Kullanılmış Fliegl 3-Achs Containerchassis Vario V3 satın al (79.022)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Triptis
2.248 km
Konteyner şasi dorse
FLIEGL3-Achs Containerchassis Vario V3
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802032235, boş ağırlık: 4.983 kg, azami yük ağırlığı: 33.017 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, bir sonraki muayene (TÜV): 12/2025, süspansiyon: hava, lastik boyutu: 385/55 R22.5", renk: açık yeşil, Üretim yılı: 2022, Chassis semitrailer for containers
Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions
Container mounts:
- Rear extension retracted: 1 x 20-foot or 1 x 30-foot flush with rear
- Locking positions: new design for improved fifth-wheel load with 20’ containers
- Rear lighting recessed and protected within the rear section
- Mid-telescopic, 1st stage, rear extension extended to 1st stage: 2 x 20-foot or 1 x 40-foot without gooseneck tunnel
- Mid-telescopic, 1st stage, rear extension extended, 1 x 40-foot with gooseneck tunnel
- Mid-telescopic, 2nd stage, rear extension extended to 2nd stage: 1 x 45-foot with gooseneck tunnel and rear overhang
- Mid-telescopic, 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45-foot with extra-long gooseneck tunnel and bevelled corners, central tube frame as telescoping system with bolt locking
Transport of loaded tank containers excluded.
With adjustable rear height in “hot-dip galvanized version” and foldable central container supports for containers without tunnel
Removable front container guides
Front cross member with latest Vario V3+ New Generation locking system
Front extension mounted on rollers, manually extendible (for 45-foot containers with long tunnel)
Rear extension mounted on rollers, with manual hand crank
24 t, 2-speed landing gear, single-sided operation, with straight lower section, without load compensation
2 wheel chocks with holders
Aluminium side underrun protection
Galvanized steel rear underrun protection
Extendable rear underrun protection for 45-foot containers
Full-width rear mud flap (not in combination with forklift holder)
Half-shell fenders
With EC-compliant anti-spray mud flaps
Rear impact protection
Spare wheel holder for 1 E-wheel, with fastening kit
1 toolbox for fire extinguisher up to 6 kg
Ksdpfxjww Iczs Aagedk
1 fire extinguisher (ABC powder, 6 kg)
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSDS 380 Vario V3
Ara
Durumu: yeni, makine/araç numarası: d73a4869e108da5fdd6e55526, boş ağırlık: 4 kg, azami yük ağırlığı: 33 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further Information
Chassis Semi-Trailer Container
Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions
Container Mountings:
Rear extension retracted:
1 x 20 ft or 1 x 30 ft flush with the rear
Center telescope 1st stage, rear extension extended 1st stage:
2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel
Center telescope 2nd stage, rear extension extended 2nd stage:
1 x 45 ft with gooseneck tunnel, overhanging at the rear
Center telescope 2nd stage, front extension extended 1st stage,
rear extension extended 2nd stage:
1 x 45 ft with long gooseneck tunnel and chamfered corners
Center telescope as interlocking central tube frame with bolt lock
without rear height adjustment and without foldable intermediate supports, no transport of containers without tunnel possible.
2 container guides, incl. mounting plate for electrics, air and brake connections (connections mounted upwards)
Plug adapter for front locking, to secure containers without tunnel from below, with bracket for non-use
Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel)
Rear extension mounted on rollers, with hand crank
24 t, two-speed landing gear, single-sided operation, with straight base, without push compensation
2 wheel chocks with holders
Side underrun protection aluminium
Rear underrun protection galvanized steel
Rear underrun protection extendable for 45 ft container
Half-shell mudguards with anti-spray splash flaps according to EU regulations
Rear bumper protection
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Axle spacing offset mm (combined transport) up to 44 t gross train weight
Air suspension
1st axle automatic lift axle, including forced lowering and traction assistance, operation by braking 3 times (traction assistance functional up to 30% axle overload and max. speed of 25 km/h)
Brake System
2-line compressed air brake system, color-coded piping for easy service
Spring-loaded parking brake
Tele Control
Axle relief for easy telescoping
2 foolproof coupling heads front, without connecting line
EBS, electronic braking system with EBS socket front, without connecting cable
Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!
With raise & lower valve
Kedpfx Aji Ri E Aeagjdk
Vehicle stability control system
Axle load detection via EBS CAN bus signal for display in the driver’s cab, truck must be suitably prepared, no truck installation (not a calibrated scale)
Wheels and Tires
385/55 R22.5, brand at manufacturer’s discretion
Steel rims, factory silver
Electrics
24 Volt, 4 x 3 chamber tail lights + 1 round reversing light + 1 round rear fog light, side yellow LED lighting
2 white position lights front
2 white/red lane marker lights rear
2 x 7-pin foolproof sockets front, no connecting cable
Operating Instructions
When transporting 45 ft containers with short tunnel, with or without front extension, the permissible system length from kingpin to rear edge and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! An exemption permit according to § 70 StVZO is required!
