Kullanılmış Acmi Formacartoni satın al (27)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Fumane (Verona)
2.126 km
Kasa Montajcısı
AcmiFormacartoni
Ara
Durum: ikinci el, Üretim yılı: 2009, Kullanılmış Acmi Case Erector 2009
Case Erector, ACMI tarafından 2009 yılında güvenlik önlemleri ve kullanım kılavuzları ile birlikte üretilmiştir. 8000 BPH hıza ulaşmaktadır.
Şu anda çalışmıyor, naftalinli.
Makine mükemmel durumda tutulmuştur ve hemen satışa hazırdır.
Lajdpfx Apovgurveyoc
Küçük ilan
Fumane (Verona)
2.126 km
Kasa Paketleyici
AcmiINSER 2C
Ara
Durum: ikinci el, Üretim yılı: 2009, Kullanılmış Acmi Case Packer 2009
ACMI tarafından 2009 yılında üretilmiş, güvenlik önlemleri ve kullanım kılavuzları ile birlikte kullanılmış Koli Paketleme makinesi. Saatte 8000 şişeye kadar hıza ulaşır. Şu anda depoda tutulmaktadır.
Makine mükemmel durumda ve satışa hazırdır.
Laedpfx Asvgurpopyjc
Küçük ilan
Menslage
2.589 km
ACMI BLO2FILL şişirme makinesi, dolum makinesi, kapak kapama makinesi, Combiblock (2026)
ACMIBlasmaschine, Füller, Verschließer, Combiblock
Ara
Durum: ikinci el, Üretim yılı: 2026, Overview
This combi block consisting of blow moulder, filler, and capper was manufactured by ACMI (Italy). The machine is fully operable at ground level and offers outstanding efficiency with the advantage of a dual-cavity design (one mould = two bottles with up to 70 mm diameter). This results in up to 17% less floor space compared to conventional single-cavity systems with identical output, thereby improving production line accessibility. The increased throughput, especially for smaller formats, enables better utilization of downstream equipment in the production line, translating into an enhanced ROI for the overall investment (100% more output for small formats at less than 36% additional investment costs).
The BLO2FILL ESF 12/120/20 is engineered for the production of PET bottles, along with subsequent filling and capping within a single, integrated system. The machine is suitable for sparkling water, still water, and carbonated soft drinks.
Technical Specifications
- Output: up to 48,000 bottles/hour (500 ml PET)
- Formats: 500 ml PET bottles
- Applications: blow moulding, filling, and capping PET bottles
- Configuration: SBF412 rotary stretch blow moulder (2-cavity version)
- Filler: electronic volumetric with 120 valves
- Capper: fully electronic (FEC) with 20 heads
- Neck finish: 26/22 GME 30.40
- Closure types: plastic screw closures / snap-on closures
- Filling technology: electronic volumetric
Lajdpfsyzc Hpjx Apyjc
- Products: sparkling water, still water, carbonated soft drinks
- CO₂ content: up to 8.5 g/l
- Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks)
Scope of Supply
- Blow moulder | ACMI | SBF412 | Rotary stretch blow moulder (2-cavity) – suitable for 100% r-PET and lightweight preforms
- Filler | ACMI | ESF | Electronic volumetric filler with 120 valves
- Capper | ACMI | FEC | 20-head capper for screw and snap-on closures
- Closure feed | Waterfall orientation and operator-level feeding
- Preform orienter | Operator-level preform feed
- Preform infeed control | Control system
- Blow air recovery system | For pre-blowing and line recovery
- Cooling system | Water recirculation at combi interface
- Automation package | PLC teleservice, Ethernet, UPS, remote access
- Lubrication system | Automatic central lubrication
- Foaming unit | Automated system

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
İtalya
2.126 km
Kullanılmış komple dolum hattı, sade ve gazlı su için PET şişelerde – 25.000 şişe/saat.
Acmi
Ara
Durum: ikinci el, makine/araç numarası: LC600, Technical Specifications and Performance Data
This pre-owned bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for both carbonated and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow-molding machine upstream from the filler monobloc, making it ideal for flexible maintenance and line balancing.
Production Speed: 25,000 bph
Bottle Formats: Compatible with 0.5L bottles
Containers: Designed for PET bottle handling
Configuration: Non-combi (separate blow-molding and filling unit)
Main Components and Year of Manufacture:
- Sidel Universal SBO 14 blow-molding machine (2007)
- Sarcmi 70-10 ISO filler monobloc (1988 – fully overhauled in 2025)
- Sarcmi labeling machine (2011)
- Zambelli shrink wrapper (2004)
- Handle applicator (2004)
- ACMI twin-head palletizer (1992)
Advanced Automation and Control Systems
The line benefits from a modernized conveying and control system, with conveyor management and electrical control cabinets redesigned in 2010–2011. This upgrade improves module synchronization, enhances safety interlocks, and supports stable high-speed operation across blow-molding, filling, labeling, and packaging.
- Overhauled conveyor control and electrical cabinets in 2010–2011
- Integrated safety interlocks for secure operation at high throughput
- Non-combi architecture simplifies maintenance and phased upgrades
Production Line Integration Capabilities
Designed as a complete water bottling solution, this used bottling equipment provides seamless integration from blow-molding through to end-of-line palletizing. The non-combi layout allows independent operation and optimization of both the blow-molder and filler monobloc, facilitating format changes and maintenance without having to stop the entire line.
Inline process flow: Blow-molding → Filler monobloc → Labeling → Shrink wrapping → Handle application → Palletizing
Conveyor system overhauled for reliable accumulation and transfer
Suitable for carbonated and still water in PET
Machine Condition and Maintenance History
Lasdpsyk E Srefx Apyjc
This used bottling line has benefitted from targeted improvements in conveyor management and electrical control cabinets, completed in 2010–2011. A major highlight is the Sarcmi 70-10 ISO filler monobloc, originally built in 1988 and fully overhauled in 2025 to ensure maximum operational reliability. The line is described as in working condition and is offered as a ready-to-use industrial packaging solution.
