Kullanılmış Fliegl Sds 510 Mit Tiefbett satın al (11.086)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT23502035606, boş ağırlık: 5.325 kg, azami yük ağırlığı: 26.675 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.490 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: gri, römork freni: frenli römork, The images are archive photos; the vehicle may still be in use! Chassis Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions. King pin mounted in the front position. Patented curved front bulkhead. 24 t, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with push compensation. Detaching under load is not possible; when uncoupled, the vehicle must be positioned at a rearward angle. Free rearward swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the front position. Wheel chocks with holder. Aluminum side underrun protection. Folding rear underrun protection. Rear underrun protection with spring assistance for easier operation. Half-shell mudguards. Asphalt-specification splash flaps behind the last axle, fitted to mudguards with a hinge, with hanging provision at the top of the mudguard, shortened mudguard. Tarpaulin bar with holder. Tow hook at the rear (not on Revolution models). Dkjdpfox Dkpnox Ahren Axles & Suspension BPW or SAF drum brake axles, at manufacturer's discretion. Axles in off-road specification. “Axle/chassis laser alignment” – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, including forced lowering and start-up assistance, operated via “3x brake” (start-up aid is active up to 30% axle overload and up to a maximum speed of 25 km/h). “Hot-dip galvanized lift axle mechanism” – 10-year warranty against corrosion. Brake System 2-line compressed air braking system. Colored layout of air lines for easy servicing. Spring-loaded parking brake. Two anti-tangle coupling heads in front, without connecting line. 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractors that ensure ABS functionality! With raise & lower valve. Vehicle stability control system. Paver brake, electrically operated from the truck, no truck installation required. Automatic tipping lowering with shut-off valve. Wheels and Tires 385/65 R22.5 – manufacturer at supplier’s discretion. Steel rims, factory silver. Electrics 24 Volt, multi-chamber lights, yellow side LED lighting. Two front white position LED lights. Two rear white/red lane marker lights. 1 x 15-pin socket at the front, without connecting cable. 1 LED headlamp with integrated “Osprey” body camera (technical inspection required upon order). LED strobe light(s) at the rear, operated by a switch in the truck cab, no truck installation required, wired to PIN 12. In case of order: please specify PIN allocation! Rear-view camera system with color flat-screen monitor, wireless connection to the display, monitor with suction cup mount and power via 24-volt vehicle socket. Registration Country / Plates Germany. With DEKRA inspection and certificate (in accordance with §13 of the EC Type Approval Regulation). 24/7 service hotline. Superstructure rigidity according to EN 12642. Prepared for single-line license plate holder. Reflective contour marking according to ECE R 048, white on sides and red at rear. Paintwork Frame: DB 7350 Novagrau. "10-year warranty against corrosion." Landing gear: black coated. Tipper body/sidewall: Scania Urban Grey 2389173. Rolling tarp: RAL 7038 Agate Grey.

