Kullanılmış Max Trailer Yarı Alçak Yükleyici satın al (43.796)

Durum: yeni, makine/araç numarası: 3, boş ağırlık: 9.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 850 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: beyaz, Üretim yılı: 2022, Donanım: ABS, Brand new Ceylan low-loader semi-trailers available for immediate delivery, equipped with double electro-hydraulic ramps, widening devices, RUD lashing rings, 10m platform length, 85cm deck height, also available with grating ramps, EBS, 3 axles with lifting first axle and steering third axle – warranty included. Official dealer: Interdrive S.r.l. – Parma. Todpfxshzaq Ro Ap Aoa

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.800 kg, azami yük ağırlığı: 30.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 870 mm, toplam uzunluk: 13.700 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, renk: kırmızı, römork freni: frenli römork, Üretim yılı: 2022, Donanım: ABS, hidrolik arka platform, 2022 model, kullanılmış Komodo düşük şasi 3 dingilli treyler; 1. dingil kaldırılabilir, 3. dingil yönlendirmeli, EBS; 10 m uzunluğunda, yerden yüksekliği 87 cm olan alçak platform; 4,0 m uzunluğunda, genişliği ayarlanabilir çift geniş ızgaralı rampa; yan genişleticiler, yan ve platformda 8 ton kapasiteli RUD kancaları; çıkarılabilir boyun tarafı yan panelleri; havalı süspansiyon; ahşap ve saç karışımı platform; yan tarafta alet kutusu, boyunda büyük bir depolama kutusu, çift hızlı ayaklar; çok iyi durumda, 28.02.2026'ya kadar muayeneli. Bayi: INTERDRIVE SRL-PARMA. Tedpoyfwdijfx Ap Aea

Durum: yeni, makine/araç numarası: 1, boş ağırlık: 10.200 kg, azami yük ağırlığı: 28.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 850 mm, süspansiyon: hava, lastik boyutu: 245.70 r 17.5, renk: koyu kırmızı, Üretim yılı: 2021, Donanım: ABS, Brand new CEYLAN low-loader SEMI-TRAILER, 3 axles with 1st axle liftable and 3rd axle steered, ABS, lower deck measuring 10m in length x 85cm deck height from the ground, total length 13.70m, side stanchions, lateral extensions, 10-ton RUD lashing rings each, full-width double electro-hydraulic ramps, prearrangement for electric winch, WARRANTY - IMMEDIATE AVAILABILITY SUBJECT TO PRIOR SALE, INTERDRIVE SRL - PARMA Tsdpfx Apjilglno Asa

Durum: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Tsdpfx Aog Sk T Dsp Asa Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Durum: ikinci el, boş ağırlık: 6.100 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2011, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 8.250 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5, dingil mesafesi: 5.800 mm, renk: turuncu, Donanım: ABS, Kampanalı fren EBS 23.900 kg taşıma kapasitesi Hidrolik rampalar 3.000 mm'ye kadar genişletilebilir BPW akslar Yükleme alanı uzunluğu 2.550 mm / 3.000 mm Hatalar için değişiklik hakkı saklıdır. Todpfx Apexu Iylo Aoa

Durum: ikinci el, boş ağırlık: 2.600 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/1993, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.000 mm, yükleme alanı hacmi: 12 m³, lastik boyutu: 205/65 R17,5, dingil mesafesi: 990 mm, Colour: orange/silver Drum brake Payload: 7,400 kg Leaf suspension Tsdpfx Ajtr Tzdop Aoa Side walls: 600 mm + 400 mm extension BPW axles Lashing rings Errors and omissions excepted

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 1.700 kg, azami yük ağırlığı: 4.800 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2015, yükleme alanı uzunluğu: 4.030 mm, yükleme alanı genişliği: 2.000 mm, Üretim yılı: 2015, frenli römork taşıma kapasitesi: 4.800 kg, Donanım: ABS, hidrolik arka platform, Humbaur HS 654020 BS, Makine Taşıma Römorku. Römork aşağıdaki donanımlara sahiptir: Tedpow Sfp Hofx Ap Aoa Basınçlı hava freni ve ABS. Yükleme platformu bir krank (kol) ile eğilebilir. Yükleme rampaları, araç genişliğine bağlı olarak kaydırılabilir. Ekskavatörler, iş makineleri ve dört tekerlekli forkliftler için idealdir. Farklı bir sisteme geçtiğimiz için satılmaktadır. Dilediğiniz zaman yerinde görülebilir. Römork 11.03.2025 tarihinde yeni muayeneden geçirilmiş olup hemen kullanıma hazırdır.