- Sarcmi 70-10 ISO filler monobloc: overhauled in 2025
- Conveyor and electrical cabinet management overhauled: 2010–2011
- Well-known OEM components throughout the line
- Operational with current 0.5L PET format
Küçük ilan
Fumane (Verona)
2.126 km
Paletleyici
AcmiRASAR P180
Ara
Durum: ikinci el, Üretim yılı: 2007, Gebrauchter Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde
Allgemeine Merkmale des automatischen Palettierers
Der gebrauchte Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde ist ein konventioneller, automatischer Palettierer auf niedriger Ebene, der darauf ausgelegt ist, End-of-Line-Prozesse in Hochgeschwindigkeits-Abfüllanlagen zu optimieren. Das Modell wurde 2007 von dem italienischen Hersteller ACMI gebaut und bietet eine Nennleistung von 2200 Kunststoffkisten pro Stunde, was eine hohe Produktivität gewährleistet. Besonders geeignet ist die Maschine für Abfülllinien, die 1-Liter-Formate in Glas und PET verarbeiten. Das System legt besonderen Wert auf Zuverlässigkeit und Geschwindigkeit in anspruchsvollen industriellen Umgebungen.
Kompatibilität mit Flaschenkisten und Paletten
Der gebrauchte Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde verarbeitet effizient Kisten mit 12 Glasflaschen und ist somit ideal für Getränkeproduktionsstätten geeignet, in denen der Transport in Kisten Standard ist. Zudem arbeitet die Maschine mit Standard-CP1-Paletten (1000×1200 mm) und ist damit kompatibel mit gängigen Logistiklösungen. Ein integriertes Palettenmagazin minimiert den manuellen Aufwand. Dies trägt zu einem kontinuierlichen und automatisierten Betrieb bei und optimiert so den gesamten End-of-Line-Prozess.
Lajdpfx Aewimlxepysc
Transportsystem und Automatisierung
Dieses Modell verfügt über ein Niederflur-Transportsystem, das nicht nur die mechanische Konstruktion vereinfacht, sondern auch die Wartung erleichtert. Bediener können somit Inspektionen und Wartungsarbeiten effizienter durchführen. Der Palettierzyklus wird durch eine Siemens-SPS gesteuert, was für präzise Abläufe und hohe Zuverlässigkeit sorgt. Zusätzlich ermöglicht die SPS eine nahtlose Integration mit vor- und nachgelagerten Anlagen. Die Automatisierung unterstützt komplexe Anlagenlayouts, bleibt aber gleichzeitig bedienerfreundlich.
Sicherheitsfunktionen und Technische Dokumentation
Der gebrauchte Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde verfügt über sämtliche erforderlichen Sicherheitseinrichtungen zur Einhaltung aktueller Industriestandards. Dazu gehören physische Schutzeinrichtungen, Präsenzsensoren sowie Verriegelungen. Damit wird größtmöglicher Schutz für Bedien- und Wartungspersonal gewährleistet. Die vollständige technische Dokumentation ist im Lieferumfang enthalten und unterstützt Techniker bei Aufbau, Inbetriebnahme und Servicearbeiten. Die Anlage überzeugt somit nicht nur leistungstechnisch, sondern auch in puncto Sicherheit und Wartbarkeit.
Zustand und Wiedereinsetzbarkeit
Der gebrauchte Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde ist aktuell demontiert, was den Transport und die Lagerung erheblich vereinfacht. Die modulare Bauweise reduziert außerdem den Aufwand bei der Wiederinbetriebnahme, sodass das System schnell in bestehende Produktionslinien integriert werden kann.
Technisches Fazit zum gebrauchten Palettierer ACMI
Der gebrauchte Palettierer ACMI RASAR P180 2200 Kunststoffkisten – Stunde stellt eine hochspezialisierte und zuverlässige Lösung für Hersteller dar, die auf leistungsstarke Palettiersysteme angewiesen sind.
Küçük ilan
Menslage
2.589 km
ACMI Opera PRO 400 RF sıcak tutkal etiketleme makinesi (2025)
ACMIHeißleimetikettierer
Ara
Durum: ikinci el, Üretim yılı: 2025, Overview This roll-fed hot-melt labeller was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines and processes both cylindrical and shaped containers made of glass or PET. It applies wrap-around OPP labels at very high speeds while ensuring outstanding efficiency and reliability. The machine is equipped with advanced features such as automatic label splicing, brushless motor-driven feed screws, and remote support capability. It is currently available for sale.
Technical specifications
- Output: nominal 48,000 bottles per hour (maximum mechanical speed: 58,000 bottles per hour)
- Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label)
- Machine diameter: 1,320 mm
- Pitch: 125.60 mm
- Label type: Roll-fed OPP hot-melt wrap-around labels (30–40 µm thickness, 30–175 mm height)
- Plate rotation: Motorised belt (R version)
- Main drive: Servo motor
- Electrical connection: 400 V (+/-10 %), 50 Hz, 3PH + N + PE
- Conveyor height: 1,100 mm
- Conveyor chain: Plastic, flat, 82.5 mm, 4 mm thick
- Low-voltage control: 24 V DC
- Ambient conditions: 5–45 °C; altitude up to 1,000 m
Lajdpsxgik Ajfx Apyec
- Control cabinet: Stainless steel with integrated air conditioning
- Lubrication system: Central, manual
- Additional features: Automatic label splicing, double roll holder, quick-change platforms, fallen bottle detection device, remote maintenance
Küçük ilan
Kowalew
1.975 km
Kâğıt kutu üretim makineleri
SacmiTF70
Ara
Durum: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, Otomatik karton kutu form makinesi TF70 satışa sunulmaktadır.
