Kullanılmış Dimeco Bant Hattı (Haspel + Doğrultma Makinesi) satın al (32.115)

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, doğrultma silindiri sayısı: 7, bobin dış çapı: 1.400 mm, bobin iç çapı: 508 mm, merdane çapı: 80 mm, besleme silindiri sayısı: 2, besleme merdanesi çapı: 80 mm, düzleştirme silindiri çapı: 80 mm, bobin genişliği: 400 mm, yük kapasitesi: 3.000 kg, 1. Decoiler Manufacturer: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil – Outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic pressure roller from above • 6 strip edge arms • Pneumatic disc brake 2. Straightening Machine Bdsdpfx Aetgvgpeh Uec Manufacturer: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 pcs. Number of inlet and outlet rollers: 2 pcs. each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip threading aid with supporting table, threading tongue, pressure arm from above • Pneumatically liftable feed roller • Lateral strip guide rollers • Pneumatically swiveling strip transfer table between straightener and feeder

Koşul: ikinci el, Strip Processing Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Bjdpfx Aeif Sg Ssh Uodc Sheet thickness with straightener active: 2 mm – Excellent equipment and introduction aids Overall system footprint (L x W): approx. 7000 x 3000 mm Total system weight: approx. 11 tons Good condition Straightening Machine HMS type RS 47-04/1, machine no. Strip width, nominal: 400 mm Strip width, max. clear opening: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pull rollers: 2 pcs Pull roller diameter: Ø 80 mm Entry/exit height: 1500 mm – Straightening rollers hardened, ground, and hard-chromed, with central support – Pull rollers hardened, ground, hard-chromed, with hydraulic lifting – Manual roll adjustment – Entry aid with hydraulically extendable tongue and hydraulically adjustable deflector roller – Lateral strip guidance adjustable – All straightening rollers powered via distribution gearbox and cardan shafts – Both pull rollers powered via gearbox and cardan shafts – Frequency-controlled drive via geared motors – Straightener opening stroke 250 mm for cleaning the line or running thicker material, lifting movement via trapezoidal lead screw – Ultrasonic loop control Shipping dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS type BA 1.5-06/80, machine no. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with loading carriage) Outer coil diameter: max. 2000 mm (without loading carriage) Coil support disc diameter: Ø 1700 mm Coil inner diameter, clamping range: 460-520 mm Coil width, nominal: max. 630 mm Clamping jaw width: 750 mm Hasp deck height above base plate: 1500 mm – Drive of decoiler crown via hydraulic motor and gear wheel – Pneumatic overrun brake on the decoiler crown TWINFLEX – Hydraulic expansion of the decoiler crown centrally via wedge slider system – Hydraulic hold-down arm with hydraulically driven double pendulum roller – Coil loading carriage with 12 t lifting capacity and 300 mm stroke – Decoiler on above-floor carriage with motorized cross-travel drive Shipping dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central hydraulic unit adjacent Tank capacity: 350 liters Drive power: 18.5 kW – Drive motor with 2 REXROTH pumps (tandem pump) – Oil cooler as air heat exchanger with fan motor Shipping dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical cabinet adjacent – All cable connections via Harting connectors Shipping dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Üretim yılı: 2006, Koşul: ikinci el, kenar kalınlığı (maks.): 12 mm, X ekseni ilerleme hızı: 40 m/dak, plaka yüksekliği: 60 mm, plaka boyu: 2.400 mm, plaka genişliği: 1.000 mm, makine/araç numarası: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! The machine must be collected between 10.06.26 and 30.06.26! The machine package consists of four machines, configured as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of stacker stations: 2 Control system: KR C 2 Movement system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, Laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure roller system Panel support guides NC positioning Panel infeed alignment system Panel formatting/milling units: Unit 1: Pre-milling unit Automatic timed engagement NC positioning unit Unit 2: Double milling unit, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatic timed engagement NC positioning Gluing and edging system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating panel edges Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Bsdey Ur Hlspfx Ah Usdc Number of motors: 2 NC positioning Edge processing unit 2: Coarse milling top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius trimming Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change NC positioning Edge processing unit 5: Milling/roughing unit Number of motors: 1 Motor power unit 5: 12 kW Speed unit 5: 10,000 rpm Automatic tool change NC positioning Edge processing unit 6: Scraper blade for edges NC positioning Edge processing unit 7: Glue scraper blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and features Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of stacker stations: 2 Control system: KR C 2 Movement system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Return conveyor for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Koşul: ikinci el, Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, – Condition: very good – Year of manufacture: 2010 – DTR (technical documentation) included TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm Bsdpfx Asw H Rzxoh Uodc – Saw trimming unit – Milling unit for flush or profile edge trimming – Designed for removing edge overhang on the top and bottom of the panel – Flush trimming – Edge milling at an angle or radius in a single pass – Overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS PERFORMED BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO OPERATE – Table size: 2000 x 300 mm – Air requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue pot – Grooved glue application roller ensures even distribution along the workpiece edge – Feed rate: 9 m/min – Dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Koşul: ikinci el, Üretim yılı: 2000, Grindingmaster Satinaj Makinesi Genişlik: 1000 mm Bjdey Uaf Njpfx Ah Uedc

