Kullanılmış Cometa Durkopp Adler Vbo satın al (273)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Lehrte
2.437 km
Itfaiye aracı
MERCEDES-BENZSprinter 519 / ATM 0km 4x on Stock
Ara
Durum: ikinci el, kilometre: 251.000 km, güç: 140 kW (190,35 bg), ilk tescil: 04/2018, yakıt türü: dizel, toplam ağırlık: 4.800 kg, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, koltuk sayısı: 5, toplam yükseklik: 2.850 mm, Üretim yılı: 2018, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, merkezi kilitleme, park ısıtıcısı, RTW 519 WAS Box Body Year 2018
Internal No: Fz 009
With a brand-new original Mercedes replacement engine (with original Mercedes warranty) and overhauled transmission. The vehicle is in as-new condition, fully rebuilt with absolutely all wearing parts replaced.
Rsdpok Iyvnefx Aktew
4 units in stock, immediate delivery / Status 04/2023
These vehicles come with a 12-month warranty, which can be optionally extended up to 36 months.
MB Sprinter Ambulance to DIN EN1789 / DIN EN 13500
Sandwich panel body including auxiliary hot water heater, etc.
* Sandwich aluminum construction
* Rear portal: work lights, reversing camera
* Vehicle lights and strobe lights
* Rear of vehicle featuring a sprung ram protection step
* Ceiling lighting center, patient compartment flooring, door design, pull-out cabinets, compressor fridge, flap-mounted equipment holders, oxygen piping, blue light system, CAN bus central electrics, external compartment and interior lighting—all per standard EU ambulance configuration
* Every stretcher mounting system can be adapted and installed
Vehicle is in excellent, ready-for-operation condition / Fully reconditioned, no dents or scratches / Stretcher available at additional cost / ABS + ASR, ESP / 2x Airbag / electric side mirrors / electric windows / 2x battery 12 V 88 AH / engine pre-heating / auxiliary heater / power steering / reinforced stabilizer / tachograph / air conditioning / immobilizer / rear work light, external 220V connector / fire extinguisher / center armrest / reversing camera / reading lamp / pre-fitted radio equipment / optical signal system / LED lightbar and front strobes, acoustic siren system.
Financing or leasing options available!
All our used special vehicles are thoroughly inspected, refurbished, and serviced by an experienced team of special vehicle technicians to ensure that a TÜV or DEKRA seal is as much a given as the immediate operational readiness of all ambulances.
Vehicle is almost like new!
We provide a 12-month warranty on this ambulance!
Sale without medical and technical equipment, but these can be purchased separately.
Our Service—For You!
* 20-40 immediately available ambulances always in stock
* DEKRA or TÜV certificate available on request
* FINANCIAL SERVICE—Financing, leasing, or hire-purchase tailored to your needs
* WARRANTY—up to 36 months available at extra charge
* Replacement vehicles for accidents in stock
* RECONDITIONING—All vehicles are professionally prepped and refurbished by our team
* More vehicle offers and services at:
We look forward to your call—the G&G team is always at your disposal.
We speak Italian, English, Polish, and Spanish and can certainly help if you are looking for a good quality used ambulance.
This ad serves as a preview of our vehicle and is not part of a sales contract. Information provided on the internet constitutes non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to change and prior sale!
Küçük ilan
Prigorje Brdovečko
1.772 km
Pinyon ve dişli asansörü
GEDA500 Z/ZP
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2016, 🚀 GEDA 500 Z/ZP – VERTICAL HOIST / TRANSPORT PLATFORM
Used, 2016 – Fully serviced in GEDA Germany – many new parts!
Warranty: ORIGINAL FACTORY – 12 months
🏗️ FOR TRANSPORT OF PERSONNEL AND MATERIALS – PROFESSIONAL SOLUTION FOR CONSTRUCTION SITES
The GEDA 500 Z/ZP is a dual-purpose solution: can be used as a material hoist or as a transport platform for carrying personnel and freight.
Thanks to its dual control system, it offers maximum flexibility, safety, and operational speed.
Lifting speed up to 24 m/min in material mode and 12 m/min in personnel mode ensures efficient and safe work even on the most demanding projects.
Compact design, spacious platform, and the ability to customize make this model ideal for scaffolding installation and high-rise construction.
⚙️ TECHNICAL SPECIFICATION
Manufacturer: GEDA (Germany)
Model: 500 Z/ZP
Year of manufacture: 2016
Warranty: 12 months (fully refurbished and serviced by GEDA Germany)
Many new parts
Drive: 3.0 / 6.1 kW / 400 V
Lifting height (max): 100 m
Load capacity: 850 kg (materials) / 500 kg (persons)
Lifting speed: 24 m/min (materials) / 12 m/min (persons)
Platform dimensions: L 1.6 m × W 1.4 m × H 1.1 m
Mast system: GEDA UNI-X-MAST
Condition: technical and visual – EXCELLENT
Rsdjxvyi Uepfx Aktew
🧰 ACCESSORIES FOR LIFTING HEIGHT UP TO 25 m
Accessories for greater heights available upon request.
Steel mast sections 1.5 m – 17 pcs
Mast wall ties – 6 pcs
Cable guide rollers – 6 pcs
Lifting cable for up to 50 m lifting height
All hoists are serviced and refurbished in Germany, ready for operation and delivery.
+++ EACH GEDA 500 Z/ZP COMES WITH THE ORIGINAL FACTORY INSPECTION CERTIFICATE +++
💡 ADDITIONAL INFORMATION
✅ 12-month warranty from the date of purchase
✅ GEDA quality and safety certificate
✅ Manuals available in Croatian, German, and English
✅ 90° swiveling platform – easier loading/unloading
✅ Minimal space requirements and quick assembly
✅ Various platform versions – with gates and folding mechanisms to suit every site
🆕 WE ALSO OFFER NEW GEDA HOISTS AND COMPLETE EQUIPMENT
In addition to used models with warranty, we also offer new GEDA hoists, transport platforms, and accessories:
Hoists for materials and personnel
Vertical and inclined construction lifts
GEDA-STANDARD 200KG, COMFORT 250KG, AND FIXLIFT 250KG – 2 LIFTING SPEED OPTIONS
All new and refurbished used GEDA hoists come with a full manufacturer’s warranty, available for immediate delivery with support and service in Croatia.
DIRECT SALES – GENERAL REPRESENTATIVE FOR GEDA HOISTS IN CROATIA FOR OVER 30 YEARS.
Specialized in sales, rental, service, and refurbishment of GEDA lifts, hoists, and complete equipment.
Küçük ilan
Letonya
2.123 km
Ramöz buhar makinesi (stenter STEAMER)
ZimmerThermocure UHD 3 Universal Loop Steamer
Ara
Durum: ikinci el, Üretim yılı: 2005, son revizyon yılı: 2011, RÄUMUNGSVERKAUF
Rjdpfx Asy A S Uxsktsw
DIE MASCHINE WIRD AN DEN HÖCHSTBIETENDEN VERKAUFT – 'FIRST COME - FIRST SERVED'; SOFORTIGER VERSAND MÖGLICH
Liste weiterer Maschinen aus derselben Spinnerei auf Anfrage verfügbar.
Textildampfer / Ager BAUJAHR 2005, nur wenige Jahre verwendet! Anschließend konserviert und eingelagert.