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902032084, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: beyaz, inşaat yüksekliği: 3.240 mm, Attention: The images shown are archive photos; the vehicle may still be in use! Alcoa Dura-Bright aluminium rims Air suspension 1st axle with automatic lift axle function, including forced lowering and auxiliary lift function, actuation via “3x braking” (auxiliary lift is operational up to 30% axle overload and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with a 10-year warranty against rust-through. Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting 2 white front position lights 2 white/red rear marker lights 1 x 15-pin socket at the front, without connection cable 2 additional LED work lights, recessed and integrated at the rear, activated via the reverse gear signal Hydraulics High-pressure cylinder, max. 250 bar; smallest stage hard-chromed; with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Removed from the vehicle to be claimed Hydraulic actuation via truck PTO Hydraulic connection with hose and HDK screw coupling NW = 48 mm with knurled nut Bodies / Tipping Body Aluminium box body made of premium, abrasion-resistant material. Slanted front wall, 5 mm thick, with external cylinder mount. Sidewalls constructed from 30 mm hollow-chamber profiles, precisely welded, featuring a bulk material-repelling upper edge profile. Interior access at the front wall (not in combination with Cramaro). Shovel and broom holder mounted externally on front wall. Greenline – tapered and aerodynamic body shape "Membrane" rear wall Rear wall as swinging tailgate with “double-joint hinge”, externally mounted with dual hook locking system. Tailgate with rubber sealing. Note: Heat resistant up to max. 170°C! Continuous 6 mm thick floor Dksdpswhfiyofx Ahron Standing platform with access ladder, connector plate for air/electrics and brakes with ample free space for optimal accessibility. Roll tarp, stowable on the passenger side, with central locking on the driver’s side.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 5.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.750 mm, yükleme alanı hacmi: 41 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised according to customer specifications. Further Information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2-inch kingpin Curved front wall (patented) 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without compensator 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface With anti-spray flaps only on the last axle Djdji Ri Efjpfx Ahrskn 1 tarpaulin bar with bracket 2 tow hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to minimise tyre wear and fuel consumption Axles in off-road version Air suspension First axle automatic lift axle, including forced lowering and starting aid, activated by braking 3 times (starting aid functional up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism: 10 years warranty against corrosion Braking System 2-line compressed air brake system. Colour-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System, EBS socket at front, without connecting cable Important: The trailer may only be towed by tractors that ensure the functionality of the ABS! With raise & lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer at supplier's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body (Tipping Body) Aluminium box body made of high-quality, wear-resistant material, front wall 5 mm thick, exterior side walls made of 30 mm hollow chamber profiles, cleanly welded, with material-repellent upper edge profile. Interior with ladder at front wall (not available with Cramaro cover). External shovel and broom holder at front wall. Greenline – conical and aerodynamic body shape Rear Wall Rear wall with pendulum mounting, featuring double joint hinges and twin-door division (1/2 to 1/2), with swing-out arm at the top, each door with one grain chute. Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor 6 mm continuous plate Standing platform with steps, connection plates for air, electrics and brakes with ample space for optimum accessibility. Roll tarp, stowable on the right (driver's direction), with central locking on the left.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 4.900 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 38 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Tailored Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to individual customer specifications. Chassis – Tipping Semi-Trailer Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall – patented Central telescopic support; uncoupling with load is not possible, when uncoupled, vehicle must be sloped to the rear. 2 wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface With anti-spray mud flaps only on the rearmost axle 1 curtain rod with bracket 2 towing hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser aligned for reduced tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by braking 3 times Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system, color-coded line routing for easy maintenance Spring-loaded parking brake 2 foolproof coupling heads at front EBS (Electronic Braking System) with EBS socket at front With raise & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, brand as per manufacturer’s choice Steel rims, factory silver Electrics 24 V, multi-chamber lights; side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin foolproof sockets at front, no connection cables Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation: hydraulic via truck PTO Body Aluminum box body made of high-quality, wear-resistant alloy; front wall 5 mm thick, outer side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-deflecting top rail profile. Interior with ladder on front wall (not in combination with Cramaro). Shovel and broom holder on front wall exterior. Greenline – conical and aerodynamic body shape. Tailgate Rear wall as swinging tailgate with double hinge, external with double hook lock. Rear wall with rubber seal. Note: Heat resistant up to 170°C max. Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brakes with ample space for optimal operability. Roll tarp, one-sided storage to FR-right, with central locking on FR-left Dsdpfoi Riz Rsx Ahrjkn Paint Frame in DB 7350 Nova Grey 10 years Tailored Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to individual customer specifications.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902036248, boş ağırlık: 7.272 kg, azami yük ağırlığı: 27.728 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", lastik durumu: 100 yüzde, Body color: Monochrome RAL tone freely selectable Chassis: Semi-trailer, forwarding specification Dedoza S E Rjpfx Ahrekn Fine-grained steel welded construction in lightweight design down to the support legs, fifth-wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-side operation Extendable ladder at the rear Side door retainers Foldable splash guard for lighting unit Rear underrun protection 1 aluminum ladder approx. 3,550 mm, with side mount 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm Axles & Suspension: BPW disc brake axles, 430 mm disc diameter Air suspension, 1st axle with automatic lifting axle including forced lowering and starting aid, activation by "3x braking" Braking system: 2-line compressed air brake system Spring-loaded parking brake 2 tamper-proof coupling heads at the front 24 V EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by tractor units that ensure the ABS operates correctly! With lift/lowering valve Vehicle stability control system "RDKS" Tire pressure monitoring system per ECE R 141, display via tractor's dashboard using EBS 1 additional air connection on LH rear, with quick coupling Wheels and tires: 385/55 R22.5" – brand at manufacturer's discretion Steel rims, factory silver Electrics: 24 V, multi-chamber lights, side yellow LED illumination Side yellow LED lights with indicator connection (flashing side lights) 2 white LED position lights at the front 2 white/red track marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connection cables 2 additional LED work lights at the rear, switched via reverse gear SB Hydraulics: Hydraulic cylinder with sliding mechanism built into the floor. Dual-circuit hydraulics. Forward/reverse switchover electric, via cabled remote control Operation via lorry PTO Hydraulic connection with hose on front panel and HDK screw connector, NW = 48 mm SB Floor: Moving floor with wear plate at rear Aluminum floorboards, 8 mm profiled, grooved version SB Body: Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made from aluminum hollow profiles, all around at top with a wide, special reinforcement profile welded from aluminum; special welded subframe at bottom. Moving bulkhead for improved load discharge, reinforced tarpaulin strip at the bottom. Rear wall: aluminum hollow profile, double-door (1/2-1/2 split), all around framed with special U-profile with stop and rubber sealing, 2 external rotary catches, locked at top and bottom. Rear wall with mechanical safety lock, operated at rear, on left in direction of travel Standing platform with access ladders on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin 3 removable, swiveling cross bows for tarp support + tarp racks at front wall and rear wall Paintwork: Frame: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: Black coated Body: Natural aluminum – can be painted in customer RAL color of choice Roll tarp: Not yet installed.

