Kullanılmış Optiturn S600 satın al (141)

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Podpfxjy U Syro Apdegn Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durum: yeni gibi (sergi parçası), Üretim yılı: 2025, Makine sergidedir ve sadece gösteri amaçlı kullanılmıştır. Optiturn S400 HSC CNC Doğrudan üreticiden Premium CNC torna tezgahı. Pgedsymlhrepfx Apden S400 HSC - Siemens SINUMERIK 828D kontrollü OPTIMUM Premium CNC freze makinesi performans, hız, hassasiyet ve uzun hizmet ömrü ile karakterize edilir. Ağır hizmet tipi tasarım - Kompakt tasarım - Tüm eksenlerde SIEMENS servo motorlar - Takım ölçümü için Renishaw ölçüm kolu - Maksimum doğruluk için entegre enkoderli tüm servo motorlar - Motorlu iş mili olarak tasarlanmış ana iş mili - Özellikle büyük işleme çapları ve engelsiz talaş akışı için 45° eğimli yatak tasarımı çip tepsisine çip akışı - Yumuşak çeneli hidrolik üç çeneli torna aynası Ø 170 mm - Servo takım değiştirici VDI 30, 12 takım pozisyonlu - Tüm eksenlerde yüksek hızlı travers hızları için sertleştirilmiş ve hassas taşlanmış vidalı miller Eksenler - Daha hızlı takım değiştirme hızı - Yüksek hidrolik sıkıştırma kuvveti - İşleme otomasyonunu ve yüksek verimliliği gerçekleştirmek için titreşimsiz ağır hizmet tipi kesme aşırı durumlarda - Boyutsal olarak stabil lineer kılavuzlar, maksimum statik ve dinamik rijitlik sayesinde uzun bir hizmet ömrü sağlar sertlik - Manuel alet ölçümü için cihaz - Isı eşanjörü - Etkinleştirme anahtarı ve acil durdurma anahtarına sahip taşınabilir, elektronik el çarkı, programlarda çalışmayı çok daha kolay hale getirir. önemli̇ ölçüde programlar - Bant tipi talaş konveyörü verimli talaş kaldırma sağlar - Çalışma alanının tamamen aydınlatılması için çalışma lambası - Temizleme tabancalı soğutma sıvısı cihazı - RJ45 ve güç arayüzü - EMC (elektromanyetik uyumluluk) - Ek paket SIEMENS maddi kusur sorumluluğu ve ücretsiz çevrimiçi/yerinde servis OSS Plus bkz. "SIEMENS OSS Plus ek paketi" sayfa 117 - 1 yıllık bakım sözleşmesi Temel dahil Makine verileri Elektrik bağlantısı 400 V / 3 Ph ~50 Hz Toplam bağlı yük 25 kVA Mil Tahrik motoru S1 çalışması 11,6 kW Tork tahrik motoru S1 çalışması 65 Nm Tahrik motoru S6-30% çalışma 14,4 kW Tork tahrik motoru S6-30% çalışma 81 Nm İş mili tutucusu A2-5 İş mili deliği Ø 56 mm Ayna açıklığı Ø 45 mm Hidrolik torna aynası Ø 170 mm Soğutma sıvısı sistemi Soğutma sıvısı pompa gücü 700 W Tank kapasitesi 160 litre Hidrolik sistem Hidrolik pompa çıkışı 1,5 kW Tank kapasitesi 36 litre Makine verileri Maks. dönüş Ø 220 mm Döndürme uzunluğu 320 mm Çapraz kızak üzerinde dönüş Ø 300 mm Makine yatağı üzerinde dönüş Ø 500 mm 45° eğimli yatak Hız aralığı İş mili hızları* 30 - 6.000 dak-1 Takım değiştirici Tip Servo VDI 30 Takım pozisyonu sayısı 12 Doğruluk Tekrarlama hassasiyeti ± 0,004 mm Konumlandırma hassasiyeti ± 0,004 mm Travers yolu X ekseni 180 mm Z ekseni 350 mm Besleme kuvveti Dinamik X ekseni 3,6 kN Z ekseni 3,6 kN Besleme hızı X ekseni / Z ekseni 30 m/dak. Motor torku X ekseni / Z ekseni 6 Nm Boyutlar Uzunluk x genişlik x yükseklik 2.000 x 2.250 x 1.550 mm Toplam ağırlık 2.600 kg

