Kullanılmış Starfoil Victoria Sıcak Damgalama Silindiri satın al (5.406)

Koşul: mükemmel (kullanılmış), CTS type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is used for conducting thermal shock tests and is typically employed in industry, research, and quality assurance applications. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Dsdpfxjy Hkd Hs Aanekn Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: - Timewise: ±1 K - Spatial: ±2 K Temperature change speed: - Maximum 100 K/min on average for shock test procedures without radiant heat Temperature transfer time: - ≤ 15 min in the range of -65°C to +200°C with 10 kg ICs Changeover time: -

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 115 kg, giriş voltajı: 230 V, garanti süresi: 24 aylar, sıcaklık: 95 °C, Teknik özellikler: Durum: YENİ Katalog numarası: 1.030-510.0 Elektrik bağlantısı (Faz/V/Hz): 1 / 230 / 50 Güç tüketimi (kW): 0,3 Maksimum besleme suyu sıcaklığı: 50°C Minimum besleme suyu miktarı: 400 l/saat Su debisi (l/saat): 400-1300 Maksimum işletme aşırı basıncı (güvenlik valfi): 220 bar Maksimum sıcak su çalışma sıcaklığı: 95°C Brülör gücü: 64kW Maksimum ısıtıcı yakıt tüketimi: 5,9 kg/saat Yakıt deposu: 20L Yakıt türü: Mazot (EL tipi) veya dizel Çalışma ağırlığı: 115kg Dedpexykwwofx Aanskn Boyutlar (UxGxY, mm): 880x680x860 Teslimat kapsamı: - Klasik püskürtme tabancası - M22 dişli - Püskürtme borusu: 1050 mm - Hortum: 10m - DN8 - 250bar - 100°C - M22/M22 - Hortum (yüksek basınçlı temizleyici ile sıcak su jeneratörü bağlantısı) - 3m - DN8 - 315bar - 60°C Dayanıklı cihaz: - Dayanıklı çerçeve, sürekli ve yoğun kullanımda koruma sağlar. - Bakım gerektiren tüm parçalara kolayca erişilebilir. - Entegre yakıt filtresi ve yakıt deposunun temizlik amacıyla sökülebilme imkânı.

Koşul: iyi (kullanılmış), Teklif şunlardan oluşmaktadır: Orijinal Heidelberg Zylinder, 57x77 cm, 1966 model, tamamen çalışır durumda, inceleme mümkündür, video talep üzerine gönderilebilir. Dedpfsyy Rw Hjx Aanokn

Üretim yılı: 2020, çalışma saatleri: 1.000 h, Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, 🔥 New price every Monday – while supplies last! 🔥 KAMA ProCut 76 Foil – High-end Die Cutting and Hot Foil Stamping Machine Model year 2020 | only approx. 1,000 operating hours | immediately available For sale is a KAMA ProCut 76 Foil from 2020, in exceptionally good condition with only approx. 1,000 operating hours. The machine is currently in production, is fully functional, and can be inspected and tested under power at any time. Why this machine is interesting: ✔ Immediately available – no long lead times ✔ Extremely low operating hours ✔ High-end configuration including hot foil unit & AutoRegister ✔ Ideal for premium packaging and finishing applications ✔ Made in Germany ✔ Significantly below new price Highlights & Equipment • Integrated hot foil stamping • KAMA AutoRegister for maximum registration accuracy • Servo main drive for higher speeds and/or longer stamping time • Servo-driven feeder and feed table • Electronic double sheet control • Pneumatic tool clamping • Die cutting force display with overload protection • Universal chase frame • Chase frame rack • Vacuum pump and compressor • CE compliant • Industry 4.0 ready / network connectivity Dkjdpeyc Hmuofx Aansn Technical Data • Model: KAMA ProCut 76 Foil • Year of manufacture: 2020 • Operating hours: approx. 1,000 h • Max. sheet format: 760 × 600 mm • Max. die cutting format: 743 × 585 mm • Production speed: up to 5,500 sheets/h • Die cutting force: 165 t The machine comes from our own operation and is for sale because it is now rarely needed in the current production environment. 📍 Location: 75397 Simmozheim, Germany 🔌 Inspection under power possible 📄 More photos and documents available on request

Koşul: yeni, Genel özellikler: Ekmek hamuru makinesi 100 kg un başına 65 ila 90 litre su Hız varyatörü, istenen yuvarlama derecesini elde etmek için aralıklar arasındaki göreceli hızı ayarlamanıza olanak tanır 70g'dan 2200g'a kadar parçalar için uygundur Yuvarlanacak parçaların boyutunu ayarlamak için iki ayarlanabilir çubuk arasında açı Un kabı Yüksekliği ayarlanabilir Kolay hareket için döner tekerlekler 1400g'a kadar hamur parçaları ile çalışabilir Ayarlanabilir yuvarlama süresi aralıklardan birinin hızını kontrol eder Yüksekliği ayarlanabilir ayaklar İki şerit arasındaki açı bir nokta ile ayarlanabilir İsteğe bağlı olarak bir un püskürtücü takılabilir Teknik özellikler: Bant uzunluğu: standart 1,7 m Dkodpjuuc T Tefx Aanen Güç: 1,1 kW Gerilim: 380V 3N PE Ağırlık: 250 kg