Hersteller: Zimmer
Typ: Thermocure UHD 3 Universal-Loop-Steamer
Für den Betrieb mit Sattdampf 102–104 °C
Mit Hochtemperaturdampf max. 185 °C
Mit Heißluft max. 170 °C
Baujahr: 2005
Maschine wie neu, nur wenige Jahre im Einschichtbetrieb genutzt, seit 2011 konserviert
Technische Daten:
Maximale Warenbreite: 200 cm
Maximaler Wareninhalt: 240 Meter
Schlingenlänge: max. 2,8 m
Geeignet für Gewebe oder Maschenware – Einfachbreite
Max. mechanische Geschwindigkeit: 5–50 m/min
Verweilzeit Dampf: 5–40 Minuten
Heizmedium: Sattdampf: min. 3 bar, max. 8 bar
Durchschnittlicher Dampfverbrauch: ca. 500–1000 kg/h
Heizmedium für Hochtemperaturbetrieb: Thermoöl, 280 °C, 12 m³/h, ca. 280 kW
Netzspannung: 3 x 400 V, 50 Hz
Steuerspannung: 230 V, 50 Hz
Elektrische Antriebs- und Ventilatorleistung: ca. 28 kVA
Druckluft: ½“, 6 bar
+
Thermoöl-Heizanlage für Hochtemperatur-Dampfbetrieb, Typ HEIZA
Typ: HW-S-02/K mit Weishaupt-Brenner, Gasfeuerung
MASCHINE WURDE ÜBERHOLT, PROFESSIONELL GEKENNZEICHNET, DEMONTIERT, LAGERT AUF SPINNEREIBODEN – DETAILIERTES VIDEO VERFÜGBAR
Für weitere Informationen, technische Details, Fotos oder Videos kontaktieren Sie uns bitte. Versand sofort möglich.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Cadolzburg
2.254 km
Çekici
IVECODaily 35S18 HA8 V Navi*LED* Automatik BJ 26-Sofo
Ara
Durum: yeni, kilometre: 10 km, güç: 129 kW (175,39 bg), yakıt türü: dizel, vites türü: otomatik, toplam ağırlık: 3.500 kg, yükleme alanı uzunluğu: 4.950 mm, yükleme alanı genişliği: 2.110 mm, renk: sarı, koltuk sayısı: 3, Donanım: ABS, elektronik denge programı (ESP), klima, merkezi kilitleme, navigasyon sistemi, Welcome to carmax24
Today you have the opportunity to purchase one of our carefully selected and inspected vehicles. Expertly checked and high-quality vehicles have ensured a high level of customer satisfaction since 2008. This is our daily commitment because, at carmax24, you as the customer always come first.
Iveco Daily 35S18HA8, Euro VI E, 176 HP, 3.0 Diesel, 8-Speed Automatic Transmission – New Model
Technical Data:
* Type: 35S18A8H
Rodpfxjzah Rps Aktew
* Engine: Euro VI E, 176 HP
* Displacement: 3.0 l
* Transmission: Automatic gearbox
* Wheelbase: 4,100 mm
* Paint code: Yellow
* Gross Vehicle Weight: 3,500 kg
* Vehicle Type: Truck
* Additional: Rubber floor mats
Factory Installed Special Equipment:
* 00344 – Rear View Camera
* 05925 – Additional, adjustable, and selectable speed limiter
* 07629 – Without acoustic reversing warning signal
* 00744 – Window in the cab rear wall
* 06064 – Reinforced double parabolic springs at the rear (for S models)
* 08628 – Overhead storage above windshield
STYLE PACKAGE 3.5 S:
* 79336 – Daily radiator grille with chrome strips
* 01553 – Badges in "Gun Metal"
* 02443 – Leather steering wheel
* 02308 – Daily aluminum wheels
* 72625 – Full LED lighting (daytime running lights, low beam, high beam)
COMFORT PLUS PACKAGE:
* 00259 – Air-suspended comfort driver's seat with lumbar support and armrest
* 01611 – USB ports (A + C) for driver and front passenger
* 75082 – Double passenger bench with folding table and 3-point seat belts
* 07196 – Air conditioning compressor 170 cm³
* 01605 – 'NAVI MY IVECO' infotainment system with 10" display
* 14522 – Adaptive cruise control (ACC) with radar sensor
* 06650 – Automatic air conditioning and heating system
* 79297 – Comfort headrests with memory foam and Daily logo
Bodywork Specifications Platform:
* Dimensions: approx. 4900 mm x 2100 mm
* Single cab
Superstructure Design:
* Aluminum frame made of welded special profiles
* Loading area made of non-slip, perforated aluminum plates
* Openings reinforced with stainless steel inserts
* Loading ramps made of aluminum (340 mm wide, 2500 mm long)
* Ramps drawer-mounted, adjustable over the entire width
* Central locking for loading ramps
* Movable winch frame
* Simple bicycle protection cover
* Mudguards with mud flaps (2 pcs)
* Trailer coupling + second coupling with socket
* Toolboxes (500 mm – 2 pcs)
* Painted side panels, railing, and rear panel
* Reinforced edges with aluminum angles
* Additional lashing points (8 pcs)
Electrical System:
* Rear lights mounted to the vehicle frame
* LED side marker lights (orange, 6 pcs)
* LED position lights (white/red, 2 pcs)
* Trailer sockets (2 pcs, 13/7-pin)
* Work lights H3 front (2 pcs)
* Main battery disconnect switch
Additional Options:
* Electric winch SUPER WINCH TS9500 (4.2 t)
* High front railing
* Yellow LED warning light bar
* Additional working light LED
Our special service for you:
* Service book maintenance at authorized partners and master workshop
* Winter tires available at extra charge
* Warranty insurance up to 36 months available at extra cost
* We are happy to accept your used vehicle as trade-in and offer fair valuation!
* Financing starts at 6.99% with or without down payment, up to 96 months (subject to credit approval)
* TÜV/DEKRA main and emissions inspection
Küçük ilan
Babenhausen
2.402 km
Karıştırma ve çırpma makinesi
RegoSM 4
Ara
Durum: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, son revizyon yılı: 2026, giriş voltajı: 400 V, DGUV onaylı - geçerlilik tarihi: 06/2027, toplam uzunluk: 750 mm, toplam ağırlık: 285 kg, toplam genişlik: 640 mm, toplam yükseklik: 1.650 mm, elektrik sigortası: 16 A, giriş frekansı: 50 Hz, boş ağırlık: 285 kg, Rego SM 4 RMT Whipping Machine, Refurbished
Rego Model: SM 4 RMT, refurbished
Mixer with automatic timer
The machine when it comes to whipping tasks!
2 operating functions: 1 x mixing / 1 x whipping
Working shaft/mixing shaft newly overhauled
Powerful and robust technology
Redpsxiu Hzsfx Aktow
Bowl lighting, timer switch
Connection: 400V, 16A-CEE plug
Used machine, refurbished
with warranty + spare parts service
Quality from a specialist company!
Benefit from over 35 years of experience!
Optionally available:
Additional accessories
Ring gas burner
New bowl
New whisk or mixing paddle
Revolving ring / bowl ring
Maintenance contract
Service package
Delivery service
Training & commissioning
Come visit us!