Registration / Plates
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for single-line license plate holder
Warning sign according to ECE - 70
Conspicuity marking
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
FlieglDTS 300 3 Achs Tiefladeranhänger
Ara
Durumu: kullanılmış, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm.
Kdjdpsy Di Uljfx Aagek
Vehicle is being offered on behalf of a bank.
-- Subject to typographical errors, mistakes, and modifications. Sample images --
More data at: !
More details: !

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Schwebheim
2.317 km
Açık yarı römork
FlieglSDS350 3 Achs Sattelauflieger
Ara
Durumu: kullanılmış, boş ağırlık: 7.375 kg, azami yük ağırlığı: 27.625 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2012, yükleme alanı uzunluğu: 13.650 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5 160J, arka lastik boyutu: 385/65R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Stake pockets, -- typographical errors, mistakes, and changes reserved, sample images --, More data at: !, More details: !
Kdedpsyy Uvtjfx Aagjk
Küçük ilan
Lichtenfels
2.271 km
Kutu dorse
FLIEGL3-Achs Chassis 40 FT mit Container HC, Side Open
Ara
Durumu: kullanılmış, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container
Kdsdjvzk Naepfx Aagsk
First registration: 2023
Permissible total weight (technical): 38,000 kg
Chassis tare weight: 3,640 kg
High-Cube container tare weight: 5,800 kg
SAF axles with large disc brakes, 430 mm
1st axle is a LIFT AXLE with traction aid
Equipped with vehicle driving stability system
Axle load detection
6x 385/55 R 22.5 tyres
40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm
Rear portal doors
Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm
Volume: 68 cbm
Fits 25 Euro pallets
Accessible with pallet truck and forklift
Condition: A1
RENTING is the new BUYING – also available from us as full-service rental.
Küçük ilan
Essen
2.594 km
Yürüyen tabanlı yarı römork
FLIEGL3-Achs-Schubbodenauflieger 92 m³
Ara
Durumu: kullanılmış, azami yük ağırlığı: 31.410 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2020, Donanım: ABS, Acil ve kısa sürede teslim edilebilen tüm araç stoklarımızı web sitemizde bulabilirsiniz.
Donanımdan bir alıntı. Tam donanım listesi talep üzerine sunulur.
- 3 x SAF aks
- Disk frenler
- 1. aks otomatik kaldırma aksı
- Havalı süspansiyon
- 24 t, 2 kademeli destek ayağı, tek taraflı kumanda
- Arkada uzatılabilir merdiven
- Plastik alet kutusu, çekmeceli ve raflı
- 2 hatlı basınçlı hava fren sistemi, EBS/ABS
Ksdpjw Tpr Uefx Aagodk
- Lastikler 385/55 R22.5
- Kayar taban Cargo Floor, yaklaşık 10 mm taban profili
- Alüminyum boş profillerden arka kapak, çift kanatlı kapı
- LED çalışma farları
- Şasi rengi DB 7350 Novagrau
- Kasa rengi RAL 7035 açık gri
- Rulo brandası RAL 3002 karmen kırmızıya yakın
Küçük ilan
Triptis
2.248 km
Açık kasa ve brandalı treyler
Fliegl3-Achs Gardinensattel Standard Xtra-Long
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027997, boş ağırlık: 6.832 kg, azami yük ağırlığı: 28.168 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archival photos; the vehicle may still be in use.
Equipment details available on request.
Kdsdpfx Aswk Dg Noagsk
Küçük ilan
Triptis
2.248 km
Açık kasa ve brandalı treyler
FLIEGL3-Achs Gardinensattel Standard
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902024321, boş ağırlık: 5.765 kg, azami yük ağırlığı: 29.235 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archive photos; the vehicle may still be in use!
Kdedpfx Aowk Dk Isagok
Specifications available upon request!
Küçük ilan
Korschenbroich-Glehn
2.606 km
Açık yarı römork
FLIEGL3-Achs Gardinen Sattelauflieger
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation.