Desteklenen boyutlar: min. 340x420 mm; maks. 1000x1300 mm
Ljdpfjzfh N Uox Apyoac
Kapasite: Maksimum 50 adet/dakika.
Küçük ilan
Fumane (Verona)
2.126 km
Kullanılmış Sacmi dolum hattı, Bag-in-Box ambalajlar için, saatte 650 torba kapasiteli
Sacmi
Ara
Durum: ikinci el, Üretim yılı: 2010, makine/araç numarası: LC420, Used Monoblock Filling Line Melegari up to 30,000 BPH
In the industrial filling sector, the Melegari monoblock filler FILLJET NP-B 60-60-18 stands out in particular. Designed to optimize production, it boasts a capacity of up to 30,000 bottles per hour (BPH). This analysis also evaluates its technical specifications, operational efficiency, and adaptability. Special emphasis is placed on its significant impact in still water bottling.
Operational Efficiency and Production Capacity
Manufactured in 2015 and still in operation, this machinery demonstrates both durability and reliability. Importantly, it processes PET containers in 0.20 L, 0.33 L, and 0.6 L sizes, providing substantial versatility in product formats. With a speed of 30,000 BPH, it showcases remarkable production efficiency and positions itself as a highly competitive option for high-volume facilities.
Lsdpfevvh Susx Apyjac
Components and Technological Innovation
The rinser integrates 60 grippers for effective single-bottle handling and ensures containers are clean prior to filling. Maintaining high hygienic standards is essential in the water bottling sector. In addition, the filler is equipped with 60 volumetric valves and fixed nozzles for precise filling, minimizing volume deviations and reducing product loss. The capper, with 18 heads for plastic screw caps, ensures secure and consistent sealing. Integrated safety features protect both the operator and the product.
Sustainability and Power Consumption
Operating at 380 V, 18 kW, and 60 Hz, the monoblock signals optimized energy usage. Its energy efficiency not only reduces environmental impact but also lowers operating costs.
Dimensions, Weight, and Maintenance of the Melegari Monoblock Filler
The dimensions are 6100 mm (L) x 4700 mm (W) x 3600 mm (H), with a weight of 12,000 kg. The monoblock requires careful planning in terms of space requirements. In addition, its clockwise rotation and comprehensive manuals facilitate maintenance and ensure an extended operational lifespan.
Conclusion on the Melegari Monoblock Filler
This analysis of the Melegari monoblock filler up to 30,000 BPH highlights its status as an advanced solution. By combining high production capacity, precise filling, energy efficiency, and straightforward maintenance, it proves highly attractive. Ultimately, it is ideal for optimizing production with a focus on sustainability and cost reduction.
Küçük ilan
Fumane (Verona)
2.126 km
Eti̇ketleme maki̇nesi̇
SacmiRMF/RA 1320 15T
Ara
Durum: ikinci el, Üretim yılı: 2006, Kullanılmış etiketleme makinesi SACMI RMF/RA 1320 15T 8000 bph'ye kadar
SACMI makinelerine giriş
Kullanılmış SACMI RMF/RA 1320 15T etiketleme makinesi şişeleme sektöründe yüksek performanslı bir çözümü temsil etmektedir. 2006 yılında üretilen bu model doğal olarak saatte 8.000 şişeye (bph) kadar işleme kabiliyetiyle öne çıkmaktadır. Bu da kesinlikle yüksek operasyonel verimlilik sunuyor. Makine, kesinlikle hassas ve kaliteli uygulama sağlayan 15 etiket uygulama kafası ile donatılmıştır.
Lodpfx Apovguayoyeac
Kullanılmış etiketleme makinesi SACMI RMF/RA 1320 15T'nin 8000 bph'ye kadar teknik özellikleri
SACMI RMF/RA 1320 15T modeli, S2 E2+S3 E3 ADH+CE+CM tipi ile yapılandırılmıştır; bu yapılandırma, ekipmanın farklı etiket türlerini yönetmedeki aşırı çok yönlülüğünün altını çizmektedir. Üç kendinden yapışkanlı istasyon ve iki soğuk tutkal istasyonunun entegrasyonu ile makine, etiketleme sürecini özelleştirmek için kapsamlı olanaklar sunar.
Merkezleme ve Kontrol Sistemi
Bu etiketleme sisteminin kendine özgü bir özelliği, optik merkezleme sistemi ile birleştirilmiş bir elektronik kamın varlığıdır. Bu ileri teknoloji, sürecin hassasiyetini ve tekrarlanabilirliğini göz önünde bulundurarak etiketlerin konteynerler üzerindeki konumlandırılmasını optimize etmenize olanak tanır.
Konteynerlerin Kapasitesi ve Uyumluluğu
SACMI RMF/RA etiketleme makinesi cam kaplarla çalışmak üzere tasarlanmıştır. Hacimleri 375 mm ile 1500 mm arasında değişmekte olup, işlenen son ürünün de teyit ettiği gibi şarap şişelerinin etiketlenmesi için son derece uygundur. Makinenin üretim kapasitesi ve çok yönlülüğü, orta ve büyük ölçekli şişeleme hatlarına uyum sağlamasına olanak tanır.
Kullanılmış etiketleme makinesi SACMI RMF/RA 1320 15T'nin 8000 bph'ye kadar Operasyonel Yönleri ve Bakımı
SACMI RMF/RA etiketleme makinesinin dönüş yönü saat yönündedir. Bu, aslında etiketleme makinesinin mevcut üretim ortamlarına entegrasyonunu etkileyebilecek bir tasarım seçimidir. Kullanım ve bakımı kolaylaştırmak için, makine hem kağıt hem de dijital formatlarda kılavuzlar içerir. Bu, teknik personel için gerekli teknik bilgilere tartışmasız bir şekilde kolay erişim sağlar.
