Kullanılmış Cts Sıcaklık Test Hücresi Walk-In Test Sistemi satın al (54.990)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33903000211, boş ağırlık: 7.707 kg, azami yük ağırlığı: 27.293 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, yükleme alanı uzunluğu: 15.030 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 101 m³, toplam uzunluk: 15.350 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", renk: gümüş, The images shown are stock photos; the vehicle may still be in use! Vehicle configuration: Chassis: • Semi-trailer, haulier specification • Fine-grain steel lightweight welded construction up to the support legs, fifth wheel plate with replaceable 2" kingpin • 24 t two-speed landing gear, single-sided operation, with straight lower section • Rear extension ladder • Side door retainers • 2 wheel chocks with holders • Aluminium side underrun protection • Steel rear underrun protection with wide Fliegl mud flaps • Foldable mudguard for lighting unit • Quarter shell fenders • Rear impact protection • Tarpaulin support bar with holder • 1 plastic toolbox Axles & Suspension: • 3 BPW disc brake axles • 'Axles/Chassis laser-aligned' for reduced tyre wear and fuel consumption • Air suspension Brake system: • Two-line compressed air brake system • Colour-coded pipework for easier servicing • Spring-actuated parking brake • Duomatic coupling • EBS (Electronic Braking System) with EBS socket at front, without connection cable Note: This trailer must only be towed by tractors that ensure the effectiveness of the ABS! • With lift and lower valve Vehicle stability system: • AAC Basic, automatic lift axle on the last axle acts as a maneuvering aid, up to 20 km/h, can be deactivated manually • Axle load detection via EBS Canbus signal Wheels and tyres: • 385/55 R22.5", manufacturer at supplier's discretion Electrics: • 24 Volt, multi-chamber rear lights, side yellow LED lighting • Side yellow LED lights linked to indicators (flashing side marker lights) • 2 white front position lights • 2 white/red lane marker lights at rear • 2x 7-pin and 1x 15-pin interchangeable sockets at the front, without connection cable SB Hydraulics: • Hydraulic cylinder with sliding device fitted in the floor. 2-circuit hydraulic system. • Forward/reverse switching is electric via cable remote control. • Operation hydraulically via truck PTO • Hydraulic connection with hose at front wall and HDK screw-in plug Recommended pump performance: • Flow rate: 110 ltr/min • Pressure: 250 bar • Oil reservoir minimum: 100 ltr Floor: 8 mm aluminium floor planks, grooved design Aluminium box-type body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, all-round upper edge with welded-on wide special reinforcement profile. Sliding wall for improved load discharge, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminium hollow profiles, double-leaf door with 50/50 split, all-round special U-profile frame with stop and rubber gasket, equipped with 2 external locking rod mechanisms, locked top and bottom. Rear wall with mechanical safety lock, operated from the left-hand side (direction of travel). With pivoting upper crossbar. Dedjy Snmpjpfx Afusch Standing platform with ladder access from both sides 3 removable, pivoting cross bars for tarpaulin support Roll tarp, one-sided opening, with 2 longitudinal tensioning straps, 3 ratchet tensioning straps on the side Operating instructions: Special permit required if overall length exceeds 16,500 mm. Registration/Country plates: • Germany • With Dekra inspection and report (in accordance with §13 EC-FGV) • Warning sign "Long vehicle" • Long vehicle/trailer combination certificate • Driver briefing at the Triptis factory for up to 4 people per truck combination Paintwork: • Frame: DB 7350 Novagrau • Body: Natural aluminium • Roll tarp: RAL 7035 light grey

Koşul: işlem için hazır (kullanılmış), Heidenhain Id. 324 952-01 interface board SN: 7271755 – inspected, tested, 100% functional, with 3 months warranty, scope of delivery as per photos Dcodpfx Ajy Nqf Aefueh

Koşul: işlem için hazır (kullanılmış), Heidenhain Id. 359 002-01 arayüz kartı SN: 12727718A, kontrol edilmiş, test edilmiş, %100 çalışır durumda, 3 ay garanti ile. Teslimat kapsamı fotoğraflara göre. Dcedpfx Asy Nqgajfuoh

Koşul: işlem için hazır (kullanılmış), Heidenhain Id. 359 002-01 Interface board SN: 11989222A – inspected, tested, 100% functional with 3 months warranty, scope of delivery as shown in photos. Dodpfxoy Nqf Ne Afuoch