Koşul: iyi (kullanılmış), - Tip: GS - 250 - Seri No: 14 - Yapım yılı: 1999 - Boyutlar min.: L1100mm x W800mm x H900mm - maks.: L1700mm x W1300mm x H900mm - Güç tipi: 1 x 220V / 50HZ / 7,8 A Dkjdorgqp Nepfx Ahrjn - Bağlı yük: 1500w / 2800 MIN - 1 kW - İstek üzerine fiyat

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014072, boş ağırlık: 7.300 kg, azami yük ağırlığı: 27.700 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.530 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.330 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5", lastik durumu: 100 yüzde, renk: gümüş, Chassis, Semi-Trailer, for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, main frame reinforced for a central load of 25 tons over 3 m loading length when retracted. 13 pairs of hooks, welded to crossmembers for lashing strap attachment 23 pairs of recessed lashing rings in outer frame, each rated for 3.5 tons 24-ton, 2-speed support winch in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel carrier for 1 spare wheel 1 storage compartment for insert stakes, open, with a socket option behind front wall for storage / or compartment for storage between the extended longitudinal beams 4 pairs of stake pockets recessed in the outer frame, for box section stakes 80x80 mm 5 stake pockets recessed centrally in the floor, for box section stakes 80x80 mm, with reinforcement beams, installed between the outer stake pockets except one 6 lashing/stake rails recessed transversely in the floor, over the full width up to the outer frame (max. usable inside width between the outer insert stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing approx. 60 mm (of the round steel). Bottom features angle bracket closure, half open downward. For lashing and staking 80 x 80 mm posts Dksdpfsza Dyyjx Ahrsn Rear pull-out ladder, passenger side 5 x 3 pairs of stake pockets recessed in longitudinal beams outside, for 80x80 mm box sections, including reinforcement beams 10 lightweight insert stakes, 80 x 80 mm, usable height approx. 1850 mm, hot dip galvanized, with welded-on lashing rings on both sides at the bottom 2 plastic toolboxes, W=600 mm / H=425 mm / D=460 mm, lockable Telescoping: Extendable by max. 4000 mm and lockable every approx. 500 mm Main frame telescopic Locking with pneumatic pin locking system + frame locking status indicators on both sides, activation via manual button, operation for brake/locking and suspension on left side in front of axles Storage compartment between longitudinal beams when extended Axles & Suspension: SAF disc brake axles, 430 mm brake disc diameter Rear axle self-steering, with automatic reversing lock via reverse light and additional manual lock on the vehicle via push button Axle spacing staggered 1310/1410 mm Air suspension 1st axle with automatic lift axle, also electrically controllable from the truck, with traction aid Brake system: 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front Wabco EBS, Electronic Brake System with EBS socket at the front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be pre-equipped) Wheels and Tyres: 385/65 R 22.5" steel rims Electrical System: 24-volt, multi-chamber lights, yellow LED side marker lights 2 white front position LEDs 2 white/red rear marker LEDs 2 x 7-pin and 1 x 15-pin mistake-proof sockets at the front 1 revolving beacon with holder, controlled via parking light 2 pairs of LED warning boards illuminated and extendable to 3500 mm Flashing side marker lights Side 7-pin sockets: 2x at front wall, 2x at landing gear, 2x at rear end plate 1 additional 7-pin socket in rear underrun guard 2 additional LED work lights mounted inside at the front wall, with external switch on left front side Anti-slip phenolic plywood flooring approx. 30 mm thick 25 mm aluminium hollow section, 1950 mm high, corner posts i

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014200, boş ağırlık: 6.700 kg, azami yük ağırlığı: 28.300 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.500 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: gri-siyah, Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with exchangeable 2" kingpin Outer frame in a new, slightly angled design with “Load-Lock profile” for lashing strap attachment 24 t. 2-speed landing gear, single-side operation, with straight lower part, without compensating slide Free landing gear foot distance or free rear swing radius approx. 1,920 mm Dsdpfx Asza A Txehrekn 2 wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-spray, EU-compliant 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable. (Lock not included) Axles & Suspension SAF drum brake axles "Laser measured axles/chassis": reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and starting aid, operation via "3x braking" (starting aid function active up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Braking system 2-line compressed air braking system Color-coded line routing for easy service Spring-actuated parking brake 2 anti-mix coupling heads at the front, without connecting line EBS, electronic braking system with front EBS socket, without connecting line Attention: The trailer may only be towed by tractors which ensure effective ABS operation! With raise & lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin anti-mix sockets at the front, without connecting lines Floor Approx. 30 mm thick phenolic resin-coated plywood, high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, steel corner posts in volume design Country of registration / plates Germany With Dekra inspection certificate (in accordance with §13 EG – FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame: DB 7350 Nova grey Front corner posts: hot-dip galvanized Front wall: aluminum