Koşul: mükemmel (kullanılmış), Üretim yılı: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and one motor, top sanding Working width: 1100 mm Abrasive belt dimension: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Shore 2nd Unit: Sanding pad, rigid & air cushion sanding pad, timer controlled Compressed air requirement approx. 6 bar Extraction port diameter: 2 x 150 mm Dimensions approx. L x W x H = 1700 x 1750 x 1800 mm Weight approx. 1400 kg Automatic workpiece thickness adjustment with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers at infeed and outfeed Emergency stop Main switch CE compliant INCLUDES numerous sanding belts INCLUDES 2 new graphite sanding pad inserts NEW ball bearings for the deflection rollers NEW V-belts for the drive motor Note for used machines: • Technical information subject to error and prior sale. • Prices quoted are ex works - free loading! • The machine has been cleaned and tested for functionality. • All machines are sold as viewed, without any claim to warranty. Bdedpey Exhwsfx Ah Uec Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Koşul: mükemmel (kullanılmış), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction connection diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Fixed sanding pad for fine sanding of solid wood & pneumatically controlled, time-regulated sanding pad for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Transport belt oscillation pneumatic Motorised workpiece thickness adjustment with LED display Units equipped with emergency brake system Emergency stop button at machine infeed Roller table extension at infeed Complete documentation Used machine notice: • Subject to technical changes and prior sale. • Prices are ex-site, loaded free on truck! Bodeych Igjpfx Ah Ujdc • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Koşul: mükemmel (kullanılmış), Üretim yılı: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction connection diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, diameter 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), rigid sanding shoe Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunctional display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Bodpfxeychqzj Ah Ujdc Motorized setting of workpiece thickness with LED display in 0.1 mm increments Units with emergency brake device Emergency stop button at infeed and outfeed Motor protection switch Infeed roller table extension with 2 loose rollers Automatic star/delta starter Complete documentation Note on used machines: • Technical data may be subject to error and prior sale. • The stated prices are ex works, free loaded at location. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Koşul: mükemmel (kullanılmış), SCM Sandya UNO - 90 cm zımpara genişliği - 11 kW gücünde bir motor iki birimi çalıştırır - Zımpara tablası - İlk birim çelik mili, ikinci ise kauçuk kaplı silindiri ve zımpara tablasını kalibre eder - Fotoelektrik salınım, düşük hava basıncı ihtiyacı Dış ölçüler: Uzunluk 170 cm, genişlik 145 cm, yükseklik 174 cm (makine 162 cm + 12 cm ağızlık) Ağırlık 1100 kg Videoyu izleyin Bdsdjza T Rhopfx Ah Uec

