Kullanılmış Fliegl Sds 390 Plateau Mit Teleskopierung Für Baustahlmattentransport satın al (11.712)

Koşul: yeni, makine/araç numarası: 637ca014c140e4e48dc3231a0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 33.300 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 31 m³, toplam uzunluk: 9.090 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.110 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis Semitrailer Tipper Fine-grained steel welded construction, lightweight basic design, fifth wheel plate with interchangeable 2" kingpin Curved front panel patented 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating device Wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holders, stone-repellent surface With anti-spray splash guards only on rearmost axle Tarp pole with holder Tow hook at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension 1st axle is an automatic lift axle, including forced lowering and start-assist function Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easier servicing Hjdpfx Aloi Rivdjben Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front (no connecting cable) Attention: The trailer may only be towed by tractors which guarantee the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and Tyres 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the tractor dashboard via EBS, no truck installation (must be pre-equipped in the truck, only for standard tyres) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to blinking indicators “flashing side markers” 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm (no hose connection) Operation: hydraulically via PTO on the truck Body/Tipper Steel round body in “Stone Master Design” made of highly wear-resistant HB 400/450 steel. Sloped front wall with exterior hydraulic cylinder mounting. Internal front-wall entry access. Greenline – conical and aerodynamic body design Shovel and broom holder outside on the front wall Tailgate Membrane tailgate – pendulum flap with double-joint hinges, externally mounted with double hook locking. 2 clamping screws with wing locks at the bottom left/right. Side walls continuously 4 mm thick, floor 4/5 mm thick. Wear- and weight-optimized construction. Standing platform with steps, connector plate for air/electric and brakes with large clearance for optimal operability Roll tarp, can be stored on passenger side, central lock on driver side Registration/Signage Country of registration: Germany Type approval per EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-row number plate holder Warning panel in accordance with ECE - 70 Contour marking with reflective tape according to ECE R 048, white on sides & red at the rear Paintwork Frame: DB 7350 Novagrau "10-year anti-perforation warranty" Landing gear legs: black coated Body: RAL of choice, single color Roll tarp: RAL 7035 light grey

Koşul: yeni, makine/araç numarası: 2f960ff7c44de83fd060ec5df, boş ağırlık: 6.750 kg, azami yük ağırlığı: 32.250 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.670 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without load compensation Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard brackets, stone-resistant surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-measured: reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded line routing for easier service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle - driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (prerequisite must be met in the truck; only for standard tires). Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked to indicator "flashing side marker lights" 2 x 7-pin, non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel box body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Inside with ladder on front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane tailgate Internal width at bottom approx. 1,440 mm Hsdei Rizfjpfx Albjn Aluminum tailgate, pendulum-mounted with "double-joint hinge" and with two-leaf door split 1/2 to 1/2, top with swing arm, with one grain chute per door Standing platform with access, connector plate for air/electrics and brakes with large clearance for optimum operability Roll tarp, to be stowed on FR-right, with central locking on FR-left Country of registration / plates Germany Type approval according to EC 2007/46 Superstructure stability according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL on request, single color Roll tarp: RAL 7035 light grey

Koşul: yeni, makine/araç numarası: aaa375d3c15c697ac80fb51f9, boş ağırlık: 7.900 kg, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.950 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis semi-trailer tipper Fine-grain steel welded construction, lightweight design, with slight camber, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation Hedpfji Rizqsx Alben Wheel chocks with holder Foldable underrun protection Half-shell fenders Integrated fender bracket, surface designed to repel stones Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year guarantee against corrosion Brake System 2-line compressed air braking system, color-coded piping for easy maintenance Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With raise/lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, displayed on the towing vehicle's display via EBS, not installed on truck (the technical requirements for this must be present in the truck. Only applies to basic tires). Electrics 24 Volt, multi-chamber lights, yellow LED side lighting Yellow LED side lighting synchronized with indicator "flashing side markers" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping body Steel trough made from highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mounting. Foldable aluminium splash guard on front right for roll tarp. Shovel and broom holder on exterior front wall. Internal access at front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane tailgate Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf. With externally mounted rotary bar lock and mechanical lower lock Standing platform with access, connection plate for air/electrics and brake with large free space for optimal operability. Roll tarp can be stowed on the front right, with central locking on front left Country of registration/plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Chassis DB 7350 nova grey 10-year guarantee against corrosion Support legs black coated Tipping body: single color, RAL of your choice Roll tarp: RAL 7035 light grey