Küçük ilan
Hambach
2.502 km
Enjeksiyon kalıplama makinesi
KraussMaffeiKM2300 14700MC
Ara
Durum: ikinci el, Üretim yılı: 1998, çalışma saatleri: 101.215 h, makine/araç numarası: 23J01415, sıkıştırma kuvveti: 23.000 kN, enjeksiyon ağırlığı: 6.100 g, toplam uzunluk: 4.500 mm, toplam yükseklik: 3.800 mm, toplam ağırlık: 205.000 kg, Two powerful injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, engineered for the production of large-volume plastic parts and series industrial manufacturing.
Each unit provides a clamping force of 23,000 kN and features a screw diameter of 105 mm as well as a maximum shot weight of 6,100 g, making them particularly suitable for applications requiring large components and high material throughput.
Both machines come equipped with extensive peripheral technology, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and blending system. A belt conveyor is part of the scope of delivery.
Manufactured in 1997 and 1998, both machines have been operated in an industrial production environment.
Technical data:
Machine 1
* Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6)
* Year of manufacture: 1998
* Operating hours: approx. 101,215 h
Machine 2
* Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9)
* Year of manufacture: 1997
* Operating hours: approx. 99,030 h
Shared technical specifications:
Redpoyt Hidsfx Aktjw
* Clamping force: 23,000 kN
* Screw diameter: 105 mm
* Maximum shot weight: 6,100 g
* Machine weight: approx. 205,000 kg
* Machine dimensions:
* Depth: approx. 4,500 mm
* Height: approx. 3,800 mm
These machines provide a solid and proven solution for industrial plastics processing and are especially attractive for companies requiring large-scale injection molding capacity.
Küçük ilan
Dortmund
2.561 km
Standart çekici ünitesi
DAFXG 530 6X2 FTG - MX + Navi + VA 8t Luft
Ara
Durum: yeni, kilometre: 11 km, güç: 390 kW (530,25 bg), yakıt türü: dizel, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, Üretim yılı: 2026, Donanım: elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, Additional options and accessories
Superstructure
* Spoiler
Lighting
* Headlight type: LED
Interior
* Heated seats
* Electric mirror control
* Reversing system (rear-view camera)
* Stationary air conditioning
* Tachograph: digital
* Central locking system
* Air-suspended seat
Engine
* MX engine brake
* Number of fuel tanks: 2
* Capacity of second tank: 325 l
Safety systems
* ESP (Electronic Stability Program)
* Lane departure warning
* Forward collision warning system
Further information
General information
Cab: XG
Rodpfx Akjy Halyotew
Transmission
Gearbox: Automatic
Axle configuration
Brakes: disc brakes
Suspension: air suspension
Front axle: Tyre size: 385/65 R22.5, steering
Rear axle 1: Tyre size: 385/55 R22.5, lift axle, steering
Rear axle 2: Tyre size: 315/70 R22.5
Dimensions
Wheelbase: 415 cm
Cabin
Number of seats: 2
Number of berths: 2
Company information
We are proud to be the largest German DAF dealer, offering the full product range of the Dutch manufacturer in the Ruhr Area and Cologne region, and to contribute to this success. Our goal is to relieve you as much as possible of everything related to vehicles and your daily business—be it the product itself, the related services, or, last but not least, our personal interaction. Be convinced by our consulting and service. Our team is at your disposal.
With four centrally located branches, we cover a large part of North Rhine-Westphalia and are quickly accessible for you. We are glad to come to your premises, or you can visit us at our sales locations in Dortmund or Cologne. We always have a large selection of new vehicles available for immediate delivery—our new vehicle stock alone comprises 70 to 100 trucks at any given time, a real highlight in the market.
Visit us at [website] or call us at [contact number].
Küçük ilan
Dortmund
2.561 km
Değiştirilebilir kasalı kamyon
DAFXG 480 6X2 FAN - MX + Exclusive - BDF Maxi 1020
Ara
Durum: yeni, kilometre: 11 km, güç: 353 kW (479,95 bg), yakıt türü: dizel, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2025, Donanım: elektronik denge programı (ESP), klima, navigasyon sistemi, Additional options and accessories
Lighting
* Headlight type: LED
Interior
Rodpfexuckxsx Aktew
* Heated seats
* Electric mirror adjustment
* Rear view system
* Stationary air conditioning
* Tachograph: digital
* Central locking
* Air-suspended seat
Engine
* AdBlue
* MX engine brake
* Number of fuel tanks: 2
* Fuel tank capacity tank 2: 620
Safety systems
* ESP
* Lane departure warning
* Forward collision warning system
Further information
General information
Cab: XG
Drivetrain
AdBlue system: Yes
Transmission
Transmission: 12-speed automatic
Axle configuration
Brakes: disc brakes
Front tyre size: 315/60 R22.5
Rear axle 1: Tyre size: 295/60 R22.5
Rear axle 2: Tyre size: 315/60 R22.5, lift axle, steered
Dimensions
Wheelbase: 505 cm
Interior
Number of seats: 2
Number of beds: 2
Dealer information
As Germany’s largest DAF dealer, we are proud to offer the full product range of the Dutch manufacturer in the Ruhr and Cologne regions, and to contribute to this success. Our aim is to relieve you as much as possible of tasks related to your vehicles and daily operations — from the product itself and associated services to personal advice and support. Let our professional advice and service convince you. Our team will be happy to assist you.
With our four centrally located branches, we cover a large part of North Rhine-Westphalia and are quickly accessible for you. We can come to you, or you are welcome to visit us at our sales locations in Dortmund or Cologne. We always have a large selection of new vehicles available for quick delivery. Our new vehicle stock alone includes a constant selection of 70 to 100 vehicles — a true highlight in the market.
Visit us at [website] or call us at [phone number].
Küçük ilan
Freiberg am Neckar
2.346 km
Endüstriyel robot
Ara
Durum: ikinci el, Üretim yılı: 2018, Fonksiyonellik: çalışmıyor, toplam ağırlık: 805 kg, yük kapasitesi: 60 kg, kol uzunluğu: 2.033 mm, FR
Il s'agit d'un robot industriel d'occasion, testé, KUKA KR 60 HA (High Accuracy) de l'année 2018, équipé d'une armoire KR C4 avec logiciel KSS 8.5. Ce système est conçu pour des applications industrielles de haute précision et s'utilise généralement dans des domaines tels que l’usinage laser, l’assemblage de précision, la manutention et la production automatisée. Le robot offre une capacité de charge de 60 kg, une portée de 2033 mm, et dispose d’un calibrage absolu d’usine pour une précision maximale de trajectoire. L’installation comprend des packs logiciels avancés comme SafeOperation, Profinet, mxAutomation ainsi que d’autres fonctions de sécurité et de diagnostic avancées.
ES
Se trata de un robot industrial KUKA KR 60 HA (High Accuracy) usado y revisado, fabricado en 2018, equipado con un controlador KR C4 y KSS 8.5. El sistema está diseñado para aplicaciones industriales de alta precisión y se emplea típicamente en trabajos como procesamiento láser, montaje de precisión, manipulación y fabricación automatizada. El robot ofrece una capacidad de carga de 60 kg, un alcance de 2033 mm y está calibrado absolutamente en fábrica para garantizar la máxima precisión en la trayectoria. El sistema incluye avanzados paquetes de software como SafeOperation, Profinet, mxAutomation y otras funciones de seguridad y diagnóstico avanzadas.