Koşul: ikinci el, azami yük ağırlığı: 31.400 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2016, yükleme alanı uzunluğu: 13.400 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, yükleme alanı hacmi: 89 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2016, Donanım: ABS, 3-axle Kraker CF-Z Cargo Floor Walking Floor Trailer, 89 m³ VIN: 16069337 Chassis / Attachments: * Air suspension / raising and lowering function * Lift axle: 1st axle * BPW support legs * WABCO Smart Board * Tyres: 385/65 R 22.5 * Remaining tyre tread: Front approx. 10/50%, Middle approx. 20/80%, Rear approx. 70% * 3 x BPW axles with disc brakes * PVC storage box Body: * Cargo Floor moving floor system * Volume: approx. 89 m³ * Sliding roof tarpaulin * Standing platform with walkway on left and right sides Weights: * Gross weight: 39,000 kg * Payload: 31,400 kg * Unladen weight: 7,600 kg Other: * German registration New general inspections / safety checks or weight reductions/increases are available upon request. We are happy to assist you in obtaining export/transit license plates, and can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, subject to change, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 m² you’ll find a large selection of vehicles. Our business philosophy is characterized by fairness and integrity. Customer satisfaction is of utmost importance to us, which is why we offer our clients an excellent all-inclusive service package, providing them with a competent representative to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist with loading your purchased vehicles. Dcsdpfx Aoylrp Tefueh Arranging special transports We are happy to assist in organizing special transports. Temporary / export license plates We are happy to assist in obtaining export and short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Model: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Version: water-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition as shown in the photos. Manual operation / Stop display. Actual temperature: 16.59 °C Setpoint temperature: 5.00 °C Actual humidity: 39.7% r.h. Water reservoir: 11.0 l Special Features: Extended temperature range up to +210 °C (most standard models only up to +180 °C) Technical Data: Temperature range: -70 °C to +210 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical Data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Degree of protection: IP 22 Refrigeration System: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure Data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test Chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual display Specimen protection / temperature limiter DI water connection Condensate drain Cable port openings RS232 interface Digital outputs for specimen control Scope of Delivery: CTS Climate Test Chamber C-70/600 Delivery as pictured Service / Preparation: Dcedpoy I Tdxefx Afush Functional check and replacement of necessary components Refill with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection possible by appointment Loading can be arranged Commercial sale – sold without warranty. (Subject to change and errors excepted)

Koşul: ikinci el, kilometre: 595.482 km, güç: 355 kW (482,67 bg), ilk tescil: 05/2018, yakıt türü: dizel, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.050 mm, yakıt: dizel, renk: diğer, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, toplam uzunluk: 6.410 mm, toplam genişlik: 2.550 mm, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 4.400 kg, izin verilen aks yükü (aks 3): 11.500 kg, Üretim yılı: 2018, Donanım: ABS, elektrikli ayna, elektrikli cam sistemi, klima, park ısıtıcısı, = Diğer seçenekler ve donanımlar = - Kaldırılabilir aks - Uyku kabini - Kuyruk mili (PTO) = Diğer bilgiler = Teknik Bilgiler Silindir sayısı: 6 Motor hacmi: 12.902 cc Aks konfigürasyonu Maksimum ön aks yükü: 8.000 kg Arka aks 1: Maks. aks yükü: 4.400 kg Arka aks 2: Maks. aks yükü: 11.500 kg Dcedpjy Ewu Aofx Afuoh Ağırlıklar Boş ağırlık: 8.389 kg Yük kapasitesi: 15.511 kg Azami toplam ağırlık: 23.900 kg Maksimum çekiş kapasitesi: 50.000 kg İç mekân Koltuk sayısı: 2 Kimlik Plaka: 04-BKT-3

Koşul: ikinci el, kilometre: 601.409 km, güç: 355 kW (482,67 bg), ilk tescil: 05/2018, yakıt türü: dizel, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.050 mm, yakıt: dizel, renk: diğer, vites türü: otomatik, emisyon sınıfı: Euro 6, toplam uzunluk: 6.410 mm, toplam genişlik: 2.550 mm, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 4.400 kg, izin verilen aks yükü (aks 3): 11.500 kg, Üretim yılı: 2018, = Diğer seçenekler ve donanımlar = - Kuyruk mili = Diğer bilgiler = Teknik bilgiler Silindir sayısı: 6 Motor hacmi: 12.902 cc Aks konfigürasyonu Maksimum ön aks yükü: 8.000 kg Arka aks 1: Kaldırılabilir aks; Maks. aks yükü: 4.400 kg Arka aks 2: Maks. aks yükü: 11.500 kg Ağırlıklar Boş ağırlık: 8.439 kg Yük kapasitesi: 15.461 kg Azami toplam ağırlık: 23.900 kg Maksimum çekme kapasitesi: 50.000 kg İç mekân Koltuk sayısı: 2 Dcedpey Uh Hnefx Afuoh Kimlik Plaka: 03-BKT-3