Koşul: yeni, Genel özellikler: Ekmek hamuru makinesi 100 kg un başına 65 ila 90 litre su Hız varyatörü, istenen yuvarlama derecesini elde etmek için aralıklar arasındaki göreceli hızı ayarlamanıza olanak tanır 70g'dan 2200g'a kadar parçalar için uygundur Yuvarlanacak parçaların boyutunu ayarlamak için iki ayarlanabilir çubuk arasında açı Dkedeuuc Uwopfx Aansn Un kabı Yüksekliği ayarlanabilir Kolay hareket için döner tekerlekler 1400g'a kadar hamur parçaları ile çalışabilir Ayarlanabilir yuvarlama süresi aralıklardan birinin hızını kontrol eder Yüksekliği ayarlanabilir ayaklar İki şerit arasındaki açı bir nokta ile ayarlanabilir İsteğe bağlı olarak bir un püskürtücü takılabilir Teknik özellikler: Bant uzunluğu: standart 1,5 m Güç: 1,1 kW Gerilim: 380V 3N PE Ağırlık: 250 kg

Koşul: yeni, Genel özellikler: Ekmek hamuru makinesi 100 kg un başına 65 ila 90 litre su Hız varyatörü, istenen yuvarlama derecesini elde etmek için aralıklar arasındaki göreceli hızı ayarlamanıza olanak tanır 70g'dan 2200g'a kadar parçalar için uygundur Yuvarlanacak parçaların boyutunu ayarlamak için iki ayarlanabilir çubuk arasında açı Un kabı Yüksekliği ayarlanabilir Kolay hareket için döner tekerlekler 1400g'a kadar hamur parçaları ile çalışabilir Ayarlanabilir yuvarlama süresi aralıklardan birinin hızını kontrol eder Yüksekliği ayarlanabilir ayaklar İki şerit arasındaki açı bir nokta ile ayarlanabilir İsteğe bağlı olarak bir un püskürtücü takılabilir Teknik özellikler: Bant uzunluğu: uzun 2m Dsdpfxsuuc U Ro Aanokn Güç: 1,1 kW Gerilim: 380V 3N PE Ağırlık: 320 kg

Koşul: ikinci el, Üretim yılı: 1959, Heidelberg OHT 1959 yılında üretilmiş olup A4 formatında bir makinedir. Şu anda üretimde olup Almanya'da bulunmaktadır. Teslimat şartları FCA'dır. Biçim: A4 Dedpfx Aaovfxwtsnekn Teçhizat: Tipo baskı merdanesi - damgalama merdanesi Delme kuvveti 40 ton Minimum format: 40 x 70 mm Standart çerçeve: 260 x 340 mm Hız min.: 2.200 d/d - max. Saatte 5.500 devir

Koşul: ikinci el, Üretim yılı: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting operations. It accommodates an A4 format and is currently stored in Germany. This press, bearing serial number T 184634 H, offers a punching force of 40 tons and can process a minimum sheet size of 40 x 70 mm. It operates at a minimum speed of 2,200 revolutions per minute up to a maximum of 5,500 cycles per hour. The machine is equipped with a skeleton frame measuring 260 x 350 mm and a standard frame of 260 x 340 mm, with a maximum format of 260 x 380 mm. It is delivered complete with accessories and a locking frame and is supplied with a letterpress plate and a die-cutting plate. Delivery terms are FCA (Free Carrier). Specifications: - Format: A4 - Maximum speed: 5,500 cycles per hour - Power supply: 380 V, 1.25 kW - Net weight: 1,100 kg - Dimensions: L1.68 x W1.24 x H1.85 m Dkedpfevfxu Ejx Aanjn Features: - Skeleton frame: 260 x 350 mm - Minimum speed: 2,200 rpm – Maximum: 5,500 cycles/hour - Maximum sheet size: 260 x 380 mm - Letterpress platen – die cutting platen - Punching force: 40 tons - Minimum sheet size: 40 x 70 mm - Complete with accessories and locking frame - Standard frame: 260 x 340 mm - Machine number: T 184634 H

Koşul: mükemmel (kullanılmış), ÇİFT TARAFLI DAMGALAMA SİSTEMİ - Köprü Vakum sistemi (pompalı) Dkodpfx Ajt Ty A Asanen Üst destek kirişinin 2 numaralı dikey destek kolonları No. 1 yatay üst destek kirişi (taşıyıcının üzerinde kaydığı yer) Yatay metal kollu No. 1 motorlu araba No. 2 Panel yığınının boşaltıcıdan çıkışı için uzatılmış makaralı konveyörler No. 1 Destacker'da harici motorlu makaralı konveyör Ayrı elektrik panosu Çevre güvenlik ızgarası Kapasite (döngü / dakika) 16 (yaklaşık) Min/maks panel kalınlığı (mm) 10 / 50 (yaklaşık) Min. panel boyutları mm. 250 x 320 (yaklaşık) Maks. Panel boyutları mm 1300 x 3000 (yaklaşık) Toplam bağlı yük Kw 80