IT
Rsdpjy Nfnxjfx Aktew
Si tratta di un robot industriale usato e testato KUKA KR 60 HA (High Accuracy) anno 2018, dotato di controllore KR C4 con KSS 8.5. Il sistema è progettato per applicazioni industriali ad alta precisione ed è tipicamente impiegato in ambiti come lavorazione laser, assemblaggio di precisione, manipolazione e produzione automatizzata. Il robot offre una portata di 60 kg, uno sbraccio di 2033 mm ed è calibrato assoluto in fabbrica per la massima precisione di percorso. L’impianto è dotato di pacchetti software avanzati come SafeOperation, Profinet, mxAutomation e ulteriori funzioni di sicurezza e diagnostica.
Küçük ilan
Freiberg am Neckar
2.346 km
Endüstriyel robot
KUKAKR 210 R3100 ultra + KR C4
Ara
Durum: ikinci el, Üretim yılı: 2014, toplam ağırlık: 1.301 kg, yük kapasitesi: 210 kg, kol uzunluğu: 3.096 mm, FR
Il s'agit d'un robot industriel KUKA KR 210 R3100 ultra d'occasion, testé, datant de 2014, équipé d'une armoire de commande KR C4 fonctionnant sous KSS 8.3. Ce système est conçu pour des applications industrielles lourdes et est généralement utilisé dans les domaines de la manutention, du soudage par point, de l’usinage et de l’automatisation. Le robot dispose d'une capacité de charge de 210 kg et d'une portée de 3096 mm, ce qui le rend adapté aux processus de fabrication exigeants. L'installation est dotée d’options logicielles telles que Gripper&SpotTech, Profibus et RemoteService.
ES
Se trata de un robot industrial KUKA KR 210 R3100 ultra usado y probado, fabricado en 2014, equipado con un controlador KR C4 con sistema KSS 8.3. El sistema está diseñado para aplicaciones industriales de alta carga y se utiliza habitualmente en manipulación, soldadura por puntos, mecanizado y automatización. El robot ofrece una capacidad de carga de 210 kg y un alcance de 3096 mm, lo que lo hace adecuado para procesos de producción exigentes. El equipo dispone de opciones de software como Gripper&SpotTech, Profibus y RemoteService.
Rodpoy Nflwsfx Aktow
IT
Si tratta di un robot industriale usato e collaudato KUKA KR 210 R3100 ultra del 2014, dotato di controllo KR C4 e software KSS 8.3. Il sistema è progettato per applicazioni industriali gravose e viene tipicamente impiegato nella manipolazione, saldatura a punti, lavorazione e automazione. Il robot offre una portata di 210 kg ed uno sbraccio di 3096 mm, risultando idoneo per processi produttivi altamente impegnativi. L’impianto è equipaggiato con opzioni software come Gripper&SpotTech, Profibus e RemoteService.
Küçük ilan
Berlin
2.246 km
2600 litre su kapasiteli itfaiye tanker aracı
Iveco135E22 TLF 16/25 4x4 Allrad MAGIRUS
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 34.000 km, güç: 161,81 kW (220,00 bg), dingil konfigürasyonu: 4x4, yakıt: dizel, Üretim yılı: 1995, Donanım: ek farlar, her tahrikli, tır çekici bağlantısı, Are you looking for a reliable and affordable emergency response vehicle for your fire department? Then you've come to the right place!
Rjdpfx Aoxk T Efoktow
From our immediately available used vehicle stock, we offer you the following:
All-wheel drive fire engine TLF 16/25 4x4 Magirus on IVECO 135E22 chassis
The TLF 16/25 represents the proven combination of the advantages of both group fire engines and tank tenders. With crew cab capacity and ample space for firefighting and rescue equipment, this vehicle is ready for almost any situation.
General data:
• Year of manufacture: 1995
• Mileage: approx. 34,000 km
Chassis:
• IVECO 135E22 4x4 with 220 HP (159 kW)
• Diesel engine with manual transmission
Cabin:
• Standard spacious crew cabin (1+5 seating) in RAL 3000 (fire red)
• Storage for 2 self-contained breathing apparatuses in the crew compartment
Bodywork:
• Manufacturer: Magirus Eurofire
• TLF 16/25 superstructure as per DIN standard
• Three generously sized side equipment compartments per side
• Extendable step boards for front side equipment compartments
• Mountings for standard firefighting loadout
• Storage for 2 additional breathing apparatuses
• Roof storage box
Firefighting pump / Water tank:
• Magirus FPN 1600-8 centrifugal fire pump
• Output: 1,600 l/min at 8 bar
• Water tank: 2,600 l
Firefighting accessories:
• Rigid quick attack reel, 50 m, mounted in the upper G6 compartment
Safety and lighting:
• 2 rotating beacons at the front, 1 at the rear
• Pneumatic special signal "Martin Horn"
• Rear-view camera
• Hygiene board available on request
We would be happy to provide you with a detailed quotation and present the vehicle to you at our Berlin site.
All information provided to the best of our knowledge and belief, without warranty for completeness or accuracy. This advertisement does not constitute a binding offer, but serves for information purposes only. Subject to prior sale!
Küçük ilan
Rohrbach
2.428 km
Kutu kamyonu
ivecoEuroCargo ML 120 E 28 AHK LBW
Ara
Durum: ikinci el, kilometre: 605.785 km, güç: 205 kW (278,72 bg), ilk tescil: 07/2013, yakıt türü: dizel, boş ağırlık: 6.880 kg, azami yük ağırlığı: 5.110 kg, toplam ağırlık: 11.990 kg, dingil mesafesi: 4.815 mm, bir sonraki muayene (TÜV): 09/2026, yakıt: dizel, renk: sarı, şoför kabini: diğer, vites türü: mekanik, emisyon sınıfı: Euro 5, süspansiyon: diğer, toplam uzunluk: 8.950 mm, yükleme alanı uzunluğu: 6.900 mm, yükleme alanı genişliği: 2.450 mm, Üretim yılı: 2013, inşaat yüksekliği: 3.400 mm, Donanım: ABS, hidrolik arka platform, tır çekici bağlantısı, Are you looking for a powerful and versatile truck to reliably support your daily operations? Then this Iveco EuroCargo ML 120 is the ideal choice for your business.
Powered by a robust 5,880 cm³ diesel engine with 205 kW output, this vehicle delivers the strength and endurance demanded in everyday transport. Whether for regional deliveries, construction logistics, or challenging transport tasks, the EuroCargo stands out for its reliability and excellent operating efficiency.
A key advantage of this truck is the combination of a trailer coupling and a tail lift, providing you with maximum flexibility during transport and enabling you to load and unload goods quickly, safely, and efficiently. This saves time, reduces workload, and makes the truck a valuable asset for a wide range of industries.
First registered in July 2013 and with a mileage of 605,785 kilometers, this Iveco is testament to the durability and robustness that have defined the EuroCargo series for years. The Euro 5 emission standard and the proven diesel engine provide a solid and reliable foundation you can count on every day.
Rodpfx Akoyzkkistsw
If you are looking for a ready-to-use truck with a powerful engine, practical features, and versatile applications, you have found a true work partner for many more kilometers to come. Take this opportunity and secure the Iveco EuroCargo ML 120 before it makes daily work easier for its next owner.