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2005, renk: diğer, Üretim yılı: 2005, Boş ağırlık: 4.200 kg Aks 1: sol 4-8 mm, sağ 10-10 mm Hjdpsywtctefx Albsn Aks 2: sol 10-10 mm, sağ 12-12 mm Aks 3: sol 4-8 mm, sağ 4-4 mm Römorkları istifleme imkanımız mevcuttur!

Üretim yılı: 2026, çalışma saatleri: 1 h, Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: S22EVA_07, Sergi makinesi - yeni gibi. EVA Elektrikli karınca ve forklift ile yükleme için 150 mm - 200 mm yükseltilmiş taban çerçevesi - yüksekliği ayarlanabilir Döner tabla Ø 1,500 mm Maks. Palet boyutları: 800 x 1.200 mm Maks. Yük kapasitesi: 1.500 kg Sarma yüksekliği (palet dahil) 2.200 mm Işık sensörü ile yükseklik sorgulama Frekans kontrollü döner tabla tahriki (yumuşak başlatma - başlatma/durdurma) Frekans kontrollü kaldırma arabası hızı yukarı/aşağı Sarım başlangıcında sinyal sesi ve döngü sonunda durma Hsdpfoykuhcjx Alben CE yönetmeliklerine uygun acil durdurma anahtarı Döner tabla her zaman aynı başlangıç konumunda durur Film taşıyıcı için düşmeye karşı koruma Makineyi açmak için basma düğmesi ve CE standartlarına uygun başlatma ve durdurma işlevi Ø 22 mm KONTROL PANELI ÜZERINDE AYARLANABILIR PARAMETRELER Tüm fonksiyon parametreleri ekran üzerinden ayarlanabilir F02 - Kademesiz değişken döner tabla hızı 5-12 rpm Kaldırma arabası hızı yukarı ve aşağı doğru bağımsız olarak ayarlanabilir F03 - Kaldırma arabası hızı 1,3 ila 5,4 m/dak arasında yukarı doğru F04 - Kaldırma arabası hızı 1,3 ila 5,4 m/dak arasında aşağı doğru F05 - Palet tabanındaki sarım sayısı (1 - 10 sarım) F06 - Palet başlığındaki sarım sayısı (1 - 10 sarım) F09 - Palet sarma yükseklik ayarı F62 - Film değişimi için ergonomik yükseklik KONTROL PANELINDE AYARLANABILIR SARMA PROGRAMLARI 1 depolanabilir ambalaj programı F01 - 1 - Çapraz sarma (yukarı/aşağı) F01 - 2 - Basit sarma (sadece yukarı veya sadece aşağı) F01 - 3 - Manuel sarım F12 - Kayıtlı bir yüksekliğe sarma (ışık sensörü kapalıyken) F29 - Kenar koruması uygulamak için Softstart döngüsü Keskin palet kenarlarında film yırtılmalarını azaltmak için yumuşak başlangıç MEKANIK FRENLI FILM TAŞIYICI TIPI "FM" film taşıyıcısı üzerinde manuel olarak ayarlanabilen fren silindiri aracılığıyla Film özellikleri Maks. Dış çap Ø 250 mm - Çekirdek Ø76mm - Yükseklik = 500 mm Standart bağlantı değerleri: 230 V - 1L+N+PE - 50 HZ Toplam güç: 1,2 kW / 6A Diğer sistemler stoktan hemen temin edilebilir.