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT10401014064, boş ağırlık: 1.500 kg, azami yük ağırlığı: 2.300 kg, toplam ağırlık: 3.800 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.000 mm, yükleme alanı yüksekliği: 1.000 mm, toplam uzunluk: 4.300 mm, toplam genişlik: 2.460 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: yeşil, Multiple units available Single-axle container trailer Type EPS 38 for diesel generator set superstructure Chassis single-axle trailer Fine-grained steel welded construction Mounting of the generator by bolting Front support wheel, reinforced version, adjustable in length mechanically and foldable at the bottom 1 pair of 2-speed gearbox support legs at the rear, with straight lower section, individually operable left and right Dsdpfx Ahszazrtsrjkn Wheel chocks with holders Side underrun protection made of aluminum, painted RAL 6031 bronze green matte Rear underrun protection made of steel, painted RAL 6031 bronze green matte Mudguards in front of and behind the axle, upper section covered with metal plate, with anti-spray flaps 2 pairs of lashing recesses, one pair at the front and one at the rear embedded in the cross members, each rated for 3 t for loading the trailer, marked (sticker) 4 pairs of ferry lashing eyes, marked in yellow Lashing point stickers at every lashing eye Perforated steel sheet with rosette profile on both sides next to the generator, pull-out ladders on both sides Brackets for 2 x 20L fuel cans on the vehicle frame on the front right Central lashing point sticker Storage box made of steel, installed at the front of the floor with drainage holes and fitted with a perforated rubber mat, lockable lid (lock not included) Drawbar single-axle trailer Drawbar with tested 40 mm swivel towing eye/NATO towing eye Drawbar height adjustable via spindle. The nut for the spindle mounting bolt is at FR-right Parking sockets for electrics/EBS and air Axle & Suspension BPW axles with tapered roller bearings and S-cam brakes Laser-measured axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tyres 235/75 R17.5, as per manufacturer selection Steel rims, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 fool-proof coupling heads at the front, with connecting lines to the truck Yellow connector at FR-left and red at FR-right ABS/EBS, electronic braking system with EBS plug at the front, with connecting cable EBS modulator fitted in a protected position Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Vehicle driving stability system Electrics 24V, multi-chamber lamps, side yellow LED lighting Electrics ADR compliant with certificate 2 white position lights at the front and reflectors 2 white/red lane marker lights at the rear 1 x 15-pin socket + 1 x 15-pin removable spiral cable at the front Approval / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, rear only, white Warning sign according to ECE - 70 Paintwork Frame RAL 6031 bronze green matte Drawbar same as frame color Multiple units available.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33001012559, boş ağırlık: 6.250 kg, azami yük ağırlığı: 17.750 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.620 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 10.890 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 860 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5", lastik durumu: 100 yüzde, renk: siyah, Chassis Low Loader Trailer: Steel welded construction, turntable with robust ball bearing ring, foldable rear support, 2 wheel chocks with holder, aluminium side underrun protection, full-width rear mudflap (not in combination with forklift mount), half-shell mudguards, 1st axle with anti-spray mudflap, anti-spray mudflaps behind 2nd and 3rd axles, 1 plastic toolbox with shelf, lockable with padlock, dimensions: width=620 / height=360 / depth=440 mm. Extendable widenings to 3,000 mm. Central storage compartment for wooden beams on the loading area, 70 mm wooden beams for extension to 3,000 mm. Tie-down rings on the low loader, 1 pair of tie-down recesses built into the front longitudinal member at the gooseneck, each rated for 10 t. 4 pairs of lash holes on the outer frame, each for 5 t (for lashing strap attachment). 7 pairs of lashing mushrooms, recessed into the top and side of the outer frame, each rated for 10 t: 1x at the gooseneck, 6x in the low deck section; first tie-down 250 mm from the front and last max. 250 mm from the rear, distance between tie-downs not greater than 1,100 mm. 5 pairs of ring lashing points recessed in the outer frame, each for 5 t (can be converted for stake pockets). 2 additional pairs of folding tie-downs, each for 10 t: 1 at the gooseneck (overhanging), 1 recessed in the floor behind the last axle. 1 pair of screw-in lashings, each rated for 6.7 t (JDT), with large flange plate including thread as counterholder, at the front on the gooseneck. Drawbar Assembly for Turntable Trailer: Drawbar with tested 40 mm towing eye, parking sockets for electric/ABS and air connections on the drawbar. Dodpfx Aszaznzjhrekn Axles & Suspension: SAF drum brake axles, "laser calibrated axles/chassis" – reducing tyre wear and fuel consumption, air suspension with lift & lower valve, separately operable front and rear. Wheels and Tyres: 235 / 75 R 17.5" Fulda, wheels: 6x steel rims mounted inside in twin-tyre arrangement; 6x polished aluminium wheels mounted outside. Brake System: 2-line pneumatic brake system, spring-loaded parking brake, trailer info centre for display of vehicle data such as axle load (not calibrated) and odometer, vehicle stability control, axle load detection via EBS CAN-bus signal for in-cab display (truck must be pre-equipped), 2 fail-safe coupling heads at the front with connection lines to the tractor unit, EBS, electronic braking system with EBS plug at the front with connecting cable. Electrics: 24 Volt, multi-chamber LED lamps, side yellow LED marker lights, LED number plate lighting, brand Aspöck EcoLED 2 with dynamic indicator, premium LED side marker lamps, 2 white front position lamps in LED, 2 white/red lane guide lamps at the rear in LED, 2x 7-pin fail-safe plugs at the front with connecting cable, additional LED work light at the rear, 1 LED beacon with holder, switched via parking light, 2 pairs of LED warning signs illuminated and extendable to 3,000 mm. Floor: Gooseneck front with steel/ribbed plate covering, storage box recessed in the approach slope to the gooseneck, followed by 70 mm larch wood floor, in the wheel arch area steel/ribbed plate covering, rear slope with 70 mm larch wood floor. Low loader deck including rear slope: 6,500 mm. Loading ramps: steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, additional lower ramp lock (prevents lateral sliding of the ramps, not in combination with side hydraulic ramp shift), wooden covering, spring-assisted lifting. Frame: hot-dip galvanise