Sale exclusively to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to errors and prior sale.
Küçük ilan
Bergeijk
2.694 km
Q-Fin SER600 çapak alma ve finisaj makinesi
Q-Fin Quality Finishing MachinesQ-Fin SER600 - MAG TS
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, çalışma genişliği: 600 mm, giriş voltajı: 400 V, toplam ağırlık: 3.560 kg, iş parçası yüksekliği (maks.): 170 mm, The high-performance deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width.
This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet.
With the Q-Fin SER600 Super Edge Rounder, you can deburr, grind, break edges, round, deslag, remove oxide layer, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible.
The throughput rate of the SER600 is 3 to 5 times higher than comparable machines.
This new 2025 model is equipped with a magnetic support, making it ideal for processing steel cut parts and other magnetic materials. The machine is fitted with 5 processing stations. Operation is simple via an HMI touchscreen on the front of the machine.
The first station of the SER600 features a grinding unit.
The belt of this unit removes burrs and/or heat discoloration from the product surface.
If there are no burrs, the grinding belt can be omitted or removed. It is also possible to process your part with a finer abrasive belt or finish with a Scotch-Brite belt.
The second and third stations comprise the disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are equipped with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges by edge breaking or, thanks to the unique combination of two brush systems, by forming a radius of up to R=3 mm.
With the use of special brushes, the SER600 with magnetic system is also very suitable for removing oxide layers from steel products or slag from plasma-cut components.
We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'.
The WES6000, developed by Q-Fin, is designed to safely extract grinding dust without pressure loss. This extraction system is made entirely of stainless steel, works with wet operation, and extracts grinding dust from stainless steel, steel, and aluminum, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or the work environment.
Currently, we have 2 SER600 units in stock:
1x New (year of construction 2025)
1x Few months used, as new (year of construction 2024)
Redpsl Dw D Eefx Aktsw
The machines can be viewed by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wearing parts.
We can also offer on-site installation of the SER600 + WES6000, including operator training.
- Electrical connection requirement SER600: 400 V, 50 Hz, 32 A, 16 kW
- Dimensions: 3640 x 1585 x 2085 mm (L x W x H)
- Weight: 3560 kg
Küçük ilan
Karben
2.425 km
Dikiş makinesi, katlama, paketleme
AKAB JENTEX Julien JukiAkab
Ara
Durum: ikinci el, Üretim yılı: 2000, KOMPLETTE AUTOMATISCHE BETTWÄSCHE-SAUM-, FALT- UND VERPACKUNGSANLAGE
Räumungsverkauf, Versand im Juni
Laken-Saumautomat: AKAB AK 244 2437..748 Kurzseite / 132 2438 Langseite
Baujahr: 1991
Maximale Breite: 240 cm
Mit Singer-Nähmaschine
Leistung: 170 Stück/Stunde, Nähstich: 6/Stunde, Kettenstich und Industrienähte
Nähen in Längs- und Querrichtung
Bettbezug-Nähautomat: AKAB
Baujahr 1984, 2005 mit moderner Omron-Steuerung überholt
Mit Union Special Nähmaschine, AK 156 2009 Kurzseite, 188 2010 Langseite
Maximale Breite: 180 cm
Kissenbezug-Saumautomat: AKAB
Baujahr 1983, 2005 mit moderner Omron-Steuerung überholt
Mit Faltfunktion und Förderband
Adler-Nähmaschine
Maximale Stoffbreite 240 cm, mit Faltstangen für Stoffbreite 150 cm
Rodpfx Asy Hvaajktew
AKAB AK: 198 1870 Nähen, 176 1871 Falten, 187 1874 Förderband
Kissenbezug-Wendeautomat: Supaturn SUP 3314
Baujahr 1999
Faltmaschine für Bettbezüge: Jentex Typ 5*5, Maschinennr. 42-103, Bj. 2000
Maximale Artikelgröße 315 x 375 cm, Mindestgröße 80 x 80 cm
Faltmaschinentisch: Jomeks, Bj. 2001
Faltmaschine für Kissenbezüge: JULIEN, Bj. 1988
Für Kissenbezüge bis max. 110 x 120 cm
Julien CT/708, 1988
CT/707
Verpackungsstation für Kissenbezüge
Verpackungsstation für Kissenbezüge mit Förderband und Rollensystem – siehe Fotos
Verpackungsstation für Bettbezüge mit Förderband und Rollensystem – siehe Fotos
Manuelle Nähmaschinen:
Juki Schnellnäher DLN-415-4
Yamato Overlock AZ 8003-04 DF
Yamato Overlock YA AZ8003G-04DF/K2/SC10, Bj. 2001
Global Ylisyrjäys OV-704-050
Hubwagen PV-12-3350
Küçük ilan
Noordwijkerhout
2.784 km
DrDryice kuru buz püskürtme ekipmanı
Cold Jeti3 Microclean DX / PELLET SHAVING
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2018, çalışma saatleri: 47 h, Fonksiyonellik: tamamen fonksiyonel, i3 Microclean UPGRADE DX PELLET SANDERS (€2000)
With this machine, you can also use loose 3mm pellets! And of course, blocks.
As good as new, 1-year warranty. Includes hoses and nozzle.
The COLD JET machine is suitable for industrial cleaning, both small and very large projects. The advantage of this machine is that it does not rely on next-generation electronics. It is one of the most powerful machines on the market and is in excellent condition.
Cold Jet i3 Microclean & Dry Ice Press. Complete blasting set including:
COLD JET i3 Microclean (47 hours of operation)
1 x 20' blasting hose
1 x Coldjet applicator
1 x nozzle
Redpoydpy Tjfx Aktow
One of the best machines worldwide. No electronics, making it highly reliable and economical to maintain.
For questions or to schedule a viewing, please contact DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance available for Cold Jet machines.
We also supply new Cold Jet machines. Please contact us.
Worldwide shipping available.
Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning system for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice cleaning system, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice
Küçük ilan
Güntersleben
2.335 km
Döner bükme makinesi ve sac makası
SchechtlKS & HT
Ara
Durum: mükemmel (kullanılmış), You are bidding here on: a branded guillotine shear and bending machine from a renowned and well-known manufacturer – Schechtl.
Device features:
Guillotine Shear HT 200
- Capacity: 1.25 mm steel, aluminium, etc., and more
- Cutting length: slightly over 2 m (blades in excellent condition, see photos – original inscription still present, which usually fades with frequent use)
- Back gauge
- LED light bar for cutting gap illumination
- Extendable front support
Redpjy T H Nxjfx Aktjw
Bending Machine
KS – Capacity: 1 mm steel, approx. 1.5 mm for aluminium and more
- Bending length: slightly over 2 m
- Foot-operated clamping
- Optional back gauge or beading unit
- Extension rail
- Round rollers and additional rails
- Sale as per §25a UStG (VAT margin scheme)
The machines are in a tidy used condition and are ready for immediate use. They come from private ownership.
Important!
Optionally, you can find and purchase many machines and accessories in my store, such as various rails, back gauges – everything required for sheet metal and steel processing, including bending machines, guillotine shears, drills, roll forming machines, slitting and profiling machines, accessories (beading device, round rollers for gutter manufacturing, rear stops, etc.), as well as a wide range of hand tools and spare parts from leading manufacturers. Feel free to contact me with any questions.