Elektrik Verileri ve Sonuç
Enerji açısından bakıldığında, SACMI RMF/RA 1320 15T etiketleyici 50 Hz'de 400 V'luk bir elektrik güç kaynağına ihtiyaç duyar. Enerji tüketimi 13 Kw ve 22A akımdır. Bu veriler şüphesiz sistemin enerji verimliliğini vurgulamaktadır. Bu da işletme maliyetlerini optimize etmeyi amaçlayan endüstriler için önemli bir husustur.
Sonuç olarak, SACMI RMF/RA 1320 15T 8000 bph'ye kadar etiketleme makinesi, şişeleme sektöründe güvenilirlik, hassasiyet ve yüksek üretim kapasitesi gerektiren şirketler için değerli bir teknolojik varlık olarak kendini göstermektedir. Şarap şişelerinin işlenmesinde kanıtlanmış bir geçmişe ve çeşitli şişe formatlarını işleme esnekliğine sahip olan bu kullanılmış makine, sağlam bir operasyonel geçmişe ve sağlam bir teknik yapıya sahip bir çözümdür.
Küçük ilan
Parczówek
1.798 km
Hidrolik pres SACMI PH380
SACMIPH 380
Ara
Durum: onarım gereklidir (kullanılmış), Üretim yılı: 2000, Seramik karo üretimi için hidrolik pres SACMI PH380 – cihazın kumanda sistemi eksiktir.
Lajdpjxvdnbofx Apyjc
Küçük ilan
Fumane (Verona)
2.126 km
İkinci el etiketleme makinesi SACMI 2008 - 12000 şişe/saat
SacmiOpera 200 RF S1 E1
Ara
Durum: ikinci el, Üretim yılı: 2008, çalışma saatleri: 8.000 h, makine/araç numarası: ET229, SACMI OPP Roll-fed-Labeling Machine – Overview
This pre-owned SACMI OPP roll-fed labeling machine is configured for highly efficient wraparound labeling on PET bottles. Manufactured in 2008 and designed for modern beverage production, it can be seamlessly integrated into a used filling line or operated as a standalone station within industrial packaging environments. With a rated capacity of 12,000 bottles per hour, it is ideally suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI technology is renowned for durability, precision, and reliability, making this secondhand labeling solution an excellent choice for manufacturers seeking dependable filling equipment.
The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for various SKUs and seasonal product introductions. OPP film labels, applied as roll-fed wraparound labels, help reduce labeling costs while enhancing presentation quality with neat seams and consistent label placement. This configuration is a practical option for beverage production plants looking to increase or expand capacity, while maintaining a compact footprint and efficient integration into existing conveyor and material handling systems.
Technical Specifications & Performance Data
Manufacturer: SACMI
Year: 2008
Label Type: OPP film (roll-fed)
Production Speed: 12,000 bph (nominal)
Bottle Formats: 1.5L, 0.6L, 0.33L
Container Material: PET
Advanced Automation and Control Systems
The OPP roll-fed concept utilizes hotmelt application on the leading and trailing edges of the label for secure wraparound results. The design supports stable bottle handling, precise label guidance, and uniform cutting for premium product appearance. Controls are operator-friendly, with clear access to key settings and process parameters, enabling fast changeovers and setup adjustments.
Lodpjxvpd Usfx Apysac
Production Line Integration Capabilities
This labeling machine can be easily integrated into complete filling lines and industrial packaging systems. It can operate in sequence with upstream filling equipment and downstream inspection, packaging, or shrink-wrapping machinery. Format changes accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing flexibility for multiple products across beverage portfolios within a single production line.
Machine Condition & Maintenance History
The unit has approximately 10,000 operating hours. It is currently disconnected from utilities but can be powered for bottle transport demonstration. The machine can start and run, with labeling gluing disabled for demonstration purposes. Technical documentation is available to support commissioning, operation, and maintenance. Overall, the machine presents as a well-maintained used unit that...
Küçük ilan
Krotoszyn
1.978 km
Platformlu patates yıkama tamburu
Zacmi
Ara
Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Patates için kullanılan çelik platformlu yıkama tamburu
Zacmi markası
Tambur çapı 1180 mm
Platform yüksekliği: 2100 mm
Ledpfowatdisx Apyoac
Genel boyutlar: 5500mm x 2400mm x 4250mm.
Küçük ilan
Sevenum
2.652 km
Teleskopik cep doldurucu
Zacmi60P
Ara
Durum: iyi (kullanılmış), Teleskopik dolum makinesi
Marka: Zacmi
Tip: otomatik 60 cepli döner teleskopik dolum makinesi
Kapasite: 36.000 kutu/saat'e kadar
Çerçeve: paslanmaz çelik
Yön: sol-sağ
Lodpfeib A Idex Apyjac
Boyutlar: U x G x Y = 2.600 x 2.600 x 2.000 mm
Ağırlık: 1,500 Kg
Güç Kaynağı: 380 Volt + 50 Hz - 3 kW
Basınçlı hava: 6 Bar
Özellikler: içeri ve dışarı beslemeli çıta-bant konveyörü
yönlendi̇rme plakalari
üst teleskoplardan ürünü çıkarmak için döner fırça
yakınlık sensörleri ile ürün yükseklik seviyesi kontrolü
elektrikli dişli motor ile yükseklik adaptasyonu
toz tavanlı
Takım: 67mm set
Açıklama: elektrik dolabı / kontrol olmadan
olduğu gibi
veya özelleştirilmiş müşteri isteği
Küçük ilan
Fumane (Verona)
2.126 km
Eti̇ketleme maki̇nesi̇
SacmiSACMI OPERA RA 720 8T S3
Ara
Durum: ikinci el, Üretim yılı: 2005, çalışma saatleri: 35.000 h, Gebrauchte Flaschenetikettiermaschine SACMI OPERA RA 720 8T S3 bis zu 6.000 Flaschen/Stunde
Die gebrauchte Flaschenetikettiermaschine SACMI OPERA RA 720 8T S3 erreicht eine Leistung von bis zu 6.000 Flaschen pro Stunde. Sie ist eine effiziente und zuverlässige Lösung für Anwender, die große Mengen an Flaschen schnell und präzise etikettieren müssen.