Üretim yılı: 2026, çalışma saatleri: 2 h, Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: S22EVA_03, Sergi makinesi - yeni gibi. EVA pikap / taban çerçevesi yükseltilmiş / Ø 1.500 mm Maksimum palet boyutları: 800 x 1.200 mm Maksimum yük kapasitesi: 1.500 kg sarma yüksekliği (palet dahil) 2.200 mm 150mm - 200mm yükseltilmiş taban çerçevesi, elektrikli karınca ile şarj için - ayarlanabilir ışık sensörü ile yükseklik sorgulama Frekans kontrollü pikap sürücüsü (yumuşak başlatma - başlat/durdur) Frekans kontrollü kaldırma arabası hızı yukarı/aşağı Sarma başlangıcında ve çevrim sonunda durmada sinyal tonu CE yönetmeliklerine uygun acil durdurma anahtarı Pikabın durma noktası her zaman aynı başlangıç pozisyonundadır Hodeykud Depfx Alben folyo taşıyıcı için düşme koruması Makineyi açmak ve CE standartlarına uygun olarak başlatma ve durdurma fonksiyonunu sağlayan basmalı düğme Ø 22 mm KONTROL PANELİNDE AYARLANABİLİR PARAMETRELER Tüm fonksiyon parametreleri ekran üzerinden ayarlanabilir F02 - Sürekli ayarlanabilir pikap hızı 5-12 rpm Kaldırma arabasının hızı yukarı ve aşağı birbirinden bağımsız olarak ayarlanabilir F03 - Kaldırma arabası hızının 1,3 ila 5,4 m/dak'ya çıkması F04 - Kaldırma arabası hızının 1,3 m/dak'dan 5,4 m/dak'ya aşağı doğru indirilmesi F05 - Palet ayağındaki sarım sayısı (1 - 10 sarım) F06 - Palet başındaki sarım sayısı (1 - 10 sarım) F09 - Palet sarma yüksekliğinin ayarlanması F62 - Film değişiklikleri için ergonomik yükseklik KONTROL PANELİNDE AYARLANABİLİR SARMA PROGRAMLARI 1 saklanabilir sarma programı F01 - 1 - Çapraz sarma (yukarı/aşağı) F01 - 2 - Tek sarım (sadece yukarı veya sadece aşağı) F01 - 3 - manuel kurmalı F12 - Kayıtlı bir yüksekliğe sarma (ışık sensörü kapalıyken) F29 - Kenar koruma uygulaması için yumuşak başlatma çevrimi Keskin palet kenarlarındaki film yırtılmalarını azaltmak için yumuşak başlangıç FİLM TAŞIYICI TİPİ “FM” MEKANİK FRENLİ film taşıyıcısındaki manuel olarak ayarlanabilir fren silindiri aracılığıyla Film özellikleri Maksimum dış çap Ø 250 mm - çekirdek Ø76mm - yükseklik = 500 mm Standart bağlantı değerleri: 230 V - 1L+N+PE - 50 HZ Toplam güç: 1,2 kW / 6A Ek sistemler stoklarımızdan hemen temin edilebilir.

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front Hjdpfxoi Ri Rvj Albon 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: 1acf251a278ec5cde4067a7b1, boş ağırlık: 5.800 kg, azami yük ağırlığı: 22.200 kg, toplam ağırlık: 28.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Outer frame slightly inclined, new version with load-lock profile for lashing straps 24 t, 2-speed landing gear, operated from one side, straight base, without compensating mechanism Free landing gear corner dimension or rear swing clearance approx. 1920 mm 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle Hsdpfxokv Uvze Albjn 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included) Axles & Suspension Drum brake axles, as per manufacturer’s choice Axles/chassis laser-measured to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easier servicing Spring-applied parking brake Duomatic coupling front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that can guarantee the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and tyres 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connection cable Floor Approx. 30 mm thick phenolic resin plywood for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front panel / corner posts front 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts steel in volume version Country of registration / plates Germany With DEKRA inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Paint Frame hot-dip galvanized including passivation, 15-year anti-perforation warranty Front wall aluminium Attention! Archive images shown!