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Specifications Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in door Stainless steel test chamber Specimen protection / temperature limiter Internal lighting Side cable ports Cable entry ports approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Entry dimension (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of Conformity Test certificates Operating manual Monitoring messages and digital channels Installation plan Quick guide Humidity diagram Scope of Delivery Djdpfx Afey Iam Hjuech CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Pre-shipment Service (optional) Functional test Refrigerant service Leakage test Trial run with protocol Condition Used. Condition as seen in images. Note Used equipment, sale without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and technical changes. If you have any questions, please contact us.

Koşul: ikinci el, kilometre: 498.463 km, güç: 346 kW (470,43 bg), ilk tescil: 03/2020, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 01/2026, frenler: retarder, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, Araç No.: AV 006-24 MAN 18.470 TGX LX Walkingfloor ve damper için hidrolik sistem! İlk tescil: 03.2020 * Euro 6d * Intarder * Dingil mesafesi: 3.900 mm * Boş ağırlık: 7.049 kg * Hidrolik sistem: Hyva * 5. Teker yüksekliği: 1.130 mm * 1 x yatak * Döner uyarı lambaları * Ön aks yaprak yaylı * Lastik durumu: yaklaşık %50 * Alman aracı Dsdpfx Asyu D Imofuoch Araçlarımızı çalışma saatlerimiz içinde dilediğiniz zaman görebilirsiniz, test sürüşü randevu ile mümkündür! İhracat satışlarında bir depozito alınır, bu depozito yetki belgesi alındıktan sonra iade edilir. Araçlardaki firma ve reklam logoları, fotoğraflarda dijital olarak düzenlenmiş olabilir. Ekstra donanımların çalışır durumda olduğuna dair herhangi bir garanti verilmemektedir. Tüm bilgiler garanti verilmeden sunulmuştur – hata, değişiklik, yazım hatası ve ara satış hakkı saklıdır. Araç açıklamaları açıkça garantili özellikler değildir. Genel satış şartlarımıza (AGB) bakmanızı ve dikkate almanızı rica ederiz.

Koşul: mükemmel (kullanılmış), ESPEC ARS-0680-AE Environmental Test System Type: ARS-0680-AE Manufacturer: ESPEC Design: Environmental Test System with external stainless steel test chamber Djdpfxsy H H Uhj Afuech For sale is a complete ESPEC Environmental Test System for temperature, climate, and automotive testing. The system consists of two ESPEC climate test chambers model ARS-0680-AE and an external stainless steel test cell mounted on a mobile frame. The external stainless steel chamber serves as the actual test space for larger test items such as vehicle headlights, lighting modules, electronic components or automotive assemblies. The two ESPEC climate chambers create the required temperature and climate conditions for the external test chamber. Condition / Display: Used equipment, see pictures for optical condition. Both units display STOP / ready for operation. Operating hours according to displays: Approx. 5,887 h Approx. 6,950 h Special Features: Complete environmental test system with external stainless steel test chamber. Especially suitable for complex test tasks on larger or externally connected test specimens. Technical Data of Climate Chambers: 2x ESPEC ARS-0680-AE Years: 2017 / 2018 Test Chamber Volume: approx. 680 liters each Temperature range: approx. -70 °C to +180 °C Humidity range: approx. 10 % to 98 % r.h. Temperature change rate: up to approx. 4–6 K/min Internal dimensions (W x H x D): approx. 850 x 1000 x 800 mm External dimensions (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data: Connection: AC 400 V / 3~ / 50 Hz Max. Current consumption: approx. 22–27 A Weight: approx. 505–615 kg per unit Refrigeration System: Air-cooled cascade refrigeration system No external water connection required Refrigerants according to nameplates: R23 – 0.65 kg R452A – approx. 2.1 – 2.3 kg External Stainless Steel Test Cell: External remote test chamber on mobile steel frame Large test space for bulky test specimens Interior made of stainless steel Front opening with all-round seal Multiple toggle latches Side feedthroughs / connection ports Insert shelf / test support included Heavy-duty casters Equipment: 2x ESPEC climate test chamber ARS-0680-AE External stainless steel test cell Touchscreen operator panel Program and constant operation Temperature and humidity operation Viewing window Stainless steel test chambers Interior lighting / chamber lamp Side pipe and cable feedthroughs Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity operation Mobile version Scope of Delivery: 2x ESPEC climate test chamber ARS-0680-AE 1x external stainless steel test cell on mobile frame Available connection cables / accessories as available Available documentation as available Scope of delivery as shown Note: This is a custom special test system. The two ESPEC climate test chambers and the external stainless steel test cell are a combined system and are only offered together as a complete package. Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerants (if required) Leak test with certificate Documented test run Miscellaneous: Viewing possible by appointment Loading can be arranged Commercial sale – sold as-is without warranty. (Subject to changes and errors)