Die SACMI OPERA RA 720 8T S3, Baujahr 2005, ist in hervorragendem Zustand und wurde kürzlich von einer unabhängigen Prüfstelle auf ihre ordnungsgemäße Funktion überprüft. Damit befindet sich die Anlage in betriebsbereitem und zuverlässigem Zustand und garantiert optimale Leistung.
Die gebrauchte Flaschenetikettiermaschine SACMI OPERA RA 720 8T S3 ist mit drei Etikettierstationen ausgestattet: für Vorder-, Rück- und Medaillonetiketten.
Zudem verfügt sie über eine mechanische Verstellung der Leimstationen, was einfache Justagen für präzises und individuelles Etikettieren ermöglicht.
Wie vielseitig ist diese gebrauchte Etikettiermaschine?
Die SACMI OPERA RA 720 8T S3 ist äußerst vielseitig: Sie kann verschiedene Flaschengrößen verarbeiten und lässt sich dank elektronisch gesteuerter Kurven auf beliebig viele Rotationen programmieren.
So können Etiketten in unterschiedlichen Größen an den Flaschenwänden angebracht werden, wodurch die Maschine für unterschiedlichste Produktionsanforderungen geeignet ist. Ihr Energieverbrauch beträgt ca. 6 kW, der Einlauf befindet sich auf der linken Seite, und die Maschine arbeitet im Stundenbetrieb. Die gebrauchte Flaschenetikettiermaschine SACMI OPERA RA 720 8T S3 bis zu 6.000 Flaschen pro Stunde kann zudem mit einem optischen Zentrierungssystem ausgestattet werden, das mit der aktuellen elektronischen Kurvenscheibe verbunden wird.
Lsdpfjw Iy Dqex Apyjac
So können Flaschen für das Aufbringen der Etiketten exakt positioniert und zentriert werden, um bestimmte Etikettiermuster und Umhüllungsdesigns passgenau einzuhalten.
Es sind noch viele weitere Ausstattungsvarianten möglich, um neue Etiketten auf neue, vom Käufer gewünschte Flaschenformate aufzubringen.
Küçük ilan
Fumane (Verona)
2.126 km
Eti̇ketleme maki̇nesi̇
SacmiOpera 400
Ara
Durum: ikinci el, Üretim yılı: 2010, Gebrauchte Sacmi Etikettiermaschine Opera Baujahr 2010, generalüberholt 2025
In der stark wettbewerbsorientierten Abfüllindustrie ist die Effizienz der Produktionslinie von entscheidender Bedeutung. Hier kommt die gebrauchte, im Jahr 2025 überholte Sacmi-Etikettiermaschine zum Einsatz – ein Gerät, das, obwohl nicht mehr fabrikneu, dank seiner robusten Konstruktion weiterhin herausragende Leistungen garantiert. Im Fokus steht das Modell Opera 400, Baujahr 2010, welches für seine Zuverlässigkeit selbst bei hohen Geschwindigkeiten bekannt ist.
Leistung und technische Daten:
Die gebrauchte Etikettiermaschine vom Typ Opera 400 überzeugt durch ihre Fähigkeit, mit beeindruckenden Geschwindigkeiten von bis zu 45.000 Flaschen pro Stunde (BPH) zu arbeiten. Ein wesentlicher Vorteil ist die vielseitige Verarbeitung verschiedener Flaschenformate: Sie verarbeitet 0,50 L, 1,0 L und 1,5 L Gebinde und ist damit prädestiniert für Produktionslinien mit häufigem Formatwechsel. Diese Etikettiermaschine wurde 2025 fachmännisch überholt.
Es handelt sich um eine generalüberholte OPP-Etikettiermaschine.
Durchgeführte Arbeiten:
- Überholung der Hubzylinder
- Überarbeitung der Platten
- Überholung der Leimwalze
- Austausch des Walzenmotors
- Installation neuer Schutzeinrichtungen
- Überholung der Druckköpfe
- Austausch aller Fühler der Leimerhitzung
- Austausch der Absaugschläuche und komplette Inspektion der elektrischen Anlage
Komponenten und Funktionalität:
Ausgestattet mit 25 Plattentellern nutzt diese gebrauchte Sacmi Etikettiermaschine eine mechanische Nockenbremse/Nockenkupplung für den Plattentransport, was Präzision und Synchronisation selbst bei hohen Geschwindigkeiten sicherstellt. Das Etikettenzuführsystem arbeitet als Rollfeed-Spule – ein Verfahren, das für seine Effizienz und die Reduzierung von Materialabfall geschätzt wird.
Lodpfxoxpuqts Apyjac
Die Maschine ist mit zwei Etikettierstationen für einen zweiphasigen Produktionsprozess ausgestattet; der rechtsdrehende Arbeitszyklus sorgt für einen optimierten Arbeitsfluss. Die Etikettiertechnik gewährleistet Genauigkeit, während die automatische Etikettenausrichtung und die manuelle Kopfverstellung Bedienfehler minimieren und die Effizienz der Produktionslinie sichern.
Optimierung und Wartung der gebrauchten Sacmi Etikettiermaschine:
Ein wesentlicher Vorteil einer gebrauchten Etikettiermaschine ist die Wartungsfreundlichkeit. Sacmi hat die Opera 400 mit einer manuellen Kopfverstellung ausgestattet, die Technikern eine direkte und präzise Kontrolle ermöglicht – essenziell für den langanhaltend optimalen Betrieb. Die automatische Etikettenjustierung sorgt zusätzlich für eine intuitive Bedienung und eine gesteigerte Produktivität.