Koşul: ikinci el, Hydraulic power clamping cylinder for actuating power chucks Hollow clamping cylinder RÖHM SZ-E68/115 459-109 ID No. 426518 Serial No. 22950 Operating pressure: max. 50 bar Speed: max. 5000 rpm Piston diameter: 150 mm Piston rod diameter: 88/100 mm Stroke: 10 mm Internal diameter in the cylinder tube: 68 mm Thread connection for draw tube: presumably M79 x 1.5 mm Flange diameter: 185 mm Flange pitch circle: 140 mm (6x M12) Internal centering diameter: 101.7 mm - Flange connection on spindle side Weight: 25 kg Dimensions (L x W x H): 350 x 250 x 190 mm Dkodeyy Dfkspfx Aanon Hydraulic power clamping cylinder for opening and closing automatic power chucks. For hydraulic actuation of power chucks or collet chucks. Hollow clamping cylinder for hydraulic actuation of power chucks/collet chucks with through-hole.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 Dsdpsvz Hhxsfx Aanokn The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Dkjdpfevz Hq Tsx Aanjn Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar Dksdpfxsvz Hqgo Aanon - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Djdsvz Hqmjpfx Aanekn Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. Dkedpfovz Hqtsx Aanjn - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa Dsdpfevz Hqyjx Aanskn - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. Dsdpfx Aaovz Hq Henokn The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Üretim yılı: 1989, Koşul: iyi (kullanılmış), makine/araç numarası: 11848, Delme plakası Gietz MDST, makine numarası 11848, üretim yılı 1989, iyi durumda, hemen temin edilebilir İki Gietz modelimiz daha var. Lütfen teklif isteyin. Dsdorbhd Topfx Aanjkn Eğer ilgilenirseniz, şirketimizdeki diğer makineler hakkında da sizi bilgilendirmekten memnuniyet duyarız. Makineyi önceden randevu alarak tesislerimizde görebilirsiniz.

Koşul: iyi (kullanılmış), Simplacutter delme potası, 72 x 102 cm, iyi durumda, hemen temin edilebilir Djdpfeiypwaox Aanjkn İlgileniyorsanız, evimizdeki diğer makineler hakkında sizi memnuniyetle bilgilendireceğiz. Önceden randevu aldıktan sonra makineyi evimizde ziyaret edebilirsiniz.

Koşul: iyi (kullanılmış), Üretim yılı: 1997, delme kuvveti: 350 t, toplam ağırlık: 4.500 kg, giriş voltajı: 380 V, giriş frekansı: 50 Hz, Stanztiegel TMZ Type L122, üretim yılı 1997, formatı 93x126 cm, pres kuvveti 350 ton, hız 1400 devir/saat, hızlı bağlama çerçevesi, emniyetli ayak pedleri ile birlikte, iyi durumda, hemen teslim edilebilir. Dsdpfsx Dilhox Aanekn

Koşul: ikinci el, Üretim yılı: 1992, Kapama kuvveti 600 kN Bağlama plakası 460x460 mm Kolonlar arası mesafe 300x300 mm Makine ağırlığı yaklaşık 4,5 ton Kapama stroku 230 mm İtici kuvveti 40 kN İtici stroku 70 mm Kalıp yüksekliği 120-350 mm Kolon çapı 56 mm Döküm kuvveti 55 kN Döküm stroku 130 mm Piston çapı 45,50,55 mm Döküm hacmi (DIN 24480) 76,121,165 cm² Spesifik döküm basıncı 345,280,231 kp/cm² İlgili ayırma yüzeyi 174,214,260 cm² İniş stroku 150 mm İkinci el DAW 50 enjeksiyon döküm makinesi, SBC2 kontrol ünitesiyle birlikte, çinko alaşımlarının kullanımına uygundur. İkinci el makine stoklarımızda mevcuttur. Makine, Rauch markalı MO50E elektrikli fırın ve kullanılmış Oskar Frech marka 401 pnömatik püskürtme cihazı ile donatılmıştır. Dkodpefrvzvsfx Aanen Üretici tarafından genel bir revizyon önerilmektedir. Revizyon kapsamı, karşılıklı anlaşmaya bağlı olarak gerçekleştirilebilir.

Koşul: iyi (kullanılmış), Isıtma veya soğutma plakası Boyutlar: 1.600 x 600 x 50 mm Kanallar: 6 Masa / alt yapı: 1.600 x 600 x 820 mm Kullanım: sıcak veya soğuk su ile doldurmak için uygundur Dedpslnfhzsfx Aanjkn

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Mold Masters Hotrunner harici 3 bölgeli hotrunner TMXL-3/3-0 Elimizde 7 adet mevcuttur Dkjdpsvax Izsfx Aansn mevcut birimler

Koşul: yeni, Rulo çapı: 140 mm Rulo genişliği: 50 mm Delik çapı: 35 mm Dedpfjyucufsx Aanokn Mil kanalı: 10 mm 1 adet fiyatı: 37 EUR