Kullanılmış Giben Yatay Panel Testere satın al (22.936)

Durumu: yeni, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 480 mm Cutting capacity at 90°: rectangle 610 x 450 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Ljdpfx Aiefu Nbboqshf Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirements approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation. Material height sensor (automatic cut start detection) Automatic feed unit with ball screw incremental feed and automatic length compensation Sensor at the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping devices Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vise opens on both sides End piece length 100 mm Modern, freely programmable CNC control for multiple sawing jobs with various cutting lengths and quantities. Automatic feed unit 500 mm with ball screw incremental feed and automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Durumu: yeni, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL PRICE!!! 2-column double miter bandsaw K-tech DG 50/33 HA-I • 2-column miter saw • Robust, yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to miter cut, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (disinfection) • Energy-efficient and low vibration due to miter cut • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure regulator valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to material start or for series cuts begin cutting immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise Lhedpfxsfg E Hlo Aiqjf

Durumu: yeni, 90°'de kesme alanı: yuvarlak 305 mm 90°'de kesme alanı: kare 260 mm 90°'de kesme alanı: dikdörtgen 350 x 200 mm Testere şeridi uzunluğu: 3375 x 27 x 0,9 mm Bant hızı: 37 + 74 m/dak Tabla yüksekliği: 940 mm Toplam güç ihtiyacı: 1,5/1,8 kW Makine ağırlığı yaklaşık 0,61 t Alan ihtiyacı yaklaşık 1,5 x 1,75 x 1,9 m Çift açılı metal şerit testere AutoCut fonksiyonlu - 60° sola, 45° sağa açılı kesim - Bilyalı yataklı döner tabla - Yana kaydırılabilir mengene - Sağlam, geniş malzeme desteği - Otomatik soğutma Lhodpfefd Abaox Aiqjf Görüntü yarı otomatik modeli göstermektedir.

Durumu: yeni, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Lhsdpfx Ajfn Andoiqof Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirements: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, Frequency inverter, Hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: very quiet operation with minimal vibration • Hydraulically actuated vice, laterally adjustable • Guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Cutting pressure/feed regulator • Support roller (infeed side) • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast downfeed to material start or, for series cuts, commence cutting immediately 4. Stop saw band 5. Raise frame to just above the material 6. Open vice

Durumu: yeni, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangle 820 x 610 mm Saw blade length 5850 x 41 x 1.3 mm Blade speed 15 – 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.45 t Space requirements approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping takes place vertically on both the infeed and outfeed sides. From the K-tech 800 H model onward, the machine is equipped as standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines come standard with the environmentally friendly “B&S Clean Cut cutting system” with minimum quantity lubrication, reducing cleaning effort and conserving resources. CNC control A CNC controller allows for the programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Ljdpfx Aijfgyifoqohf The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” that are hydraulically operated. This ensures safe gripping and handling of materials and bundles that may deviate slightly from the ideal shape. The pusher system is a separate unit and is guided by ball-bearing linear guides, a ground rack, and a frequency-driven, robust gear motor.

Durumu: yeni, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangle 1250 x 600 mm Saw band length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirement: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (optional), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is vertical on both infeed and outfeed sides. From the K-tech 800 H onwards, the machine is equipped as standard with an additional horizontal vice. The interaction of the hydraulic saw frame lowering, material positioning, and pusher system is CNC-controlled. Lsdpfx Aijfgyigsqohf The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" featuring minimum quantity lubrication. This reduces cleaning requirements and conserves resources. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. The B&S pusher-, feed- and positioning system is equipped with "double-sided opening grippers" which are hydraulically driven. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a standalone unit guided by ball-bearing linear rails, a ground rack-and-pinion system, and a robust, frequency-controlled gear motor.

Durumu: yeni, Cutting capacity at 90 degrees, round: 255 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangle: 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space requirements: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic, GBS 255 Super VA-I CNC • Left mitre 45° automatic operation • Left mitre 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, ensuring very quiet and low-vibration cutting • Removable chip tray (for cleaning/desinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning via incremental encoder (CNC) • Top accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut • CNC control to optimize working processes: Input options for various parameters such as batch quantities and material lengths, automatic kerf calculation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g., one sawing program with multiple cut lengths Lsdpfed Iipzox Aiqshf • Automatic feeding unit (CNC) via ball screw spindle with incremental advance and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum leftover length 170 mm.

