Kullanılmış Rss Transportbanden satın al (160)

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Pjdpfoyiw T Eox Anxspr Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Psdpfx Aneyiw T Soxspr Offer and images subject to change.

Koşul: yeni, boş ağırlık: 4.100 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.880 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 980 mm, yükleme alanı hacmi: 12 m³, süspansiyon: hava, lastik boyutu: 385/65 R22,5, dingil mesafesi: 1.310 mm, Donanım: ABS, Frame Pedpfx Anjwc Tbmjxspr Central axle, welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with crosswise safety mechanism. Drawbar Cranked drawbar with height-adjustable heavy-duty bolt coupling (50 mm, approx. -110 mm adjustment range). Support Equipment Front: 1 mechanical landing leg with crank, mounted on the left in direction of travel. 1 mounted access step. Axles SAF Intradrum axles with drum brakes, S-cam brakes 420/180 mm, axle load capacity 9 t/axle, reinforced axle bodies, off-road version, automatic brake adjusters. No axle lift. Brake System/Suspension Brake system compliant with ECE Regulation R13. Two-line compressed air brake system by Knorr. EBS system 2S2M, 2nd axle sensor equipped. RSS/RSP - stability program. Spring-loaded parking brake on 2nd axle. Aluminium air tanks. Brake/air connection lines with two individual coupling heads (yellow/red). EBS/ABS connection cable. Hose lines routed under the drawbar. Electronic air suspension with automatic lowering function via inductive switch and additional lowering lock via rotary switch on trailer. No lift/lowering device. Assistance/Safety Systems SWIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC". Tipper Body Steel welded construction. Fixed steel front wall, 4 mm, approx. 980 mm high. 2 interior and 1 exterior access steps at the front wall. High-strength special steel floor plate, 5 mm (minor floor undulation due to weld distortion possible). 5 pairs of high-swivel lashing rings, 5 t (approx. 2,320 mm between rings). One-piece reinforced aluminum hollow profile side walls, 60/40 mm, approx. 980 mm high, folding with extended turnbuckle locks and spring lift assist, also swinging. Side walls left and right with manual central locking. 2 rear corner posts, fixed at side at board wall height. Steel rear wall, 4 mm (HB400), approx. 980 mm high, swinging with recessed pivots. Hooks for metering chains on rear wall and underside of body. Rear wall locking via automatic pneumatic lock. Sealing strips included. Hydraulics Single-line system with hydraulic connection hose incl. SVK DN13 quick coupling. Tipper cylinder for 3-way tipping, initial lift capacity approx. 30 t; 1 safety cable. Tarpaulin Plastic roll tarpaulin incl. aluminum tube and hand crank. Sideboard overhang approx. 400 mm per side, without customs closure. In direction of travel to the right: horizontal tarpaulin bar rope tie-down; front and rear: zig-zag tie-down. Stop bracket and securing device for rolled-up tarp to the right. Hand crank holder. Tarpaulin fastening on left with 2 tension straps incl. rubber pads and tension locks under the body. Tarpaulin color similar to RAL 9006 White Aluminium. Painting Blasted with steel shot, multi-layer epoxy zinc phosphate primer, spray painted with 2-component polyurethane top coat. Chassis = RAL 7021 Black Grey. Tipper body incl. front wall = RAL 7021 Black Grey. Side walls = RAL 7001 Silver Grey. Rear corner posts = RAL 7021 Black Grey. Rear wall = RAL 7021 Black Grey. Wheel hubs black, powder-coated. Landing feet black, powder-coated. Side underrun protection as per factory decision. Plastic parts black, unpainted. Powder-coated attachments/fittings black. Hot-dip galvanized attachments/fittings unpainted. Subject to errors and prior sale.

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Ppedpfx Anegcw Rmjxor Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Ppedoyh S Aiopfx Anxsr Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9 t axles with air suspension, 1st axle with lift and starting aid, electrically operated. Raise and lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, braking system according to EEC standard, two-line system, spring parking brake on two axles and Wabco EBS (Electronic Braking System) with RSS (Roll Stability Support), aluminum air tanks, electrical system according to German Road Traffic Licensing Regulations (StVZO) with 2 Aspöck five-chamber rear lights, 24V system, aluminum tipper body, Edbro hydraulic system with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on rear door, tipper body optionally available with mud-tight seal. Combined tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE UPON REQUEST COLOR FREELY CHOSEN +€590 delivery costs Also available in Z9-Z13 variants *Images and offers are subject to change* Psdsyh S Acopfx Anxepr

Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Ppjdjfi Nmwjpfx Anxer Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Koşul: yeni, azami yük ağırlığı: 63.960 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available upon request. Chassis: * Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch king pin Underride protection: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing gear: * Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm * ABS Ppedpfx Answx Dcajxor * Centered 10-hole wheel mounting, offset 0 * Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function Steering: * 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system * Centralized external grease points Axle lift: * First and second axles automatically liftable, with additional cutoff on the chassis Brake system: * Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M * Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck * Aluminum air reservoir Tyres: * 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice TPMS: * Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit Mudguards: * According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t) * 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t) * 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t) Stake pockets: * 10 pairs of stake pockets inset in the outer frame * 6 pairs of stake pockets inset in the floor (on outer longitudinal beam) Removable stakes: * 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: * On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm Front wall: * Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate Floor: * Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lamps * Front white LED position lamps * Rear LED outline marker lamps * License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member Equipment: * Two wheel chocks with holders * Warning panel according to ECE 70 * Work light on lamp carrier (activated by reverse gear) * Bracket for rotating beacon at rear (including beacon) * 1 fixed access ladder on each side, including plug-in step assistance * Smart Board * Vehicle swing-out warning sticker & load center of gravity label Paintwork: * Chassis and front wall sandblasted and finished with high-quality coating * Chassis: hot-dip galvanized + RAL color of your choice * Front wall: RAL color of your choice * Front wall corner posts: ho

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3x 9t with air suspension; axle spacing 2 x 1310 mm; lift and lower valve; loading pressure gauge mounted on top of the tank; Wabco Smartboard; Wabco tire pressure monitoring system; first axle liftable, without tractor equipment, third axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, mounted on Alcoa Ultra One aluminum rims, 11.75x 22.5 ET 120 Ppsdpfx Aex Nuf Henxor Braking System: EBS 4S/2M WABCO pneumatic braking system with RSS, compliant with standard 98/12/EC - ECE R13/09; brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with pivoting foot Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the saddle plate on the frame, yellow side marker lights as required, rear position lights, front marker lights, rear license plate lights, all compliant with standard 97/28/EC-2007/35/EC, two multi-chamber rear lights at the turntable mounting, in aluminum brackets (compliant with 97/28/EC-2007/35/EC), two rotatable LED work lights top left and right of the tank, yellow warning beacon at the rear near the hose tubes, 2x reversing lights on the underrun protection, 2x reversing lights near the landing legs (each switchable from the energy console) Tank Construction: Horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, 35,000 liters volume, 24 months tank warranty from delivery, 2" kingpin as per standard 94/20/EC Operating Parameters: Pressure vessel per Pressure Equipment Directive PED 97/23/EC; wall thickness approx. 5 mm; test pressure 3.0 bar – operating pressure 2.0 bar; operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swing and folding dome covers; each cover sealed pressure-tight with 4 wing nuts; support for dome covers on top for storage; closed rain deflector at front, open at rear Material Discharge: 2 material discharge cones with synthetic fabric loosening inserts; individual discharge pipelines DN 100, steel, routed to the rear; 2 pinch valves DN 100 AKO in the pipes; DN 100 ball valve with ring jet nozzle at the end; remote control for ball valve and Storz A coupling at the end of the discharge line Air Piping: A 2.5" stainless steel air distribution pipe mounted on the right operating side; air line routed to the front, up to end of silo with check valve and DN 65 connection hose for compressor with Storz B coupling; the air distribution pipe features ball valves for top air, auxiliary air, and loosening; top air 2" at rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C at air pipe rear right; pneumatic connection with blow gun and spiral hose at upper walkway near climbing ladder; 1x vibrator on top of the tank; air line at walkway center top for cleaning with gun; air line in tool box below for cleaning with gun Ladder and Access Equipment: 1 aluminum ladder mounted at rear left of the vehicle; 1 pneumatic aluminum safety scissor railing with lock system acting on the brake; 1 aluminum safety walkway

Koşul: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Ppodpsx Nuf Tefx Anxsr Material Discharge: 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Koşul: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Pedpfxjx Nufmo Anxjpr Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle aggregates 3x 9t with air suspension, axle distance is 2 x 1310 mm, raise and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swing foot, rear without additional support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted ahead of the fifth wheel on the chassis beam, yellow side marker lights in prescribed quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/EC-2007/35/EC, 2 multi-chamber rear lights mounted at turntable height in aluminum consoles to standard 97/28/EC-2007/35/EC, 1 LED work light on the tank, yellow warning light at rear mounted at hose tube height, 2x reverse lights in underrun protection, 2x reverse lights at landing gear height (each switchable on the power console) Tank Assembly: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn) manufactured A single-compartment tank with a volume of 47,000 liters, tank warranty: 24 months from delivery Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/EC. The wall thickness is approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with pivoting and folding dome lids. Dome lids are pressure-tight with 4 wing nuts each, rubber supports above for dome lid storage, drip edge closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for loosening, discharge cone swivels to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Pneumatic Piping: A 2.5" stainless steel air manifold mounted on the right operating side, a stainless steel air distribution pipe 4" mounted at the rear of the tank, air valves (shut-off flaps) in INOX, air supply and connecting hoses in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the turntable Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail operable from below with separate folding ladder section, equipped with parking brake when open, 1 aluminum safety walkway led along the left top of the tank, anti-slip coating on the tank Hose Carriage: 4 hose tube compartments 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose compartment with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design, left

