Kullanılmış Ares Mg1200 satın al (166)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Janville
2.853 km
Döner vana
TBMA Europe BVH-AR 300
Ara
Durum: ikinci el, Üretim yılı: 2003, Üretici: TBMA
Model: H-AR 300
Yıl: 2003
Tip: Döner vana
Dış çap: 450mm
Nominal çap: 300 mm.
Ljdpfx Adox R Axqsljrn
Motor gücü: 0,75 KW
Küçük ilan
Triptis
2.248 km
Brandalı açık yarı römork
FLIEGL3-Achs Gardinensattel Mega Xtra-Long
Ara
Durum: ikinci el, makine/araç numarası: WFDFLT33902026418, boş ağırlık: 7.156 kg, azami yük ağırlığı: 27.844 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2019, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 14.980 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, toplam uzunluk: 15.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", renk: gri, The images shown are archive photos!
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, X-tra Long, with an interior length of 14,980 mm, slightly angled outer frame with "Load-Lock profile" for lashing strap attachment, 24 t, 2-speed landing gear, one-sided operation, with semi-circular lower part and straight mounting plate, with load compensation.
1 wheel chock with holder, side underrun protection in aluminium, underride guard in galvanized steel, quarter-circle mudguards in front of the 1st axle and behind each axle, "Heavy Blocker" rear transverse impact guard + "roller impact buffers" at the sides.
Pair of ferry lashing rings, marked yellow, heavy-duty pallet stops on both sides, approx. 15–20 mm high, lashing points every 200 mm, loading height reduced by approx. 15–20 mm, spare wheel holder for 1 spare wheel, including wheel fastening kit, spare wheel of the same brand and size as the main tires, steel rim, plastic toolbox, with drawer and shelf, dimensions: width = 650 mm / height = 520 mm / depth = 670 mm, lockable with a padlock.
Axles & Suspension
BPW disc brake axles, "Axles/chassis laser aligned" to reduce tire wear and fuel consumption, hub odometer / kilometer counter, air suspension, air bag diameter 360 mm, with a total travel of approx. 260 mm.
Brake System
2-line compressed air brake system, spring-actuated parking brake, 2 fail-safe coupling heads at the front, without connecting line, Knorr brand EBS electronic braking system, EBS socket at the front, without connecting cable.
Lrodpfx Asy Efzksdlon
Wheels and Tires
435/50 R19.5" steel rims, factory silver ET 120.
Electrics
24 volts, 4 x 3-chamber LED taillights with resistors plus 2 round combined reversing/rear fog LED lights, side yellow LED lighting, license plate lighting in LED, 1 x 15-pin socket at the front, without connection cable.
Floor
Phenolic plywood approx. 30 mm thick, cross joints with omega insert, on longitudinal subframes for high point load capacity; maximum fork axle load up to 7,100 kg.
Body
Mounted superstructure
Front wall / front corner posts with signs of use, 2,580 mm high, steel corner posts in volume design, locking mechanism for side curtain at front wall, "Crash Blocker" steel bump guard inside lower area at approx. 140 mm height.
Centre posts
Pair of sliding posts, moveable along the entire length, with 7 insertion pockets.
Slats
Rows of aluminium V-insert slats incomplete.
Fliegl "I-Lock" integrated door lock.
Tarpaulin shows signs of use, tarpaulin with welded horizontal and vertical straps.
Roof
Sliding roof, rear end-lift, roof can be moved from rear to front, L-type, tarpaulin color: white. Hydraulic lifting roof on both sides, one cylinder per stanchion, each with a hand pump integrated in the stanchion, can be raised by 400 mm, front with 3 driving positions: internal height approx. 2,900 mm / approx. 2,950 mm / 3,000 mm, set to approx. 2,950 mm.
Anti-ice system with 1 central hose, automatic forced ventilation via brake light (not available with roof that opens from the front). Optimized rain gutter at the rear, at the top of the end crossbar, above the doors.
Operating Notes
Special permit required if the overall length exceeds 16,500 mm.
Certification / Plates
Cargo securing certificate according to EN 12642 XL (valid only in conjunction with 4 rows of aluminium slats)
Additionally, DC 9.5 certificate, heavy-duty pallet stops on both sides, approx. 25 mm high, loading height reduced by approx. 2
Küçük ilan
Heilbronn
2.359 km
Roll-off dorse
Außenroller 20 AR
Ara
Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Donanım: ABS, Equipment: 20 AR External Roller
* Novagrau
* 2-axle trailer chassis for containers
* External roller version (20AR)
* Dimensions and weights:
* External reference length approx. 6,896 mm
* Total width approx. 2,500 mm
* Loaded ride height approx. 1,175 mm
* Roller track length approx. 6,880 mm
* Wheelbase 5,100 mm
* Total unladen weight approx. 3,860 kg
* Technically permissible gross weight approx. 20,000 kg
* Permissible gross weight approx. 18,000 kg
* Payload approx. 14,140 kg
* Suitable for containers from 5,000 to 7,000 mm in length according to DIN 30722
* Chassis with cross members, welded box-section longitudinal beams in QSTE steel
* 4 pneumatically operated container locks
* Side underrun protection closed according to RL 89/297/EEC
* Turntable
* 980 FM turntable including ball bearing slewing ring 90/1100/22 (low maintenance)
* Drawbar
* Drawbar 2600/980/100/30, inclined towing eye
* With height adjustment (tension spring with turnbuckle)
* Drawbar with DIN towing eye, inner D=40 mm, outer D=110 mm, thickness 30 mm
* Axles
* 2 x 10 t axles for 19.5” disc brakes, manufacturer as per selection
* Brake disc diameter approx. 370 mm
* Wheel mounting with centering in accordance with DIN 74 361 Part 3
* Brake system
* Air brake system according to EU directive with Duomatic coupling head
* Conventional air suspension system
* EBS type 4S/3M, electronic brake system with ROLL Stability
* Dual-membrane spring brake cylinders on rear axle
* Release valve for separate disengagement of spring brake
* Lighting system
* 24V full LED lighting according to RL 76/756/EEC with multi-chamber tail lights and integrated license plate lamp
* 1 x 15-pin connector
* 6 LED side marker lights with flashing function
* 2 white LED clearance lights at the front
* 2 separate rear LED marker lights