Fazit:
Zusammenfassend ist die gebrauchte Sacmi Etikettiermaschine des Modells Opera 400 eine bewährte Lösung für Unternehmen, die Geschwindigkeit, Effizienz und Flexibilität ohne Qualitätsverlust kombinieren möchten. Obwohl es sich um ein Modell von 2010 handelt, sind seine technischen Eigenschaften nach wie vor auf dem neuesten Stand und machen sie zu einer klugen Investition für jede Abfülllinie.
Küçük ilan
Wiefelstede
2.603 km
Bıçak kafası SK50
TAC MILLØ 100 mm
Ara
Durum: iyi (kullanılmış), Freze kafası, freze tutucu, sert metal freze, değiştirebilir uçlu freze, yüzey freze kafası, freze başlığı
- Çap: Ø 100 mm
Ledpfxeb A Ihdj Apyeac
- Diş sayısı: 6
- Değiştirilebilir uçlar: Sert metal
- Tutucu: SK50
- Ağırlık: 4,5 kg
Küçük ilan
Lorquí
3.157 km
ZACMI teleskopik dolum makinesi
ZACMI
Ara
Durum: yeni gibi (kullanılmış), Orta ve büyük boyutlu bütün katı ürünlerin kutu, kavanoz, plastik kap vb. içerisine doğrudan doldurulması için uygundur. Ürünler: şeftali yarıları, armut yarıları, bütün soyulmuş domates, zeytin, salatalık, havuç, kayısı, enginar kalbi. Üretim kapasitesi, doldurulacak format ve ürüne bağlıdır.
Ljdpexp Rqpjfx Apyoac
Küçük ilan
Lorquí
3.157 km
ZACMI vakumlu sıvı dolum makinesi ve kapak kapama makinesi
zacmi
Ara
Durum: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, La cerradora de latas es la máquina utilizada para sellar herméticamente la tapa al cuerpo de la lata antes de la esterilización. Dependiendo del producto, la esterilización también puede realizarse antes del llenado.
El sellado de la lata se logra mediante la deformación y posterior solapamiento por compresión de las capas metálicas del cuerpo de la lata y la tapa.
Ljdpfx Ajynkc Depyoac
El resultado es una especie de enganche entre ambas partes que garantiza la unión hermética y, en consecuencia, la estanqueidad del envase. Este sellado requiere una junta de goma (gasket de sellado) insertada en el reborde de la tapa para lograr la máxima efectividad en la unión de las capas metálicas.
La producción dependerá del formato y del producto a cerrar.
Küçük ilan
Lorquí
3.157 km
S/S ZACMI çok kademeli lineer blancher/soğutucu
ZACMI
Ara
Durum: yeni gibi (kullanılmış), APTO PARA TODO TIPO DE PRODUCTOS: guisantes verdes, judías verdes, espinaca, zanahorias, okra, alubias, fresas, alcachofa, maíz dulce, brócoli, coliflor, champiñones, etc.
* CONSUMO DE AGUA: 1,5 L de agua x 1 KG de producto.
* CONSUMO DE VAPOR: 1,5 L de vapor x 4 - 7 KG de producto.
La máquina puede operar en tres versiones: con agua, con vapor o como humidificador (hidratación).
Versión Blancher para hidratación: En esta versión, la máquina está diseñada para completar la rápida rehidratación de cereales o legumbres iniciada por el pre-calentador.
- Módulo 1: su función es tratar el producto con pulverización de agua.
- Módulos 2, 4 y 6: funcionan con vapor. La temperatura es controlada por la sonda ubicada en el módulo 6, que gestiona la válvula modulante instalada en la línea de suministro de vapor al módulo 6, siempre que la válvula neumática de corte de vapor del módulo 2 esté abierta.
- Módulos 3 y 5: funcionan con agua fría atomizada.
Lasdpfx Aox S H U Sopyec
- Módulo 7: diseñado como enfriador agua-aire.
- Módulo 8: funciona con agua. Su temperatura no supera los 14ºC para reducir la temperatura del producto.
Versión Blancher por agua: En esta versión, la máquina trabaja en contracorriente, es decir, el producto se desplaza en sentido opuesto al agua de enfriamiento. Los siete primeros módulos están equipados con bandejas y filtro rotativo para la recuperación de agua, así como sus respectivas sondas de nivel y bombas de recirculación.
- Módulos 1, 2 y 3: función de pre-escaldado del producto.
- Módulos 4 y 5: diseñados específicamente para escaldado con agua caliente. El agua se recircula mediante bombas y la temperatura se controla en el módulo 4.
- Módulo 6: actúa como primer módulo de enfriamiento. Está equipado con una bomba by-pass para recirculación de agua calentada, enviada al segundo o tercer módulo. El suministro al tercer módulo se controla mediante una electroválvula.
- Módulo 7: función de enfriamiento mediante niebla de agua y extracción de aire húmedo por medio de un ventilador.
- Módulo 8: función de enfriamiento con pulverización de agua sobre y bajo la malla, el agua se recoge en el tanque de recuperación del módulo 8.
Versión Blancher por vapor: En esta versión, la máquina permite el escaldado de vegetales al vapor también en 8 módulos.
- Módulo 1: actúa como barrera para evitar pérdidas de vapor.
- Módulos 2, 3, 4, 5 y 6: funcionan con vapor. La temperatura es controlada por la sonda situada en el módulo 6, que acciona la válvula modulante de la línea de vapor hacia el módulo 6 cuando las válvulas neumáticas de corte de vapor están abiertas.
- Módulo 7: diseñado para enfriamiento AGUA-AIRE.
- Módulo 8: opera con agua, su temperatura no excede los 14ºC para minimizar la temperatura del producto.
Küçük ilan
Bovenden
2.411 km
Mobil beton santrali
MANTGS 18.440 4X4H BLS, STETTER AM10FHAC Mischer ca.