Koşul: iyi (kullanılmış), SCM Sandya Uno Wide Belt Sander Working width: 900 mm Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Bsdpfx Ahoy Sr Rrj Usdc Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5-9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Koşul: ikinci el, Kündig ENORM PRIMO – TOP SABİT MASALI MAKİNE / otomatik kafa ayarı Geniş bantlı kalibrasyon ve ince zımpara makinesi Kombine ünite: temas silindiri ve pnömatik zımpara pedi Enormatic İş parçası kalınlığı için dijital kalınlık göstergesi Bant tahrik motor gücü yaklaşık 9 kW Temas silindiri seviyesi, tane ölçeğine göre kademesiz ayarlanabilir Giriş ve çıkış masası, makaralı destekli Bdsdpfsy Tutrox Ah Uoc Çalışma genişliği 1100 mm Besleme hızı 2,5 - 15 m/dak Makine ATÖLYEDE KOMPLE YENİLENECEKTİR Lieboch stoktan

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2022, çalışma saatleri: 0 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: levellers, doğrultma silindiri sayısı: 21, çalışma genişliği: 1.300 mm, sac kalınlığı (maks.): 6 mm, maks. sac kalınlığı çelik: 4 mm, alüminyum sac kalınlığı (maks.): 6 mm, konveyör bant genişliği: 2.000 mm, giriş voltajı: 400 V, plaka genişliği: 1.300 mm, düzleştirme silindiri çapı: 80 mm, Blechrichtmaschine MC 1300 x 0,8 bis 6 mm / Walzen aus Stahlqualität 42NiCrMo4, gehärtet auf 62 HRC, spiegelpolierte Oberfläche / Schutzeinhausung um die Maschine / Einlaufrollentisch 2 m motorisiert vorwärts & rückwärts / Auslaufrollentisch 2 m motorisiert vorwärts & rückwärts / Spalt- und Durchmessererkennung an den Richtwalzen / Schnellwechselsystem für Walzenpakete, mit motorisch höhenverstellbarem Lade-/Entladetisch / Synchronisierte Geschwindigkeit zwischen Richtwalzen und Ein-/Auslaufrollentischen / Blechpositionsüberwachung während des gesamten Richtvorgangs / Wärmetauscher, Flüssigkeitskühler, automatische Abschmieranlage - CNC-gesteuerter Richtprozess, programmierbare automatische Abläufe / Netzwerkverbindung zur Fernüberwachung und Datenaustausch zwischen Maschine und CAD-Station / Materialdatenbank zur Qualitäts- und Härtekontrolle Bdedpsy Uvutjfx Ah Usc - Technische Daten: Arbeitshöhe 1000 mm / Gesamt installierte Leistung 25 kW --- Kapazität: Blechbreite max. 1300 mm / Blechdicke 0,8 bis 6 mm (Baustahl) / Blechdicke 0,8 bis 4 mm (Edelstahl)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7967 TECHNICAL DATA - Maximum workpiece width: 1100 mm Bdsdpfxjza Elwo Ah Uec - Maximum workpiece height: 170 mm 2 units: 1) Serrated metal roller for calibration 2) Serrated rubber roller + pressure shoe + metal roller – Top side: - Rubber infeed roller - Unit (two units driven by one 15 kW motor) - Rubber transport roller - Rubber outfeed roller - Belt air blower – Bottom side: - 2 metal sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Sanding thickness potentiometer - Electric table height adjustment + manual fine adjustment - Pneumatic brake - 2 feed speeds - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (LxWxH): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian-made – 2 sanding units – Unpainted – Used sander, in excellent condition Net price: PLN 77,900 Net price: EUR 18,550 (based on 4.2 EUR exchange rate) (Prices may vary with significant fluctuations)

Koşul: ikinci el, Üretici: Kuderer Maschinenbau GmbH Model: AZ-2 Yıl: 1992 Bodey N Nw Repfx Ah Uedc Bant Zımpara Makinesi Toplam ölçüler: 1000 x 440 x 1080 mm Bant boyutu: 150 x 1440 mm Güç: 1,5 kW Toz Emme Ünitesi Toplam ölçüler: 560 x 560 x 690 mm