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Version: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climatic testing. Intended for use in research, development, and quality assurance. Operating Condition Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7% rH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Tube lead-throughs RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (where available) Pre-delivery service (optional): - Function test - Refrigerant service - Leak test - Test run with protocol Dedpfoy H H D Ajx Afujch Condition Used. Condition as shown in photos. Notice Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber by CTS. Suitable for temperature, climate, and stress screening tests. Designed for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (bleed water bath). Operating Hours Total: 19,788 h Compressor Cooling: 8,699 h Compressor Pre-cooling: 11,432 h Circulation Pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 litres Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t Dcsdoy H Hmwopfx Afueh GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Test item protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water replenishment possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Feedthroughs 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-Delivery Service (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. For visual condition please see pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber by CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Dodpfxjy H Hl Hs Afujch Digital set/actual value display Test object protection / temperature limiter Water connection (demineralised water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Pre-delivery service (optional) - Functional check - Refrigerant service - Leak test - Test run with report Condition Used. Visual condition as per photos. Note Used equipment, sold without warranty. Inspection by prior arrangement possible. Loading and transport can be organised on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Design: Temperature shock test chamber Cooling unit: water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and cyclic temperature testing. Applications in industry, research, and quality assurance. Areas of Application - Materials testing - Aging tests - Electronics and component testing - Temperature shock testing - Automotive and quality assurance Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +100°C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Cooling System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg Dedpfjy H Hk Ajx Afusch CO₂ Equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor control - Programmable operation - Digital set/actual value display - 2-zone system - Transfer basket for rapid switching - Viewing window - Integrated control cabinet - Cooling water connections Technical Design - Separate hot and cold chambers - Stainless steel test chamber - Industrial design Dimensions Dimensions: External (H x W x D): approx. 2450 x 2160 x 2200 mm Internal (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit diagram and piping scheme - Spare parts list Pre-shipment Service (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Visual condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (as far as available) Note Used equipment, sale without warranty. Inspection by appointment possible. Loading and shipping can be organized upon request. Subject to prior sale and technical modifications. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Type: TSS-70/350-A Water-cooled chiller unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Fields of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and thermal cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Cooling system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital display of set and actual values - 2-zone system (hot and cold chamber) - Automatic transfer basket for shock tests Technical configuration: - Separate hot and cold chambers - Shuttle basket system for rapid temperature change - Test space made of stainless steel - Insert shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Dedpfx Aoy Hkgbofujch Further data: Degree of protection: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) For further questions, we are happy to assist by phone.

Koşul: mükemmel (kullanılmış), CTS type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is used for conducting thermal shock tests and is typically employed in industry, research, and quality assurance applications. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: - Timewise: ±1 K - Spatial: ±2 K Temperature change speed: - Maximum 100 K/min on average for shock test procedures without radiant heat Temperature transfer time: Djdpfx Asy Hkd Hjfuech - ≤ 15 min in the range of -65°C to +200°C with 10 kg ICs Changeover time: -

Koşul: mükemmel (kullanılmış), CTS Type: C-70/600 CTS Climate Test Chamber C-70/600 air-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industrial applications. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerant: R404A (precooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control panel with digital set/actual value display Specimen protection / temperature limiter Water connection / deionized water feed Test chamber and condensate drains Sidewall cable ports in the test chamber RS232 interface as per documentation Dcsdpfx Afjy Hkazoujh Digital outputs for specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including available documentation / operating instructions Scope of delivery as shown in the pictures For your safety as a buyer: The device can be inspected by appointment. Forklift loading can be arranged. For your safety as a buyer, please note the following information! The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (We reserve the right to make changes and corrections to technical data and information!) We are happy to answer any further questions for you by phone.

