Marel / Stork AMF-i filleting line tailored for modern poultry processing facilities. This system delivers fully automatic, precise filleting of chicken breasts while securing maximum throughput and superior end-product quality. Key Features: Intelligent Filleting (Adaptive Filleting) The line automatically adapts its settings to accommodate varying raw product sizes, ensuring superior quality and yield regardless of the piece dimensions. High Production Throughput Podpfx Aox Hymdobnspt Up to approx. 60 fillets/minute – an optimal solution for high-volume operations. Consistent Quality and Maximum Yield Minimizes product loss while optimizing by-product recovery (tendons, skin, meat). Modular System Design The line’s modular structure allows for configuration and future expansion based on processing requirements. Process Automation Reduces manual labor and boosts repeatability across production batches. Included Modules: -loader module -filleting line with integrated measurement system (encoder) -skinning module -automatic splitting module with self-adjustment -separation module tendon extraction system -original control cabinet Technical Specifications: Model: AMF-i Manufacturer: Stork / Marel Year of manufacture: 2018 Capacity: up to 3,600 fillets/hour Condition: very good / ready to operate Type: Chicken breast filleting line STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST

Koşul: ikinci el, Model: TVF630/4000TH Yıl: 2011 Durum: Kullanılmış Seri numarası: 10092893 Stok numarası: 3311 Ppsdpfx Absyynkksnst Bant genişliği: 630 mm Teflon besleme, baskı bandı, çamur tahliyesi, elektrikli vinçler, sirkülasyon pompası, yağ seviye göstergesi, CIP Kızartma uzunluğu: 4000 mm Isıtma: Termal yağ, 232 kW Yağ kapasitesi: +/- 1100 litre, bantın üstünde 20 mm Basınçlı hava: 6 - 8 bar, 0,5 Nm³/h Güç: 3 x 400 V, 50 Hz, 10,5 kW Boyutlar: 6850 x 2100 x 2800 mm Ağırlık: 4200 kg

Koşul: ikinci el, Model: Peeler BL 2800 Yıl: 2015 İkinci el Seri numarası: 10145585 Stok numarası: 3261 Kapasite: 225 m/dak Blower 2800 Çap: 13 - 41 mm Marel Townsend blower ünitesi Seri numarası: 10394495 Marel Townsend blower ünitesi Yıl: 2017 Buhar: 1,7 - 3,4 bar, 78 kg/saat Basınçlı hava: 7 bar Russo SKV-NS-420-3-826 3 x 400 V, 50 Hz, 3 kW Güç: 3 x 380 V, 50 Hz, 3,8 kW Pjdpoyyncajfx Abnspt Boyutlar: 900 x 600 x 1600 mm Marel Townsend blower ünitesi Boyutlar: 1400 x 700 x 1200 mm Marel Townsend blower ünitesi Ağırlık: 180 kg Ağırlık: 340 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2008, Merhaba, makine çok iyi durumda. TM-SERVICE, kümes hayvanı makinelerinin servisi ve satışı konusunda uzmanlaşmış bir şirkettir. Ekipmanı her yere kuruyor, sattığımız makinelerin kapsamlı bir şekilde denetlenmesini ve verimli çalışmaya hazır olmasını sağlıyoruz. Podpfon Nykwsx Abnjpt

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, The Marel Townsend TFM 630 Flour Duster is an industrial machine specifically designed for the homogeneous dusting of food products before cooking or further processing. It is used in-line to apply an even layer of flour or pre-dust, especially in meat, poultry, or value-added product production. This process ensures uniform preparation, which is essential for final quality and batch consistency. Thanks to its continuous conveyor system, the TFM 630 ensures precise distribution of flour on every product. The standardized belt width allows smooth passage of items, improving coating uniformity. As a result, the machine minimizes material waste while optimizing overall throughput. Additionally, it stabilizes production by limiting batch-to-batch variations. The flour duster can be easily integrated into a complete food processing line, typically positioned between ingredient preparation and the cooking or frying process. Its stainless steel construction ensures a high level of hygiene and makes cleaning operations easy. Meanwhile, its continuous operation allows for increased throughput without compromising product quality. Ultimately, the Marel Townsend TFM 630 Flour Duster is a strategic solution for processors seeking to automate coating while controlling costs. As a reconditioned machine, it offers an excellent compromise between performance, reliability, and profitability. Technical Specifications: Brand: Marel Townsend Model: TFM 630 Type: Industrial flour duster (coating) Belt width: 630 mm Power supply: 3 × 400 V Frequency: 50 Hz Construction: Stainless steel System: Continuous conveyor with uniform coating Integration: Automatic line (pre-cooking or frying) Function: Flour dusting / pre-coating ❓ Points to check before investing in the TFM 630 What is the actual production capacity? It depends on the complete line, but the 630 mm width allows continuous, industrial-speed processing. Why choose an automatic duster over manual breading? It ensures perfect consistency, reduces losses, and stabilizes production. Is this machine compatible with an existing line? Yes, it is generally integrated between product preparation and cooking (fryer or oven). What type of products can it handle? Meats, poultry, formed products, or preparations requiring an even coating. Podpfxjy Na Dhs Abnept U4C1ML8C