Durum: yeni gibi (sergi parçası), Üretim yılı: 2025, Optiturn L28 HS CNC torna doğrudan üreticiden. L28 HS - Siemens kontrol SINUMERIK 808D Advanced PPU 150 ile OPTIMUM CNC torna tezgahı. Gri dökme demirden yapılmış destekli makine yatağı - Ayrıntılı iş mili yatakları - Acil durdurma anahtarı - Merkezi yağlama - Referans anahtarı - Bakım dostu koruyucu muhafaza - Bakım için arka erişim kapağı - Ön sürgülü kapıdaki güvenlik anahtarı - Döndürme tareti döndürme merkezinin arkasında bulunur (sol döndürme aleti) - Doğrusal kılavuz - "SINUMERIK 808D on PC" yazılım paketi dahildir. (Pratik eğitim yazılımı, böylece iş parçaları PC'de çevrimdışı olarak programlanabilir ve simüle edilebilir. Ücretsiz ücretsiz indirin - İki yıllık SIEMENS garantisi dahildir Teknik veriler Elektrik bağlantısı 400 V / 3 Ph ~50 Hz Toplam bağlı yük 3,75 kVA Mil Tahrik motoru S1 çalışması 2,2 kW Tork tahrik motoru S1 çalışması 14 Nm İş milindeki tork 28 Nm Mil tutucu DIN 6350 A2-3 Mil konisi 5C İş mili deliği Ø 30 mm Soğutma yağlama sistemi Soğutma sıvısı pompası çıkışı 95 W Tank kapasitesi 25 litre Makine verileri Merkez yükseklik 169 mm Merkez genişliği 430 mm Çapraz kızak üzerinde Ø 200 mm sirkülasyon Dönme Ø makine yatağı üzerinde Ø 300 mm Hız aralığı İş mili hızları* 40 - 4.000 dak-1 Takım tareti Elektrikli tip Takım pozisyonu sayısı 6 takım Montaj yüksekliği, genişlik kare maks. 16 mm Delme çubuğunun montaj çapı maks. 16 mm Doğruluk Tekrarlama hassasiyeti ± 0,01 mm Pgsdpfeymlf Rjx Apdjn Konumlandırma hassasiyeti ± 0,01 mm Bhajn7pvcu Travers yolu X ekseni 145 mm Z ekseni 465 mm Besleme hızı X ekseni 10.000 mm/dak. Z ekseni 12.000 mm/dak. Siemens Finans aracılığıyla makine kiralama mümkündür. Likidite gerekli.

Durum: yeni gibi (sergi parçası), Üretim yılı: 2025, Optiturn L34 HS CNC torna doğrudan üreticiden. L34 HS - Siemens kontrol SINUMERIK 808D Advanced PPU 150 ile OPTIMUM CNC torna tezgahı. Gri dökme demirden yapılmış destekli makine yatağı - Ayrıntılı iş mili yatakları - Acil durdurma anahtarı - Merkezi yağlama - Siemens'ten iş mili ve besleme motorları - Bakım dostu koruyucu muhafaza - Bakım için arka erişim kapağı - Ön sürgülü kapıdaki güvenlik anahtarı - Döndürme tareti döndürme merkezinin arkasında bulunur (sol döndürme aleti) - Doğrusal kılavuz - "SINUMERIK 808D on PC" yazılım paketi dahildir. (Pratik eğitim yazılımı, böylece iş parçaları PC'de çevrimdışı olarak programlanabilir ve simüle edilebilir. Ücretsiz İndir Teknik veriler Elektrik bağlantısı 400 V / 3 Ph ~50 Hz Toplam bağlı yük 6,5 kVA Mil Tahrik motoru S1 çalışması 3,7 kW Tork tahrik motoru S1 çalışması 23,6 Nm İş milindeki tork 40 Nm Mil tutucu DIN 6350 A2-3 İş mili deliği Ø 46 mm Soğutma sıvısı sistemi Soğutma sıvısı pompası çıkışı 95 W Tank kapasitesi 75 litre Makine verileri Merkez yükseklik 165 mm Merkez genişliği 600 mm Çapraz kızak üzerinde dönüş Ø 146 mm Dönme Ø makine yatağı üzerinde Ø 350 mm Hız aralığı Yvwdh0 İş mili hızları* 30 - 3500 min-1 Takım tareti Elektrikli tip Takım pozisyonu sayısı 6 takım Montaj yüksekliği, genişlik kare maks. 16 mm Delme çubuğunun montaj çapı maks. 16 mm Doğruluk Tekrarlama hassasiyeti ± 0,01 mm Konumlandırma hassasiyeti ± 0,01 mm Psdpfxoymlfke Apdsgn Travers yolu X ekseni 145 mm Z ekseni 465 mm Besleme hızı X ekseni 6.000 mm/dak. Z ekseni 8.000 mm/dak. Siemens Finans aracılığıyla makine kiralama mümkündür. Likidite gerekli.