* 1 additional reversing spotlight
* Regional transport tyres, tyre manufacturer as per selection
* 8 x 265/70R19.5 (7.5x19.5)
* Steel wheels ET 138
Ledpoyv Ttpefx Adlorn
* Unpainted wheel nuts
* Including tyre pressure monitoring
* Aluminium underrun protection
* Two vertical Delta collision protection profiles protect the rear during loading and unloading
* Accessories
* 4 plastic mudguards, half-shells front and rear, single wheel guards
* 4 anti-spray mudflaps, neutral
* 1 lockable plastic toolbox
* 1 wheel chock with holder
* 1 A-sign for the transport of waste materials
* 1 hanging net box
* Chassis colour: MB7350 Novagrau
* Wheel hub colour: black KTL
* Rim colour: RAL 9006 silver
* Rear contour marking: red
* Side contour marking: white
* Closed SSE: RAL7001 silver grey
* Rear closure/light panel: RAL7001 silver grey
* Underrun protection: aluminium, anodised (silver)
All information without guarantee. Subject to errors and prior sale.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Heilbronn
2.359 km
Roll-off dorse
Außenroller 20 AR
Ara
Durum: yeni, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Donanım: ABS, Equipment:
* 20 AR external roller
* Novagrau
* 2-axle trailer chassis for containers
* External roller design (20AR)
* External reference length approx. 6,896 mm
* Overall width approx. 2,500 mm
* Ride height loaded approx. 1,175 mm
* Roller track length approx. 6,880 mm
* Wheelbase 5,100 mm
* Curb weight (fully equipped) approx. 3,860 kg
* Technical possible gross weight approx. 20,000 kg
* Permissible gross weight approx. 18,000 kg
* Payload approx. 14,140 kg
* Suitable for containers from 5,000 to 7,000 mm in length, as per DIN 30722
* Chassis with cross members, welded main beams in box design, made of QSTE steel
* 4 pneumatically operated container locks
* Closed lateral guard as per RL 89/297/EEC
* 980 FM bogie incl. ball bearing turntable 90/1100/22 (low maintenance)
* Drawbar 2600/980/100/30, inclined towing eye
* With height adjustment (draw spring with turnbuckle)
* Drawbar with DIN towing eye, inner Ø 40 mm, outer Ø 110 mm, thickness 30 mm
* 2 x 10 t axles for 19.5” disc brakes, brand at manufacturer’s discretion
* Brake disc diameter approx. 370 mm
* Wheel mounting with centering in accordance with DIN 74 361 part 3
* Pneumatic brake system according to EU standard with Duomatic coupling head
* Conventional air suspension system
* EBS type 4S/3M, electronic braking system with ROLL Stability
* Double membrane spring brake chambers on rear axle
* Release valve for independent release of the spring-loaded parking brake
* Lighting system 24 Volt, full LED as per RL 76/756/EEC, with multi-chamber lights and integrated license plate light
* 1 x 15-pin electrical connector
* 6 LED side marker reflectors with integrated indicator function
* 2 front white LED marker lights
* 2 rear LED lane-keeping lights, mounted separately
* Regional use tyres, tyre brand at manufacturer’s option
* 8 x 265/70R19.5 (7.5x19.5)
* Steel wheels, offset 138 mm
* Wheel nuts unpainted
* Incl. tyre pressure monitoring
Lrjdpfx Ajyv Ttcodlon
* Aluminium underrun protection
* Two vertical Delta impact protection profiles to protect rear during loading/unloading
* Accessories:
* 4 plastic half-shell mudguards front and rear, single wheel guards
* 4 anti-spray mud flaps, neutral
* 1 lockable plastic toolbox
* 1 wheel chock with bracket
* 1 A-sign for waste transport
* 1 hanging mesh box
* Chassis colour: MB7350 Novagrau
* Wheel hub colour: black KTL
* Rim colour: RAL 9006 silver
* Rear contour marking: red
* Side contour marking: white
* Closed SSE: RAL7001 silver-grey
* Rear end/lighting panels: RAL7001 silver-grey
* Underrun protection: aluminium anodised (silver)
* Locking hooks: yellow
All information provided without guarantee. Subject to errors and prior sale.
Küçük ilan
Espelkamp
2.531 km
Lazer kesim makinesi
SAN LaserSA-AT6025 Colossus 30kW
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, kontrol tipi: PLC kontrollü, otomasyon derecesi: yarı otomatik, tahrik tipi: elektrikli, kontrolör üreticisi: Siemens, lazer tipi: fiber lazer, lazer kaynak üreticisi: Max Photonics, lazer kaynağı modeli: MAX 6kW mit CE, lazer gücü: 12.000 W, sac kalınlığı (maks.): 80 mm, maks. sac kalınlığı çelik: 80 mm, paslanmaz çelik sac kalınlığı (maks.): 60 mm, alüminyum sac kalınlığı (maks.): 50 mm, pirinç sac kalınlığı (maks.): 50 mm, bakır sac kalınlığı (maks.): 50 mm, masa uzunluğu: 6.000 mm, masa genişliği: 2.500 mm, çalışma uzunluğu: 6.000 mm, çalışma genişliği: 2.500 mm, konumlandırma hassasiyeti: 0,3 mm, tekrar doğruluğu: 0,3 mm, giriş voltajı: 380 V, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, soğutma tipi: su, basınçlı hava bağlantısı: 8 bar, toplam ağırlık: 13.500 kg, toplam uzunluk: 14.500 mm, toplam genişlik: 4.500 mm, garanti süresi: 12 aylar, Donanım: CE işareti, acil durdurma, dokümantasyon / kılavuz, duman emişi, emniyet ışık bariyeri, merkezi yağlama sistemi, soğutma ünitesi, toz emişi, Fiber Laser Cutting Machine 6025, 30 kW – Overview
Safety & Protection
Fully enclosed metal safety housing with radiation-proof doors and windows.
Environmentally friendly and operator-safe.
Work Platform
High and low parallel platform:
Front end: Laser cutting.
Rear end: Loading and unloading.
No mutual interference → increased work efficiency.
Machine Structure
30 kW bed structure:
Time-segmented, zoned dust extraction.
High heat dissipation, resistant to thermal influences.
Industrial auxiliary equipment: air conditioning, dedicated cooling system, constant temperature & humidity → stable performance & extended service life.
Precision Guarantee:
Bed processed by large gantry milling machine.
Industrial linear guides, gears, and ball screw drives.
Full servo control, double-sided dual drive.
High industrial quality and precision.
German assembly technology:
Precision calibration with laser interferometers
Fine craftsmanship, easier maintenance.
Control & Software
FSCUT 6000 control system (included).
FSCUT software package:
Lrodpfx Ajzb Uinjdlsn
Market-proven, secure, and user-friendly software.
Supports intelligent networking.
Professional nesting software: CypNest (included).