Koşul: yeni, makine/araç numarası: 71cc13750cef13b72f7a55abe, boş ağırlık: 5.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Tipper Fine-grain steel welded construction with lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall, patented 24t two-speed landing gear, single-sided operation, with straight lower section, without push-rod compensation 2 wheel chocks with bracket Hsdpfx Aei Ri Efelbsn Underride protection, foldable Half-shell mudguards Integrated mudguard holder with stone-repellent surface Anti-spray mud flaps on rearmost axle only 1 tarp pole with bracket 2 towing hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by pressing brake three times (start assist functions up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air brake system, color-coded pipelines for easy service Spring-loaded parking brake 2 anti-mix coupling heads at front, without connection line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise and lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, make per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at front 2 white/red contour marking lights at rear 2 x 7-pin anti-mix sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HD coupling nut, fixed part, NW 48 mm (without hose connection) Operated hydraulically via vehicle PTO Body Aluminium box body made from high-quality, wear-resistant material; front wall 5 mm thick, external side walls from 30 mm hollow section profiles, expertly welded, with spill-repellent top rail profile. Internal ladder on front wall (not with Cramaro option). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate pendulum-mounted with double hinge and split 1/2 to 1/2 with top swing arm, with one grain slide per door. Tailgate with rubber seal. Note: Heat-resistant up to max. 170°C! Floor throughout 6 mm thick Standing platform with access steps, connector plate for air/electrics and brake with ample space for ease of use Roll tarp to be stowed on right side (FR-right) with central locking on left side (FR-left) Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material damage and corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within the allowable axle/kingpin/load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Country of Registration / Signs Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity markings with reflective tape according to ECE R 048, white side and red rear Paintwork Frame DB 7350 Novagr

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Hsdpfx Alei Ri Iaeben Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights Hodpfji Ri Ryjx Alben 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: c13a96854ea37997845c1bf36, boş ağırlık: 6.860 kg, azami yük ağırlığı: 28.140 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235/75 17,5,

Koşul: yeni, makine/araç numarası: 92df8e9d6c187f34b20298f39, boş ağırlık: 4.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, saddle plate with replaceable 2" kingpin Patented curved front end Central telescopic support leg, uncoupling with load not possible; when uncoupled, vehicle must be positioned inclined towards the rear. 2 wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard mount, stone-repellent surface With anti-spray splash guards on the last axle only 1 tarpaulin bar with holder 2 towing hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, actuated by braking three times (traction aid functional up to 30% axle load exceedance and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS electronic braking system, with EBS socket at the front, no connecting cable Note: The trailer must only be towed by tractors that ensure the effectiveness of ABS! With raise & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 – manufacturer at the manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck PTO Bodies Aluminum box body made of high-quality, abrasion-resistant material: front wall 5 mm thick, outer rear walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent upper frame profile. Interior has a step-up at the front wall (not in combination with Cramaro). Shovel and broom holders outside on the front wall. Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as pendulum tailgate with double-joint hinge, external mounting with double hook locking. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor seamlessly 6 mm thick Standing platform with step-up, connection plate for air/electrical and brake lines with generous clearance for optimal operability. Roll tarpaulin stows to FR-right, with central locking at FR-left Operating Information For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material degradation and rust. The stated total weight is technically possible. Depending on the cargo, the total weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving or tracking behavior due to incorrect load distribution possible.) Registration Country / Plates Germany Hjdpfx Asi Riz Rjlbon Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective tape according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Nova Grey 10 years