Durum: yeni gibi (sergi parçası), Üretim yılı: 2026, Machine is on display and has only been used for demonstration purposes. Optiturn L44 CNC Premium CNC Lathe directly from the manufacturer. L44 CNC – The OPTIMUM Premium CNC lathe equipped with Siemens SINUMERIK 828D control is distinguished by its power, speed, precision, and long service life. Dimensions and Weights Maximum width/depth: 2300 mm Approx. length: 2530 mm Approx. width/depth: 1595 mm Approx. height: 1795 mm Approx. weight: 2600 kg Working Areas Chuck diameter: 150 mm Chuck clamping actuation: hydraulic Centre height: 223 mm Centre distance: 850 mm Swing diameter over bed: 446 mm Swing diameter over gap: 520 mm Swing diameter over cross slide: 240 mm Bed width: 300 mm Axis Torque X-axis: 6 Nm Z-axis: 8.5 Nm Speed Range Number of speed ranges: 1 Speed range: 10 – 3000 rpm Electrical Data Main drive motor power: 7 kW Supply voltage: 400 V Mains frequency: 50 Hz Electrical Connection Total connected load: 23 kVA Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Hydraulic System Motor output: 0.75 kW Tank capacity: 50 l Ball Screw X-axis diameter: 25 mm X-axis lead P: 5 mm X-axis accuracy class: C3 Z-axis diameter: 40 mm Z-axis lead P: 5 mm Z-axis accuracy class: C3 Coolant System Coolant pump power: 270 W Tank capacity: 90 l Machine Data Spindle bore diameter: 40 mm Motors Main drive motor torque: 33 Nm Tailstock Taper: MK 4 Quill stroke: 165 mm Quill diameter: 52 mm Spindle Spindle nose: DIN ISO 702-1 No. 5 Spindle bore/bar capacity: 52 mm Control Type: Sinumerik 828D PPU 240 System software: SW 24 CNC memory: 3 MB Look Ahead: 50 Block change time: 3 ms Number of tools: 128 Travel X-axis: 250 mm Z-axis: 760 mm Vertical Spindle Continuous operation (S1) drive power: 7 kW Drive power S6-30% duty cycle: 16 kW Main drive torque: 33 Nm Main drive torque S6-30% duty cycle: 80 Nm Feed Rate X-axis: 15000 mm/min Z-axis: 15000 mm/min Feed Force Feed force X-axis: 7.5 kN Feed force Z-axis: 5.3 kN Tool Changer Type: hydraulic; VDI 30 Number of tool stations: 8 Max. square tool size: 20 x 20 mm Max. boring bar diameter: 25 mm • Siemens spindle and servo motors • Full enclosure with safety features • Standard with max. spindle speed up to 3000 rpm • Automatic central lubrication • Swiveling control panel • Tailstock cover • Electronic handwheels for X and Z axes • Coolant system with 90-liter coolant tank • RJ45 connector, USB port, and 230 V power outlet Psdpfx Apsymkwrjdegn • EMC (Electromagnetic Compatibility) • Six leveling feet • Operating tools SINUMERIK 828D Basic COMPLETE PACKAGE • Safety Integrated • Stock material detection and machining • ShopTurn step programming • Network drive management • 3D simulation • Trace function Control • 10.4” color display • 4:3 format • User-friendly SINUMERIK Operate software • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card Guideways • Stable flat-bed guideways Ball Screw • High rapid traverse rates on all axes • Reduced wear • High positioning and repeat accuracy

Durum: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Material Discharge: Pgsdpey Ii Dzofx Apdon 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3x 9t with air suspension; axle spacing 2 x 1310 mm; lift and lower valve; loading pressure gauge mounted on top of the tank; Wabco Smartboard; Wabco tire pressure monitoring system; first axle liftable, without tractor equipment, third axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, mounted on Alcoa Ultra One aluminum rims, 11.75x 22.5 ET 120 Braking System: EBS 4S/2M WABCO pneumatic braking system with RSS, compliant with standard 98/12/EC - ECE R13/09; brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with pivoting foot Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the saddle plate on the frame, yellow side marker lights as required, rear position lights, front marker lights, rear license plate lights, all compliant with standard 97/28/EC-2007/35/EC, two multi-chamber rear lights at the turntable mounting, in aluminum brackets (compliant with 97/28/EC-2007/35/EC), two rotatable LED work lights top left and right of the tank, yellow warning beacon at the rear near the hose tubes, 2x reversing lights on the underrun protection, 2x reversing lights near the landing legs (each switchable from the energy console) Tank Construction: Horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, 35,000 liters volume, 24 months tank warranty from delivery, 2" kingpin as per standard 94/20/EC Operating Parameters: Pressure vessel per Pressure Equipment Directive PED 97/23/EC; wall thickness approx. 