Key Components
Laser cutting head BOCI BLT442
Laser source MAX 30 kW, CE compliant
Water chiller HANLI 20 kW
Guide rail TAIWAN DTX 30+20+20
Frame TAIWAN JT
Reducer Germany Techmach
Cameras 3 pcs
Servo motor BOCHU
Proportional valve Felton
Electronic components SCHNEIDER
Triple air inlet: nitrogen, oxygen, air
Lubrication system: automatic oil supply
Accessories
30 protective lenses, 30 nozzles, toolbox.
Optional: Air compressor ARS-30HP-XF-1.6 MPa, dust collector 11.5 kW.
Küçük ilan
Ystad
2.427 km
Dilimleyici
CARNITECH VISION SLICERIPS 3000
Üretim yılı: 2008, durum: yenilenmiş (kullanılmış), CARNITECH VISION SLICER IPS 3000 ID.NO. 2191 Carnitech Vision dilimleyici IPS 3000 için gevşek. Automatisk brett påläggning års mod 2008.
Ledshpz Uvjpfx Adljrn
Küçük ilan
Wijchen
2.687 km
EXV 14 i * DEMO * Atex EX * Miretti 3G / Bölge 2 * YENİ akü !!
STILLEXV 14 i * DEMO * Atex EX * Miretti 3G / Zone 2 * NEW battery !!
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2018, çalışma saatleri: 690 h, yük kapasitesi: 1.400 kg, kaldırma yüksekliği: 2.940 mm, yakıt türü: elektrikli, direk tipi: dupleks, inşaat yüksekliği: 1.920 mm, Üretici + model: STILL EXV 14 i * EX * Miretti 3G / Bölge 2 *
Direk: 2F2940
ID: 26071.9344
Kategori: Demo
Direk: 2F2940
İndirilmiş yükseklik: 1920 mm
Kaldırma yüksekliği: 2940 mm
Ledpfx Aezaf R Hjdljrn
Kapasite: 1400 kg
Başlangıç: Evet
Yıl: 2018
Saat: 690 saat
Akü: TAMAMEN YENİ * 24v / ... ah * Üretim yılı 2026
Seçenekler: * EX * MIRETTI - E9856
Sistem / Sertifika = AR 16 ATEX 015
Gaz grubu = IIB
Sıcaklık sınıfı = T3 Gc
Tip = Kat 3G (BÖLGE 2'de izinli) Donanım:
- SERVO DİREKSİYON
- Full Free Lift (FFL) direkli ÇİFT kat istifleyici!!
- İlk kaldırma!! TAMAMEN YENİ GİBİ!!!
Küçük ilan
Wijchen
2.687 km
EXV 14 i * DEMO * Atex EX * Miretti 3G / Bölge 2 * YENİ akü !!
STILLEXV 14 i * DEMO * Atex EX * Miretti 3G / Zone 2 * NEW battery !!
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2018, çalışma saatleri: 724 h, yük kapasitesi: 1.400 kg, kaldırma yüksekliği: 2.940 mm, yakıt türü: elektrikli, inşaat yüksekliği: 1.920 mm, Üretici + model: STILL EXV 14 i * EX * Miretti 3G / Bölge 2 *
Direk: 2F2940
ID: 26071.9342
Kategori: Demo
İndirilmiş yükseklik: 1920 mm
Kaldırma yüksekliği: 2940 mm
Kapasite: 1400 kg
İlk kaldırma: Evet
Yıl: 2018
Çalışma Saati: 724 saat
Akü: TAMAMEN YENİ * 24v / ... ah * Yıl 2026
Opsiyonlar: * EX * MIRETTI - E9658
Lredszaf Ryjpfx Adlsn
Sistem / Sertifika = AR 16 ATEX 015
Gaz grubu = IIB
Sıcaklık sınıfı = T3 Gc
Tip = Kategori 3G (BÖLGE 2'de izinli)
Donanım:
- HİDROLİK DİREKSİYON
- Çift istifleyici Full Free Lift (FFL) direğiyle!!
- İlk kaldırma!! TAMAMEN YENİ GİBİ!!!
Küçük ilan
Wijchen
2.687 km
LWE 160 * Atex EX * Miretti 2G / Bölge 1 * YENİ akü !!
BTLWE 160 * Atex EX * Miretti 2G / Zone 1 * NEW battery !!
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2018, çalışma saatleri: 535 h, yük kapasitesi: 1.600 kg, yakıt türü: elektrikli, Üretici + model: BT LWE 160 * EX * Miretti 2G / Zone 1 *
ID: 26061.2030
Kategori: Kullanılmış
Çatallar: 1150 x 570 mm
Kapasite: 1600 kg
Yıl: 2018
Çalışma saati: 535 saat
Lredpfx Aezaf N Aedlsn
Akü: Komple YENİ * 24v / 225Ah * Üretim tarihi 04/2026
Opsiyonlar: * EX * MIRETTI E9098
Sistem / Sertifika = AR 17 ATEX 016
Gaz grubu = IIB
Tip = Kategori 2G (ZONE 1 ve 2'de kullanılabilir)
Sıcaklık sınıfı = T4
İsteğe bağlı olarak RAVAS tartım sistemi ile donatılabilir!!!
Küçük ilan
Wijchen
2.687 km
EXV 14 * DEMO * Atex EX * Miretti 3D / Bölge 22 !! YENİ akü !!
STILLEXV 14 * DEMO * Atex EX * Miretti 3D / Zone 22 !! NEW battery !!
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2016, çalışma saatleri: 570 h, yük kapasitesi: 1.400 kg, kaldırma yüksekliği: 2.350 mm, yakıt türü: elektrikli, direk tipi: dupleks, inşaat yüksekliği: 1.670 mm, Üretici ve model: STILL EXV 14 * EX * Miretti - 3D / Zone 22
Direk: 2F2350
ID: 23121.4034
Kategori: Demo
Direk: 2F2350
Kapalı yükseklik: 1670 mm
Kaldırma yüksekliği: 2350 mm
Kapasite: 1400 kg
Yıl: 2016
Çalışma saati: 570 saat
Akü: Tamamen YENİ 24v / 375ah * Ürt. 11/2023
Donanımlar: * EX * MIRETTI !!!!!
Sistem = Miretti AR 16 ATEX 015
Gaz grubu = IIIB
Sıcaklık sınıfı = 266°C
Lsdpfxozafpij Adlern
Tip = Kat 3D (ZONE 22'de kullanım için uygun)
GÜÇLÜ DİREKSİYON
Komple YENİ GİBİ!!