Koşul: yeni gibi (kullanılmış), Çalışma ölçüleri: Dcjdpfjzbi Rmex Afuoh Çap: 1,80 m Yükseklik: 1,70 m Kazanlar, ısıtıcı bir oda gibi çalışan buharlı bir ceketle donatılmıştır; kap içerisine sarılır ve ısı belirli bir basınç altında dairesel şekilde yayılır. Buhar, bir buhar kazanı tarafından sağlanır. Genellikle endüstriyel düzeyde besleyici gıdalar, reçeller, jöleler, çikolata, şekerleme, konserve, et, sos vb. ürünlerin işlenmesinde kullanılır.

Koşul: ikinci el, Üretim yılı: 2014, vites türü: diğer, ilk tescil: 01/2014, renk: turuncu, kilometre: 1.001 km, şoför kabini: diğer, Araç yeri: Bovenden,\nTemizleme genişliği yaklaşık 2800 mm! AKSESUAR BİLGİLERİ GARANTİSİZ, değişiklik, ara satış ve hatalar saklıdır! Dedpfxey Ralbj Afuech

Üretim yılı: 2022, Koşul: ikinci el, Gs international 12t Dcodpfx Afey Tltcoujh Model yılı: 2022 Genişlik: 2,25 m Hidrolik olarak ayarlanabilir Taşımacılığınızı da organize edebiliriz.

Koşul: yeni, Basınç: 100Motor: 15Kurulum yüksekliği: 500Strok uzunluğu (maks.): 400Tablo boyutu: 800 x 600İtme yüzeyi: 800 x 600Tablo yüksekliği: 850Boyutlar (UxGxY): 1.300 x 2.000 x 2.750Ağırlık yaklaşık: 5.500Yağ doldurma: 200Kontrol / anahtar anahtarı: 1. kurulum modu Işık sensörü olmadan manuel (maks. 10 mm. /sn. hız). 2. ışık sensörü ile otomatik (tam hız) Ana silindir: Ø 230mm. Yardımcı silindir: 2 adet Ø 50 x 30mm. Yardımcı kılavuz: 2 adet Ø 50mm. Motor: 11 kw. 15 hp. ( IE-3 ) Pompa: 23 litre / ASC. Hız: Akış 110mm./sn. – dönüş 200mm./sn. - Basınç: 9mm./sn. Kurulum yüksekliği: 500mm. Strok uzunluğu: 400mm. Dcodpfjm Nntyjx Afueh Masa tablası: 800 x 600 – (T – oluklu) (müşterinin isteklerine göre tasarım mümkündür). Piston plakası: 800 x 600 – (T – oluklu) Masa yüksekliği: 850 mm. (zeminden masa üstü üst kenarına) ----- Aksesuarlar Hidrolik: Hidrolik kontrol bloğu ve aksesuarları: REXROTH PLC üzerinden basınç ayarı. (20 – 100 ton) PLC üzerinden ayarlanabilir hız. Hava soğutucu Ön dolum vanası Aksesuar kontrolü: Siemens S7-1200 Ana kontrol kutusu Döner kontrol paneli Güvenlik PLC'si. SICK Işık sensörleri SICK 700 + 150mm. Strok uzunluğunu ayarlamak için doğrusal ölçek 9” PLC ekranı – Siemens (Almanca ve İngilizce) Hareketli iki elle kullanım Uzaktan bakım için Ethernet bağlantısı Arızalar için alarm dedektörü (ışık ve ses) 2 katlı çalışma alanı aydınlatması Harici bağlantılar için PLC üzerinde 8 serbest AÇMA ve KAPAMA anahtarı Pres, Makine Direktifi ile uyumludur Hidrolik oransal valfler Çift kanallı kablo koruması Kullanım kılavuzu ve parça listesi (Almanca) Yan güvenlik kapılı (kapılar geriye doğru hareket ettirilebilir)

Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, Der ibg Ring Tester Large ist für die automatisierte Rissprüfung von Lagerinnen- und -außenringen mit Durchmessern von 45 – 100 mm ausgelegt. Das System führt zunächst eine Gefügeanalyse durch, gefolgt von einer Zeilenscan-Prüfung der Laufbahnen sowie des Innen- und Außendurchmessers. Die Auswertung erfolgt durch den eddyvisor C. Nach der Prüfung erfolgt eine automatische Klassifizierung und Sortierung der Prüfteile in IO (in Ordnung) und NIO (nicht in Ordnung). Die Prüfeinheit ist auf einem robusten Metallrahmen montiert, der auf industrielle Produktionsumgebungen ausgelegt ist und integrierte Stellflächen für die Stahlschränke mit Messtechnik und Steuerung (inkl. Siemens SPS) bietet. Saubere, aufrecht stehende Komponenten werden vereinzelt, einem Transportrad zugeführt und mit Riemenantrieb in Rotation versetzt. An der Prüfstation fixieren verstellbare Rollen die Ringe seitlich, während die Sonden die Oberflächen auf Fehler prüfen. Anschließend erfolgt die automatische Sortierung in IO und NIO. Vor der Prüfung müssen die Ringe partikelfrei und ohne anhaftende Flüssigkeit sein. Das System arbeitet nach dem ibg Good-Part-Only-Prinzip, während NIO-Muster ausschließlich zur Überprüfung der Detektionsleistung während Testläufen eingesetzt werden. Einlaufhöhe: 1.550 mm, Auslaufhöhe: 1.220 mm. Dedpfx Ajy H Dkajfujch Weitere Informationen finden Sie auf unserer Website.

Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, Der ibg Ring Tester Small ist für die automatische Rissprüfung an Innen- und Außenringen von Lagern in Verbindung mit dem eddyvisor C konzipiert. Sowohl die Laufbahnen als auch die Innen- und Außendurchmesser können jeweils mittels Linienabtastung mit ein oder zwei Sonden geprüft werden. Nach der Prüfung erfolgt eine Sortierung der Teile in OK und NOK. Das Prüfsystem ist auf einem robusten Metallrahmen montiert und somit ideal für den Einsatz in Produktionsumgebungen geeignet; es bietet Platz für die Stahlschränke mit den Messgeräten und der Steuerung (inkl. Siemens SPS). Das Inspektionssystem nutzt eine oder zwei Sonden für die Linienprüfung der Laufbahnen sowie der Innen- und Außendurchmesser. Gereinigte, aufrechte Prüfteile werden vereinzelt und einem Transport-Rad zugeführt, in dem sie durch umlaufende Bänder beschleunigt und in Rotation versetzt werden. An der Prüfstelle fixieren verstellbare Rollen die Werkstücke seitlich, während die Prüfsonden nach Oberflächenfehlern abtasten. Anschließend erfolgt eine Sortierung in OK und NOK. Die zu prüfenden Ringe müssen partikelfrei und frei von auftretender Flüssigkeit sein. Die Systemeinrichtung erfolgt nach dem Good-Part-Only-Prinzip von ibg. NOK-Master werden ausschließlich zur Überprüfung der Detektionsleistung im Versuch verwendet. Teilezulauf in 1350 mm Höhe, Teileauslauf bei 1150 mm Höhe. Djdpfx Aey H Dghofuech Weitere Informationen finden Sie auf unserer Webseite.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, HALBAUTOMATISCHE BAG-IN-BOX ABFÜLLMASCHINE Smurfit Kappa Vitop, ITALIEN, 2016 Abfüllvolumen für Beutel: 1L bis 28L Abfüllvolumen für Pouch-Up: 1L bis 3L Bedienfeld mit Touchscreen-Steuerung Die halbautomatische Abfüllmaschine Vitop wurde entwickelt, um flüssige und halbflüssige Produkte in Beuteln und Pouches abzufüllen. Djdpfx Afeyr Awbeuech Verbesserte Haltbarkeit der Flüssigkeiten dank des innovativen Füllventils, das Vakuum- und Stickstoffkreisläufe trennt Einfache Bedienung und Wartung Präzises elektromagnetisches Durchflussmessgerät für genaue Abfüllungen Hygienisch: Mit Reinigungs- und Desinfektionsprogramm ausgestattet Geeignet für Vitop® Original und Vitop® Compact Einfache Umstellung zwischen verschiedenen Größen Optional: Laminare Luftströmung für Abfüllung unter ultrareinen Bedingungen Die halbautomatische Abfüllmaschine Vitop ist besonders gut für mittelgroße Abfüller und Pouch-Up® geeignet und überzeugt durch exzellente Leistung und Zuverlässigkeit. Der Füller entfernt den Verschluss, entlüftet den Beutel vor dem Befüllen, füllt die gewünschte Menge Flüssigkeit ab und verschließt danach wieder. Am Ende des Zyklus wird Stickstoff eingespeist, um das Produkt optimal zu konservieren und das Ventilhalsstück zu reinigen. Eine optionale Laminar-Flow-Haube sorgt für eine mechanische Dekontamination im Bereich der Füllstation durch Überdruck.