Durumu: yeni, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column twin mitre band saw for fast cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved through the new “B&S positioning system”. An intelligent NC control ensures smooth coordination between linear encoder and self-braking positioning motor, in combination with a reliable hydraulic brake and large-radius central positioning. The work table is mounted using high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control A CNC system allows programming of up to 90 cutting programs with different cut lengths, batch quantities, and mitre angles. Dual-sided clamping positioning system Ledpfx Aiofg E Hmoqohf The B&S pusher system, feed and positioning unit, is equipped with “dual-sided hydraulic clamping grippers”. This ensures secure handling and transportation of materials and bundles, even if they deviate slightly from the ideal form. The pusher system is a separate construction, guided by ball-bearing linear rails, precision ground rack, and a frequency-driven, heavy-duty geared motor.

Durumu: yeni, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total connected load 7.5 kW Machine weight approx. 5.3 t Space requirement approx. 5.75 x 4.2 x 2.75 m 2-column dual-miter band saw for fast cutting with pusher system P15 (optionally P30) Hydraulic saw frame lowering • NC controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved by the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, coupled with a reliable hydraulic brake via large-radial center positioning. Ledpfx Aiofg E Hneqjhf The work table is supported by high-quality preloaded bearings to ensure exceptionally smooth rotation. CNC control A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Dual-sided gripping positioning system The B&S pusher system, feeding and positioning system, is equipped with “dual-sided opening gripping tongs” that are hydraulically operated. This ensures secure gripping and transport of materials and bundles, even those slightly deviating from the ideal shape. The pusher system is mounted separately and guided by ball-bearing linear guides, a ground rack, and a frequency-controlled, robust geared motor.

Durumu: yeni, Cutting range at 90 degrees: round 310 mm Cutting range at 90 degrees: square 280 mm Cutting range at 90 degrees: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 18 - 100 m/min Table height 890 mm Lhsdod Iiprjpfx Aiqof Total power requirement 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Left mitre 45°, automatic operation • Left mitre 60°, semi-automatic operation (cuts without programming) • Material height probe (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Optimal access to saw, material and feed unit • Foldable safety cover • Fine adjustment of feed • Semi-automatic cutting! • CNC control to optimize workflows Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with various different cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Durumu: yeni, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibration and noise. • The chip conveyor is hydraulically driven and features adjustable speed. • All machine movements (saw frame, vice, feeder, blade guides) are supported by modern linear guides with high static and dynamic load capacities, guaranteeing very low sliding friction. • Another distinctive feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping. • Thanks to the height control of the blade position, the operator can set the blade close to the top edge of the material. After the cut, the blade is automatically raised back to its previous position. Alternatively, the blade can be set to remain in the lower position. During the cutting cycle, the software continuously compares blade load to preset values, and the sawing system can be stopped if irregularities are detected. Lsdpfx Aofg E Hpeiqshf • The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. • The hydraulic unit, including filter and pressure gauge, ensures especially smooth operation at constant pressure. • Precision-ground carbide inserts clamp the saw band, complete with lateral, hardened and adjustable guide rollers. The adjustable blade guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder controlled via the machine software. Tension is automatically released after a preset period when the machine is idle or after a cycle is completed. • Automatic version with CNC control available in X-TECH 900 / 1200 models, with a feed length of 500 mm for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor to enable precise positioning even under maximum load. • All guided movements are supported by four recirculating ball guides with high static and dynamic load capacity; feed friction is greatly reduced. Hardened and ground prismatic guides. Price on request.

Durumu: yeni, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-proof and ergonomic control panel with oil-resistant EPDM cover a. • Material height sensor c. (automatic cut start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (disinfectable) • Easy top access to saw, material, and feed unit • Foldable safety cover Lhsdpfed Iip Ajx Aiqef • Fine adjustment for feed • Semi-automatic cutting! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering desired quantity and length: material positioning, cutting, and piece counting until program completion • MPS control for input of required quantity of feed cycles • All key machine data is displayed on the LED display during the cutting process (current consumption, cutting time, quantity) • Input data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit is mounted on a floating bearing • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, via reversing automatic, repeatable 1 – 29 times; remnant piece length 210 mm