Küçük ilan
İtalya
2.465 km
ESAB SUPRAREX 3100 SXE HD 1000
ESABSUPRAREX 3100 SXE HD 1000
Ara
Durum: işlem için hazır (kullanılmış), Üretim yılı: 2020, lazer gücü: 54.000 W, eksen sayısı: 3, Bu 3 eksenli ESAB SUPRAREX 3100 SXE 2020 yılında üretilmiştir. Maksimum 8.000 mm boru uzunluğu ve maksimum 750 mm boru çapı ile yüksek çözünürlüklü plazma kesme teknolojisine sahiptir. Makine, gelişmiş eğimli kesim özelliklerine ve hassas kılavuzlara sahip sağlam bir yapıya sahiptir. Yüksek kaliteli boru kesme yetenekleri elde etmek istiyorsanız, satılık ESAB SUPRAREX 3100 SXE boru kesme makinesini düşünün. Daha fazla ayrıntı için bizimle iletişime geçin.
• Kesme teknolojisi: Yüksek Çözünürlüklü Plazma
• Tüp kapasitesi
• Maksimum boru uzunluğu: 8.000 mm
• Min/Maks boru çapı: 100 mm / 750 mm
• Min/Maks duvar kalınlığı: 3 mm / 20 mm
• Kesim yetenekleri
• Düz kesim, eğimli kesim, V eğimler, Y eğimler, 3D boru kesimi
• Eksen konfigürasyonu / hareketleri
• X (uzunlamasına): Portalın her iki tarafında elektronik eksen kontrollü çift senkronize fırçasız tahrik; kılavuz uzunluğu 11.000 mm; çift motorizasyon
• Y (enine): Kremayer ve pinyon şanzımanlı fırçasız tahrik
• Z (dikey): Motorlu torç konumlandırma ekseni, 4.000 mm/dk'ya kadar hız
• Tüp döndürme ekseni: Boru dönüşü için senkronize mil, 8.000 mm'ye kadar boru uzunluğu
• Eğimli kafa - VBA BİLEK
• Dönüş: ±540°
• Eğim/eğim ayarı: ±60°
• Kesme eğim açısı: ±45°
• Maksimum eğim hızı: 38°/sn
Lrjdpey Ephaefx Adlon
• Kesme sırasında teğetsel kontrol
• Ark voltajlı torç yükseklik kontrolü
• Eğimli kesim için mekanik sentil torç yükseklik kontrolü
• Meşale çarpışma koruması
• Makine konstrüksiyonu
• Ağır hizmet tipi makine çerçevesi
• Boyuna ve enine hassas kılavuzlar
• Hassas kremayer & pinyon tahrik sistemi
• Fırçasız motorlar
• Ayna / iş mili
• Boru kesimi için senkronize iş mili
• Ayna boyutu: 500 mm
• Açık delik: 150 mm
• Tüp destekleri
• 3 trapez vida konumlandırmalı manuel destek taşıyıcıları
• Plazma jeneratörü
• Model ESAB iSeries300i
• Maksimum akım: 300 A (aralık 5-300 A)
• Çıkış gerilimi: 180 V
• Güç kaynağı: 380 V / 50-60 Hz
• Görev döngüsü (40°C): 100%
• Maksimum çıkış gücü: 54 kW
• Proses gazları
• Plazma gazları: Hava / O2 / Ar-H2 / N2
• Koruyucu gazlar: Hava / N2 / O2 / H2O
• Jeneratör boyutları
• 1219 x 898 x 1031 mm
• Kontrol sistemi
• ESAB VISION T5 CNC
• 18,5" renkli dokunmatik ekran, eldivenle çalıştırılabilir
• OpWizard operatör yardım yazılımı
• Yazılım
• ESAB Boru Kesme Programlama Yazılımı
Ek ekipman
• Çıtalı düz kesim tablası, 1.500 x 1.000 mm
Küçük ilan
Sangerhausen
2.319 km
Panelvan
MANTGE 3.180 Kasten L3H2 TEMPOMAT LED STANDHZ NAVI
Ara
Durum: ikinci el, kilometre: 10 km, güç: 130 kW (176,75 bg), ilk tescil: 06/2024, yakıt türü: dizel, bir sonraki muayene (TÜV): 06/2026, renk: turuncu, vites türü: otomatik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, toplam uzunluk: 5.986 mm, toplam genişlik: 2.040 mm, toplam yükseklik: 2.355 mm, yükleme alanı uzunluğu: 3.201 mm, yükleme alanı genişliği: 1.832 mm, yükleme alanı yüksekliği: 1.726 mm, Donanım: ABS, elektronik denge programı (ESP), klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, * Factory warranty 4 years
* Hill start assist
* Emissions system, EU6 AR
* Pre-installation for towing device (incl. trailer stabilisation)
Lrsdpfjtr Swuex Adljn
* One front towing eye
* Driver and passenger airbags with passenger airbag deactivation
* Roof console with storage compartments, two 1-DIN slots, and reading light
* Sun visors, foldable and swiveling to the side
* Exterior mirrors, electrically adjustable, heated and folding
* Exterior mirrors left & right, convex, with integrated LED turn signal and wide-angle section
* Front-wheel drive
* Emergency brake assist
* Rubber floor in cab
* Rear door/tailgate trim
* Electronic Stability Program (ESP) and ABS with electronic differential lock
* Standard roof
* Front and rear parking sensors and Flank Protection Assist
* Grab handles on the rear pillars
* USB dual function module 45W
* Daytime running lights with automatic headlight switching, "Leaving Home" and manual "Coming Home" function
* Premium interior sound insulation
* 4th engine 2.0L unit 03N.G
* Cruise control with speed limiter
* 8-speed automatic transmission
* Grab handle on the partition wall in cargo area
* Climatic air conditioning in cab
* LED main headlights with LED daytime running lights
* LED interior lighting concept in passenger/cargo area
* Rear view camera "Rear View"
* High beam assistant "Light Assist"
* Multifunction steering wheel (3-spoke)
* 4 speakers: 2 tweeters, 2 woofers
* Multifunction display "Plus"
* Fatigue detection
* Wired & Wireless App-Connect
* 2.0 l/130 kW (4V) BIT diesel engine
* Standard navigation device with media and internet package
* Fog lights including cornering light
* Online service with OCU, with head unit coding, without immobilizer network
* 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black
* MAN Media Van Business
* 12V socket and 2 cup holders in instrument panel
* All-season tyres
* Standard wheelbase 3,640 mm
* Three-point automatic seat belts with height adjustment and electric belt tensioners front
* Rear wing doors with enlarged opening angle
* Front, rear and rear side windows in heat-insulating glass
* 12V sockets in cab (3 in the dashboard, with LHD additionally 1 in left seat base)
* “ergoComfort” suspension seat left
* Double passenger bench seat right, with storage compartment and folding middle backrest
* Belt monitor, electrical contact in belt lock
* Seat upholstery in "Toronto Grid" fabric
* Seat heating, adjustable
* Side marker lights
* Registered as 3.5t
* Start-stop system with brake energy recuperation
* Lane change assist
* Crosswind assist
* Intermittent windshield wiper function with light and rain sensor
* Central locking with remote control and interior operation
* Partition bulkhead
* Digital radio reception (DAB+)
* Front axle (1,800 kg load capacity)
* Mobile phone interface
* Lashing rings for load securing
* Laminated windscreen in heat-insulating glazing, heated
* Permissible total weight 3,500 kg
* Auxiliary water heater, programmable, with remote control
* Registered as a truck with N1 registration (up to 3.5t permissible total weight)
* Front disc brakes, 16"
* Fuel tank 75 l
* Pure orange R2011
* With voice control
* MAN Media Van Business Navigation package with 4 speakers
* Distributor driver assistance package *valid from first registration up to max. 80,000 km or 2 years, no mileage cap
Conversion service for box-type commercial vehicles possible: e.g.