You will receive an invoice according to §25a UStG (VAT included – margin scheme)
Free loading possible. Weight: approx. 750 kg and 650 kg.
Viewing and testing are possible and encouraged by prior telephone appointment.
Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you.
Collection by the buyer themselves or by a forwarder commissioned by the buyer should take place within 10 days of the end of the auction.
Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.
Item numbers: Bending machine KS 260504 & HT 260505.
Küçük ilan
Güntersleben
2.335 km
Döner bükme makinesi ve giyotin makaslar
SchechtlHT & KS
Ara
Durum: iyi (kullanılmış), You are bidding on: a branded guillotine shear and bending machine from a renowned and highly regarded manufacturer – Schechtl.
Machine specifications:
Guillotine Shear HT 200:
- Capacity: 1.25 mm steel, higher for aluminium and other materials
- Cutting length: just over 2 meters
- Back gauge
- Extendable front support
Manual Folding Machine (Abkantbank):
- KS model – Capacity: 1 mm steel, up to 1.5 mm for aluminium and other materials
- Bending length: just over 2 meters
- Foot-operated closure
- Optional rear stop or beading device
- Rollers, additional rails
VAT in accordance with §25a UStG (differential taxation)
Optionally, I also offer the possibility to purchase a segmented folding machine from the leading manufacturer Cidan – Cidan is considered the market leader. The Cidan group also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slit line manufacturer).
This is the heavy-duty version – 1 meter, up to 2 mm steel
- Significantly higher for aluminium and other materials
- 3-way segmented
- Angle indicator
- Foot-operated closure
- Storage box
The segmented folding machine can be purchased with any of my machine sets but will not be sold separately – price upon request.
All machines are in good condition, ready for immediate use, and come from private ownership.
Important:
Optionally, you will find a wide range of machines and accessories for sheet metal and steel processing in my shop, such as various rails, back gauge – everything needed for sheet metal fabrication: folding machines, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, as well as accessories (beading devices, roll sets for gutter production, rear stops, etc.), and hand tools or spare parts from many top brands. If you have any questions, I am always available.
You will receive an invoice under §25a UStG – the amount includes VAT (differential taxation).
Loading is free of charge – approximate weights: 750 kg and 650 kg.
Viewing and testing are possible and encouraged by prior telephone appointment.
Rodeyw Si Eepfx Aktow
Payment in cash upon collection. Benefit from our experience and expertise; we are happy to advise you.
Collection by the buyer or by a freight company commissioned by the buyer should take place within 10 days after the end of the auction.
Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.
Item number: KS folding machine and HT shear.
Küçük ilan
Güntersleben
2.335 km
Sac katlama makinesi
SchechtlKSV & HT
Ara
Durum: iyi (kullanılmış), You are bidding on: a branded guillotine shear and folding machine from a very reputable and well-known manufacturer – Schechtl.
Device specifications:
Guillotine Shear HT 200
- Capacity: 1.25 mm steel, aluminum, and more
- Cutting length: just over 2 m
- Depth stop
- Extendable front support
Folding Machine
- KSV – Capacity: 1.5 mm steel, aluminum, up to approx. 2 mm
- Bending length: just over 2 m
- Foot-operated closure
- Optional depth stop or
- Beading device
- Slip rolls and additional rails
- According to §25a UStG (VAT margin scheme)
The machines are in good used condition and are immediately ready for use. They come from private ownership.
Important!
In addition, you can select from a wide range of machines and accessories, such as various rails, depth stops, and everything needed for sheet metal and steel processing—folding machines, guillotine shears, drill presses, slip rollers, slitting and profiling machines, as well as accessories (beading devices, slip rolls for gutter production, rear stops, etc.), as well as further hand tools and spare parts from top manufacturers—all available in our shop. I am always available to answer your questions.
You will receive an invoice in accordance with §25a UStG (VAT included, margin scheme).
Free loading is available; weight approx. 950 kg and 650 kg, respectively.
Viewing and testing by prior telephone arrangement is possible and encouraged.
Payment in cash upon collection. Benefit from our experience and expertise—we are happy to advise you at any time.
Rodsy Tafyspfx Aktow
Collection by the buyer (or a shipping agent appointed by the buyer) should take place within 10 days of auction end.
Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.
Item numbers: Folding Machine KSV 260506 and HT 260507.
Küçük ilan
Targowisko
1.702 km
Uzun Erişim, uzun kol
TokFrezLong Reach
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2026, We are a renowned European manufacturer of Long Reach booms.
Our booms are custom-built for your specific machine (individually tailored for each model) and come equipped with hydraulic lines (hoses), bolts, steel and bronze bushings, and a bucket closing cylinder. The digging (crowd) cylinder is not included in the offer. However, most of our clients use the original cylinder from their machine's arm. Upon request, we can supply a used, refurbished digging cylinder.
Rsdpfx Aeyf Apkoktsw
If you require another length or wish to extend the reach of a different machine, please send us a detailed inquiry!
We offer booms for machines ranging from 14 to 80 tons – suitable for Volvo, CAT, Doosan, Atlas, Kobelco, Hitachi, and others.
Upon request, we can arrange transport for you, complete with all shipping and necessary customs documents.
Our Long Reach booms are made from S355J2 steel, available in a dual-cylinder ("triangle") configuration, which allows for full extension without reducing reach, as well as a single-cylinder ("banana") version, designed for heavy-duty applications. All machined parts (pins, bushings) undergo heat treatment (hardening, carburizing).
The boom set includes:
- Booms/arms
- Bucket closing cylinder
- In the "triangle" version: digging cylinders
- Tubes and hydraulic hoses
- Central lubrication for hard-to-reach points
- Optional (at extra charge): digging or ditch cleaning bucket with appropriately matched capacity
The arms are painted with coatings matched to the respective machine; they feature warning and information decals.
The listed price refers to a 14m boom – for machines from 18 to 29 tons.
Küçük ilan
Weilerswist
2.573 km
Motosiklet römorku
SMART BIKER 1 Absenkanhänger für Motorräder
Ara
Durum: yeni, azami yük ağırlığı: 323 kg, toplam ağırlık: 450 kg, toplam genişlik: 1.880 mm, toplam yükseklik: 860 mm, Üretim yılı: 2026, SMART BIKER 1
The new, practical, and low-maintenance motorcycle lowering trailer
Easy lowering and lifting mechanism:
From now on, you can load and unload your motorcycle easily and conveniently on your own.
Lowerable ? user-friendly - space-saving
Important safety information
Dear customers,
We must inform you that fraudsters are copying our vehicle listings from and eBay Kleinanzeigen and offering them on other, fraudulent websites at significantly lower prices.
Please note:
Our listings are only valid on the official platforms of and eBay Kleinanzeigen.
Any forwarding or display on other sites is fake and serves fraudulent purposes.
To protect our vehicles from misuse, we do not publish all detailed information in our ads. Full details are only available by contacting us directly.
If you are seriously interested, please contact us directly by email or phone.
Thank you for your understanding.
450 kg total weight, payload up to 327 kg
100 km/h approval for Germany?
Load and unload motorcycles ALONE, no ramps required.