Durumu: yeni, 90 derecede kesme alanı: yuvarlak 305 mm 90 derecede kesme alanı: kare 260 mm 90 derecede kesme alanı: dikdörtgen 350 x 200 Testere bıçağı uzunluğu 3375 x 27 x 0,9 mm Bıçak hızı 18 - 100 m/dak Masa yüksekliği 880 mm Toplam güç gereksinimi 1,5/1,8 kW Makine ağırlığı yaklaşık 0,84 t Alan gereksinimi yaklaşık 1,85 x 1,9 x 2,0 m Tam otomatik gönye şerit testere • Sol gönye 45°, otomatik çalışma • Sol gönye 60° yarı otomatik çalışma (programlamadan kesimler) • Malzeme yükseklik sensörü (otomatik kesim başlangıcı algılama) • Tek parçadan yapılmış çerçeve ve dişli, çok sessiz kesim ve çok düşük titreşim • Çıkarılabilir talaş tepsisi (dezenfeksiyon) • Yağa dayanıklı EPDM kapaklı darbeye dayanıklı ve ergonomik kontrol paneli • Testere, malzeme ve besleme ünitesine üstten erişim • Katlanır emniyet kapağı • Hassas besleme ayarı • Yarı otomatik kesim! • CNC kontrolü ile iş akışlarını optimize edin Parça numaraları ve malzeme uzunlukları gibi çeşitli parametreleri girme seçeneği, kesim kanalının otomatik hesaplanması • Farklı uzunluklar ve parça numaraları için 99 alt programlı 10 farklı testere programı için CNC kontrolü, örn. çeşitli Lodpfxsupw R As Aiqohf kesim uzunluklarına sahip 1 kesme programı • Otomatik uzunluk telafisi olan bilyalı vidalı artımlı besleme yoluyla otomatik besleme ünitesi (CNC). 2 mm'den 9.999 mm'ye kadar kesme uzunlukları için ayarlanabilir, kalan uzunluk 170 mm. Şunları içerir: - Mikro püskürtme cihazı - Dengeleme elemanları

Durumu: yeni, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400 x 250 mm Saw blade dimensions: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double-mitre band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre cut left 60° + right 45° • Industrial-grade hydraulics, high-performance 18 bar • Excellent material accessibility • Ammeter for monitoring - Cutting force optimization - Increased blade service life - Optimized cutting accuracy • Hydraulic vice opens/closes automatically • Swarf removal brush • Ball-bearing material turntable • Movable quick-release vice • Material height sensor (automatic cut start detection) Ledpfx Aijd Iiptjqjhf Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lowering until contact with material, or directly start cutting for batch cuts 4. Stop saw blade 5. Raise frame slightly above material 6. Open vice

Durumu: yeni, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Lodsd Iip Ropfx Aiqohf Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length 2,965 x 27 x 0.9 mm Table height 940 mm Band speed 35 / 70 m/min Total power requirement 1.1/1.3 kW Machine weight approx. 0.35 t Space required approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER!!! Double miter metal band saw, hydraulic, semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable feed pressure regulator - Band speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball bearing rotary table for easy miter adjustment - Quick-release vice, movable - Quick clamping lever - Automatic coolant system Freight charge share €120,-

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, TEKNİK VERİLER: -Maksimum yatay kesim uzunluğu: 2500 mm -Maksimum dikey kesim uzunluğu: 2200 mm Ledpfxex S Egae Aiqehf -Maksimum dikey kesim yüksekliği: 1600 mm -Maksimum yatay kesim yüksekliği: 1400 mm -Maksimum kesim kalınlığı: 60 mm -Motor gücü: 5 HP (3,7 kW) Bıçak çapı: 250 mm Bıçak hızı: 5300 devir/dakika

Durumu: yeni, Üretim yılı: 2025, Maksimum yatay kesim uzunluğu: 4200 mm Maksimum dikey kesim yüksekliği: 2200 mm Ledpfx Aoxga H Ijiqshf Maksimum yatay kesim yüksekliği: 2080 mm Maksimum kesim kalınlığı: 60 mm Motor gücü: 5 HP (3,7 kW) Bıçak çapı: 250 mm Bıçak hızı: 5300 devir/dakika Yatay dijital gösterge Dikey dijital gösterge

Durumu: iyi (kullanılmış), Yatay çit veya şerit testere için sağlam blok sıkıştırma taşıyıcısı Lsdpfx Aiotqd Najqehf Uzunluk yaklaşık 9,0 m. Palet genişliği 920 mm. 6 sıkıştırma bloğu. Hidrolik besleme ile. Kurutma fırınlarını vb. beslemek için de uygundur.