Üretim yılı: 2026, Koşul: yeni, KVK 1A, KVK 2 (MA) ile neredeyse aynı kardeş modeldir, yani KVK 2 MA'ya kıyasla el transpaletiyle zemin seviyesinden erişim için bir kesikle donatılmış döner tablalı yarı otomatik bir streç sarıcıdır. Bu sarıcı ile hala manuel olarak yapılması gereken tek şey filmi beslemek ve kesmektir. 700 kg ağırlığa sahip bu model de profesyonel kullanım için tasarlanmıştır ve 1500 kg'a kadar yüklenebilir. Dkodpfx Ajzaakhehrsn 1A 1500 mm döner tablaya sahiptir ve standart olarak 2400 mm yüksekliğe kadar paletleri sarabilir. Döner tabla ve film taşıyıcı için ayarlanabilir hızların yanı sıra potansiyometre ile çok hassas bir şekilde ayarlanabilen elektromanyetik fren sayesinde otomatik sarma işlemini ürününüze mükemmel bir şekilde uyarlayabilirsiniz. Paletlerinizin otomatik olarak tanınması (fotosel aracılığıyla), ayarlanabilir kafa ve ayak sarma kadar doğal bir konudur. "Sadece yukarı" sarma, "yukarı & aşağı" (çapraz sarma) ve "yağmur geçirmez" sarma için programlar mevcuttur. Gerekirse sarıcı manuel olarak da kontrol edilebilir. Sarıcının farklı bir yere taşınması gerekiyorsa, entegre kesikler kullanılarak forkliftle kolayca kaldırılabilir ve taşınabilir. Koyu ambalaj malzemelerini veya siyah filmi tanımak için bir fotosele ek olarak, KVK 1A'nın sarma yüksekliği isteğe bağlı olarak değiştirilebilir (3200 mm'ye kadar). Tavsiye KVK 1A, alan nedeniyle rampa kullanılamıyorsa veya özellikle ağır veya dengesiz ambalajlı ürünler bir rampa aracılığıyla döner tablaya itilemeyecekse idealdir. Daha fazla bilgi için, teknik veri sayfasını PDF olarak bu ilana ekledik!

Üretim yılı: 2026, Koşul: yeni, KVK 1A, KVK 2 (MA) ile neredeyse aynı kardeş modeldir, yani KVK 2 MA'ya kıyasla el transpaletiyle zemin seviyesinden erişim için bir kesikle donatılmış döner tablalı yarı otomatik bir streç sarıcıdır. Bu sarıcı ile hala manuel olarak yapılması gereken tek şey filmi beslemek ve kesmektir. 700 kg ağırlığa sahip bu model de profesyonel kullanım için tasarlanmıştır ve 1500 kg'a kadar yüklenebilir. 1A 1500 mm döner tablaya sahiptir ve standart olarak 2400 mm yüksekliğe kadar paletleri sarabilir. Döner tabla ve film taşıyıcı için ayarlanabilir hızların yanı sıra potansiyometre ile çok hassas bir şekilde ayarlanabilen elektromanyetik fren sayesinde otomatik sarma işlemini ürününüze mükemmel bir şekilde uyarlayabilirsiniz. Paletlerinizin otomatik olarak tanınması (fotosel aracılığıyla), ayarlanabilir kafa ve ayak sarma kadar doğal bir konudur. "Sadece yukarı" sarma, "yukarı & aşağı" (çapraz sarma) ve "yağmur geçirmez" sarma için programlar mevcuttur. Gerekirse sarıcı manuel olarak da kontrol edilebilir. Dkedpfxozaahms Ahrjn Sarıcının farklı bir yere taşınması gerekiyorsa, entegre kesikler kullanılarak forkliftle kolayca kaldırılabilir ve taşınabilir. Koyu ambalaj malzemelerini veya siyah filmi tanımak için bir fotosele ek olarak, KVK 1A'nın sarma yüksekliği isteğe bağlı olarak değiştirilebilir (3200 mm'ye kadar). Tavsiye KVK 1A, alan nedeniyle rampa kullanılamıyorsa veya özellikle ağır veya dengesiz ambalajlı ürünler bir rampa aracılığıyla döner tablaya itilemeyecekse idealdir. Daha fazla bilgi için, teknik veri sayfasını PDF olarak bu ilana ekledik!

Koşul: ikinci el, ilk tescil: 06/2018, Üretim yılı: 2018, Fliegl ZWP 180 2-Axle Skeletal Trailer with KRONE BDF Swap Body - Refrigerated Box with CARRIER SUPRA 850 Deep-Freeze Unit !! 4 units available !! Djdpfxezbdg As Ahrekn Fliegl ZWP 180 Trailer ● First registration: 06/2018 ● Vehicle dimensions: 9,150 mm x 2,480 mm (LxW) ● Full air suspension ● Lift and lower system ● ABS ● 2 x air-suspended BPW - 9 t axles Krone WR 7.3 S BDF Swap Body - Refrigerated Box !As new condition! ● First registration 06/2016 ● ATP/FRC certification extendable until 2029! ● Aluminium checker plate floor ● 2 x 2 lashing rails on the side walls ● Box with niche for refrigeration unit ● Internal box dimensions: 7,250 x 2,470 x 2,400 mm (LxWxH) ● 2 rear portal doors with 4-point bar locking CARRIER SUPRA 850 Easycold Refrigeration Unit ● 3,900 operating hours ● DIESEL - Electric (380 V) ● External diesel tank ● Thermograph ● Remote control ● External battery - German vehicles! - 1 owner! - Technical inspection (TÜV) / Safety inspection: available on request and at additional cost! Subject to errors and prior sale! = Additional information = Gross vehicle weight: 18,000 kg