Küçük ilan
Wellingborough
3.123 km
Sac bükme makinası
MG SRLAR140
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2013, MG SRL AR 140 Profil Bükme Halka Makaraları - 2013 Yılı.
Teknik Özellikler: Mil Çapı Ø140 mm, Rulo Sayısı 3, Direnç Momenti 130 cm³
Yassı demir kapasitesi: 220 x 50 x R=2000 mm
Yatay ve dikey: Evet, yatay + dikey
X Ekseni strok: 400 mm
Ledpfjzc N Rcox Adljrn
Boru kapasitesi: 180 x 4 x R=4000 Ø x mm
Çubuk kapasitesi: 80 x 80 x R=1000 mm
HEA profil kapasitesi: 180 x R=1800 mm
Boyutlar: Uzunluk 2100 mm, Genişlik 1900 mm, Yükseklik 2100 mm, Ağırlık 6500 kg
Küçük ilan
Schiffweiler
2.507 km
Panelvan
VWTGE L4H3 - Mietkauf ohne Anzahlung 555 EUR mtl.
Ara
Durum: ikinci el, kilometre: 550 km, güç: 103 kW (140,04 bg), ilk tescil: 05/2026, yakıt türü: dizel, boş ağırlık: 2.228 kg, azami yük ağırlığı: 1.272 kg, toplam ağırlık: 3.500 kg, lastik boyutu: 235/65R16C, dingil konfigürasyonu: 2 dingil, dingil mesafesi: 4.490 mm, renk: beyaz, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: Euro 6, süspansiyon: diğer, koltuk sayısı: 2, toplam uzunluk: 6.836 mm, Donanım: ABS, diferansiyel kilidi, hava yastığı, hız sabitleyici, immobilizer sistemi, klima, merkezi kilitleme, tır çekici bağlantısı, Demonstration vehicle without prior operational use. Leasing without down payment – monthly leasing rate €555 net, 72-month term. Model: TGE 3.140, Vehicle type: Panel van L4H3, Version: TGE 6-speed manual transmission, front-wheel drive. Engine power: 103 kW (140 hp). First registration: demo vehicle with short-term registration, May 24. Mileage: 550 km from transfer and demonstration use. Optional custom interior fit-out available. Wheel bolts without wheel locks. Vehicle classification differentiation -7C0-. Hill start assist. Emissions concept: EU6 AR. Preparation for trailer coupling (incl. trailer stabilisation). Driver and passenger airbags with passenger airbag deactivation. Roof console with storage compartments, two 1-DIN slots, and reading lamp. Sun visors, foldable and swiveling to the side. Exterior mirrors, electrically adjustable and heated. Left exterior mirror, convex, with integrated LED turn signal and wide-angle section. Right exterior mirror, convex, with integrated LED turn signal and wide-angle section. Front-wheel drive. Emergency brake assist. Battery 520 A (92 Ah). Rubber flooring in cab. Folding handbrake lever. Battery and alternator components without country-specific design regulations (630RC). On-board tools. Electronic Stabilisation Programme (ESP) and ABS with electronic differential lock. On-board literature in German. Operating voltage: 12 V. High roof, painted in vehicle color. Suspension/damping and stabilisation package 1. Electronic immobilizer. Entry handles on rear pillars. Daytime running lights. Electrical terminal strip and KFG 1. Without maximum speed limiter. Enhanced interior noise insulation. Three-phase alternator 140 A. Front axle weight category 2. Cruise control with speed limiter. 6-speed manual gearbox. Rear wing doors without window cut-outs. Entry handle on compartment partition in the load area. Climatic air conditioning in cab. Halogen dual headlights. Warning signs without country group. LED interior lighting concept in passenger/load compartment. Instrument cluster with km/h display. Panel van dashboard, standard climate zones. Radiator grille, black with chrome trim.
Ljdoylzp Aspfx Adljrn
Küçük ilan
Cloppenburg
2.586 km
2005 Vollmer QXD 400
VollmerQXD 400
Ara
Üretim yılı: 2005, durum: ikinci el, Universal machine for eroding, grinding, and polishing various PCD tools up to 400 mm diameter and 400 mm length in production.
Accessories:
- Full enclosure,
- Software for path curve management,
- P-system software for helical cutters,
- End mill software (207/208),
- Software for disc-shaped workpieces, face machining (221/222/223/224),
- Software for profiled workpieces (233/234/239/240),
- Software for cutting tools and profiled cutting tools (255/256/257/258/260/261/262/263),
- Software for disc-shaped workpieces (264/265),
- Software for shank and jointing cutters (267/268/277/278),
- Software for step tools (271),
- Slitting saws software (299),
Lrsdpfxjw S I Dgo Adljn
- Flat toothed saw software (301),
- Single-sided chamfered saw software (302/303),
- Alternate toothed saw software (304),
- Trapezoid-tooth saw software (309),
- Flat-roof tooth saw software (310),
- Flat-trapezoid tooth saw software (311),
- Alternate tooth saw with chamfer software (312),
- Shank and jointing cutter software (7/8),
- Profiled shank and jointing cutter software (33/34),
- Cutting tool and profiled cutting tool software (53/54/55/56/57/58),
- Disk-type workpiece software (64/65),
- Shank and jointing cutter software (67/68/77/78),
- Compensation software (90),
- Flat toothed saw software (101),
- Single-sided chamfered saw software (102/103),
- Alternate toothed saw software (104),
- Trapezoid-tooth saw software (109),
- Flat-roof tooth saw software (110),
- Flat-trapezoid tooth saw software (111),
- Alternate tooth saw with chamfer software (112),
- Software for polishing profiled cutting tools (757/758/760/761),
- Dielectric filter system,
- Automatic fire extinguishing system according to DIN 14497,
- Standard programs for measuring, eroding, etc.,
- Software program for chamfering cutting edges of workpieces, automatic diagnostics (program for machine operation status with text output on the screen),
- Software for helical cutters.