Koşul: yeni gibi (kullanılmış), makine/araç numarası: 122, boş ağırlık: 4.100 kg, azami yük ağırlığı: 13.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2025, yükleme alanı uzunluğu: 5.100 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 980 mm, yükleme alanı hacmi: 12 m³, süspansiyon: hava, lastik boyutu: 385/65 r 22,5, dingil mesafesi: 1.310 mm, Donanım: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Max. overall width 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle steel frame welded construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with crosswise safety feature Drawbar Equipment Cranked drawbar with height-adjustable heavy-duty bolt eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty couplings with coupling height (unladen) approx. 800 mm to max. 1,000 mm Support Device Front: 1 mechanical support winch with crank on the left in driving direction, manufacturer at factory’s discretion, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, axle load 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, brand at factory’s discretion (road tread) 4 steel rims 11.75 x 22.5, without offset, silver No spare tyre or spare rim(s) Brake System / Suspension Brake system according to EC directives 71/320 or ECE R13 dual-circuit pneumatic brake system Brake system brand Knorr EBS system 2S2M, 2nd axle sensed RSS – stability program Spring-loaded parking brake on 2nd axle Aluminium air reservoirs Brake/air connection lines with Duomatic quick couplings EBS/ABS connecting cable Hoses routed under drawbar Podpfx Anek Ttc Sjxjpr Electronic air suspension with automatic lowering via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/Safety Systems Axle load display via EBS CAN bus signal for display in cab Tipper Body Steel welded construction Fixed front steel wall 4 mm, approx. 980 mm high 2 access ladders inside and 1 outside on the front wall 5 mm special fine-grain steel floor plate (Slight floor corrugation possible due to welding distortion) 5 pairs of high-swing lashing rings 5 t (distance between rings approx. 2,320 mm) One-piece reinforced aluminium hollow section side panels 60/40 mm, approx. 980 mm high, foldable with extended swivel locks and spring lift assistance, additionally pendulum function Side panels left and right with manual central locking 2 rear corner posts at dropside height, fixed laterally Rear steel plate wall 4 mm (HB400), approx. 980 mm high, pendulum function with recessed bearing, hooks for metering chains (on rear wall and underside of body) Rear wall lock = automatic pneumatic lock 2 metering chains for pendulum rear wall With sealing strips Hydraulics Single-line system with hydraulic connection hose including plug coupling SVK DN13 Tipper press for 3-way tipping, initial lift capacity approx. 30 t; 1 safety cable Tarp Plastic roll tarp incl. aluminium bar with hand crank, side overhang approx. 400 mm, without customs lock, horizontal tarp bar rope lacing on the right in driving direction, front and rear zigzag lacing; stop bracket and lock for rolled-up tarp on the right in driving direction; holder for hand crank tarp fastening on left in driving direction with 2 tension straps incl. rubber pads and tension locks on the body

Koşul: yeni, azami yük ağırlığı: 43.929 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 16.690 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Donanım: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Lowbed Semi-Trailer, Extendable, with Wheel Recesses (NEW) --- Equipment & Highlights Technology & Structure Extendable lowbed semi-trailer with wheel recesses - External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading level - Overall width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles: first 2 rigid, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring as per R141 Ramps & Loading Area Folding 40-ton ramps - Ramp length: 2,750 mm; 850 mm width - Hydraulic sliding system - 45 mm hardwood floor + checker plate steel above wheel recesses - Wheel recesses incl. cover bridges - Excavator arm recess at the rear Load Securing Pjdpfox Efznox Anxspr Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on external frame/recess area - 5×2 stake pockets, stake dimensions 50×100 mm - Container locks for 1×20 ft or 1×30 ft Features & Comfort - 1x toolbox (700×400×360 mm) - Stake box - Rotating beacon - LED side lighting, LED work lights - Wheel chocks - Extension marker boards with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Color: RAL 9005 black --- Special features - New & available immediately - High payload, extremely flexible - Perfect for machinery transport, construction equipment, vehicles, etc. - Highly robust construction, premium BPW components For further information, please feel free to contact us.