Koşul: mükemmel (kullanılmış), Hidrolik silindir, destek silindiri - Piston çapı: yaklaşık 130 mm - Piston kolu: 100 mm - Stroke: yaklaşık 700 mm - destek makaraları ile - her silindir el pompası ile - Adet: 3 adet silindir mevcut Dkjdpfx Aeb A Hvlehrsn - Fiyat: adet başı

Koşul: ikinci el, azami yük ağırlığı: 15.300 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2018, bir sonraki muayene (TÜV): 02/2027, Üretim yılı: 2018, Donanım: ABS, * Fliegl ZWP 18 BDF trailer * Former driving school vehicle * First registration: 01/2018 * TÜV valid until 02/2027 * Hardly any rust * SAF axles * ABS / EBS * Disc brakes * Air suspension * Tyres: 385 / 65 R 22.5 * Tyre tread approx. 90% * Unladen weight: 2,700 kg Dksdpfx Aozbpxqehrsn * More pictures and videos available via WhatsApp * Information subject to change and prior sale.

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201011556, boş ağırlık: 3.300 kg, azami yük ağırlığı: 8.200 kg, toplam ağırlık: 11.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, renk: kırmızı, The images are archive photos; the vehicle may still be in use! Further Information: - Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing - Gear support foot at the front, foldable rear support, 2 wheel chocks with holder, steel underride guard, mudflap across full rear width, quarter shell fenders, spare wheel (same make as main tyres), steel rim, loose, 1 plastic toolbox with removable shelf (dimensions: w=620/h=360/d=440 mm), lockable with padlock (padlock not included). Note: In the folded-down position, the sideboard touches the storage box. - Lockable storage compartment for loading ramps beneath the cargo bed, 1 pair of aluminum ramps, length 3,000 mm, width 360 mm, load capacity per pair 8,000 kg (ramp mounting rail at rear) - Drawbar with certified 40 mm towing eye, height-adjustable via spindle, max. adjustment range 300 mm - BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical load equalization (rocker balancing) - 2-line compressed air braking system, color-coded lines for easy servicing. - Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS socket at front, complete with connecting cable. Note: The trailer may only be towed by vehicles capable of supporting ABS functionality. 2 non-interchangeable coupling heads at the front, with connecting hoses to the tow vehicle. - 24 volts, multi-chamber lights, yellow LED side lighting, 2 white position lights at the front - 2 white/red marker lights at the rear, two 7-pin non-interchangeable sockets at the front, with connecting cable - Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle (to be retrofitted to the truck if required). Hydraulic connection SVK coupling NW 10/3 with hose included - Actuation hydraulically via truck PTO - Robust tipping platform with 4 mm steel floor plate, steel sideboard construction, continuous sides, fold-down and swing-mounted with lower central locking. Removable rear corner posts. Rear wall fold-down and swing-mounted with lower central locking. - Platform length approx. 5,000 mm, side walls with 6 lower hinges, platform width 2,420 mm Dkjdpfxjlhpzvj Ahrsn - 5 pairs of lashing rings in the floor, each rated at 5 tons Country of registration: Germany, with Dekra inspection and certificate (as per §13 EC-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048 (white on the side, red at rear)

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, anti-lock braking system * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf * Gross weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L = 7,000 mm, W = 2,500 mm, H = 1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1,020 mm * Platform length approx. 7,000 mm * Pneumatic locking * Air connection: duomatic Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more pictures and videos on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles Djdpfey D E Ubsx Ahrokn * Fast, uncomplicated financing * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Contact our trained professional staff—we are happy to advise you.

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 41040 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS (Anti-lock Braking System) * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Storage/toolbox * Galvanized * Pneumatic locking system * Spring suspension (leaf springs) * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% * Tire condition 1st axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7,000 mm, W=2,500 mm, H=1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height: 1,020 mm * Platform length: approx. 7,000 mm * Pneumatic locking * Duomatic air coupling Liability disclaimer: Subject to alterations, prior sale and errors excepted. You will find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions Dkjdey D E Uhspfx Ahrsn * Processing of all (export) documents * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing * TÜV certifications, registration service * Transfer of commercial vehicles Please contact our trained specialists for advice – we are happy to help.