Lowerable: simple, fast, and convenient loading.
Upright storable: space-saving vertical storage.
Please ask for current stock availability.
Rjdpfx Akevm Iwlstsw
If your desired color is not in stock, we can usually deliver the trailer in the desired color within 4-5 weeks.
When ordering, you can choose:
Paint finish options, our standard colors are:
deep black - anthracite - white - red - orange - blue
For a small surcharge, you can also choose your preferred color from the full RAL color palette. Please note that attached components such as mudguards, light brackets, etc., are always painted black.
Aluminum wheel choices, two options available:
two-tone silver/black - single-color black
Delivery options
1. Self-collection in 53919 Weilerswist with handover instruction – free of charge
2. Delivery driven on its own wheels with handover instruction – costs on request
3. Palletized shipping to curbside without instruction – costs on request
Standard equipment
Welded steel frame
Galvanized frame parts with powder coating
Lowering and lifting mechanism with additional lock and pin safety
Vertical space-saving storage
Adjustable front wheel clamp
Foldable rear approach plate
10 lashing points for securing straps
Rubber suspension axles, SPP brand
Wheels 195/55 R10C on alloy rims
Painted steel mudguards
Foldable license plate bracket for two-line plates
Lighting system 12V, 13-pole plug
LED tail lights
LED position lights + marker lights
Plastic chocks
Technical Data
Total weight: 450 kg
Unladen weight: 127 kg
Payload: up to 323 kg
Tyres: 195/55 R10C on alloy wheels
Dimensions in driving position: 248 x 188 x 86 cm (LxWxH)
Height in storage position: 200 cm
Max. motorcycle wheelbase: 1650 mm
Offer price incl. 19% VAT.
Financing possible, e.g., monthly instalment EUR 90.00 for 24 months
or monthly instalment EUR 175.00 for 12 months.
Contact us. Subject to credit approval.
Come by or contact us.
Viewing Mon-Fri 09:00 - 17:00,
Saturdays 09:00 – 12:00.
Offer and further information upon request:
Office Tel.
Technical changes, delivery with equivalent components, errors, mistakes, and printing errors excepted.
Küçük ilan
Cochem
2.530 km
Emme
Absaugung ähnlich Emmegi MG4vortex 58
Ara
Durum: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, güç: 3 kW (4,08 bg), giriş voltajı: 400 V, hacim debisi: 2.600 m³/saat, emme kapasitesi: 2.600 m³/saat, gürültü seviyesi: 79 dB, toplam yükseklik: 2.200 mm, toplam uzunluk: 1.000 mm, toplam genişlik: 800 mm, toplam ağırlık: 200 kg, garanti süresi: 12 aylar, Extraction system for double miter saws or saws used in the aluminium sector, e.g. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici etc.
If you are looking for a powerful and quiet extraction system, you have come to the right place.
Alternatively, there is a pre-control device including a switch for your double miter saw, which operates via a potential-free contact.
The extraction system is perfectly suited for aluminium / PVC / steel.
Very powerful and extremely quiet extraction system with noise levels below 80 dB!
Rjdpowii Hxjfx Aktsw
2600 m³ per hour extraction capacity
3 kW motor
Extraction unit includes a 14-meter hose with 2 outlets.
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Hannover
2.462 km
Enjeksiyon kalıplama makinesi
KraussMaffeiKM 250-1000 CX
Ara
Durum: yeni gibi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 65.850 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61013689, sıkıştırma kuvveti: 2.500 kN, vida çapı: 50 mm, kolonlar arası açıklık: 630 mm, silindir hacmi: 432 cm³, enjeksiyon basıncı: 2.304 bar, enjeksiyon ağırlığı: 393 g, Donanım: dokümantasyon / kılavuz, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine trade. Of course, we are also interested in purchasing well-maintained, currently available used injection moulding machines, model year 2010 or newer. We have been wholesalers of used injection moulding machines for over 25 years.
Current Notice – Tax Information and Advantages for Used Machines
From July 1, 2025, used machinery can also benefit from a special annual depreciation of 30%. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as you would for a new machine.
Keyword: Growth Booster (§ 7, paragraph 2 EStG-E)
Currently in stock and tested at our Hanover warehouse:
Manufacturer: Krauss Maffei
Model: KM 250 1000 CX
Control System: MC5
Year of manufacture: 2010
Operating hours: 65,850 h
Machine number: 61013689
Processed materials: PE and PP thermoplastics
Extras:
- 2 x core pullers (movable WAP, fixed WAP)
- Pneumatic valve 1 on FWAP
- Accumulator for increased injection performance
- Fast SK change CX Midrange
- Ejection of cooled nozzle plugs
- Start handling during mould movement
- Start-up circuit
- Cycle time analysis
- External USB keyboard
- Graphical analysis – maintenance instructions
- Electronic coding of injection unit
- Pneumatic valve for blowing out at BWAP
- 12 temperature control zones
- Volt-free contact BDE
- Process monitoring
- Cycle storage
- Trend chart – target/actual graph
- PV control
- Active backpressure control
- Single previous owner – German origin
Regular maintenance by manufacturer and previous owner
Clamping Unit:
Clamping force: 2500 kN / 250 tons
Tie-bar spacing: 630 x 630 mm
Platen size: 995 x 1050 mm
Max opening stroke: 820 mm
Min mould height: 330 mm
Max daylight: 1150 mm
Ejector stroke: 200 mm
Ejector force: 57 kN max / 26.3 kN return
Injection Unit:
Screw diameter: 50 mm
Injection volume: 432 cm³
Shot weight: 393 g (PS)
Injection pressure: 2304 bar
Electrical Equipment:
Pump: 45 kW
Heater: 5 zones, 18.7 kW
Redpfsxqhuusx Aktew
Weight: 13,900 kg
Dimensions: 5.7 x 2.3 x 2.3 m
Complete documentation, manual, software included.
Available immediately from our Hanover warehouse (Germany) or free delivery within Germany against reimbursement of freight costs.
The machine is offered tested and operational.
The machine is our sole property.
The requested machine is available immediately at our Hanover warehouse, offered tested and operational, and can be inspected under power.
To inform you about our machines and our company:
- We only sell machines purchased from ongoing production, stored at our Hanover warehouse.
- All listed machines are inspected and tested before removal.
- We do NOT sell insolvency assets and we are NOT intermediaries trading third-party property.
- All machines come from successful companies where regular maintenance and servicing are standard.
- All machines are available for inspection at our warehouse.
Küçük ilan
Hannover
2.462 km
Enjeksiyon kalıplama makinesi
Arburg270C 400-70
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 203129, sıkıştırma kuvveti: 400 kN, vida çapı: 18 mm, silindir hacmi: 23 cm³, Here we offer, as a specialist dealer in injection moulding machines, the following well-maintained used injection moulding machine:
We also purchase well-maintained injection moulding machines from model year 2010 onwards.
We have been a wholesaler of injection moulding machines for over 25 years.