Küçük ilan
Zuzenhausen
2.387 km
Diğer makineler
AMIS2-Schnecken Ballenauflöser AR2
Ara
Durum: yeni, makine/araç numarası: 10463, AR serisi, yavaş çalışan makinelerden oluşur. 2, 4, 6 veya 8 helezon mili ile mevcuttur. Makineler, her bir helezon ünitesinin şasiye bağımsız ve ayrı olarak monte edileceği şekilde tasarlanmıştır.
Helezonlu kırıcılar, kırılgan malzemelerin (ahşap, kağıt, alçı, taş yünü vb.) parçalanması için tasarlanmıştır. Makineler, cam, metal parçaları, taş gibi yabancı maddelere karşı büyük ölçüde duyarsızdır.
AR serisi, örneğin PET şişe balyaları için balya çözücü olarak kullanıma son derece uygundur.
Ledpfx Asyr Ti Iodlsrn
Küçük ilan
Wiesenfelden
2.123 km
3D yazıcı
KeyenceAGILISTA-3200W
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2020, toplam uzunluk: 950 mm, toplam yükseklik: 1.360 mm, toplam genişlik: 700 mm, toplam ağırlık: 188 kg, besleme uzunluğu X ekseni: 297 mm, y ekseni ilerleme uzunluğu: 210 mm, Z ekseni ilerleme mesafesi: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W.
All maintenance has been carried out by Keyence.
A full service was recently performed by Keyence and the unit has been in standby mode since then.
The printer is in top condition.
Complete accessories for immediate start included:
1x Cartridge with build material
1x Cartridge with support material
3x Waste containers
1x Settling tank for printed parts
Cleaning kit for parts and printer
Ljdsy Hmhhopfx Adlsrn
Viewing by appointment possible.
On-site instruction/training available.
Technical data:
- Build materials: AR-M2 (transparent build material), AR-H1 (heat-resistant build material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness])
- Support material: AR-S1 (water-soluble support material)
- Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm)
- Resolution: 635 × 400 dpi
- Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm
- Interface: Ethernet 10BASE-T / 100BASE-TX
- Operation: Color touch panel
- Dimensions: 95 x 70 x 136 cm
- Weight: 188 kg
If you have any questions or require further information, feel free to send us a message or give us a call.
Küçük ilan
Burghaun
2.382 km
Parçalayıcı
SeppiM. MINI-BMS 105 Forstmulcher / OQ45-5 / 5-10 to DE
Ara
Durum: ikinci el, Üretim yılı: 2024, For inquiries regarding the attachment, Mr. Herden is your contact (by phone).
Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5–10 t / DEMO – machine / in stock & immediately available / excellent condition
Price: €20,090.00 net / €23,907.10 gross
- Working width: 1.05 m
- Overall width: 1.20 m
- Depth: 1.03 m
Lrjdpfx Aey Rdnaedljn
- Height: 0.72 m
- Mulching attachment for excavator mounting
- Suitable for mulching along riverbanks, in forests, and other difficult-to-access areas
- Mulches shrubs and wood up to 10 cm diameter
- For excavators from 5–10 tonnes
- Can be mounted to various adapter plates
- Drive designed for hydraulic motor depending on the carrier unit's flow rate
- Indirect belt drive with 5 V-belts
- Reinforced housing made of wear-resistant AR 400 steel
- Drop-forged counter blades
- Hydraulically adjustable hood
- Continuous hinge across the full hood length
- Chain front shield
- Chain rear shield
- Height-adjustable skid plates, reinforced with tungsten carbide plate
- Colour: red RAL3020 · anthracite RAL7021
OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts)
21 pieces, total machine weight with OPT 228*: 445 kg
OPT 513 CUT CONTROL
- Depth limiter for rotor with fixed tools
OPT 291 VARIO FLOW
Axial piston hydraulic motor with variable displacement
29–58 cm³ and pressure relief valve
- Displacement in cm³ (min-max): 29–58
- Required hydraulic pressure in bar (min-max): 150–250
- Required hydraulic flow rate in l/min (min-max): 60–130
Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate
- approx. 200 mm high
We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) immediately available.
Our warehouse holds a wide range of immediately available Seppi products!
Feel free to contact us at / .
We will also be happy to provide a financing offer upon request.
We are an official Seppi M. sales and service partner.
We are an official Holp sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Westtech sales and service partner.
We are an official DMS sales and service partner.
We are an official JCB construction equipment sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply you with the complete Seppi product range!
Errors and prior sale excepted!
Internal reference: 170051
= Further Information =
Please contact Marius Herden for more information.
Küçük ilan
Mahlstetten
2.345 km
Plazma kesme makinesi
MicrostepMastercut Eco Plus 3001.15
Ara
Durum: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2202, X ekseni hareket mesafesi: 3.000 mm, Y ekseni hareket mesafesi: 1.500 mm, giriş akımı türü: trifaze, giriş voltajı: 400 V, giriş akımı: 50 A, Microstep Mastercut Eco Plus 3001.15,
Year of manufacture: 2017,
Control: IMSNC,
Oxyfuel cutting table: 3000 x 1500 mm,
Extraction channel left / right,
Plasma source: Kjellberg HiFocus 161i,
Adjustable 10 - 160 A,
Power Source HiFocus 161i PLUS
• Flexible adjustment of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control with ultra-fast cutting current regulation
• Monitoring of process through torch cooling, ignition time, pilot arc time, short-circuit time for torch ignition and power source
• Indication of operating states and error messages via LED and display
• Analog and serial interface for connection to CNC controllers
• Infinitely variable cutting current adjustment from 10 - 160 A and for marking from 5 - 25 A
• Optimum piercing with stepless delay time for the main arc and adjustable current ramp-up
Lredpfx Asy Nd Hyodlon
• Adjustable current reduction for cornering, start, and end signals of the guiding system
• Automatic display of preset cutting current
• Serial data transfer for PC diagnostics
Plasma Cutting Technology: Contour Cut
• Further development of HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cut quality and contour accuracy
• Holes with angular deviation according to DIN EN ISO 9013 in range 2-4
• Low angle deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No time-consuming rework – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment as default
Plasma Torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• Quick-change torch PerCut 210 with threaded lock for fast and convenient setup
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long lifetime of consumables saves resources
• Narrower kerf results in less emissions and waste
• Significantly lower gas consumption than competitors thanks to effective liquid cooling up to the nozzle tip
• Reduced gas consumption also means lower noise levels
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking with the same consumables
Power Source HiFocus 161i
Power supply: 400 V; 3 phase; 50 Hz
Max. connected load: 28 kVA (100% duty cycle)
Main fuse (slow): 50 A
Protection class: IP 22
Open-circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range:
Max. 50 mm
typically 0.5 – 38 mm recommended
Max. piercing thickness: 30 mm
Weight: 206 kg
PerCut 200 plasma machine torch
PerCut 210 quick-change torch
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, air, N2/H2 (F5)
Küçük ilan
Dębica
1.648 km
Agregat Cooling Solution
Area coolingAPTXN-12
Ara
Durum: ikinci el, Fonksiyonellik: kontrol edilmemiş, Area Cooling Solution Agregatı Satılıktır
Lrodpfx Aoyt I N Ssdlon
Model: APTXN-12;
Soğutucu Akışkan Deposu Tipi: AR-10l;
Bristol Kompresör No: H79A723D8EA OC52;
Net fiyat 470 Euro, pazarlığa açıktır.