Koşul: yeni, Konsol raf, yeni H: 400cm, tavan ve arka panel ile taban +3 depolama seviyesi Adalar hariç, Almanya içinde ücretsiz teslimat Veriler : - H : yaklaşık 400 cm - D : yaklaşık 147 cm - L : yaklaşık 1420 cm - Konsol kolları : yaklaşık 125 cm - Merkez mesafesi: 290 cm (müşteri gereksinimlerine göre uyarlanabilir) - Yeni ürünler - Almanya'da üretilmiştir. - Teslimat süresi ticari açıklamadan sonra yaklaşık 6 hafta. - Kol başına 1000 kg yük Dkedjzbikyspfx Ahron - Dikme başına 4000 kg yük - Sıcak daldırma galvanizli dikmeler. - Konsol kolları sıcak daldırma galvanizlidir. - Kollar cıvatalıdır. - Kollar 200 mm'lik artışlarla ayarlanabilir. - Seviyeler: Taban + 3 depolama seviyesi (4 depolama seviyesi) Raf şunlardan oluşur: - 06 x dikme, taban dahil yaklaşık 400 cm IPE270'den yapılmıştır. - 18 x IPE 120'den yapılmış yaklaşık 125 cm konsol kolları. - 06 x çatı kirişi yaklaşık 150 cm IPE 120'den yapılmıştır, 5° yükselen çatı eğimi. - Çatı ve arka duvar malzemesi dahil. - Gerekli tüm bağlantı elemanları ve vidalar dahil. Neden BLT konsol rafları ? - Sertifikalı Alman üretici DIN EN 1090 - Almanya'da üretilmiştir - Dikmelerin ve konsol kollarının belirtilen tüm yük taşıma kapasiteleri % 100 yükte statik olarak doğrulanabilir. - Tüm raf sistemleri sıcak daldırma galvanizli olarak tedarik edilir. Bu nedenle hem iç hem de dış mekanlara monte edilebilirler ve boyalı sistemler gibi paslanmazlar. Uzun yıllar boyunca tutarlı görünüm. - DIN EN 15048-1 uyarınca yasal olarak öngörülen sıcak daldırma galvanizli vida bağlantılarını kullanıyoruz - Uzun satış sonrası garanti - Dik ayak ve dik sırt birbirine kaynaklanmıştır, bu da ayakların dik sırta cıvatalanması gerekmediğinden ek güvenlik ve kısa montaj süreleri sağlar. - Destekler açılı çelikten yapılmıştır, bu nedenle gerdirmelerle ayarlama gerekmez. Bu da montaj süresini kısaltır. - Yarıklı delik sistemi yoktur, bu nedenle dikme profilinde zayıflama olmaz. Fiyat : 12.250,00 € net artı yasal katma değer vergisi. KDV'nin gösterildiği bir fatura alacaksınız. Montaj : Gerekirse, eğitimli personelimiz işletme ekipmanınızın profesyonel montajı ve demontajı konusunda size yardımcı olmaktan mutluluk duyacaktır. Bizim tavsiyemiz : Neye ihtiyacınız olduğunu bize bildirin... Planlama ve siparişten kuruluma kadar projelerinizi gerçekleştirmenize yardımcı olmaktan mutluluk duyacağız.

Koşul: yeni, Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, her bir konsol kolu başına taşıma kapasitesi: 140 kg, raf yüksekliği: 2.500 mm, toplam uzunluk: 3.150 mm, toplam yükseklik: 2.500 mm, dingil mesafesi: 1.030 mm, her ayak başına taşıma kapasitesi: 1.120 kg, yaklaşık 3,15 rm. Raflı konsol raf 60 cm derinlik H: 250 cm 140 kg/kol META Multistrong Veriler : - H : yaklaşık 250 cm - D : yaklaşık 81 cm - L : yaklaşık 315 cm - Konsol kolları : yaklaşık 60 cm - Merkez mesafesi : 103 cm - YENİ ÜRÜNLER hemen stoktan. - Kol başına 140 kg yük - Dikme başına 1120 kg yük - RAL5010 (gentian mavisi) renkte dikmeler. - Konsol kolları RAL5010 (gentian mavisi). - Kollar kancalıdır ve kilitleme cıvataları ile sabitlenir. - Kollar 70 mm'lik artışlarla ayarlanabilir. - Seviyeler: Taban + 4 depolama seviyesi (5 depolama seviyesi) Raf şunlardan oluşur: - 04 x dikme, taban dahil yaklaşık 250 cm IPE120'den yapılmıştır. - 16 x konsol kol, yaklaşık 60 cm, 40 x 30 mm dikdörtgen profilden yapılmıştır. - 12 x META raf, yaklaşık 100 x 60 cm - Gerekli tüm bağlantı elemanları ve vidalar dahil. -- Hemen temin edilebilir Fiyat : 1765,00 € net 2100,35 € brüt KDV dahil bir fatura alacaksınız. Dsdpfx Aozbighjhrekn Zemin ankrajları, çarpışma koruması vb. aksesuarlar da bizden satın alınabilir. Nakliye : Talep üzerine, teslimat ortak nakliye şirketimiz tarafından gerçekleştirilebilir, bunun için maliyetler posta koduna bağlıdır. Montaj : Gerekirse, eğitimli personelimiz iş ekipmanınızın profesyonel montajı ve demontajı konusunda size yardımcı olmaktan mutluluk duyacaktır. Bizim tavsiyemiz : Neye ihtiyacınız olduğunu bize bildirin... Planlama ve siparişten kuruluma kadar projelerinizi gerçekleştirmenize yardımcı olmaktan mutluluk duyacağız.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902030381, boş ağırlık: 5.960 kg, azami yük ağırlığı: 29.040 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: siyah, The images are archive photos; the vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, slightly sloped outer frame featuring "Load-Lock profile" for securing straps, 24-ton capacity. Two-speed landing gear, operated from one side, with straight lower section, without sliding compensation. Note: Free landing gear corner dimension or free rear swing radius approximately 1930 mm without supports. Rear pull-out ladder, side-mounted door retainers, pallet box for 32 Euro pallets (extended version), ground clearance approx. 300 mm. Rear underrun protection, "Blocker": transverse galvanized steel angle serves as forklift and door hinge protection, double-sided pallet stop approx. 15–20 mm high, bolted version; loading height reduced by approx. 15–20 mm. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axles/chassis laser-measured" to reduce tire wear and fuel consumption. Air suspension, no lift axle. Dodpfx Ahjy Tvwxerjkn Brake System: Two-line compressed air brake system with color-coded piping for easier servicing. Spring-loaded parking brake. Two non-interchangeable coupling heads at the front, no connecting line. EBS (Haldex), electronic braking system with EBS socket at the front, no connection cable, with raise & lower valve. Vehicle stability control system, brake lining wear indicator via EBS-Canbus signal (for display in truck cab, truck must be pre-equipped), axle load monitoring via EBS-Canbus signal (for display in cab, truck must be pre-equipped, no truck installation/no certified scale). TPMS (Haldex) tire pressure monitoring system via EBS, no truck installation (truck must be equipped accordingly). Electrics: 24V, multi-chamber LED lights with resistors, yellow LED side marker lights, LED license plate lighting. Two white position lights at the front, two white/red lane lights at the rear, one 15-pin plug at the front, no connecting cable. Additional LED work light at the rear, controlled by reverse gear. Floor: Screen-printed plywood, approx. 30 mm thick, on longitudinal supports for high point load bearing, suitable for forklift axle loads up to 7100 kg. Bodywork Mounted body Front wall / front corner posts: 2,580 mm high, steel corner posts in high-volume design, release mechanism for side curtain at headboard, "crash blocker", inner base approx. 140 mm high with steel impact protection. Center posts: two pairs of sliding posts, adjustable throughout the length, with four double insert pockets and long lower pocket; two pair of post positions. Insert slats: 5 rows of aluminum V-insert slats. Rear wall/rear corner posts: steel rear corner posts up to lower roof edge, curtain attachment with round tube and ratchet tensioners. Rear portal doors, double-leafed, each with two internal turn bar locks. Curtain: Curtain with welded-in horizontal and vertical straps, stainless steel tension fasteners. Roof: Sliding canopy, rear end-liftable, moveable from rear to front; L-roof rail for automotive industry. Internal width between roof rails approx. 2,490 mm; curtain color: white. Non-elastic roof with minimal sag during loading/unloading. Anti-ice system with single central hose and automatic forced ventilation via brake light. Optimal rear rain gutter above doors on final bow.