Koşul: ikinci el, boş ağırlık: 7.920 kg, azami yük ağırlığı: 27.080 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.515 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.725 mm, yükleme alanı hacmi: 93 m³, toplam uzunluk: 13.600 mm, süspansiyon: hava, lastik boyutu: 385/55R22,5, dingil mesafesi: 7.900 mm, renk: siyah, vites türü: mekanik, Donanım: ABS, Lease rental without down payment, term of 72 months with final balloon payment Technical specifications Weights: - Fifth-wheel load: approx. 11,000 kg - Permissible axle load: approx. 24,000 kg - Permissible gross vehicle weight: approx. 35,000 kg - Unladen weight according to DIN70020: approx. 7,920 kg - Payload according to DIN 70020: approx. 27,080 kg Dimensions: - External dimensions (superstructure): approx. 13,600 x 2,550 mm - Platform dimensions: approx. 13,515 x 2,480 mm - Rear loading height unladen: approx. 1,142 mm - Clear tarp height at rear: approx. 2,725 mm - Clear tarp height at front: approx. 2,675 mm - Overall height at front unladen: approx. 4,033 mm - Overall height at rear unladen: approx. 4,017 mm - Usable volume: approx. 93.1 m³ - Fifth-wheel height (tractor): approx. 1,150 mm Chassis - Integrated chassis frame made of high-quality, painted fine-grained steel - Axles: 3 x 9 t axles with disc brakes Z 430 mm, for rims with 120 mm offset; axles center-aligned - Lift axle: automatic lift axle (third axle, rear), controlled via EBS with brake pedal function - First axle (front) with traction aid - Disc wheels: 6 x 11.75 x 22.5" on ALCOA aluminium rims - Tyres: 6 x 385/55 R 22.5, Continental HTR2 - Suspension: air suspension unit incl. lifting and lowering device - Braking system: electronic braking system EBS-Knorr according to DIN 7638, RSS active, with parking brake via spring actuator, brake connections in front panel - King pin: 2'' Jost, according to DIN and ISO 1726, replaceable from below - Landing gears: 2 mechanical 24 t telescopic landing gears with 2 speeds and balancing feet Ppodpfx Ajx Nbgkenxsr Floor: - In an aluminium frame resting on the longitudinal beams with 28 welded-in, closely ribbed aluminium I-crossbeams (100x100 mm). All I-beams are pre-drilled at regular intervals using a special jig before welding. Our patented special plastic substructure is then installed for guiding the moving floor profiles, attached with U-brackets. The moving floor profiles are then pulled into place by cable. With this substructure system, we achieve an absolutely ge...

Koşul: yeni, azami yük ağırlığı: 26.950 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı hacmi: 27 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.170 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer SKS Steel Semi-Round Tipper 27 m³ – Hardox – Electric Tarp Manufacturer: Kässbohrer Model: SKS B / 27 – 15 / 18 Registration: Germany Condition: New / To order --- Body & Specifications * Volume: 27.0 m³ * Permissible gross weight: 33,000 kg * Unladen weight: approx. 6,050 kg * Body length: 8,000 mm * Total length: 9,030 mm * Width: 2,550 mm * Height: 3,170 mm * Fifth wheel height: 1,220 mm --- Tipper Body & Materials * Steel semi-round body made from Hardox / HB450 * Plate thicknesses: * Floor: 5 mm * Sides: 4 mm * Front & rear: 4 mm * Rear tailgate sealed against slurry with rubber gasket and screw clamps * Additional mechanical tailgate * 5-stage HYVA tipping cylinder (250 bar) * Automatic safety brake when body raised * Tipping angle warning system Ppsdpfxsx I Twfo Anxsr --- Electric Tarp System * Electric tarpaulin system (650 g/m²) * Operated via push-button on the vehicle and remote control * Tarpaulin complies with fire protection standard ISO 3795 * Color: RAL 3002 Carmine Red --- Chassis & Technology * High-strength S700 MC steel chassis * KTL coating – 10 years corrosion protection * 2 BPW axles with disc brakes (each 9 t) * Lift axle, automatic & manual control * WABCO EBS 2S/2M with ABS & RSS * Electronic air suspension * WABCO Smartboard (axle load, brakes, tyres, fault indicator) --- Tyres * 385/65 R22.5 * Premium EU tires * Steel rims * M+S tires * Matching mudguards & splash guards --- Electrics & Safety * ASPÖCK Europoint III LED lighting * Rear LED work lamps * Aluminium side underrun protection * Steel rear underrun protection (ECE R58.3) * Tyre pressure monitoring system (TPMS) --- Additional Equipment * Body-Fix system (reduced vibration & noise) * Aluminium access ladder * Front document box * Kässbohrer logos on the sides & rear * Yellow / red coupling --- Colours * Chassis: MB 7350 Nova Grey * Tipper body: RAL 9005 Jet Black * Tarpaulin: RAL 3002 Carmine Red