Rodpfx Akjx Rvcijtjw
Manufacturer: Arburg
Model: 270C 400-70
Control system: Selogica
Year of manufacture: 2007
Operating hours: 89,470 h Screw and barrel replaced
Machine number: 203129
Extras:
- Robot interface
- Highly wear-resistant screw
- CF drive
- Complete documentation and software (on CF card)
- Diverter chute
The machine is equipped with retrofitted interfaces for:
- Mold temperature control
- Hot runner
- Colour dosing
via Siemens Logo PLC control
German language
- Single owner - origin: Germany
Regular maintenance by manufacturer and previous owner
Clamping unit
Clamping force: 400 kN / 40 tons
Tie bar spacing: 270 x 270 mm
Mounting plates: 446 x 446 mm
Opening stroke: 350 mm
Minimum mold height: 200 mm
Max. daylight between plates: 550 mm
Ejector stroke: 125 mm
Ejector force: max. 30 kN
Injection unit
Screw diameter: 18 mm
Injection volume: 23 cm³
Shot weight: 21 g
Injection pressure: 2,500 bar
Electrical data
Pump: 11 kW
Heater: 4 zones, 4 kW
Installed power: 15 kW
Main fuse: 50 A
Weight: 2,150 kg
Warranty
Warranty valid until initial commissioning
Loading/Shipping
Free loading onto buyer’s truck or delivered free to buyer’s address against shipping charges
Available ex stock Hanover, Germany
Information about our machines and our company:
- We only sell machines purchased from ongoing production from our own stock in Hanover
- All machines offered are inspected and tested prior to dismantling
- We do NOT sell insolvency stock and are NOT a broker trading on behalf of third parties
- All machines on offer come from successful companies where maintenance and care are standard procedure
- All machines offered are available for inspection at our warehouse
Küçük ilan
Hannover
2.462 km
Enjeksiyon kalıplama makinesi
Arburg520S 1600 290/70 -2k 2 farben multilift
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, enjeksiyon sayısı: 2, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine trade.
Of course, we also buy well-maintained injection moulding machines from model year 2010 onwards.
We have been wholesalers of injection moulding machines for over 25 years.
Manufacturer: Arburg
Model: 520S 1600 290/70 – 2-component machine
Year of manufacture: 2009, from first ownership in Germany
• Total cycles: 12.3 million
• Manual operation: 86,565 hours
• Automatic operation: 78,099 hours
Injection units (2K)
Injection unit 1 – horizontal -290
• Screw diameter: 25 mm
• Shot volume: 71 cm³
Injection unit 2 – vertical -70
• Screw diameter: 18 mm
• Shot volume: 21 cm³
Clamping unit
Mounting platens: 695 x 695 mm
• Max. platen distance: 925 mm
Opening stroke: 675 mm
Mould installation height: 250 mm
Rjdpfoyzumzex Aktsw
• Electric index rotary table: available
Extras
Hot runner / additional axes
• 12-zone hot runner integrated
• 3x core pullers
• 2x air blast functions
→ including needle shut-off control
• Various customer-specific inputs and outputs
Interfaces / Communication
• ALS
• Interface for temperature control units
• Interface for dryers
Handling / Multilift H (6 kg)
• 2x vacuum circuits
• 5x double-acting gripping functions
• Z-axis servo-driven, 800 mm stroke
• C-, G-, X-, and B-axes pneumatic
• Various customer-specific inputs and outputs
→ including gripper monitoring
Maintenance fully documented for the last 3 years
- Both injection units resealed by Arburg
- Clamping unit completely resealed by Arburg
- Accumulators replaced by Arburg in 2020
Warranty
Warranty until initial commissioning
Loading/Shipping
Free loaded on buyer’s truck or free delivery to site for reimbursement of freight cost
Worldwide delivery
Available from our warehouse in Hanover, Germany
About our machines and company:
- We only resell machines acquired from ongoing production directly from our own inventory in Hanover
- All machines offered are inspected and tested prior to removal
- We do N O T sell insolvency goods – we are N O T brokers dealing with third-party property
- All offered machines come from successful businesses for whom maintenance and care is a matter of course
- All offered machines are available for inspection at our warehouse
Küçük ilan
Hannover
2.462 km
Enjeksiyonlu kalıp makinası
Engel200/80 Tech CC200
Ara
Durum: mükemmel (kullanılmış), Üretim yılı: 2006, çalışma saatleri: 69.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 163769, Here we are offering a well-maintained injection moulding machine.
We are also happy to accept well-maintained machines from year of manufacture 2005 onwards in part exchange. Please offer us your surplus machines.
Manufacturer: Engel
Model: Victory 200/80 Tech
Year of manufacture: 2006
Control system: CC 200
Machine number: 163769
Operating hours: approx. 69,000
Equipment/Extras
- Installed languages: German, English
- 25 mm screw (wear and corrosion-resistant)
- CC200 control unit
- Enlarged mounting platens (B-plates)
- Minimum mould installation height 250 mm
- Maximum platen spacing 700 mm
- Quality diverter / PD protocol + graphics
- 5 x CEE 400 V / 3 x Schuko 230 V
- 4 freely programmable inputs and outputs
- Euromap 12 interface for handling
- Engel EMS host computer interface
- Without material hopper or feeder
(The screw cylinder has been replaced, as well as the pump; PE and PP processed)
Clamping unit
Clamping force: 80 t / 800 kN
Tie bar spacing: tie-bar-less
Mounting platens: 730 x 600 mm (H x W)
Max. platen opening: 700 mm
Min. mould installation height: 250 mm
Opening stroke: 450 mm
Injection unit
Screw diameter: 25 mm
Stroke volume: 69 ccm
Injection pressure: 2090 bar / 2400 bar (increased)
Weight: 5,200 kg
Dimensions: 4.00 m x 1.40 m x 2.00 m (LxWxH)
Rjdpfx Akem Nclvetow
Available ex stock Hannover/Germany, free loaded onto buyer’s truck or delivered (freight charges apply).
Inspection under power possible.
If a certified manufacturer technician carries out commissioning, the customer receives a full warranty until successful commissioning. No further warranty or guarantee is provided beyond commissioning. Age- and usage-related wear is accepted. The costs for the manufacturer technician or any subsequent certified electrician must be borne by the customer.
For information about the machines we offer and our company:
- We only sell our own machines, purchased from ongoing production, ex stock Hannover
- All machines offered are checked and tested before dismantling
- We do NOT sell insolvency goods – we are NOT brokers trading on behalf of third parties
- All machines offered come from successful companies where maintenance and care are a matter of course
- All machines offered are available for inspection at our warehouse
Sizin için aramayı kolaylaştırıyoruz: "cometa durkopp adler vbo"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay











































































































































































































































































































































