Ara
Durum: ikinci el, kilometre: 299.900 km, güç: 324 kW (440,52 bg), vites türü: mekanik, yakıt türü: dizel, renk: sarı, toplam ağırlık: 40.000 kg, boş ağırlık: 13.500 kg, azami yük ağırlığı: 26.500 kg, lastik boyutu: 315/80R22,5, dingil konfigürasyonu: 8x4, koltuk sayısı: 2, ilk tescil: 06/2013, emisyon sınıfı: Euro 5, frenler: motor freni, süspansiyon: çelik-hava, yükleme alanı hacmi: 10 m³, şoför kabini: gündüz kabini, dingil mesafesi: 3.600 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, ek farlar, her tahrikli, hidrolik, hidrolik direksiyon, hız sabitleyici, kabin, koltuk ısıtıcı, merkezi kilitleme, sisal lambaları, çekiş kontrolü, Vehicle location: Bovenden, with sleeper cab, 1x air-suspended seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, 16-speed manual transmission, ABS (anti-lock braking system), traction control (ASR), engine brake, PTO, high-mounted exhaust, differential lock, fog lights, beacon, leaf-air suspension, aluminum tank, low noise G1, roof hatch, green environmental badge.
Laodpsvy A I Sjfx Apysc
Wheelbase: 3600 mm
Body: Complete rig with STETTER AM10FHAC concrete mixer semi-trailer, approx. 10 m³, MAN HydroDrive, ZF 16 S 222 OD gearbox, MAN BrakeMatic, M-cab.
This offer refers to the complete rig, consisting of the tractor unit 85629 and the semi-trailer 85636!
Mileage: 303,725! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!
Küçük ilan
İtalya
2.465 km
OiMA SACMI 3300-180
OiMASACMI 3300-180
Ara
Durum: işlem için hazır (kullanılmış), Üretim yılı: 2009, sıkıştırma kuvveti: 3.300 kN, vida çapı: 180 mm, Bu OiMA SACMI 3300-180 2009 yılında üretilmiştir. Sağlam bir elektrikli-hidrolik hibrit tahrik ve entegre bir soğutma sistemine sahiptir. Makine, gerçek zamanlı izleme ve tanılama için GDNet iletişim arayüzü ile donatılmıştır ve orta ila büyük plastik bileşenlerin üretimi için idealdir. Bu OiMA SACMI 3300-180 hidrolik enjeksiyon kalıplama makinesini satın alma fırsatını değerlendirin. Daha fazla bilgi için bize ulaşın.
• Mevcut birimler: 2
• Kontrol sistemi: OIMA ECO NT3
Ljdpex D I R Ajfx Apyjac
• Enjeksiyon sistemi: Hidrolik
• Tahrik sistemi: Elektrikli-hidrolik hibrit
• Soğutma sistemi: Entegre
• Teşhis arayüzü: GDNet iletişimi (gerçek zamanlı izleme ve arıza teşhisi)
• Uygulamalar: Orta ila büyük ölçekli plastik bileşen üretimi
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Menslage
2.589 km
SIG Corpoplast, KHS Sacmi, Kisters, diğerleri PET (tek kullanımlık) için dolum hattı (2000)
SIG Corpoplast, KHSAbfülllinie für PET (Einweg)
Ara
Durum: ikinci el, Üretim yılı: 2000, Genel Bakış Bu komple PET dolum hattı, 2000 ile 2012 yılları arasında SIG Corpoplast, KHS, Sacmi, Kisters, Paxona ve diğerleri gibi tanınmış Avrupa üreticilerinden oluşan bir grup tarafından üretilmiştir. Tesis, gazsız ve karbonatlı meşrubat üretimine uygun olup, üfleme kalıplama makinesi, dolum makinesi, etiketleme makinesi, paketleme makinesi ve çeşitli taşıma ve muayene sistemlerini içermektedir. Sistem 1,5 lt'de saatte 36.000 şişeye kadar kapasiteye ulaşıyor ve hemen kullanıma hazır hale geliyor. Tüm makineler iyi bakımlı olup orijinal komponentlere ve ilgili çevre birimlerine sahiptir. Teknik veriler Performans: 1,5 L su için 36.000 bph 1,5 L meşrubat (tatlı) için 35.000 bph 1,5 L meşrubat (hafif) için 32.000 bph Formatlar: 0,5 L ve 1,5 L şişeler PCO 28-1881 kapatma Doldurulan ürün: Su ve karbonatlı meşrubatlar (7,5 g CO₂) Kapatma sistemi: Vidalı kapaklar, oluk ve damper üzerinden besleme (Zalkin + NSM) Paketleme: Shrink film: 3x2 şişe (çift şeritli) Palet tipi: Euro (1.200 x 800 mm) Düsseldorfer (600 x 800 mm) Elektrik verileri: 400 V / 50 Hz Kontroller: ABB, Siemens Çalışma yönü: Standart Teslimat kapsamı Streç üfleme kalıplama makinesi: SIG Corpoplast Blomax 24, üretim yılı 2008 24 istasyon, ısıtma fırını 20 kutu, ABB kontrol sistemi dahil. Preform damperli MD3, preform haznesi SBT, asansör HFT, konveyör RGTD, şut ASTK Hava taşımacılığı: NTS Mistral, 2000 yılında üretilmiştir Pnömatik olarak ayarlanabilir raylar, sepet kablo tepsisi Dolum makinesi: KHS Innofill EV-VF, 2000 yılında üretilmiştir 176 elektronik dolum valfi, valf manifoldu (APV), hava taşımacılığı, besleme vidası, sıkıştırma yıldızı Vidalı kapak (Zalkin, 22 kafa), kapak besleyici (NSM), köpük temizleme (ECOLAB, 2001), dozaj cihazları (2011) Karıştırıcı/hava giderme: KHS Innopro DX65 Contimix 65/5-T20, 2000 yılında üretilmiştir 65.000 l/h, 5 bileşen, Brix ölçer (Anton Paar), Hilge pompaları Etiketleme makinesi: Sacmi Opera 300 RF 26T/R S1E1, 2012 yılında üretilmiştir 26 plaka, Sıcak eriyen, sarma, rulo besleme, paralel besleme, emniyetli kaldırma versiyonu Muayene ve Kodlama: Dolum seviyesi ve kapak kontrolü: KHS Innocheck CUB Vision Circle, 2013 yılında üretilmiştir Şişe lazer kodlama: Muhafazalı Videojet Paket muayenesi: KHS Innocheck CUB, 2015 yılında üretilmiştir Paketleme makinesi: Kisters SP060V, 2000 yılında üretilmiştir Shrink paketleyici 3x2 (iki şerit), 60 çevrim/dakika, manuel şerit genişliği, yalnızca film Konveyörler ve paket etiketleme: Şişe konveyörü: KHS Innoline BTR, 2000 yılında üretilmiştir, plastik zincir, kuru yağlama Kutu konveyörü: Paxona + Schaefer, 2009 yılında üretilmiştir Kutu etiketleme: Contact 100, rolden kendinden yapışkanlı etiket