5 mm; test pressure 3.0 bar – operating pressure 2.0 bar; operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swing and folding dome covers; each cover sealed pressure-tight with 4 wing nuts; support for dome covers on top for storage; closed rain deflector at front, open at rear Material Discharge: 2 material discharge cones with synthetic fabric loosening inserts; individual discharge pipelines DN 100, steel, routed to the rear; 2 pinch valves DN 100 AKO in the pipes; DN 100 ball valve with ring jet nozzle at the end; remote control for ball valve and Storz A coupling at the end of the discharge line Air Piping: Pjdpfjx Nuf Hox Apdegn A 2.5" stainless steel air distribution pipe mounted on the right operating side; air line routed to the front, up to end of silo with check valve and DN 65 connection hose for compressor with Storz B coupling; the air distribution pipe features ball valves for top air, auxiliary air, and loosening; top air 2" at rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C at air pipe rear right; pneumatic connection with blow gun and spiral hose at upper walkway near climbing ladder; 1x vibrator on top of the tank; air line at walkway center top for cleaning with gun; air line in tool box below for cleaning with gun Ladder and Access Equipment: 1 aluminum ladder mounted at rear left of the vehicle; 1 pneumatic aluminum safety scissor railing with lock system acting on the brake; 1 aluminum safety walkway

Durum: mükemmel (kullanılmış), kilometre: 871.943 km, güç: 368 kW (500,34 bg), ilk tescil: 09/2018, yakıt türü: dizel, lastik boyutu: 385/65-R22.5, dingil konfigürasyonu: 6x4, dingil mesafesi: 4.500 mm, yakıt: dizel, frenler: retarder, renk: yeşil, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, toplam uzunluk: 6.870 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.500 kg, izin verilen aks yükü (aks 3): 9.500 kg, Üretim yılı: 2018, Donanım: ABS, AdBlue, araç içi bilgisayar, buzdolabı, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, ikinci yakıt deposu, klima, merkezi kilitleme, navigasyon sistemi, retarder, sisal lambaları, yokuş kalkış desteği, çekiş kontrolü, = Additional Options and Equipment = - 2-pedal control - Adaptive cruise control - Aluminum fuel tank - Heated mirrors - Brake booster - Differential lock - High beam - Low-noise operation - Cab - Air conditioning - Air suspension - Air-suspended seats - Air horn - Spare wheel - Beacon light - Sun visor - Lane departure warning system - Stability control - Immobilizer = Notes = Very nice 09/2018 SCANIA S600 6x4 with 871,943 km, 78-ton exemption and the following features: Retarder, spoiler, mudguards and side skirts, hydraulically adjustable fifth wheel coupling, 2 diesel tanks (total capacity approx. 1,000 L), refrigerator, 2 beds, automatic climate control, SCANIA INFOTAINMENT PREMIUM with navigation, 27-inch display, front axle tires: 385/65-R22.5 (left tread: 4 mm; right tread: 8 mm), rear axle tires: 315/80-R22.5 (left tread: 7/7, 10/9 mm; right tread: 9/10, 5/6 mm), curb weight: 10,448 kg, GVW: 30,000 kg, Dutch registration with valid main inspection (APK) until 01.09.2026. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65-R22.5; Max. axle load: 9,000 kg; Steered; Tire tread left: 25%; Tire tread right: 50% Rear axle 1: Tire size: 315/80-R22.5; Twin tires; Max. axle load: 9,500 kg; Tire tread left inner: 45%; Tire tread left outer: 45%; Tire tread right inner: 60%; Tire tread right outer: 55% Rear axle 2: Tire size: 315/80-R22.5; Twin tires; Max. axle load: 9,500 kg; Tire tread left inner: 55%; Tire tread left outer: 60%; Tire tread right inner: 40%; Tire tread right outer: 35% Weights Curb weight: 10,448 kg Payload: 19,552 kg Gross Vehicle Weight (GVW): 30,000 kg Cabin Interior Number of seats: 2 Maintenance, History, and Condition APK (Dutch MOT): inspected until 09/2026 Technical condition: very good Visual condition: very good Identification Pgsdpfxsy Nl Sqj Apden Registration number: 36-BLD-7 Further Information Please contact Arne Honingh for more information.