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 1998, Fonksiyonellik: tamamen fonksiyonel, taşlama genişliği: 1.100 mm, güç: 11 kW (14,96 bg), yükseklik ayar tipi: elektrikli, Overhauled automatic wide belt calibrating sander designed for calibration of solid wood and sanding of veneered panels. The SANDYA 10 model belongs to the higher range of SCM automatic wide belt sanders, known for its extremely rigid frame, top-class sanding quality, and versatile application. 2 working units: drum + drum with pad, both powered by a shared 11 kW motor 1. calibration drum: steel 2. sanding drum: soft rubber + pneumatic sanding pad Sanding width: 1100 mm 2 feed belt speeds Automatic thickness measurement Motorised thickness adjustment with digital display + fine tuning Infeed and outfeed table extensions Pneumatic oscillation Very good technical condition + fully refurbished Czech manual available CE safety standard compliant Suitable for calibration and sanding of both solid wood and veneer Bodpowx I Tpefx Ah Uodc EXCELLENT TECHNICAL CONDITION The machine has been overhauled, set up and tested.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packer model PPZA-1300/6 Technical data and year of manufacture: - Erlenbach ESA 5: Year 2013 - VIRO model PPZA-1300/6: Year 2011 - Condition: Used for less than one month (like new) - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm - Cutting speed: 1.5 m/min - Waste grinding system: top, bottom, sides Additional information: Bdjdpsv Hm A Tjfx Ah Ujc 1. Full oscillating cutting at all stations The machine is equipped with a wire oscillation system at each cutting stage: - Horizontal cutting: up to 61 oscillating wires - Vertical (side) cutting: up to 11 wires with oscillation system - Down-Cutter station (top-bottom cutting into bundles): also equipped with full wire oscillation 2. Automatic wire setting The automatic wire positioning system operates at key stations: - On horizontal cutting - At the Down-Cutter station (top-down cutting) 3. Automatic adaptation to block length (5m / 4m) The machine is factory-prepared to handle blocks with lengths of both 5 meters and 4 meters. Automatic actuator in the Down-Cutter station: After selecting the appropriate function in the menu (5 or 4-meter blocks), the machine automatically adjusts the clamp actuator and supporting barrier. This ensures that the side front waste during top-down cutting always falls precisely into the designated, proper location. No manual adjustments are required.

Koşul: ikinci el, Kündig Premium-1 1100 K Quality product from Switzerland CONSTANT TABLE MACHINE / automatic head adjustment Wide-belt calibrating and fine sanding machine Combination unit with grooved rubber contact roller in proven hardness Contact roller level steplessly adjustable according to grit scale Bsdpfx Ajy R Ruaeh Ujdc Pneumatic raising/lowering of the contact roller Pneumatic sanding pad with quick-change sliding layer and precision pressure regulator Parallel spring-loaded, ground steel pressure roller at infeed Rubber-coated pressure roller at outfeed Belt drive motor power 11 kW Working width 1100 mm Max. workpiece passage height 200 mm Feed speed steplessly adjustable from 3–15 m/min Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed release (for long workpieces) PLC control with touchscreen and teach-in memory for automation and management of all work programs Infeed and outfeed tables with roller support Machine is WORKSHOP TESTED in VERY GOOD CONDITION First delivered 2016 from training workshop / retirement Available from stock in Lieboch

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Yönlendirilebilir bant zımpara Nebes L125 - Yeni CE İtalya'da üretilmiştir Bant 1500 x 120 mm NEBES L125 bant zımpara teknik özellikleri Bant boyutu: 1500 x 120 mm Boşta devir sayısı: 1400 devir/dak Bant hızı: 15 m/sn Tabla boyutları: 410 x 185 mm Freze çapı ve diş sayısı: Ø 180 mm - Z 120 Bedey Takcepfx Ah Uedc Gürültü seviyesi: 70 dB Toz emiş çıkış sayısı: 1 Besleme: 400 V 50 Hz Motor gücü: 750 W Paket boyutları: 450 x 830 x 1050 h mm Net ağırlık: 65 kg