Koşul: yeni, makine/araç numarası: 6e7907b4000c16661fa1c8a1f, boş ağırlık: 4.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Hjdji Ri Aropfx Albon Curved front section, patented without landing gear Wheel chocks with holder Foldable underride guard Half-shell mudguards Integrated mudguard holder, stone-repellent surface Towing hook at rear Axles & suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated by activating brakes 3x (traction aid functional up to an axle overload of 30% and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake system 2-line compressed air brake system, color-coded piping for easy service. Spring-loaded parking brake 2 anti-swap couplings at the front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that guarantee effective ABS functionality! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, manufacturer at the discretion of the builder Polished aluminum rims, manufacturer at the builder’s discretion Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK threaded coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant alloy, front wall 5 mm thick, outer walls made of 30 mm hollow chamber profiles, neatly welded, outer upper edge with bulk material-repelling profile. Interior with access ladder at the front wall (not in combination with Cramaro). Shovel and broom holder on the outside of front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate as pendulum flap with double-joint hinge, mounted outside with 2-hook locking system. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 5 mm thick floor, Brinell 110. Note! Only for transporting sand, chippings, and round gravel with a max. grain size up to 20 mm! Warranty does not apply to any other goods! Standing platform with access, connecting plate for air/electrical and brakes with ample space for optimal operation. Roll-up tarpaulin, stashable to FR-right, with central locking on FR-left Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent material-induced corrosion. The specified gross vehicle weight is technically possible; depending on load, permissible axle, support, and fifth wheel loads may restrict achievable total weight. (Poor driving and trailing performance possible due to incorrect load distribution) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With Dekra inspection and report (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red on the rear Paintwork Frame DB 7350 Nova Grey Body R

Koşul: yeni, makine/araç numarası: f044065451f6d849ee7a5b9f8, boş ağırlık: 5 kg, azami yük ağırlığı: 29 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385 / 65 r 22,5, Further Information Chassis for Semitrailer, Freight Forwarder Specification Reinforced steel welded construction, only 2 longitudinal beams as double-T profiles with steel/chequer plate in between the beams, fifth wheel plate with replaceable 2'' kingpin. Protective cover for tail lights. 1 steel toolbox recessed between the longitudinal beams 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer's choice 24 t 2-speed landing gear, single-sided operation, with straight base, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half shell mudguards With anti-spray flaps compliant with EU regulations 1 spare wheel holder for 1 spare wheel, including wheel fastening kit 8 timber post cradles as per manufacturer's specification, bolted to the frame, each with 2 telescopic wooden stakes extendable from 1,800 to 2,800 mm, 7 t per pair. Axles & Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with raise & lower valve, safety cable on axles 1st axle automatic lift axle, including forced lowering and start assist, operated via 3x braking (start assist functions up to 30% axle load exceedance and up to a max speed of 25 km/h) Axle spacing offset (Combined Transport) up to 44 t gross combination weight Wheels and Tyres 385 / 65 R 22.5 Manufacturer’s choice Steel rims, factory silver Braking System Dual-line air pressure brake system Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display in the driver’s cab; truck must be pre-equipped accordingly, not installed on truck (not an approved scale) 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connector cable Attention: This trailer may only be towed by tractors that guarantee correct ABS performance! Hsdpfoi Rivwsx Albjn Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connector cable Front Bulkhead/Corner Posts Steel/mesh front bulkhead, approx. 2,300 mm high, bolted to the frame Approval / Plates Country of Registration: Germany Approval as per EC 2007/46 Prepared for single-line number plate holder Contour marking with reflective tape as per ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Landing legs coated black Bulkhead hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: abc6276e1749f9dddc494eb32, boş ağırlık: 4.900 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Hodpfx Alji Ri H Ijbsn Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder contour marking with reflective tape per ECE R 048, white sides and red rear

