Kullanılmış Mubea Koordinat Tablosu Ile 100'E Kadar Delgeç satın al (83.238)

Koşul: mükemmel (kullanılmış), Üretim yılı: 2001, Viessmann Vitoplex 100/405KW Hnedpfx Acoy E Ec Iodsl

Koşul: mükemmel (kullanılmış), Üretim yılı: 1998, Torna çapı 410/440 mm Torna boyu 950 mm Kontrol sistemi Siemens / Weiler D2 Maksimum iş parçası ağırlığı 900 kg Mil kafası Gr 6 MK 6 Mil deliği 54 mm Tabla hareketi 230 mm Hnsdpfoyrh Apsx Acdel Puntalama mili çapı MK 4 mm Puntalama mili hareketi 120 mm Uç yüksekliği 200 mm Maks. diş adımı mm 0,1 - 250 mm Mil devir hızı - kademesiz 1 - 3000 dev/dak Toplam güç ihtiyacı 12 kW Makine ağırlığı yaklaşık 2,1 t Yer ihtiyacı yaklaşık 2,3 x 1,5 x 1,8 m

Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall Hsdpfxjy Nu Hke Acdsnl * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) * Grating cover in the loading platform's sloped section...

Koşul: iyi (kullanılmış), Palet raf kirişi için teknik veriler: Raf sistemi: META Thyssen Teslimat kapsamına dahildir: 01x Palet raf kirişi, kullanılmış Malzeme rengi: sarı Kiriş tipi: HN 100|20 Kutu profil: 100 x 50 mm Askı: 3 HK (kanca) Net açıklık: 3.600 mm 02x Emniyet pimi, kullanılmış Tasarım: tamamen galvanizli Boyuna taşıyıcıların kazara kaldırılmaya karşı emniyete alınması için Firmamızdaki iletişim kişileriniz: Bay: Andre Evering Hjdpfxjy Akh Ro Acdjnl Bay: Mario Klöver Bay: Falk Deutsch Ürünle ilgili genel bilgiler: Bu ürün yalnızca teslim alım yoluyla satılmaktadır. Bunun dışında talep edilen nakliye veya gönderim için, teslimat yeri ve kapsamına bağlı olarak ayrıca ücret talep edilir ve bunlar bizimle iletişime geçilerek öğrenilebilir.

Koşul: mükemmel (kullanılmış), Profesyonel ORION freze tutucu satıyorum – yüksek Alman işçiliği kalitesi. • Tip SK40 Ø6-100 • DIN 69871 AD standardı – merkezi soğutmalı • Ø6 mm için manşon • Uzunluk 100 mm • Takım dâhil (freze / matkap) • Çok iyi durumda, kullanılmış ve tam çalışır. ORION tutucular, SK40 koni ile CNC işleme merkezleri ve frezeler için güvenilir bir tercihtir. BELİRTİLEN FİYAT 1 ADET İÇİNDİR. Hedsxcgxvopfx Acdsnl

Koşul: ikinci el, Üretim yılı: 2000, Baskı 100 t Çıkıntı mesafesi 620 mm Strok 0-100 mm Sac kalınlığında delik çapı 40 içinde 20 mm Vuruş sayısı 49 vuruş/dak Toplam güç ihtiyacı 15 kW Makine ağırlığı yaklaşık 3.500 kg Aksesuarlar: - Makaralı konveyörler Hnjdpfeyv Ncyex Acdsl

Koşul: ikinci el, Üretim yılı: 2006, Basma kuvveti 100 t Çap 40 mm Dışa çıkış 760 mm Hnsdpfeyv Nrzox Acdjl Toplam güç 8,5 kW Ağırlık 3.600 kg Aksesuarlar: -Destek masası -Ayak pedalı

Koşul: ikinci el, Lütfen teklif fiyatınızı belirtiniz. Ambalajsız ve nakliyesiz fiyat; Peşin ödeme. Makine ile ilgileniyorsanız bize bir fiyat teklifi vermeniz gerekir. Teslim bizim yerimizde olacaktır Teslimat şartları: EXW Cugir, Romanya Alıcı makinenin sökülmesine yardımcı olabilir. Hjdewk Dwnjpfx Acdsnl Makinenin taşınmasından alıcı sorumludur. Makinenin sadece forklift / vinç ile römork / kamyona yükleme kısmını organize ediyoruz

Koşul: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, We are offering this used GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P air-cooled water recooler, year of manufacture 2017. Project number: 101048869 Device designation: S-GFHE 080.5/A-N(S)-G4/2P Device serial number: 404549442/19.02129 Year of manufacture: 2017 Ambient temperature min.: -30.0 °C Ambient temperature max.: +50.0 °C Volume: 116.2 l Permissible temperature (TS) min.: -50.0 °C Permissible temperature (TS) max.: +100.0 °C Hnsdpfxjy Akgyj Acdsl Test pressure: 11 bar Fan speed: 2609 rpm Fan current: 22.4 A If you have any questions or require further information, please feel free to send us a message or call us.