Durum: ikinci el, Üretim yılı: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, visible signs of wear - Hardened and ground Z-axis guideways - Spindle mount: Camlock DIN ISO 702-2 No. 8 - Precision-machined carriage - Handwheels with adjustable fine graduation, 0.04 / 0.02 mm - All guideways adjustable via gib strips - Shafts, gears, and main spindle run in oil bath - Cross-slide travel range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Gear wheels: Smooth running, hardened and ground, supported with 2 adjustable precision tapered roller bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-shift feed gearbox design - Gears and shafts are hardened and ground, running in oil bath with precision bearings - Switch with lifecycle calculation, tested according to EN ISO 13849 - Bed carriage direction reversible (right/left) via changeover spindle - Central lubrication system in the bed carriage - Leadscrew cover - Emergency stop impact switch, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine graduation, 0.025 mm - Fast, easy, and tool-free adjustment via clamping lever - Heavily ribbed prismatic bed, inductively hardened and precision ground, made from cast iron - Coolant system with separate coolant tank, fill level indicator, and oil separator; easy and complete draining and cleaning per DIN - LED machine lamp inside chip guard - Two gearbox speed ranges - Spindle bore / bar passage: Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for gentle cable and hose routing - Thread dial indicator scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 Type D, for 25 mm square tools - Digital position display DPA 21 - Glass linear scales Dimensions and weights: - Length approx.: 3450 mm - Width/depth approx.: 1150 mm - Height approx.: 1650 mm - Weight approx.: 2560 kg Working ranges: - Center height: 280 mm - Distance between centers: 1910 mm - Swing over bed: 560 mm - Swing in bed gap: 790 mm - Swing over cross slide: 355 mm - Turning length in bed gap: 170 mm - Bed width: 350 mm Speed range: - Number of speed ranges: 2 - Speed range: 25–1600 rpm - Speed control: electronically adjustable Electrical data: - Output (motor power): 7.5 kW - Total connected load: 8.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Coolant system: - Coolant pump capacity: 125 W Pedpfex Dzxaex Apdogn Standards and certifications: - Standard: DIN EN 55011 Tailstock: - Taper: MK 5 - Quill stroke: 180 mm - Quill diameter: 75 mm - Max. tool post mounting height: 25 mm - Spindle taper: Ø 113 mm (Taper 1:20) Threading: - Metric thread pitch: 0.1–14 mm/rev - Number of metric threads: 47 - Imperial thread pitch: 112–2 TPI - Number of imperial threads: 60 - Diametral pitch (DP): 4–112 DP - Number of diametral pitches: 50 - Module thread pitch: 0.1–7 mm/rev - Number of module threads: 34 Feed travels: - Top slide travel: 130 mm - Cross slide travel: 316 mm - Carriage travel: 1710 mm Feed rates: - Longitudinal feed range: 0.031–1.7 mm/rev - Number of longitudinal feeds: 42 - Cross feed range: 0.014–0.784 mm/rev - Number of cross feeds: 42

Durum: ikinci el, Üretim yılı: 2023, Optimum Optiturn TX 5216V – used machine. Pgedpfx Apsx Hdq Tedsn - Machine bed made from heavily ribbed cast iron - One-piece machine base made from steel - High rigidity of the headstock housing due to heavily ribbed 25GG cast iron - Precision-machined carriage - Shafts run on needle bearings; all components are lubricated in an oil bath - Bed guides are hardened and precision ground - All electronic controls are centrally accessible - All feed gearbox gears made of hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with lifecycle calculation, tested in accordance with EN ISO 13849 - Fully covered leadscrew and feed shaft - Fully illuminated work area - Service-friendly, removable rear panel - Hardened and ground faceplate spindle ensures exceptional accuracy and durability - High chip removal rates in roughing operations thanks to large machining capacity - Energy chain provides gentle cable and hose guidance - Lockable chip guard travels with bed carriage, integrated position indicator and coolant hose, manually adjustable - No change gears required - Safety device prevents simultaneous operation of threading and feed mechanisms - Electronic Z-axis feed cut-off - Coolant system with separate coolant tank featuring level indicator and oil separator; easy and complete draining and cleaning according to DIN - Electric position stop with quadruple position stop - Three-jaw chuck included as standard - SWH 7-C quick-change tool post - Tool holder 32 x 130 Type D for 25 mm square tool bits - Large spindle bore Dimensions and Weights Length: approx. 