Kullanılmış Rss Transportbanden satın al (158)

Durumu: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with punched-through cross members, designed for high point loads * Underride protection nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at front approx. 130 mm Coupling Device: * 2" kingpin Rear Underride Guard: * Bolted version, compliant with EU regulations Side Underrun Protection: * EU-compliant, made of anodised aluminium profiles Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation, positioned front right Axles: * 3 x 9 t air suspension axle assemblies * 22.5" disc brakes * Total lift approx. 180 mm * Lifting and lowering device via rotary slide valve Braking System: * Dual-circuit compressed air braking system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Reversal-proof coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards: * EU-compliant Spare Wheel Holder: * Not included Load Securing: * 9 pairs of folding lashing rings, evenly spaced, traction approx. 5.0 t * 9 pairs of folding lashing rings, evenly spaced, traction approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching tie-down straps Front Wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanised omega steel profiles Lighting System: * EU-compliant, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights front white * LED outline marker lights rear * Number plate lights * Lane assist LED lights * 1x 15-pin and 2x 7-pin connectors on front crossmember Equipment: * 2 chocks with holders * ECE 70 warning plates * Holder for rotating beacon incl. rotating beacon * 2 rubber bump stops at rear * Rear right access ladder, foldable and extendable (without platform) * 1 open box made of perforated sheet metal, lateral to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, positioned behind the axles Ncedpfx Aougqvfeiqsr Paintwork: * Front wall: single colour RAL as desired * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single colour RAL as desired * SSV: Aluminium anodised * Underride protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver * Contour marking: complete yellow Including Special Equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion sockets in the outer frame, evenly distributed * 4 rows of stanchion sockets across the load area * 20 pieces of stanchions made from galvanised tube 80/50, total length approx. 1,200 mm * Magazine inside front wall for 20 plug-in stanchions * Container locks for 1 x 40' as well as 2 x 20' containers, flush at rear * Container lock for 1 x 20' container central position * Work spotlight on lamp bracket (activated by reverse gear) * 2 stainless steel toolboxes, approx. 600x500x50

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 40 m³, Donanım: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, starting aid and electric actuation, raise/lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with single-sided operation, brake system according to E.E.C. standard, dual-line Westinghouse system, spring brakes acting on two axles, EBS electronic braking system from Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per Road Traffic Licensing Regulations (StVZO) with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, hydraulics by Edbro incl. approx. 2 m hydraulic hose, 6 PVC mudguards with rubber splash flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber gasket, spindle locks on the rear door, prepared for vibrating plate installation, mud-proofed! ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +590¤ delivery charge Ncjdpfxeu Dvw Es Aiqjr *Pictures and offers are subject to change*

Durumu: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Hydraulic System Tipping Cylinder with Large Casing Ncsdpfx Asfi Nmuoiqer Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Durumu: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Njdpfx Aefi Nmpjiqecr Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Ncsdpfsgcw Riex Aiqsr Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 47 m³, Donanım: ABS, Tipping semi-trailer with ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 t axles with air suspension, 1st axle lift with starting aid and electric activation, raising and lowering valve for air suspension, Wabco SmartBoard, brake wear indicator, 6 wheels with 385/65 R22.5 size tires mounted on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gears with single-sided operation, braking system compliant with EEC standards, dual-circuit system, spring actuators operating on two axles, and Wabco EBS electronic system with RSS (Roll Stability Support), aluminum air tank, electrical system in accordance with StVZO with 2 Aspöck five-chamber tail lights, 24 volt system, aluminum tipping body, Edbro hydraulic system with about 2 m hydraulic hose, 6 PVC mudguards with rubber splash guards, lateral underrun and side impact protection, catwalk on the chassis, fully welded, long-life rubber seals, spindle locks on the rear door, body optionally also available mud-tight! Combination tail door split 2/3–1/3 with grain slider and automatic pneumatic locking. ADDITIONAL EQUIPMENT AVAILABLE ON REQUEST COLOR OPTION FREELY SELECTABLE Nodpeu Dvw Sofx Aiqecr +590€ transfer costs Also available in models Z9–Z13 *Pictures and offers are non-binding*

Durumu: yeni, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, toplam yükseklik: 1.180 mm, Donanım: ABS, Availability: Immediate NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth wheel load: 15,000 kg # Coupling height: 980 mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support legs, 24t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connectors # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 branded tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor Njdpfx Aevm Nm Isiqecr # Oversize transport kit (4x galvanised oversize signs with LEDs + 1x revolving warning beacon) # 2 stainless steel toolboxes, mounted on the right & left in direction of travel # 6x2 Jost retractable container locks # Stake holder mounted on front wall + 20 stakes (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in frame # 7 x 2 lashing rings, 4t each, on platform; 108 lashing points in the outer frame, 2t each # 600mm high drop sides, removable including compartment under the vehicle # Chassis KTL-coated and painted in RAL 3020 # Front wall RAL 3020 ----Subject to errors, changes and interim sale! Location: KTH-Trailer GmbH in Goch

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2020, Pacton Mega Curtain Side Trailer | 5 Ton Tail Lift | Rear Doors Axles and Tires: Axle 1: BPW disc brakes Tire size 455/40-R 22.5 tread left: 58% right: 31% Axle 2: BPW disc brakes Tire size 455/40-R 22.5 tread left: 71% right: 85% Axle 3: BPW disc brakes Tire size 455/40-R 22.5 tread left: 42% right: 62% Key Specifications: Internal length: approx. 13,620 mm Internal height: approx. 2,960 mm Overall height: approx. 4,030 mm Width: 2,540 mm Fifth wheel height: approx. 950 mm Chassis: Flat chassis with I- and U-beams, reinforced for forklift load capacity Axle Set & Braking System: 3x BPW Eco Air Compact disc brake axles, 9 ton technical axle load each Air suspension with lift/lowering function Wabco EBS system with ABS (2S/2M) and RSS roll stability system Tail Lift: Dhollandia DH-LSU-50, 5,000 kg capacity Rear-mounted, positioned behind the rear doors Platform dimensions: approx. 2,500 x 2,520 mm Hydraulic support legs, control from outside and via pendant inside Body: Sliding roof with Kevlar aramid roof tarpaulin (Carapax), both front and rear retractable Pacton sliding stanchions, 3 per side, movable with plank holders 4 rows of wooden side planks, adjustable at various heights or stackable up to 3 high Strongline XL rear frame with aluminium doors, stainless steel door retainers Front wall with impact plate and coupling panel for air/electric Wheels & Tires: 6 steel rims 455/40 R22.5 tires Fully equipped with plastic fenders and Pacton anti-spray mud flaps Lighting: Complete LED lighting (Aspöck): Ncodpfx Ajxl Eqijiqer 3-chamber rear lights, marker lamps, fog lamp, license plate lights 4 work lights, 8 side marker lamps, rear rubber stalk lamps