Koşul: ikinci el, Fiyat: Talep üzerine Profil çelik makası, zımbalama ve makas kombinesi Dahil: Dayama Üretici: Mubea / Muhr & Bender Tip: Hidrolik Model: KBLH 1000 Kapasite: 110 ton Sac makası: 200x26 mm, 500x20 mm Köşebent kesme: 85x75x16 mm Çalışma derinliği: 510 mm Makine ağırlığı: 4600 kg - Dokümantasyon mevcut: Hayır - CE sertifikası mevcut: Hayır - Tahrik: Hidrolik - Zımba kuvveti [t]: 110 - Zımba çalışma mesafesi [mm]: 510 - Opsiyonlar: Boy dayaması Finansal Bilgiler KDV: Belirtilen fiyat KDV hariçtir KDV/Farklılaştırılmış vergilendirme: KDV, şirketler için indirilebilir Hsdpjwnhd Hofx Acdjnl Endüstri alanındaki tüm ürünler için teslimat ve takas her zaman mümkündür Lukas van Rossum

Koşul: mükemmel (kullanılmış), GARANT (Hoffmann Group) markasının profesyonel tutucuları. Model 300230 6 SK40-6-100 – bağlama çapı Ø6 mm, uzunluk 100 mm. • SK40 konik – CNC standardı • Bağlama çapı Ø6 mm • Tutucu uzunluğu 100 mm • Maksimum devir hızı 25.000 dev/dak • Yüksek hassasiyet ve sıkı tutuş stabilitesi • Kullanılmış, çalışır durumda, kullanıma hazır. -- FİYAT 1 ADET İÇİNDİR -- Hnsdpfx Ajw Sy D Ejcdel

Koşul: mükemmel (kullanılmış), Profesyonel Mahr markalı Micromar 40 EWR(i) model dijital mikrometre – 0,001 mm hassasiyete sahip son derece hassas ölçümler için tasarlanmıştır. Cihaz, IP65 toz ve suya dayanıklı versiyonda sunulmakta olup, metroloji, kalite kontrol ve endüstriyel atölye uygulamaları için idealdir. Ölçüm aralığı: 100 – 125 mm. Hassasiyet: 0,001 mm. Büyük ve okunaklı LCD ekranlı dijital gösterge. Koruma derecesi: IP65 – toz ve sıçramalara dayanıklı. 'ABS' ve 'Hold' fonksiyonları – hızlı ölçüm dondurma ve sıfırlama özelliği. Yüksek rijitlikte gövde, ergonomik tutuş. Orijinal kutu, sertifika, kullanım kılavuzu ve 100 mm kalibrasyon standardı ile birlikte verilmektedir. Durumu: pratikte yeni, sadece test amaçlı kullanılmıştır. Hedpfjxl Rgisx Acdenl

Koşul: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: Hsdpfx Asy Aug Decdsnl * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Koşul: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 500 mm x 8° * 8 pairs of foldable lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Two-section steel ramps: * One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering * Ramp with hydraulically folding ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes * Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually Hsdpfxoy Augwo Acdsnl * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data. Landing legs: * JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot blasted after welding using a wheel blast system * Second blasting using corundum for optimal adhesion of paint system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL * Rear section metallized and painted in RAL 9010 pure white Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings at the galvanized front connector panel * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the platform’s rear bevel * Super Grip rubber ma

Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Hnsdpfjy Auhuex Acdjl * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° Hjdjy Aufmjpfx Acdsnl * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Koşul: mükemmel (kullanılmış), Üretim yılı: 1997, Torna tezgahı Weiler E 50/1 1997 Teknik Veriler: Hodoymdw Sspfx Acdsnl WEILER Model: E 50 / 1 Üretim yılı: 1997 Punta yüksekliği: 280 mm Punta arası mesafe: 1000 mm Salınım çapı: 500 mm Yatak üstü döner çap: 570 mm Kalemlik üstü döner çap: 340 mm Mil devir sayısı: 0 - 2500 rpm Ayna