Durumu: kullanılmış, Üretim yılı: 2000, Kesme çapı 260 mm Şerit testere uzunluğu 3800 x 27(25) x 0,9 mm Lhedpfx Aioy D A Ewsqsf Kesme genişliği 400 x 260 mm Kesme hızı 20 - 90 m/dak Toplam güç ihtiyacı 1,85 kW Makine ağırlığı yaklaşık 0,62 t Alan ihtiyacı yaklaşık 1,8 x 1,6 x 1,5 m Yarı otomatik gönye şerit testere - Gönye +/- 60 derece - Soğutma sistemi - Acil stop

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, çalışma saatleri: 11.900 h, Kesme boyutları: 4300x4300mm Ljdpfx Asytt H Ajiqshf Bıçak çapı: 350mm Etiket yazıcısı Toplam güç: 20,9 kW Maksimum kesme hızı: 130m/dak (kademesiz ayarlanabilir) Maksimum iterici hızı: 90m/dak Maksimum kesme yüksekliği: 80mm Dört hava tablası Otomatik alt bıçak ayarı Üretim yılı: 2014 Çalışma saati: 11.900

Durumu: kullanılmış, Üretim yılı: 2009, güç: 3 kW (4,08 bg), kesme yüksekliği (maks.): 2.150 mm, kesme genişliği (maks.): 4.300 mm, No. 3261 Vertical Panel Saw ELCON ADVANCE 215 DSX Used, year of manufacture 2009, machine still in operation, expected to be available from 01.05.2026 Precision panel saw ELCON ADVANCE 215 DSX – The panel saw for industrial production Vertical cutting height: 0 – 2150 mm Horizontal cutting height: 50 – 2050 mm Cutting length: 4300 mm Cutting depth: 80 mm (with clamps 55 mm) Saw blade protrusion behind panel: 15 mm Saw blade: 303 x 30 mm, Z-60 hollow flat tooth Saw blade speed: 4200 rpm Motor: 3 kW Air requirement: 6 bar Material support rollers: 20 rollers, ball bearing mounted + 2 infeed and outfeed rollers Panel clamping for horizontal cutting via pneumatically operated workpiece clamping device with switch on the control panel Middle support: 3 support elements for 3 m of support, pneumatically folding Measurement readout for horizontal cutting via electronic digital display with zeroing function (for strip cutting top down) / via scale from 0 – 2100 mm / via strip cutting stop from 75 – 730 mm Measurement readout for vertical cuts via electronic digital display / via scale from 0 – 1300 mm Extraction ports: 100 mm for the saw unit and 120 mm for the suction duct on the right side of the machine frame ADVANCE features include 2 pneumatic clamping grippers, which are motor-driven on a ball screw along the vertical axis and can move from top to bottom (the grippers handle panels up to a maximum weight of 150 kg) Electro-pneumatic scoring system for splinter-free cuts through double-cutting with the main saw blade Torsion-free, free-standing machine frame Round bar guide for vertical and horizontal travel Pneumatically retractable slatted frame to prevent cutting into a rear support slat with the saw blade Extraction port for the saw head for dust generated in front of the workpiece Extraction ports for 3 vertical suction ducts for dust generated behind the workpiece Precisely adjustable folding stop for vertical cuts, guided on a 30 mm round bar Stop extension Fine adjustment for horizontal cuts via handwheel Folding strip cutting stop with ball-bearing scanning at the upper edge of the panel, adjustable from 75 – 730 mm for repeatable cuts Manual programming rail for setting 5 different horizontal fixed dimensions Pneumatic plunge function for the saw unit via plunge lever Pneumatic saw head lock from the control panel for horizontal cuts Template holder Lodpjyvu Afefx Aiqshf Minimum strip height with Advance clamping grippers: 400 mm Installation dimensions approx. 5810 x 1860 x 3210 mm (LxWxH) Transport dimensions approx. 5510 x 2400 x 2580 mm (LxWxH) Weight approx. 1360 kg Sale on behalf of customer, ex location near 72280 Dornstetten, without dismantling, transport, or assembly Dismantling, loading, and transport by us is optionally possible Specifications and price subject to change and error To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is in "as is" condition Technical details, condition description, year of manufacture, and delivery scope according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as seen” Pictures and videos are examples and do not represent the actual scope of delivery - Prices plus statutory VAT, payment before collection or dispatch - ex works