Koşul: yeni, makine/araç numarası: 074630ca1b8dc2d710f82c15a, boş ağırlık: 3.980 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, kingpin plate with interchangeable 2-inch kingpin Patented curved front wall Without landing leg Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation with triple brake application (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years’ warranty against corrosion Brake System 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lowering valve Vehicle driving stability system Wheels and Tyres 385/65 R22.5, make at manufacturer’s discretion Polished aluminum rim, make at manufacturer’s discretion Electrics 24 volt, multi-chamber lights, LED side marker lights (amber) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via PTO on truck Body Aluminum box-body, made of high-quality, wear-resistant material; front wall 5 mm thick, with external end walls made of 30 mm hollow chamber profiles, precisely welded, with top rail profile deflecting loose material. Inside: ladder/access at front wall (not for use with Cramaro). External holder for shovel and broom at the front wall. Greenline – conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double joint hinge, mounted externally with double hook locking Rear wall with rubber seal (Note: Heat resistant up to 170°C max!) Continuous floor 5 mm thick, Brinell hardness 110 Note: Only suitable for the transport of sand, gravel, and round gravel with max. grain size 20 mm! All other transported goods are excluded from warranty! Hodpfx Alsi Ri H Sobjn Standing platform with access, connection plate for air/electric and brake with large clearance for optimal operation Sliding tarp, single-sided folding to FR-right, with central locking in FR-left Operating Instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated total weight is technically possible; depending on the load, the total weight may not be achievable due to permitted axle, support, and fifth wheel loads. (Poor driving and tracking behavior possible with incorrect load distribution.) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 Service hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Body: R

Koşul: yeni, makine/araç numarası: 45d76d32267904923b7adcdea, boş ağırlık: 4.980 kg, azami yük ağırlığı: 30.020 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis and Semi-Trailer Tipper Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front bulkhead 24 t, 2-speed landing gear, operated from one side, with straight lower part, without thrust compensation Wheel chocks with holder Collapsible underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles and Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated after 3x braking (starting aid functions up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Hsdpfji Ri Idox Albon Brake System 2-line compressed air brake system; color-coded line layout for easier maintenance Spring-loaded parking brake 2 interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front (no connecting cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS functionality! With raise/lower valve Vehicle stability system Wheels and Tires 385/65 R22.5—manufacturer at the manufacturer's discretion Polished aluminum wheel rims—manufacturer at the manufacturer's discretion Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, no connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body High-quality, abrasion-resistant aluminum box body, front wall 5 mm thick, external hollow-chamber side walls, 30 mm profile, precisely welded, with spill-repellent upper rail profile. Internal access ladder at the front wall (not in combination with Cramaro). Shovel and broom holder outside on the front wall Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as swinging gate with double-joint hinge, external with double hook lock Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor fully 5 mm thick, Brinell hardness 110 Note! Only suitable for transport of sand, grit, and gravel with max. grain size up to 20 mm! Any other loads are excluded from warranty! Standing platform with ladder, connection plate for air/electrics and brake with large clearance for optimum operability Roll tarp can be parked on RH side with central locking on LH side Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with hard-chrome plated piston rod to prevent corrosion due to material contact. The specified gross weight is technically feasible; depending on the cargo, the gross weight may not be achievable due to permissible axle/support/fifth wheel loads (poor stability or tracking behavior possible due to incorrect load distribution) Revolution Link: Revolution Link Review: Country of Registration / License Plates Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R0

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! Hedoi Ri Hvepfx Alben 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Koşul: yeni, makine/araç numarası: 357314e4e176f8758d11ba42b, boş ağırlık: 4.500 kg, azami yük ağırlığı: 30.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. Hjdpfx Alei Ri R Iebsn spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder contour marking with reflective tape per ECE R 048, white sides and red rear