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2015, Bağlı yük: 160kVA, uzunluk: 8328mm, genişlik: 2768mm, yükseklik: 3665mm, ağırlık: 9,5t, belgelerle birlikte. Tedpfx Aolnmv Dep Aoa

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: NP9LDR3L0KN187004, azami yük ağırlığı: 45.000 kg, Üretim yılı: 2022, Lider Lowbed Düşük Yataklı Treyler, 2022 model, Tip LDR3L. Ağır taşımacılık için sağlam ve güvenilir römork, çok iyi durumda. Teknik Bilgiler Tjdpfxexb Ddtj Ap Aoa Üretici: Lider Tip: LDR3L Üretim Yılı: 2022 VIN: NP9LDR3L0KN187004 Azami toplam ağırlık: 45.000 kg King pin yükü: 17.000 kg Aks yükleri: 3 × 9.000 kg Toplam aks yükü: 28.000 kg

Durum: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° Tedpfx Ajy Auhusp Aea * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Durum: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: Tsdpfx Aey Aufmjp Aja * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Durum: yeni, boş ağırlık: 120 kg, azami yük ağırlığı: 630 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.010 mm, yükleme alanı genişliği: 1.060 mm, yükleme alanı yüksekliği: 700 mm, lastik boyutu: 155/70R13, Small and maneuverable car trailer from the manufacturer TEMARED. The open-box trailer ECO2010KIPP is ideal for private transport purposes and small loads. Garden waste, small furniture—anything you might need for personal or small business use. The trailer can be set upright and the tow bar can be folded down for easier storage. Standard equipment includes a jockey wheel, side extension panels, flat tarpaulin, fasteners, galvanized side walls, and a foldable V-drawbar. This model is also available in various versions, for example, as a trailer with lid or tarpaulin superstructure. Tjdpfeuhl Rtox Ap Aja We also offer trailer accessories such as tarpaulin and frame, drawbar box, and rear supports.

Durum: yeni, boş ağırlık: 300 kg, azami yük ağırlığı: 1.700 kg, toplam ağırlık: 2.000 kg, yükleme alanı uzunluğu: 3.010 mm, yükleme alanı genişliği: 1.510 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 155/80R13, Braked tandem low loader from manufacturer ANSSEMS, model GTT2000, 301x151 cm. The Anssems box trailer with brakes comes as standard with aluminium side walls, recessed locks, external lashing eyes, profile rails for mounting accessories or securing cargo, jockey wheel and a V-drawbar. Todpfxjrx Spxj Ap Aea We also offer a wide range of affordable accessories for Anssems car trailers such as tarpaulin and frame, flat cover, mesh hooks, welded mesh extension, side wall extension, rear support legs, toolbox, lashing straps, and anti-theft device.

Durum: yeni, boş ağırlık: 410 kg, azami yük ağırlığı: 2.090 kg, toplam ağırlık: 2.500 kg, yükleme alanı uzunluğu: 3.010 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 185/70R13, Robust braked low-loader trailer with tandem axle from manufacturer ANSSEMS, model BSX2500 301x150. Tedpfxorz Rydj Ap Aoa The Anssems box trailer with brake comes as standard with aluminium side panels, internal locks, external lashing eyes, profile channels for attaching accessories or securing loads, a very robust welded steel frame, side railing, front rack, front flap, pull-out supports for the tailgate, jockey wheel, and a V-drawbar. We also offer accessories for Anssems car trailers, such as tarpaulin and frame, flat tarpaulin, net hooks, mesh side extensions, side extension boards, rear prop kit, toolbox, lashing eyes, straps, and lock.