Durumu: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for X-axis fence 12" touchscreen display Saw Frame • Machine manufactured with precision parts to 1/100 mm accuracy • Massive, self-supporting, fully welded, torsion-resistant saw frame • TRK1 full-surface support wall made from birch plywood with integrated small parts tray • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during cutting operation Lodpfx Aieyx H Dtsqshf Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position recognition Saw Unit • Play-free, smooth-running guides • Robust support of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to extensive automation • Laser-assisted indication of horizontal cutting line • Automatic clamping of motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy changeover to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control System • 12" touchscreen control unit for optimal operator guidance • Multilingual user interface • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic sawing process • Continuously adjustable feed speeds from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • 24VDC UPS for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • DMS.x digital measuring system (horizontal axis for vertical cuts) • EPS.y electronic positioning system incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple award-winner (incl. Design Prize Switzerland) • Function- and operator-oriented ergonomics Installation • Wall or free-standing installation possible

Durumu: iyi (kullanılmış), Üretim yılı: 2007, Kod: 0325 Marka: STETON Model: REBECCA - CE Standartı Eğilebilir ana bıçak ve çizici üniteli panel ebatlama makinesi; mobilya, marangozluk, paneller, ahşap pencere çerçeveleri, kapılar, plastikler, kompozit malzemeler ve çeşitli uygulamalar için uygundur - CE Standartı - 2007 Model Teknik Özellikler: Alüminyum kızak uzunluğu: 1500 mm Kareleme kapasitesi: 1610 mm Bıçak eğimi: 90-45° Maksimum bıçak çapı: 350 mm (Delik: 30 mm) Bıçak 90° konumunda kesme yüksekliği: 115 mm Lhodpoyt I D Nefx Aiqef Bıçak 45° konumunda kesme yüksekliği: 95 mm Bıçak motor gücü: 4 Hp Çizici ünite bıçak çapı: 100 mm (Delik: 20 mm) Çizici motor gücü: 0,75 Hp Paralelogram bıçak koruyucu ve koruma kapağı Tabla üzeri kare genişliği: 1050 mm Emiş portu çapı: 120 mm ve 60 mm Taşıma için toplam ölçüler: 1700 x 1700 x 1450 mm (Y) Ağırlık: 600 kg

Durumu: kullanılmış, Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, Üretici: HOLZMA Model: OPT HPP 350/43/43/X Makine tipi: Kirişli Testere (Beamsaw) Üretim yılı: 2005 Çalışma durumu: Hâlâ bağlı Kesme uzunluğu: 4.300 mm İtici stroku: 4.250 mm Tutamaç sayısı: 6 Maks. ilerleme hızı: 130 m/dk Kademesiz ayarlanabilir ilerleme Testere bıçağı çıkıntısı: 80 mm Maksimum testere bıçağı çapı: 350 mm Lhedpfx Aioxwwfvsqof Ana motor gücü: 9 kW Çizici testere: Var Durma tarafı: Sağ taraf HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Uygunluk işareti: CE işareti Ağırlık: 5.000 kg

Durumu: kullanılmış, Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, güç: 4 kW (5,44 bg), giriş voltajı: 400 V, giriş frekansı: 50 Hz, testere bıçağı çapı: 250 mm, kesme derinliği: 60 mm, bölüm uzunluğu (maks.): 3.300 mm, The used ELCON panel saw type 215D is a modern and powerful vertical panel saw designed for precise cutting of various panel materials. With a cutting length of 3,300 mm, it is ideal for use in joineries and industrial applications where space is limited. The machine is in like-new condition, offering high precision, smooth operation, and a robust construction. Machine features Ledpfx Aieyyk Nijqehf - Vertical panel saw - Precision guidance system - Stable roller support - Extraction port - Sturdy machine frame - Ergonomic controls Further technical data - Vertical cutting height: 2,100 mm - Extraction port: Ø 100 + 80 mm