Koşul: yeni, azami yük ağırlığı: 43.929 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 16.690 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Extendable Low Loader with Wheel Wells (NEW) — Equipment & Highlights — Technology & Bodywork • Extendable low loader with wheel recesses • Overall length: 13,190 mm, platform length: 9,240 mm + 3,500 mm extension • Platform height only 875 mm for low loading height • Overall width: 2,550 mm + 600 mm extension • Unladen weight approx. 14,071 kg • Permissible total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Ppedpox Ix Rqjfx Anxjr Chassis & Axles • 4 BPW axles: 2 fixed front axles, 2 rear trailing axles • Lift axle (automatic & manual) • Air suspension with load gauge • WABCO EBS 4S/3M, ABS & RSS • WABCO Smartboard (axle load, suspension, diagnostics) • 16x tyres 245/70 R17.5 (M+S & 3PMSF) • Tyre pressure monitoring system (compliant with R141) Ramps & Loading Area • Foldable 40-tonne ramps • Ramp length: 2,750 mm, width: 850 mm • Hydraulic sliding system • 45 mm hardwood floor + steel chequer plate over wheel arches • Wheel recesses and covering bridges included • Excavator arm recess at rear Load Securing • Extensive lashing points: • 2×2 lashing rings, 5,000 daN & 1×2 lashing rings, 10,000 daN on the gooseneck • 3×2 lashing rings, 5,000 daN & 4×2 lashing rings, 10,000 daN on the platform • 8,000–10,000 daN on external frame / wheel recess area • 5×2 stake pockets, insertable stakes 50×100 mm • Container locks for 1×20 ft or 1×30 ft Features & Comfort • 1× toolbox (700×400×360 mm) • Stake rack compartment • Warning beacon • LED side lighting, LED working lights • Wheel chocks • Extension marker boards with LED lighting • Standard 2" kingpin • Metallised chassis (Zn/Al 85/15) — excellent rust protection • Colour: Red — Special Features — • New & immediately available • High payload, extremely versatile • Perfect for transporting machinery, construction equipment, vehicles, etc. • Very robust construction, high-quality BPW components For further information, we are happy to assist you.

Koşul: yeni, azami yük ağırlığı: 29.260 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer SLAR3 Extendable Lowbed with Wheel Recesses Technical Data: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed trailer with wheel recesses, suitable for the transport of vehicles and heavy machinery. Dimensions * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Total width: 2,550 mm (extendable by 600 mm using side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm Psdpfxox Epaqs Anxjpr * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Capacities * Permissible total weight: * 52,800 kg at 60 km/h * 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tons per axle) * King pin load: 18,000 kg Axle Equipment * Number of axles: 3 (2 fixed at the front, 1 self-tracking at the rear) * Lifting axle: Manually load-dependent (1st axle) * Axle components: BPW axles with drum brake Tyres and Rims * Tyre size: 245/70 R17.5 * Tyre brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Improves fuel efficiency and extends tyre life * Number of rims: 12 pcs (steel rims with ET120 offset) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line compressed air brake from WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, ASPÖCK multi-chamber lamps, side markers and rear lights in LED * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² intermediate cables (3 m length) Ramps * Type of ramps: Foldable hydraulic drive-on ramps with sliding mechanism * Capacity: 40 tonnes * Ramp surface: Made of hardwood * Safeties: Ramp protection chain included Load Securing * Lashing rings: * 2 x 2 with 5,000 daN load capacity each * 1 x 2 with 10,000 daN on the gooseneck * 4 x 2 lashing rings with 6,000 daN capacity in the well area * Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and long-lasting * Flooring: 45 mm thick hardwood floor and steel floor with anti-slip structure * Wheel recess bridge: Bridges made of hardwood sections with steel supports for covering the wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallisation of the contact surfaces Condition New and immediately ready for operation. * Perfectly suited for heavy-duty transport and use in the construction industry or machinery relocation.

Koşul: yeni, azami yük ağırlığı: 37.619 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.240 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of manufacture: 2025 | NEW | 40-t ramps | Premium specification Location: Germany Condition: New / unused Availability: Immediate Description For sale: brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year 2025. Ideal for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – immediately ready for use. Technical Data Dimensions Total length: 13,190 mm * Platform length: 9,240 mm * Platform height: 875 mm * Total width: 2,550 mm (+600 mm with side extensions) * Gooseneck length: 3,950 mm * Unladen weight: approx. 10,381 kg Weights Perm. gross weight 80 km/h: 48,000 kg * Perm. gross weight 60 km/h: 52,800 kg * Total axle load: 30,000 kg * King pin load: up to 18,000 kg Chassis & Axles Ppsdpfx Anex Efzujxor 3 BPW axles, air suspension, drum brakes * 1 trailing axle at the rear * Lift axle (load-dependent + automatic in-cab control) * Tyres: 245/70 R17.5, M+S + 3PMSF * Tyre pressure monitoring R141 * Wabco EBS 4S/3M, ABS + RSS * Wabco Smartboard (axle load, suspension, diagnostics etc.) Ramps & Loading Area Foldable 40-t loading ramps * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * 45-mm hardwood floor + chequer plate above wheel arches Load Securing Multiple 8,000 daN and 13,400 daN lashing points * 7×2 stake pockets + plug-in stakes * Container locks for 1×20 ft * Front wall 450 mm, side & rear walls in aluminium Body & Chassis High-tensile S700 MC steel * Partially metallized (Zn/Al 85/15) – enhanced corrosion protection * Rear angle: 10°, 500 mm * 2" king pin * Mechanical landing legs at front * 45-t supports at rear Equipment 2× toolboxes * All-round beacon * LED lighting * Rear work lights * Wheel chocks * Extensions 9×2 (up to +300 mm) * Stake box * Reflective marking on sides & rear Colour: RAL 3020 Traffic red For further information, please feel free to contact us.