Küçük ilan
İrlanda
3.658 km
Smipack ısı büzüşme tüneli
Smipack Heat Shrink TunnelBP802 AR 350P
Ara
Üretim yılı: 2021, durum: mükemmel (kullanılmış), SMIPACK BP802 AR 350P, 90° besleme konveyörlü ve pnömatik yapıştırma barlı tam otomatik monoblok paket shrink ambalaj makinesidir. Şişe, kutu ve karton gibi toplu ürünleri sadece film ile veya karton altlık + film kombinasyonunda gruplayıp paketlemek için tasarlanmıştır; saatte 20 paket kapasitesine kadar çalışır.
Teknik Özellikler
Makine Tipi: Tam otomatik monoblok shrink ambalaj makinesi (90° besleme)
Maksimum Çıkış: Dakikada 20 pakete kadar
Yapıştırma Barı Uzunluğu: 760 mm
Maksimum Ürün Yüksekliği: 380 mm
Maksimum Film Rulo Boyutu: 750 mm (genişlik) × ∅ 350 mm (çap)
Kurulu Güç: Bölgeye bağlı; 220-240 V veya 380-415 V destekler
Makine Ölçüleri: 3675 mm (U) × 2500 mm (Y) × 2105–2265 mm (ayarlanabilir yükseklik)
Lrsdpfxozf Inks Adljn
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Roreto
2.349 km
Çift taraflı FORMAT ve KENAR BAĞLAMA MASKESİ
BIESSEStream SB2 9.5
Ara
Durum: mükemmel (kullanılmış), Çift taraflı FORMAT ve KENAR BANTLAMA MAKİNESİ (tek hatta 1° ve/veya 2° makine)
Rulo malzemesi (kenarlar) Kalınlık (min/maks) mm 0,3 - 3
Panel kalınlığı (min/maks) mm 10 - 60
Çalışma genişliği (min/maks) mm 240 - 2700
Kontrol / Yazılım SINITRA
İlerleme hızı (ayarlanabilir) m/dak 10 - 40 (İNVERTER C.N.)
Kam mesafesi (mm) 500
FORMAT İŞLEME (her iki taraf için):
Koruyucu freze (frezeleme) AS 10 (Kw 5.8)
2 x DT 10 (5,8 + 5,8) kelepçe
Püskürtme cihazı (sıvı yapışmaz için)
Lrodsu Tg Uqopfx Adljn
KENAR YAPIŞTIRMA PARÇASI (her iki taraf için):
Yapıştırma ünitesi (sıcak tutkal + ön eritici) SP30 (yüksek eriyik + kenar kılavuzu Z ekseni)
Kenar basınç bölgesi (CN kontrollü). Rulolar için kenar magazini (N° 6 kat)
IT 90-S makaslama ünitesi (Kw 0,3 x 2) 28m/dak. 0 - 25°. PNEU
Çok profilli düzeltme ünitesi (CN kontrollü) RF 30 (Kw 0,65 x 2) 0 - 25°.
Çok fonksiyonlu ünite (yarıçap frezeleme ve kalıplama ünitesi) AR 80 (Kw 0,3 x 2) 25 m/dak - ROTAX
Otomatik takım değiştirmeli motorlar (8+8 pozisyonlu takımlar)
Çoklu profil sıyırıcı ünitesi (CN kontrollü) RB 30
Düz sıyırıcı ünitesi RC 20 - Püskürtme ünitesi (parlatma sıvısı için)
SZ 30 parlatma ünitesi (Kw 0,37 x 2)
Çalışma döngüsünü hızlandırmak için tampon olarak plakalar için 'hazne' (kullanılabilir yükseklik mm 80) ile
Küçük ilan
Roreto
2.349 km
Çift Taraflı FORMAT & KENAR BANTLAMA MAKİNASI
BIESSEStream SB2 9.5
Ara
Durum: mükemmel (kullanılmış), ÇİFT TARAFLI FORMAT VE KENAR BANTLAMA MAKİNESİ (1° ve/veya 2° makine tek satırda) Rulo malzeme (kenarlar) Kalınlık (min/maks) mm 0,3 - 3 panel Kalınlık (min/maks) mm 10 - 60 Çalışma genişliği ( min/ max) mm 240 - 2700 kontrol / yazılım SINITRA besleme hızı (ayarlanabilir) m/dak 10 - 40 (INVERTER CN) güvenlik ve gürültü koruma kabin tarafı ayar ünitesi taşıyıcı manuel kam mesafesi (mm) 500 FORMAT İŞLEME (her iki taraf için) : koruyucu freze (freze) AS 10 ( Kw 5.8) 2 x Zerspanner DT 10 (5.8 + 5.8) Püskürtme cihazı (sıvı yapışmaz için) KENAR YAPIŞTIRMA PARÇASI (her iki taraf için): Yapıştırma ünitesi (sıcakta eriyen tutkal + ön eritici) SP30 (Yüksek Erime + Kenar Kontrolü EC 40 ) kenar baskı bölgesi (CN kontrollü). Rulolar için kenar magazini (N° 6 kez) uç kesme ünitesi IT 90-S (Kw 0,65 x 2) 28m/dak. 0 - 25°. PNEU çoklu profil frezeleme ünitesi (CN kontrollü) RF 40 (Kw 1 x 2) 0 - 25° çok fonksiyonlu ünite (yarıçap frezeleme ve profil frezeleme ünitesi) AR 80 (Kw 0, 65 x 2) Otomatik matkap değiştirmeli 25m/dak ROTAX motorlar (takımlar) Kanal açma/yiv açma ve profil işleme için 2 üniversal freze ünitesi FB 30 (Kw 5 x 2) 0 - 90° çok profilli sıyırıcı ünitesi (CN kontrollü) RBK - 503 (2 POZİSYON) düz sıyırıcı ünitesi RC 20 püskürtme ünitesi (polisaj için) sıvı) parlatma ünitesi SZ 30 (Kw 0.37 x 2 )
Lodpfehvahhjx Adljrn
Küçük ilan
Roreto
2.349 km
Çift taraflı FORMAT ve KENAR BAĞLAMA MASKESİ
BIESSEStream SB2 10.5
Ara
Durum: mükemmel (kullanılmış), Çift taraflı FORMAT ve KENAR BANTLAMA MAKİNESİ (tek hatta 1° ve/veya 2° makine)
Rulo malzemesi (kenarlar) Kalınlık (min/maks) mm 0,3 - 3
Panel kalınlığı (min/maks) mm 10 - 60
Çalışma genişliği (min/maks) mm 240 - 2700
Kontrol PC Tabanı Windows /SINITRA yazılımı
İlerleme hızı (ayarlanabilir) m/dak 10 - 40 (İNVERTER C.N.)