Koşul: yeni, makine/araç numarası: 59ade5d1599dcdee29033ac46, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Fifth Wheel Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Insert bar for aluminum ramps across the entire width Frame in reinforced version for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm for lashing strap attachment 10 pairs of lashing pins flush-mounted on top/outside of the outer frame, each rated at 10 t 24 t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight mounting plate, with thrust compensation Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter-circle mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Pair of ferry lashing points, marked in yellow 1 spare wheel holder for 1 single wheel, with wheel fixing kit 2 plastic toolboxes, with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, frontmost position as fold-down lock, countersunk 10 pairs of stake pockets recessed in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets centrally recessed in the floor, 70 x 40 mm internal dimensions 2 cross lashing/stake rails inset into floor across the full width up to the outer frame (max. usable internal width between the outer most removable stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, both top and bottom, distance between upper and lower approx. 60 mm (of the round steel). Lower part finished with angle sheet, half open downwards. For lashing and inserting stakes 80 x 80; arrangement: positions 2 and 4 according to Fliegl data sheet 20 removable stakes, hot-dip galvanized Note: Stake pockets/inset stakes are not designed for sole load securing of long material, pipes etc. without lashing Storage space for aluminum drive-on ramps, ramps can be inserted from the rear 3 pairs of fold-down lashing eyes 10 t in the outer frame (1x in front of front wall and 2x in the rear area) Axles & Suspension SAF disc brake axles Axles/chassis laser-measured — reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, operated by 3x brakes (traction aid operates up to 30% axle overload and a max speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Vehicle with inclined position) Braking system 2-line compressed air braking system Colored line routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Hodpjld Ihlofx Albsn With raise & lower valve 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Observe total height, overheight at customer’s risk) Ride height in conjunction with lift axle, with lifted axle the loading or total height increases by 50 mm (for Mega Flex only at low ride height/coupling height) Vehicle - driving stability system Wheels and tires 435/50 R19.5, make at man

Koşul: ikinci el, makine/araç numarası: WFDFLT23861001990, boş ağırlık: 4.900 kg, azami yük ağırlığı: 33.100 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam uzunluk: 9.800 mm, toplam genişlik: 2.550 mm, lastik boyutu: 265/70 r19,5, renk: kırmızı, Further information Former exhibition vehicle from 2006 – was used internally and therefore shows signs of use/wear! Side underrun protection: aluminium, from king pin to start of side underrun protection 2,600 mm Rear underrun protection: Chassis colour and flush with the end of the chassis, positioned as far inwards as possible Wheel chocks: 2 units with brackets Hedpfxei Ri Hye Albsn Bump stops: 2 steel buffers Paint: sandblasted base, 2-component acrylic paint Rims: factory silver Inspection: with DEKRA approval

Koşul: yeni, makine/araç numarası: 0fe2184cda24503447c582a1e, boş ağırlık: 3 kg, azami yük ağırlığı: 34 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r 22,5, Further Information Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Container Mountings: 1 x 40 ft with gooseneck tunnel Transport of filled tank containers is excluded. Without rear height adjustment and without folding center supports, transport of containers without tunnel is not possible. Container guides at the front, plug-in type Hedpfx Aoi Ri Ayslbon 24 t, 2-speed landing gear, single-sided operation, with straight base, without load compensation Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Half-shell mudguards With anti-spray mud flaps according to EC Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing for combined transport, up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced-lowering and start-off aid, activation via 3x brake (start-off aid functions up to axle load overrun of 30% and up to a max. speed of 25 km/h) Brake System 2-line compressed air braking system, color-coded line routing for easy servicing. Spring-actuated parking brake 2 foolproof coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable Attention: The trailer must only be towed by tractor units capable of ensuring ABS functionality! With lift & lower valve Vehicle Stability Control System Axle load detection via EBS CAN-bus signal, for display in driver’s cab (truck must be pre-equipped, not installed on vehicle, not a calibrated scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights and brake lights in LED, lateral yellow LED lighting (Note: certain tractor units may display false error messages even if function is ensured) 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connection cable LED work lights on both sides, switched via reversing light Additional LED work light at rear, switched via reversing light Operating Instructions The specified gross weight is technically possible. Depending on cargo, the gross weight may not be achievable while complying with permissible axle, support, and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Special permit required if overall train length exceeds 16,500 mm. Note: Transport of filled tank containers is excluded! Country of Registration / Signs Germany With Dekra inspection and report (in accordance with §13 EC-FGV) Prepared for single-line license plate holder Warning plate according to ECE - 70 Contour markings with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame DB 7350 Nova Grey, 10-year corrosion warranty Support feet black coated Without pallet box paint Note: Archive images!