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 4,3 kW (5,85 bg), vites türü: diğer, yakıt türü: benzin, renk: kırmızı, boş ağırlık: 150 kg, dingil konfigürasyonu: 1 dingil, emisyon sınıfı: hiçbiri, direk tipi: diğer, frenler: diğer, Üretim yılı: 2026, Donanım: düşük ses seviyesi, TICAB Heat Air Lance HL-1 | Professionelles Asphalt-Heißluftlanze – Straßenreparatur, Rissverschluss & Flächenvorbereitung Die TICAB Heat Air Lance HL-1 ist eine leistungsstarke, gasbetriebene Heißluftlanze, entwickelt zur Asphaltflächenvorbereitung, Rissreinigung, Vorwärmen von Fugen, Unkrautbeseitigung, Asphalterweichung und Bitumenerwärmung. Pedpox U Ayvefx Abnspt Ein unverzichtbares Werkzeug für Straßenbauunternehmen, Pflasterkolonnen, Kommunen, Versorgungsunternehmen und Fachkräfte im Bereich Flächenunterhalt, die effiziente Wärmeanwendungen und verbesserte Haftungsergebnisse anstreben. Hauptmerkmale • Heißluftlanze / Asphalt-Heißluftwerkzeug für das Erwärmen von Asphalt, Rissvorbereitung und Oberflächenerweichung • Hochtemperatur-Flammenausstoß für gleichmäßiges Erhitzen von Asphalt, Bitumen und Fugen • Gasbetriebener Aufbau für mobile, flexible Einsätze auf der Baustelle • Ideal zum Vorwärmen vor Reparaturen, Lösen von Altasphalt, Trocknen von Flächen und Schmelzen von Bitumen • Kompakt, leicht und einfach zu handhaben – ideal für präzise Arbeit in engen Bereichen • Robuste Konstruktion für den professionellen Dauereinsatz im Straßenunterhalt Einsatzbereiche • Asphaltflächenvorbereitung vor Risssanierung oder Ausbesserung • Vorwärmen von Asphaltfugen und Kanten für verbesserte Haftung des Dichtstoffs • Unkrautbeseitigung und Oberflächenreinigung vor Wartungsarbeiten • Erweichen von Altasphalt, Erwärmen von Bitumen und Materialkonditionierung • Einsatz auf kommunalen Straßen, Bundesstraßen, Parkplätzen, Zufahrten, Gehwegen, Radwegen und Industrieflächen Warum TICAB HL-1 wählen Das Gerät wurde entwickelt, um die Haftung des Dichtmaterials zu optimieren, Reparaturabläufe zu beschleunigen und die Gesamtqualität der Straßenunterhaltungsarbeiten zu verbessern – damit ist es die erste Wahl für Unternehmen und Bauhöfe, die auf effiziente, professionelle Straßenreparaturen setzen. Die TICAB Heat Air Lance HL-1 kombiniert starke Heizleistung, Mobilität und Präzision für optimale Asphaltvorbereitung und Rissverschluss-Ergebnisse. Kontaktieren Sie uns jetzt für Preise, Lieferoptionen und vollständige technische Daten. Optimieren Sie noch heute Ihre Asphaltvorbereitung und Reparaturprozesse!

Üretim yılı: 1997, Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: PP120/40, Sıcak Duvar Darbeli Plazma Nitrürleme Fırını (2 tabanla birlikte) Kontrol sistemi 2018 yılında yenilenmiştir Fırın Modeli: Plateg PP120/40 Yükleme Boyutları Çap: 1000 mm Podpfx Aowmfyvebnept Yükseklik: 1250 mm Maksimum Yük Ağırlığı: 1000 kg (brüt) Plazma Gücü: 40 kVA Isıtıcı Gücü: 3x13,5 kW, (3 bölge) Elektrik Bağlantısı: 400V 3 faz 50 Hz

Koşul: ikinci el, İz genişliği ± 600 mm Toplam elektrik gücü: 33 kW Termal bağlantı: NW32 2x5 katman Maks. ürün yüksekliği: ± 100 mm Pişirme süresi min/maks: 4-40 dk Pedpjy Ur A Tefx Abnjpt Maks. sıcaklık: 200°C Otomatik asansör Bant yıkama sistemi ile CIP temizliğine uygun Buhar enjeksiyonuna uygun (ısıtma, ürün verimi): 4-8 bar, bağlantı: NW 40 Sola dönüşlü

Koşul: ikinci el, K25 odunla çalışan sıcak hava jeneratörü Ppsdpfx Abey Ncarjnst Kal./s 250.000