Koşul: yeni, azami yük ağırlığı: 22.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.472 mm, yükleme alanı yüksekliği: 2.970 mm, yükleme alanı hacmi: 99 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, Talson Clothing Mega Box Trailer TGG TAL 12/18 | 33 Pallets | LED | Code XL General Information: For sale is a Talson Clothing Mega Box Trailer TGG TAL 12/18, renowned for its robust yet lightweight aluminum construction. Ideal for textile transportation or volume cargo. High-quality workmanship, modern features, and brand-new condition. ----Technical Data---- * Vehicle Type: TGG TAL 12/18 * Brand: Talson * Registration Country: Germany * Unladen weight: approx. 7,200 kg (+/-3%) * Gross weight: 30,000 kg * Axle load: 18,000 kg * Kingpin load: 12,000 kg * Internal height: 2,970 mm * Internal length: 13,535 mm * Internal width: 2,472 mm * Overall height: 4,030 mm * External length: 13,710 mm * Volume: 99 m³ * Pallet capacity: 33 Euro pallets ----Chassis & Braking System---- * Frame: Semi-chassis made of high-strength ST52 steel * Axles: 2x BPW brand axles * Brakes: Disc brakes with Wabco EBS 2S/2M, ABS & RSS * Tire size: 445/45 R19.5 (premium tires with M+S marking) * Rims: Steel rims with offset * Spare wheel: available * Landing gear: 24 t load capacity ----Body---- * Self-supporting aluminum sandwich construction * Corrosion-resistant outer walls made of pre-painted aluminum sheets * Interior cladding of galvanized aluminum * Roof 23 mm thick, fiberglass reinforced with 4 LED roof lights * Double rear wing doors with lock * Front wall: 1.5 mm aluminum with omega profiles (impact-resistant) * 13 lashing rings according to EN 12640 * Rear ramp with double ramp support * Customs seal present ----Equipment & Extras---- * Lighting: - Aspöck Europoint 3 tail lights - 4x LED position lights front (white) Podpexrwzgofx Anxspr - 2x LED top lights rear (red) - 4x LED side marker lights (orange) - 2x license plate lights * Toolbox: Plastic 400×480×600 mm * Ramp holder: right side, dimensions 4470×1200 mm * Underrun protection: aluminum, compliant with UN ECE R58.3 * Mudguards: Anti-spray according to EU 109/2011 * Side marking: reflective according to UNECE R48 * Access ladder: foldable at rear * Load securing: Code XL (EN 12642) * Certificate: DVZ 2010 ----Colors & Materials---- * Body: RAL 9016 Talson White * Rear door: RAL 9016 Talson White * Chassis: hot-dip galvanized, corrosion-protected * Interior cladding: white * Profiles: anodized aluminum ----Features---- - 33 Euro pallet spaces - Lightweight, robust aluminum construction - Complete LED lighting - Load securing certificate Code XL - High-quality BPW axles - Ramp holder - Immediately ready for use For further information, please do not hesitate to contact us.