Durum: yeni, boş ağırlık: 250 kg, azami yük ağırlığı: 1.250 kg, toplam ağırlık: 1.500 kg, yükleme alanı uzunluğu: 3.010 mm, yükleme alanı genişliği: 1.260 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 145/80R13, Braked low loader tandem trailer from manufacturer ANSSEMS, model GTT1500 301x126. As standard equipment, the Anssems box trailer with brake features aluminium side panels, internal locks, external lashing eyes, profile channels for accessory or load securing attachment, jockey wheel, and a V-drawbar. We also offer a wide range of affordable accessories for Anssems car trailers, such as tarpaulin and frame, flat tarpaulin, net hooks, mesh extension sides, side wall extensions, support leg kits, toolbox, lashing straps, and anti-theft devices. Todjq Slqtjpfx Ap Aoa

Durum: yeni, boş ağırlık: 120 kg, azami yük ağırlığı: 630 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.010 mm, yükleme alanı genişliği: 1.060 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 155/70R13, Compact and manoeuvrable passenger car trailer from the manufacturer TEMARED. The open box trailer ECO2010KIPP is ideal for private transport needs and small loads. Garden waste, small furniture—anything you may need to transport privately or for a small business. The trailer can be stored upright and the drawbar can be folded down for easier storage. Tjdpfxsq Sly Uo Ap Aoa Standard equipment for this steel trailer includes a jockey wheel, locks, galvanised side panels, and a foldable V-drawbar. This model is also available in various versions, such as with a lid or as a tarpaulin trailer. We also offer trailer accessories such as side extensions, tarpaulin and frame sets, flat tarpaulins, drawbar boxes, and rear supports.

Durum: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Tedpfx Aoyvnfgep Asa Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Durum: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Todsyu Eu Ijpfx Ap Aja Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member Tedsw Tgp Depfx Ap Aea * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: Tedpfoyhkqzox Ap Aea * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from the equipment - full specification upon request. Loading area: - Low-bed with central beam, extendable version, length approx. 6,750 mm - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically raisable/lowerable and detachable Rear running gear: - Rear running gear, short design, with closed outer frame and tread plate cover - Running gear with excavator recess, rear half closed to accommodate air tanks - 2 pairs of outward-folding lashing rings (LC 5,000 daN) - 1 pair of outward-folding lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Air suspension with lift and lower valve Tyres: Tedpfx Aoxf Siljp Aja - Tyres 245/70 R 17.5 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Braking system: - Wabco braking system according to EU regulations, with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red Including the following additional equipment: - 2 king pins - Galvanized steel front wall, height approx. 400 mm - Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit) - Electro-hydraulic power unit - Load manometer for axle load determination, incl. load diagram - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear - Galvanized extensions, extendable by approx. 230 mm per side - Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals) - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover - 2 pairs of WADER container pockets in the loading area, for 1 x 20' container - 1 removable galvanized intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge the pick-up hooks of the low-bed - Sand coating on the loading area as slip protection - HRM metallization (High Resistance Metallization)

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Tjdpfjw Tpq Dex Ap Aoa Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durum: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) Tjdpfx Ajyhkrrop Aja * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durum: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) Tedeu Sd U Uepfx Ap Aja * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Durum: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: * Cargo area fitted with approx. 30 mm thick hardwood flooring * 10 pairs of folding lashing rings (LC 10,000 daN) Landing Legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out. Axles and Suspension: * BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169 K Todpfxexttc As Ap Aja Electrical System: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets * Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking System: * Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel Structure: * Structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Entire steel structure automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal coating adhesion * Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver grey * Paint structure tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Including Accessories: * Cargo area with approx. 30 mm thick hardwood flooring * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connector strip * One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket * Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit) * Electro-hydraulic power unit * 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area * Load gauge for axle load determination including load chart * Lift axle on the front axle with control by TEBS E * 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm * One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction) * One shunting coupling with reinforcement attached to the rear crossmember * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)