Kam mesafesi (mm) 500
FORMAT İŞLEME (her iki taraf için):
Koruyucu freze (yönlendirme) AS 10 (Kw 5.8) pnömatik
2 x DT 10 kelepçe (5.8 + 5.8)
Püskürtme cihazı (sıvı yapışmaz için)
KENAR YAPIŞTIRMA PARÇASI (her iki taraf için):
1° yapıştırma ünitesi (sıcak tutkal + ön eritici) SP30 (Yüksek Eriyik + Kenar Kontrol EC 40)
2° yapıştırma ünitesi (sıcak hava ile ön eritici) Hava Kuvveti Sistemi
Kenar basınç bölgesi (CN kontrollü). Rulolar için kenar magazini (N° 6 kat)
Kırpma ünitesi IT 90-X (Kw 0,65 x 2) 28m/dak. 0 - 25°.
Ön frezeleme ünitesi RS 10 (2 x Kw 2)
Çok profilli düzeltme ünitesi (CN kontrollü) RF 40 (Kw 1 x 2) 0 - 25°
Çok fonksiyonlu ünite (yarıçap frezeleme ve kalıplama ünitesi) AR 80 (Kw 0, 65 x 2) 25m/dak ROTAX. Revolver 8+8 direk (maks. 25 m/dak)
Lrjdpfx Aou Rc Anodlsn
Otomatik matkap ucu değişimli motorlar (aletler)
Çok profilli sıyırıcı ünitesi (CN kontrollü) RB 40 (çok profilli)
RC 20 düz sıyırıcı ünitesi + püskürtme ünitesi (parlatma sıvısı için)
SZ 30 parlatma ünitesi (Kw 0,37 x 2)
Küçük ilan
Espelkamp
2.531 km
Lazer kesim makinesi
SAN LaserSA-AT4020 6kW
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, kontrol tipi: PLC kontrollü, otomasyon derecesi: yarı otomatik, tahrik tipi: elektrikli, kontrolör üreticisi: Siemens, lazer tipi: fiber lazer, lazer kaynak üreticisi: Max Photonics, lazer kaynağı modeli: MAX 6kW mit CE, lazer gücü: 12.000 W, sac kalınlığı (maks.): 30 mm, maks. sac kalınlığı çelik: 30 mm, paslanmaz çelik sac kalınlığı (maks.): 25 mm, alüminyum sac kalınlığı (maks.): 15 mm, pirinç sac kalınlığı (maks.): 15 mm, bakır sac kalınlığı (maks.): 15 mm, masa uzunluğu: 4.000 mm, masa genişliği: 2.000 mm, çalışma uzunluğu: 4.000 mm, çalışma genişliği: 2.000 mm, konumlandırma hassasiyeti: 0,3 mm, tekrar doğruluğu: 0,3 mm, giriş voltajı: 380 V, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, soğutma tipi: su, basınçlı hava bağlantısı: 8 bar, toplam ağırlık: 8.500 kg, toplam uzunluk: 10.500 mm, toplam genişlik: 4.200 mm, garanti süresi: 12 aylar, Donanım: CE işareti, acil durdurma, dokümantasyon / kılavuz, duman emişi, emniyet ışık bariyeri, merkezi yağlama sistemi, soğutma ünitesi, toz emişi, Fiber Laser Cutting Machine 4020, 6 kW – Overview
Safety & Protection
Completely enclosed metal protective cabin with radiation-proof doors and windows.
Environmentally friendly and safe for operators.
Work Platform
Upper and lower parallel platform:
Ledpfxoy R I N Ij Adlsrn
Front end: Laser cutting.
Rear end: Loading and unloading.
No mutual interference → increased work efficiency.
Machine Structure
10 kW bed structure:
Time-segmented, sectional dust extraction.
Efficient heat dissipation, resistant to thermal influences.
Industrial auxiliary equipment: Air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life.
Precision Guarantee:
Bed processed by a large gantry milling machine.
Industrial-grade guide rails, gears, ball screw drives.
Fully servo-controlled, double-sided dual drive.
High industrial quality and precision.
German assembly technology:
Precision calibration using laser interferometers
Fine craftsmanship, easier maintenance.
Control & Software
FSCUT 6000 control system (included).
FSCUT software package:
Market-standard, safe, and user-friendly software.
Supports intelligent networking.
Professional nesting software: CypNest (included).
Core Components
Laser cutting head BOCI BLT442
MAX 6 kW laser source, CE certified
HANLI 12 kW water chiller
TAIWAN DTX 30+20+20 linear guides
TAIWAN JT frame
Germany Techmach reducer
2 cameras
BOCHU servo motor
Felton proportional valve
SCHNEIDER electronic components
Triple air inlet: nitrogen, oxygen, air
Automatic oil lubrication system
Accessories
30 protective lenses, 30 nozzles, tool box.
Optional: ARS-30HP-XF-1, 6 MPA air compressor, 7.5 kW dust collector.
Sizin için aramayı kolaylaştırıyoruz: "ares mg1200"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay























































































































































































































































