Koşul: yeni, azami yük ağırlığı: 22.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.472 mm, yükleme alanı yüksekliği: 2.970 mm, yükleme alanı hacmi: 99 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, Talson TGG TAL 12/18 – Mega Box Trailer – RAL 9005 Deep Black For sale: Two new Talson TGG TAL 12/18 clothing mega box trailers, model year 2025. These vehicles impress with their robust construction, high-quality materials, and large loading volume – ideal for textile or volume transport. Pedpfx Anjxpp Nwsxopr 2 units available immediately — General Information • Manufacturer: Talson • Type: TGG TAL 12/18 • Year of manufacture: 2025 • Registration country: Germany • Color: RAL 9005 deep black • Quantity: 2 units available — Dimensions • Total height: 4,030 mm • Internal height: 2,970 mm • External length: 13,710 mm • Internal length: 13,535 mm • Total width: 2,550 mm • Internal width: 2,472 mm • Volume: approx. 99 m³ • Pallet capacity: 33 Euro pallets — Weights • Gross vehicle weight: 30,000 kg • Axle load: 18,000 kg • Kingpin load: 12,000 kg • Unladen weight: approx. 7,200 kg (±3%) — Chassis / Axles • 2 BPW axles with disc brakes • WABCO EBS 2S/2M including ABS & RSS (UN ECE R13) • Mechanical suspension with "Reset to Ride" function • Tyres: 445/45 R19.5 M+S (premium tyres) • Steel rims with offset • 1x spare wheel carrier (basket design) — Body / Interior Fittings • Self-supporting aluminium sandwich construction, non-insulated • Side walls equipped with Talfix® system for flexible cargo securing • 27 mm strong, waterproof plywood floor (forklift capable up to 5,400 kg according to EN 283) • 13×2 lashing rings (according to EN 12640) • Roof with fibreglass-reinforced profiles and 4 LED interior lights • Double-leaf rear doors with double tube lock • Front wall: aluminium, interior 18 mm laminated wood • Cargo securing according to EN 12642 Code XL (VDI 2700) — Equipment / Details • LED exterior lighting (Aspöck Europoint 3) • Sockets: 2×7-pin + 1×15-pin (ECE R48 / ADR) • Ramp holders on the right, 4,470×1,200 mm • Aluminium rear underrun protection according to UN ECE R58.3 • Side underrun protection according to UN ECE R73 • Anti-spray mudguards in accordance with EU 109/2011 • Plastic toolbox (400×480×600 mm) • Access ladder on the rear • Chassis hot-dip galvanized and corrosion-protected For further information, please feel free to contact us.

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Semi-Trailer----Model: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring, first axle liftable without tractor unit equipment, third axle liftable with Wabco Optiturn. Ppsdpfx Anox Nufysxjr Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims, 11.75x22.5 ET120. Braking System: EBS 4S/2M WABCO compressed air brake system with RSS, compliant with standard 98/12/EC - ECE R13/09, brake pad wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t load capacity with swing feet. Electrical System: All lighting in LED version, 24 Volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis support, yellow side marker lights in prescribed quantity, rear position lights, front marking lights, rear license plate lights, lamps according to 97/28/EC-2007/35/EC standard, two multi-chamber lights at the rear in aluminum brackets at the kingpin level per 97/28/EC-2007/35/EC, two rotating LED work lamps mounted top left and right on the tank, yellow warning beacon at the rear at hose pipe height, two reversing lamps in the underrun protection, two reversing lamps at the support height (each switchable on the control console). Tank Construction: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank with 35,000 liters capacity. Tank warranty: 24 months from delivery. King pin 2'' in accordance with 94/20/EC. Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/EC. Wall thickness approx. 5 mm. Test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C. Filling Options: 3 manholes DN 450 with hinged and folding domed covers. Each dome cover is pressure tight with 4 wing nuts. Support for dome covers on top for stowage. Rain guard front closed, rear open. Material Discharge: 2 material discharge cones with synthetic fabric aeration inserts. Individual discharge lines DN 100, steel, combined to the rear. 2 pinch valves DN 100 AKO in the pipelines. Final ball valve DN 100 with ring jet nozzle. Remote control for ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5'' stainless steel air manifold installed on the operator's side (RIGHT). Air line leads to the front, to the end of the silo, with check valve and connecting hose DN 65 for compressor with Storz-B coupling. Ball valves for upper air, auxiliary air, and aeration are on the air manifold. Upper air 2'' at the rear right. PRESSURE LINE INLET REAR RIGHT. External air connection Storz C at the air pipe at rear right. Pneumatic connection with air blow gun and coiled hose at the top walkway area by the access ladder. 1x vibrator on top of the tank. Air line top center on walkway for cleaning with air gun. Air line in lower stowage box for cleaning with air gun. Ladder and Access: 1 aluminum ladder mounted rear left on the vehicle, 1 pneumatic aluminum safety scissor railing with brake-actuated locking system, 1 aluminum ... (text ends here)