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 03/2003, yükleme alanı uzunluğu: 13.250 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 3.200 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 13.250 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.200 mm, süspansiyon: hava, lastik boyutu: 385/65-R22.5, renk: beyaz, Üretim yılı: 2008, Donanım: ABS, = Additional Options and Accessories = - ADR - BPW axles - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Hnjdpfx Acoy Aag Nsdjl Fluid chassis, year of manufacture 2008, with GOFA tank body, year of manufacture 1991, single-compartment tank semi-trailer with 50,000 l capacity for butane/propane/gas, ADR (FL, AT), tank inspection valid until 03/2028; leak test valid until 02/2031, ABS/EBS, BPW axles with disc brakes, 1st axle = lift axle, Alcoa rims, 28 bar test pressure, tyres 385/65-R22.5 (Tread depth: L: 10/10/9 mm; R: 16/10/14 mm), unladen weight: 12,000 kg, gross vehicle weight: 35,000 kg, German registration with valid technical inspection until 31.05.2026. = Further Information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: alloy wheels; lift axle; max. axle load: 9,000 kg; tyre tread left: 65%; tyre tread right: 95% Rear axle 2: alloy wheels; max. axle load: 9,000 kg; tyre tread left: 65%; tyre tread right: 65% Rear axle 3: alloy wheels; max. axle load: 9,000 kg; tyre tread left: 55%; tyre tread right: 90% Weights Unladen weight: 12,000 kg Payload: 23,000 kg gross vehicle weight: 35,000 kg Functional Superstructure brand: GOFA Gocher Fahrzeugbau GmbH GAZTANK 50,080L Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork Hjdpfx Aog Sk T Decdjnl First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: Hodoyvnfgepfx Acdjnl * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Koşul: ikinci el, Üretim yılı: 1995, Swing diameter: 720 mm Turning length: 3,000 mm Control: Siemens 805 Swing diameter over support: 430 mm Spindle speed: 1,800 rpm Tailstock quill taper: MT 6 Steady rest: 3 units Main drive motor: 36 kW Hnjdpfeyqvbdsx Acdjl Z-axis travel: 3,050 mm X-axis travel: 410 mm Swing diameter over cross slide: 430 mm Spindle drive: 28 kW Workpiece weight: 3,000 kg Spindle bore: 106 mm 3-jaw chuck diameter: 305 mm Total power requirement: ... kW Machine weight approx. 6 t Required floor space approx. 4 x 2.4 x 2 m Steady rest 1: Diameter: 120–300 mm Steady rest 2: Diameter: 220–400 mm Steady rest 3: Diameter: 350–500 mm Chuck: Diameter: 315 mm The technical data are manufacturer or operator specifications and therefore non-binding for us. Prior sale excepted; our terms and conditions of sale and delivery apply exclusively. About us - Over 400 own machines in stock - Over 15,000 m² warehouse area, crane capacity 70 t - More than 10,000 accessory items for your workshop If you are looking to sell machines, production lines or your business, please contact us. Further offers can be found on our website. Inspections are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Koşul: mükemmel (kullanılmış), Üretim yılı: 2020, Weiler E 50 2020 model için gezici lunet. Çok iyi durumda. Sıkma aralığı: 12 - 125 mm. Hnodpfeyfnwmex Acdel

Üretim yılı: 2025, Koşul: ikinci el, Motor markası: - Hjdpfsydl Nqex Acdjnl Daha fazla bilgi için satış ekibiyle iletişime geçin.

Koşul: ikinci el, Üretim yılı: 2022, toplam ağırlık: 340 kg, yük kapasitesi: 8 kg, Yük üssü: FCA Pegnitz Hnsdpfx Acexl Hi Hodel Teslimat süresi: anlaşmaya göre Ödeme koşulları: Makineyi devralmadan önce %100, net

Koşul: iyi (kullanılmış), Matris tutucu, oyma aracı, delme aracı, pres, delme matrisi, delme pensesi, delme zımbası Hedpoiqhg Uofx Acdjnl - Üretici: Mubea, delme zımbası Ø 90 mm - Tip: Mubea 90, tutucu Ø 50 mm - Ölçüler: Ø 90 x 115 mm - Ağırlık: 3,4 kg