Koşul: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. Rotating beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, two-part loading ramps, mechanical ramps, extendable tow bar, lateral aluminum underrun protection, twin tyres, EBS. Dodpfx Asxbttqshrokn Body: loading length approx. 8.5m, extendable to 3.05m. Demonstrator vehicle! Parabolic suspension with axle compensation at the rear, 3 x 10t SAF axles, permissible gross weight up to 30t possible, length-adjustable drawbar. New vehicle from stock with daily registration on 21.07.2020 in the manufacturer's name! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Stair stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent visual and technical condition, like new; the device has been used very little. Everything works flawlessly. You can start working with it immediately. All machines are designed for commercial use—no cheap DIY store products. Stair Stringer Milling Device SCHEER TW 4 With this device, you can very precisely mill treads and risers. The hand crank allows you to process even curved joint surfaces. It can also be used for milling operations on other panel materials, such as worktops. Equipped with hardened guide shafts, on which the cross-slide with the router runs. Features ball bearing guide bushings for very smooth, precise, and safe movement. The device can be securely clamped onto the stringer or similar workpieces using four screw clamps. The cross-slide features two end stops for both longitudinal and transverse movement. Includes two angle stops. Comes complete with manual, tools, and all accessories. Dodpfx Ajyxr T Tohrjkn Longitudinal milling travel is 750mm; the transverse travel has been increased from 75mm to 320mm, significantly expanding the machine’s range of applications. To achieve the extended milling travel, a new base frame was manufactured from aluminum profiles. The modification work was carried out by a reputable mechanical engineering firm. Everything works perfectly; the machine is genuinely one of a kind. Router SCHEER HM 16 Very good condition, minimal signs of use. Extremely robust thanks to the triple-bearing spindle. Precise concentricity and perfect milling finish. Accurate column guidance with a torsion-resistant milling table. Constant speed even under heavy load. High-performance motor (virtually no signs of fatigue). Long service life due to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the heaviest milling tasks in continuous operation. Excellent visibility of the milling spindle; chips are blown away by a powerful blower. 220V, 1800W Speed: 18,000 rpm Works flawlessly. With M16 internal thread collet.

Koşul: yeni, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.020 mm, yükleme alanı yüksekliği: 500 mm, yükleme alanı hacmi: 4 m³, Brüt Araç Ağırlığı: 6.000 kg Dsdpfxozbmb Ns Ahrokn

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 91130417, Üretim yılı: 2018, çalışma saatleri: 320 h, yük kapasitesi: 1.600 kg, kaldırma yüksekliği: 5.000 mm, serbest kaldırma: 1.550 mm, yük merkezi: 600 mm, direk tipi: triplex, inşaat yüksekliği: 2.200 mm, akü modeli: PzS, pil kapasitesi: 465 Ah, batarya voltajı: 48 V, çatalların uzunluğu: 1.150 mm, Donanım: UVV güvenlik kontrolü, Jungheinrich ETV 216 reach forklift, 500DZ triplex direk ile çok bakımlı durumda. Az çalışma saatine sahip cihaz, entegre yan kaydırıcı, tam serbest kaldırma ve kompakt yapı yüksekliğine sahiptir. Teknik ve görsel olarak iyi genel durumda, hemen kullanıma hazır, şarj cihazı dahil. İhracat ve nakliye mümkündür. Djdpfjy Tpukex Ahrekn