Koşul: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Psdpox Nugdsfx Anxepr Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Material Discharge: 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Koşul: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" king pin Tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle assemblies with air suspension, axle spacing 2 x 1,310 mm, raise and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice on Alcoa Dura-Bright aluminum rims in 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE – ECE R13/09, brake pad wear indicator connected Podpfex Nuftex Anxjpr Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24-volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights fitted at the pivot height in aluminum brackets according to 97/28/CE-2007/35/CE, 1 LED work light on the tank, yellow warning light at the rear mounted at hose tube height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each switchable on the power console) Tank Version: One horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank with 47,000-liter capacity, tank warranty: 24 months from delivery Operating parameters: Pressure tank according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40°C to +80°C Filling Options: 4 manholes DN 450 with pivoting and foldable dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber support for dome covers on top for storage, rain cover closed at the front-open at the rear Material Outlet: 1 material discharge cone DN 800 made from INOX, foldable with INOX disc for loosening, material discharge cone laterally pivoting, DN 150 shut-off valve with white gasket, connection: STORZ-A Air Piping: A 2.5" stainless steel air manifold mounted on the right operation side, a 4" stainless steel air distribution tube mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connecting hoses with 2" STORZ couplings, micron filter, vacuum valve at the top of the tank, 1x vibrator 1 m before the pivot point Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor rail can be erected from below with a separate ladder folding part, equipped with locking brake when open, 1 aluminum safety grating leading along the left upper side of the tank, anti-slip coating on the tank Feed Hose Holder: 4 hose tube holders 5 m long DN 200 in aluminum with 4 hoses DN 100 and STORZ couplings, hose holder with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Koşul: ikinci el, azami yük ağırlığı: 35.840 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 02/2026, Donanım: ABS, Extract from the equipment list. Complete specification available on request. Chassis - Configuration for the transport of containers: 45', 40' HC, 30', 20' center, 20' rear, 2x20', 40' ISO - Frame adaptation for a 40' ISO container - Rear pneumatic extension with an additional mechanical locking pin - Container Master 45' R2 - Extendable bumper - Steel underrun protection Axles and Suspension - SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC KNORR clamps - Brake disc diameter 430 mm - Rigid axles - Approx. 1,090 mm fifth wheel height unladen - 1 lift axle Landing Legs - JOST two-speed landing gear Tyres/Rims - BRIDGESTONE 385/55 R22.5 DURAVIS R002 3PMSF (B-B-70) - 6 pcs, Rolling resistance: B, Wet grip: B, Rolling noise: 70 dB - Without spare tyre - 6 steel rims, 22.5-11.75 ET-120 - Wheel nut protection caps, no spare rim Braking system/Pneumatics - Steel air tanks - Braking system as per manufacturer's choice with Basic Modulator with RSS/RSP Electrics - Socket: 1x 15-pin and 2x 7-pin with EBS connection, without connecting cables to the tractor unit Lighting - Partial LED Aspöck-EUROPOINT III - LED license plate lighting - LED outline marker lamps - LED side marker lamps Other Chassis Equipment - Full-size mudguards with splash guard behind the third axle - Full PVC mudguards - Without spare wheel carrier and winch - Key for container locking Podpfx Aew Ak A Uonxspr - Frame adaptation for transport of ISO 40' containers (flat floor without tunnel) - 2 adapters and 2 spacer supports - No toolbox Chassis Painting - KTL coating - Chassis painted RAL 7021 (black grey)

Koşul: yeni, azami yük ağırlığı: 39.850 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment specification. Full specification available on request. Chassis: * Welded construction made from high-grade steel profiles with punched profile cross members * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting bracket at front for customer-side installation of a support device, approx. 90 x 90 x 4 mm Coupling gear: * 2-inch kingpin (also suitable for 3.5) Underride guard: * According to EC standards, bolted version Side underrun protection: * According to EC standards Landing legs: * 24 t landing legs, single-sided operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle assemblies, brand of our choice, disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel connection, 10 holes with ET 120 * Total air suspension lift approx. 200 mm, comprising lift approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent function, with RTR function * Switch for second driving height (+ approx. 50 mm) on the lift/lower device bracket * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via push button in the cab (15-pin socket PIN12). Push button in the cab not included in scope of delivery Brake system: Brand of our choice * Dual-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads fixed to the front cross member, without connecting line to the truck Tyres: * 6x, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), ET 120 * Basic version of tyre pressure monitoring, connected to EBS CAN bus system * Tyre pressure display in cab (pre-installation by truck manufacturer) Mudguards: * According to EC standards, PVC mudguards (half-shells) over all axles * Mud flaps with anti-spray Load securing: * 8 pairs of hook plates welded into outer frame (lashing capacity approx. 3 t) * 6 pairs of lashing rings on the side in the outer frame, evenly distributed (lashing capacity approx. 10 t) * 13 pairs of lashing eyes (U-rings) in the outer frame (tested lashing capacity approx. 2.5 t per lashing point) Stanchion pockets/stanchions: * 5 pairs of stanchion pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stanchion pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stanchions made of galvanized square tube, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: * Bolted front wall, approx. 1,200 mm high, clad with approx. 5.5 m sheet metal Stanchion magazine: * Inside at the front wall, magazine for plug-in stanchions Floor: Ppjdewx Dbpepfx Anxsr * Approx. 28 mm hardwood floor recessed in outer frame, with galvanized omega-steel profiles Lighting system: * According to EC standards, 24 Volt with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate illumination * 1x 15-pin and 2x 7-pin connectors on front cross member Equipment: * Wheel chock with double holders * Warning sign according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for rotating beacon at rear (incl. rotating