Koşul: ikinci el, Bütfering ECO 111 Electronic Wide-belt Calibration and Fine Sanding Machine Contact roller unit 85 SH Bsdpjy Rzf Aefx Ah Uedc CPS electronically controlled segmented sanding pad Working width 1100 mm Terminal for various work programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock in Lieboch

Koşul: mükemmel (kullanılmış), Stock number: 7549 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 170 mm 2 units: 1) Profiled rubber roller for calibration 2) Rubber roller + pad + metal roller – From above: Feed metal roller, slip type Unit Feed metal roller, slip type Unit with pad Discharge metal roller, slip type – From below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11 kW With pneumatic brake Working pressure: 6–8 bar Extraction nozzle diameter: 2 x 150 mm Overall dimensions (L/W/H): 1960 x 1700 x 2000 mm Weight approx.: 2000 kg – German made – 2 units – Not repainted – Used sander, in very good condition Net price: 34,900 PLN Bdjdpfoy T Irhox Ah Uoc Net price: 8,300 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger FX changes)

Koşul: ikinci el, Teknik detaylar: Mil sayısı: 1000 Çelikte delme kapasitesi (çap): 32 mm Delme stroku: 200 mm Devir aralığı: 63 - 1000 dev/dak Bjdpfjw Th Nlsx Ah Uedc Dökme demirde delme kapasitesi: 50 mm Matkap mili Morse konik: MK4 Mil çenesi: 315 mm Miller arası mesafe: 475 mm Matkap istasyonu sayısı: 3 Kafa ayarı: 280 mm İlerleme: 0,08 - 1,25 mm/devir (9 kademeli) Mil/masa mesafesi: 710 mm Tabla yüzeyi: 450 x 560 mm Toplam güç ihtiyacı: 12,4 kW Makine ağırlığı yaklaşık: 3,1 t Makine ölçüleri yaklaşık UxGxY: 2,15 x 1,40 x 2,65 m Sıralı matkap makinesinde önceki sahibi tarafından kutulu matkap mili çıkarılmıştır!

Koşul: ikinci el, Üretim yılı: 1998, Teknik detaylar: Çelikte delme kapasitesi (çap): 15 mm Delme stroku: 100 mm İplik kesme: M16 Delme istasyonu sayısı: 3 Matkap mili konikliği: 3x MK2 İş mili çıkıntısı: 220 mm İş mili mesafesi: 335 mm Fener mili ayarı: (dikey) 290 manuel mm İlerleme hızı:: manuel mm/dev İş mili hızı:: 220-1600 / 400-3200 / 800-6400 rpm İş mili/tabla mesafesi: min/maks: 235/525 mm Masa yüzeyi: 1270 x 315 mm Masa ayarı: sabit / sabit mm Toplam güç gereksinimi: bilinmiyor kW Makine ağırlığı yaklaşık: 0,72 t Makine boyutları yaklaşık UxGxY: 1,4 x 0,8 x 2,25 m soğutma suyu sistemi dahil El ve ayak kumandası ile çalıştırma Bdedpsu Idutofx Ah Usc Delme milleri aşağıdaki gibi donatılmıştır: 1x matkap aynası 13mm 2x hızlı hareket mandreni 10mm *