2925 mm Width/depth: approx. 1195 mm Height: approx. 1930 mm Weight: approx. 2470 kg Work Area Centre height: 260 mm Distance between centres: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Frequency: 50 Hz Coolant system Coolant pump output: 60 W Data generated: usage data Tailstock Morse taper: MT 5 Quill stroke: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar capacity: 80 mm Tool post: SWH 7C Spindle taper: MT 7 Thread Cutting Metric pitches: 0.5 – 15 mm/rev Number of metric pitches: 55 Inch pitches: 60 – 2 TPI Number of inch pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module threads: 0.25 – 7.5 mm x π Number of module threads: 55 Travels Top slide travel: 170 mm Cross slide travel: 340 mm Bed slide travel: 1400 mm Feeds Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Cross feed range: 0.025 – 0.75 mm/rev Number of cross feeds: 55

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Pgodjfakkcopfx Apdsn Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Semi-Trailer----Model: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring, first axle liftable without tractor unit equipment, third axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims, 11.75x22.5 ET120. Braking System: EBS 4S/2M WABCO compressed air brake system with RSS, compliant with standard 98/12/EC - ECE R13/09, brake pad wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t load capacity with swing feet. Pedpfex Nufyox Apdogn Electrical System: All lighting in LED version, 24 Volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis support, yellow side marker lights in prescribed quantity, rear position lights, front marking lights, rear license plate lights, lamps according to 97/28/EC-2007/35/EC standard, two multi-chamber lights at the rear in aluminum brackets at the kingpin level per 97/28/EC-2007/35/EC, two rotating LED work lamps mounted top left and right on the tank, yellow warning beacon at the rear at hose pipe height, two reversing lamps in the underrun protection, two reversing lamps at the support height (each switchable on the control console). Tank Construction: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank with 35,000 liters capacity. Tank warranty: 24 months from delivery. King pin 2'' in accordance with 94/20/EC. Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/EC. Wall thickness approx. 5 mm. Test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C. Filling Options: 3 manholes DN 450 with hinged and folding domed covers. Each dome cover is pressure tight with 4 wing nuts. Support for dome covers on top for stowage. Rain guard front closed, rear open. Material Discharge: 2 material discharge cones with synthetic fabric aeration inserts. Individual discharge lines DN 100, steel, combined to the rear. 2 pinch valves DN 100 AKO in the pipelines. Final ball valve DN 100 with ring jet nozzle. Remote control for ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5'' stainless steel air manifold installed on the operator's side (RIGHT). Air line leads to the front, to the end of the silo, with check valve and connecting hose DN 65 for compressor with Storz-B coupling. Ball valves for upper air, auxiliary air, and aeration are on the air manifold. Upper air 2'' at the rear right. PRESSURE LINE INLET REAR RIGHT. External air connection Storz C at the air pipe at rear right. Pneumatic connection with air blow gun and coiled hose at the top walkway area by the access ladder. 1x vibrator on top of the tank. Air line top center on walkway for cleaning with air gun. Air line in lower stowage box for cleaning with air gun. Ladder and Access: 1 aluminum ladder mounted rear left on the vehicle, 1 pneumatic aluminum safety scissor railing with brake-actuated locking system, 1 aluminum ... (text ends here)