Lodpfewh U Avsx Apysac
Küçük ilan
Luckenwalde
2.241 km
Döner tabla ile MACminiEH
KitagawaRS160RAH01
Ara
Durum: ikinci el, Üretim yılı: 2001, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: E1334, Kitagawa döner tabla
Lodpfjyn Nvisx Apyeac
Model: RS160RAH01
Seri No: E 1334 - Üretim yılı: 11/2001
dahil MACminiEH kontrol ünitesi
Seri No: H980960364 - Üretim yılı: 11/2000
Küçük ilan
Druskininkai
1.878 km
Paletleyici ve paketleme makinesi
KEBER
Ara
Durum: iyi (kullanılmış), Üretim yılı: 1997, makine/araç numarası: 0488, KEBER Paletleyici & Streçleme Makinesi
[Yıl: 1997 sn: 0488 Model: 101]
~ 1700 paket/saat
Ledpfx Astgmwrspyoac
Streçleme makinesi [Yıl: 1997 sn: 0487 Model: MEC ARM]
Makineler çalışır durumdadır.
AYRICA SATILIK:
Paletleyici - ACMI - RASAR P135 H - 49.000 €
Yıl: 2000
ACMI s.r.l paletleyici ve streçleme makinesi, 5000ml PET şişe & EUR palet için kullanılmıştır
Seri No: C-1581
Küçük ilan
Fumane (Verona)
2.126 km
Kullanılmış Sidel Alsim PET dolum hattı, gazlı su ve içecekler için – 14.000 şişe/saat.
ACI
Ara
Durum: ikinci el, makine/araç numarası: LC594, Technical Data & Performance Specifications
This complete PET filling line is designed for carbonated water and soft drinks, delivering consistent performance and reliable quality for beverage production. It combines highly efficient stretch blow molding, isobaric filling, labelling, packaging, and end-of-line automation into a coherent used filling line, suitable for industrial packaging operations in the second-hand sector.
Production Speed: 13,000–14,000 bottles per hour
Containers: PET bottles, neck finish 28 1881
Blow Molding Machine: Sidel SBO10, 10 cavities
Preform Handling: Preform hopper Sidel EBH 2050
Air Conveyor: Sidel-Alsim
Rinser/Filler/Capper Monobloc: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K
Rinser: 48 clamps, 1 water treatment unit
Filler: 60 isobaric valves
Capper: 10 heads
Premix/Mixer: Sidel-Alsim, delivery rate 30 m³/h
Bottle Dryer: ACI
Labeller: Krones Contiroll, rotary, 15 plates, PET wrap-around, reel-fed
Shrink Packer: Acmi Fenix, film-only configuration
Lajdpfxsydn A Hs Apyjc
Handle Applicator: Smipack HA 35-50-70
Palletizer: Alsim Valiant 1I 1P, fully automatic, push type
Pallet Wrapper: PM Pragometal OBS Rotomatic Standard
Advanced Automation & Control Systems
The line integrates component HMIs and automatic control functions at each station to simplify operation and format changes. The isobaric filler block ensures precise filling of carbonated beverages, while the rotary reel-fed labelling system supports continuous high-speed label application. Quick-change mechanical settings and format parts help minimize downtime and reduce setup times in beverage production environments.
Production Line Integration
Designed for inline operation from preform loading to palletizing, the system features smooth bottle transfer using air conveyors and synchronized starwheels in the filler monobloc. It integrates upstream blow molding with downstream labelling, shrinking, handle application, and palletizing to create a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks, supporting multiple PET bottle formats and heights for neck finish 28 1881.
Machine Condition & Maintenance History
This used line is available for sale and is presented in operating condition. Component years range from 1996 to 2019, indicating a carefully selected array of filling equipment. Buyers can arrange inspections to evaluate performance, equipment condition, and full line integration prior to deployment in beverage production.
Operational Performance & Versatility
Optimized for carbonated products, the isobaric filler delivers precise CO₂ retention and foam control. The Sidel blow m...
Sizin için aramayı kolaylaştırıyoruz: "acmi formacartoni"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay




























































































































































































