Koşul: ikinci el, Teknik detaylar: Tel çapı - maks.: 9,0 mm Tel çapı - min.: 2,0 mm Çalışma voltajı: 380 V / 50 Hz V Kontrol voltajı: 220 V Toplam güç gereksinimi: 18 kW Bodpfx Aevc Akljh Uedc Makine ağırlığı yaklaşık: 5,0 t Boyutlar: Yağlama sistemi: 830 x 650 x 1000 mm Makine boyutları yaklaşık UxGxY: 3,3 x 1,5 x 1,45 m Kontrol kabini boyutları UxGxY: 0,7 x 1,5 x 1,75 m TEL DOĞRULTMA VE KESME MAKİNESİ / MAKİNE 2000 YILINDA YENİ KONTROLLE GELİŞTİRİLDİ Sağ ve sol el çekme ve basma yayları ile burulma yaylarının üretimine yönelik, programlanabilir, elektronik-hidrolik kontrollü üniversal yay sarma makinesi. Yaylar istenilen eğim ve gövde şekline göre imal edilebilmektedir. Çıkış max. 90 adet/dk. Yay dış Ø 10 - 120 mm Tel besleme uzunluğu sınırsız, hız = 27 - 80 m/dak. Sarma tertibatı: iki parmak sistemi tel kalınlığı Ø 2.0 - 9.0mm; Yay dış Ø 10 - 120 mm Tek parmak sistemi: tel kalınlığı Ø 3,0 - 7,0 mm; Yay dış Ø maks. Ø 60 mm Teçhizat: 5x besleme silindiri, tel tutucu 3 mm iki parmak Yay uzunluğu ölçüm cihazı LION PRECISION-PANTHER Tel makarası tutucu POST, motor tahrikli, mandrel tutucu Ø 1.400 mm Yağlama sistemi Kontrol kabini soğutucusu RITA hidrolik ünite Birçok opsiyonel aksesuar ve/veya yedek parça! İD. *

Koşul: ikinci el, Teknik detaylar: Çelikte delme kapasitesi (çap): 30 mm Delme stroku: 180 mm Matkap mili konikliği: 4 x MK 3 İş mili çıkıntısı: 310 mm İş mili mesafesi: 490 mm Delme istasyonu sayısı: 4 Bdedpou Idu Hsfx Ah Uoc Fener mili ayarı: 300 (manuel) mm İlerleme hızı:: 0,08 - 0,64 / 6 adım mm/dev İş mili hızı:: 50 - 1.215 / 19 adım rpm İş mili/tabla mesafesi: maks./min.: 500/200 mm Masa yüzeyi: 1820 x 395 mm Masa ayarı: Yükseklik: 300 (manuel) mm Toplam güç gereksinimi: 4x 1,5 (6,0 kW) kW Makine ağırlığı yaklaşık: 2,8 ton Makine boyutları yaklaşık UxGxY: 2,1 x 1,1 x 2,75 m Diğer teknik veriler: -Delme milinin merkez mesafesi 490 mm -Otomatik değiştirme ile 3 ve 4 numaralı delme kolonlarında diş kesme -Tüm delme milleri saat yönünde ve saat yönünün tersine dönerek çalışır -iş mili karşı mili ve varyatör -soğutma sistemi ile *

Koşul: ikinci el, Teknik detaylar: Mil sayısı: 4 Çelikte delme kapasitesi (çap): 2-16 mm Delme stroku: 140 mm Matkap mili konikliği: MK 3 İş mili çıkıntısı: 280 mm İş mili mesafesi: 455 mm Fener mili ayarı: 250 el ile - krank mm İlerleme hızı:: 0,08 - 0,12 - 0,20 - 0,31 / 4 adım mm/dev Besleme hızı:: otomatik + manuel İş mili hızı:: 180 - 2000 / 8 adım rpm İş mili/tabla mesafesi: min. 3x 140mm ve 1x 260mm mm İş mili/tabla mesafesi: maks. 3x 700mm ve 1x 820mm mm Masa yüzeyi: 1800 x 350 mm Masa ayarı: 300 el mm üzerinden Toplam güç gereksinimi: 6,3 kW Makine ağırlığı yaklaşık: 2,4 ton Makine boyutları yaklaşık UxGxY: 2,1 x 0,9 x 2,2 m Uygulama: Delme, havşa açma, raybalama ve diş açma. Her delme milinin kendi tahrik motoru vardır Ekipman: Ayak pedalı/operasyon Bdsdpfju Idugex Ah Usc El krankı *