Durum: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Material Discharge: 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Pgsdpfxjx Nugde Apdon Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Durum: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" king pin Tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle assemblies with air suspension, axle spacing 2 x 1,310 mm, raise and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice on Alcoa Dura-Bright aluminum rims in 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE – ECE R13/09, brake pad wear indicator connected Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24-volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights fitted at the pivot height in aluminum brackets according to 97/28/CE-2007/35/CE, 1 LED work light on the tank, yellow warning light at the rear mounted at hose tube height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each switchable on the power console) Tank Version: One horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank with 47,000-liter capacity, tank warranty: 24 months from delivery Operating parameters: Pressure tank according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40°C to +80°C Filling Options: 4 manholes DN 450 with pivoting and foldable dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber support for dome covers on top for storage, rain cover closed at the front-open at the rear Material Outlet: 1 material discharge cone DN 800 made from INOX, foldable with INOX disc for loosening, material discharge cone laterally pivoting, DN 150 shut-off valve with white gasket, connection: STORZ-A Pgodpfx Aex Nuftepden Air Piping: A 2.5" stainless steel air manifold mounted on the right operation side, a 4" stainless steel air distribution tube mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connecting hoses with 2" STORZ couplings, micron filter, vacuum valve at the top of the tank, 1x vibrator 1 m before the pivot point Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor rail can be erected from below with a separate ladder folding part, equipped with locking brake when open, 1 aluminum safety grating leading along the left upper side of the tank, anti-slip coating on the tank Feed Hose Holder: 4 hose tube holders 5 m long DN 200 in aluminum with 4 hoses DN 100 and STORZ couplings, hose holder with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Durum: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle aggregates 3x 9t with air suspension, axle distance is 2 x 1310 mm, raise and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: Pgedpjx Nufmefx Apdsn 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swing foot, rear without additional support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted ahead of the fifth wheel on the chassis beam, yellow side marker lights in prescribed quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/EC-2007/35/EC, 2 multi-chamber rear lights mounted at turntable height in aluminum consoles to standard 97/28/EC-2007/35/EC, 1 LED work light on the tank, yellow warning light at rear mounted at hose tube height, 2x reverse lights in underrun protection, 2x reverse lights at landing gear height (each switchable on the power console) Tank Assembly: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn) manufactured A single-compartment tank with a volume of 47,000 liters, tank warranty: 24 months from delivery Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/EC. The wall thickness is approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with pivoting and folding dome lids. Dome lids are pressure-tight with 4 wing nuts each, rubber supports above for dome lid storage, drip edge closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for loosening, discharge cone swivels to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Pneumatic Piping: A 2.5" stainless steel air manifold mounted on the right operating side, a stainless steel air distribution pipe 4" mounted at the rear of the tank, air valves (shut-off flaps) in INOX, air supply and connecting hoses in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the turntable Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail operable from below with separate folding ladder section, equipped with parking brake when open, 1 aluminum safety walkway led along the left top of the tank, anti-slip coating on the tank Hose Carriage: 4 hose tube compartments 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose compartment with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design, left

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system Pgsdpfx Apsgcw Risdjn According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1