Koşul: yeni, makine/araç numarası: 3703d600260244d5f159f51e4, boş ağırlık: 4 kg, azami yük ağırlığı: 33 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Included. Rear extension retracted: 1 x 20 ft flush with rear, note: low fifth wheel load Rear extension extended 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang without rear height adjustment and without folding centre supports, transport of containers without tunnel not possible. Plug adapter for front locking, for securing containers without tunnel from below, with bracket for when not in use Rear extension mounted on rollers, operated by hand crank 24 t, 2-speed landing gear, single-sided operation, with straight base, without compensating rod 2 wheel chocks with holder Side underrun protection aluminium Rear underrun protection galvanised steel Rear underrun protection extendable for 45 ft containers Half-shell mudguards included with anti-spray flaps according to EU regulations Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned for reduced tyre wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation by pressing brakes 3x (starting aid functions up to 30% axle overload and up to a max. speed of 25 km/h) Braking System 2-line compressed air braking system Coloured hose routing for easy maintenance. 200 spring-actuated parking brake 2 foolproof coupling heads at the front, without connecting hose EBS, Electronic Braking System with EBS socket at the front, without connection cable Attention: The trailer must only be towed by towing vehicles which ensure ABS efficacy! with lift & lower valve Vehicle - Driving Stability System Axle load detection via EBS CANbus signal, for display in the driver’s cab, truck must be prepared accordingly, not installed in truck (not a calibrated scale) Wheels and Tyres 385/55 R22.5, make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lamps, rear and brake lights in LED, side yellow LED lighting (Note: With certain towing vehicles, false diagnostics may occur, though the function is assured) 2 white position lamps at the front 2 white/red lane marking lamps at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Operating Instructions Attention: Transportation of filled tank containers is excluded! When transporting 45 ft containers with short tunnel, with or without front extension, the permitted system length from kingpin to vehicle rear and the total train length of 16,500 mm is exceeded! Rear underrun protection must be extended manually! An exemption according to § 70 StVZo is required! Hedpfsi Ri Eqox Alben Country of Registration/Plates Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 Service Hotline prepared for single-line number plate holder 390 contour marking with reflective tape according to ECE R 048, white on sides and red at rear Coating Frame hot-dip galvanised incl. passivation 15-year anti-corrosion warranty Support feet black coated Note: Archive photos!

Koşul: yeni, makine/araç numarası: d73a4869e108da5fdd6e55526, boş ağırlık: 4 kg, azami yük ağırlığı: 33 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container Mountings: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with the rear Center telescope 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel Center telescope 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel, overhanging at the rear Hsdpfsi Ri E Asx Albon Center telescope 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Center telescope as interlocking central tube frame with bolt lock without rear height adjustment and without foldable intermediate supports, no transport of containers without tunnel possible. 2 container guides, incl. mounting plate for electrics, air and brake connections (connections mounted upwards) Plug adapter for front locking, to secure containers without tunnel from below, with bracket for non-use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, two-speed landing gear, single-sided operation, with straight base, without push compensation 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection galvanized steel Rear underrun protection extendable for 45 ft container Half-shell mudguards with anti-spray splash flaps according to EU regulations Rear bumper protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, operation by braking 3 times (traction assistance functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system, color-coded piping for easy service Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 foolproof coupling heads front, without connecting line EBS, electronic braking system with EBS socket front, without connecting cable Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal for display in the driver’s cab, truck must be suitably prepared, no truck installation (not a calibrated scale) Wheels and Tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, 4 x 3 chamber tail lights + 1 round reversing light + 1 round rear fog light, side yellow LED lighting 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets front, no connecting cable Operating Instructions When transporting 45 ft containers with short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! An exemption permit according to § 70 StVZO is required! Registration / Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Conspicuity marking