Chassis
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin
Outer frame slightly tapered with 'Load-Lock profile' for attaching tie-down straps
24 t 2-speed landing gear, single-sided operation
Aluminum side underrun protection
Galvanized steel rear underrun guard
Quarter shell mudguards in front of and behind the axle assembly
With anti-spray mud flaps according to EU regulations
Rear impact protection
Spare wheel holder for 1 spare wheel, with wheel fastener kit
Kdodjri Hihjpfx Aagek
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
"Axle/chassis laser alignment" reduces tire wear and fuel consumption
1st axle with automatic lift, additionally electronically controllable from the truck cab
Includes forced lowering and start aid, no truck installation required
Brake System
2-line compressed air brake system
Spring-loaded parking brake
Wabco EBS electronic braking system with EBS socket at the front, without connection cable
With lift & lower valve plus auto-reset function
Vehicle stability control system
Axle load detection via EBS can-bus signal, output to display
Wheels and Tires
385/65 R22.5" / 6 steel rims, factory silver
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white LED position lights at the front
2 white/red track marker lights at the rear
2 x 7-pin and 1 x 15-pin interchangeable-proof sockets at the front, no connection cable
2 additional LED work lights at the rear, switched via reverse gear
Floor
Approx. 30 mm phenolic plywood floor, on longitudinal cross-members for high point load resistance, suitable for forklift axle loads up to 7100 kg at the front wall
Stakes
5 rows of aluminum V-stakes
2 pairs of Vario steel stakes, in combination with Vario beams for forward and backward load securing; the aluminum stakes are omitted in the area of the steel stakes
Rear portal doors, double-leaf with 2 internal rod locks each
Tarpaulin with welded horizontal and vertical straps
Unladen weight: 5,960 kg
Offer and images non-binding
Küçük ilan
Bovenden
2.411 km
Değişebilir kasalı yarı römork
DollU-74.0 3-Achs Containerchassis, 2x20/20/30/40ft,
Ara
Durumu: kullanılmış, boş ağırlık: 6.950 kg, azami yük ağırlığı: 30.050 kg, toplam ağırlık: 37.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/1998, süspansiyon: hava, lastik boyutu: 385/65R22.5, renk: yeşil, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 3 aks, BPW akslar, havalı süspansiyon, 1. aks kaldırılabilir, son aks takipli yönlendirmeli, ABS (antiblokaj sistemi), konteyner kilidi, yan koruma, destek ayakları, alet sandığı
Üst yapı: 20/2x20/30 ve 40 ft konteynerler için değiştirilebilir taşıyıcı dorse, 3x BPW aks, kampanalı frenler!
1. aks kaldırılabilir, 3. aks takipli yönlendirmeli!
Kodox Emldepfx Aagodk
Stepne ek ücret karşılığında mevcuttur! AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve hata hakkı saklıdır!
Küçük ilan
Essen
2.594 km
Değişebilir kasalı yarı römork
WIELTON3-Achs-Containerchassis - multifunktional
Ara
Durumu: kullanılmış, azami yük ağırlığı: 35.840 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 02/2026, Donanım: ABS, Extract from the equipment list. Complete specification available on request.
Chassis
- Configuration for the transport of containers: 45', 40' HC, 30', 20' center, 20' rear, 2x20', 40' ISO
- Frame adaptation for a 40' ISO container
- Rear pneumatic extension with an additional mechanical locking pin
- Container Master 45' R2
- Extendable bumper
- Steel underrun protection
Axles and Suspension
- SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC KNORR clamps
- Brake disc diameter 430 mm
- Rigid axles
- Approx. 1,090 mm fifth wheel height unladen
- 1 lift axle
Landing Legs
- JOST two-speed landing gear
Tyres/Rims
- BRIDGESTONE 385/55 R22.5 DURAVIS R002 3PMSF (B-B-70)
- 6 pcs, Rolling resistance: B, Wet grip: B, Rolling noise: 70 dB
- Without spare tyre
- 6 steel rims, 22.5-11.75 ET-120
- Wheel nut protection caps, no spare rim
Braking system/Pneumatics
- Steel air tanks
- Braking system as per manufacturer's choice with Basic Modulator with RSS/RSP
Electrics
- Socket: 1x 15-pin and 2x 7-pin with EBS connection, without connecting cables to the tractor unit
Lighting
- Partial LED Aspöck-EUROPOINT III
- LED license plate lighting
- LED outline marker lamps
- LED side marker lamps
Other Chassis Equipment
- Full-size mudguards with splash guard behind the third axle
- Full PVC mudguards
- Without spare wheel carrier and winch
Kdjdjw Ak A Uopfx Aagek
- Key for container locking
- Frame adaptation for transport of ISO 40' containers (flat floor without tunnel)
- 2 adapters and 2 spacer supports
- No toolbox
Chassis Painting
- KTL coating
- Chassis painted RAL 7021 (black grey)
Küçük ilan
Bottrop
2.595 km
Açık yarı römork
FLIEGLSattelpritsche mit Bordwänden und 3 Achsen
Ara
Durumu: kullanılmış, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse
Yararlı yük: 28.410 kg
Tip: SDS350
Fren: Disk fren
Aks: BPW
Ksdpowgghnsfx Aagjdk
+ Havalı süspansiyon
2x destek ayağı (JOST)
Uzunluk: 13,60 m
Genişlik: 2,40 m
Yükseklik: 0,70 m
Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz.
Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSDS 380 Vario V1
Ara
Durumu: yeni, makine/araç numarası: cf997e3303ed59631e2030c1b, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22,5, Further Information
Chassis Semi-Trailer for Container
Fine-grain steel welded construction, fifth wheel plate with replaceable 2 kingpins and 2 kingpin positions
Container mounts:
Rear extension retracted:
1 x 20 ft or 1 x 30 ft flush at rear
Central telescopic frame 1st stage, rear extension extended 1st stage:
2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel
Central telescopic frame 2nd stage, rear extension extended 2nd stage:
1 x 45 ft with and without gooseneck tunnel, with overhang at the rear.
Central telescopic frame as interlocking central tube frame with locking bolts
with adjustable rear height and folding center supports for containers without tunnel
Container guides at the front, plug-in and removable (electrics, air, and brake connections at the front cross member)
Plug-in adapter for front locking device to secure containers without tunnel from below, with holder for storage when not in use
Rear extension mounted on rollers, with manual crank
24 t, 2-speed landing gear, single-sided operation, with semi-rounded base and straight mounting plate, with thrust compensation
2 wheel chocks with holder
Side underrun protection, aluminum
Rear underrun protection, galvanized steel
Retractable underrun protection for 45 ft container
Half-shell mudguards
With anti-spray mud flaps according to EC
Rear impact protection
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Axles/chassis laser-aligned for reduced tire wear and fuel consumption
Axle spacing offset mm (intermodal traffic) up to 44 t gross train weight
Air suspension
Brake system
2-line air pressure braking system
Colored line layout for easy service
Spring-actuated parking brake
Tele Control
Axle lift for simple telescoping
2 foolproof coupling heads at the front, without connecting lines
EBS, Electronic Braking System with EBS socket at the front, without connecting cable
Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!
With lift & lower valve
Vehicle driving stability system
Axle load detection via EBS CAN-bus signal, for display on cab monitor, truck must be appropriately pre-configured, no on-board truck installation (not a calibrated scale)
Wheels and Tyres
385/55 R22.5, make at manufacturer’s discretion
Steel rims, factory silver
Electrics
24 volt, multi-chamber lights, tail and brake lights in LED, side yellow LED lighting (Note! On certain towing vehicles, false diagnostics may occur even if function is intact)
2 white position lights at front
Kdodpfx Aasi Ri Exjgsk
2 white/red lane marker lights at rear
2 x 7-pin foolproof sockets at the front, without connecting cable
Operating Instructions
Attention: Carriage of filled tank containers is excluded!
When transporting a 45 ft container with short tunnel, with or without front extension, the permissible system length from kingpin to rear edge of vehicle and total train length of 16,500 mm is exceeded! The underrun protection must be extended manually! A special permit in accordance with § 70 StVZO is required!
Country of Registration / Signs
Germany
Type approval in accordance with EC 2007/46
24/7 service hotline
Prepared for single-line license plate holder
Warning panel according to ECE - 70
Contour marking with reflective strips according to ECE R 048, white on sides, red at rear
Paintwork
Front section of chassis + rear extension hot-dip galvanized
Rear area DB 7350 Nova Grey
10 years warranty against rust-through
Landing legs black coated
ATTENTION: Archive imag
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSDS 380 Vario Kipp 20/30
Ara
Durumu: yeni, makine/araç numarası: a203d9a559ff6484cf2a14c1f, boş ağırlık: 4 kg, azami yük ağırlığı: 33 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information
Chassis Semi-Trailer Container
Fine-grain steel welded construction, fifth-wheel plate with replaceable kingpin and two kingpin positions
Front locking on tipping-cylinder support cradle with guide wedges on both sides, rear locking on continuous pivot shaft with return spring
Without subframe for self-supporting containers
Container mountings:
Locking crossbeams, double position for securing either 1 x 20-foot or 1 x 30-foot container.
(Note: Low fifth-wheel load when using 20-foot containers)
Adjustment via central telescopic tube frame with interlocking design and pin locking.
24-ton, 2-speed landing gear, single-sided operation, straight lower section, without load balance
Clear support foot dimensions or free rear swing radius approx. 1850 mm
2 wheel chocks with holder
Half-shell mudguards
With anti-spray flaps according to EC specifications
Hydraulics
Low-pressure cylinder, max. 170 bar, smallest section hard-chrome plated, with HDK screw coupling, fixed part, NW 48 mm.
(No hose connection included)
Hydraulic operation via truck PTO (power take-off)
Hydraulic connection with hose and HDK screw plug, NW = 48 mm with knurled nut
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
Axle spacing offset mm (combined transport) up to 44t gross train weight
Air suspension
Brake system
2-line compressed air brake system
Colour-coded pipe routing for easy maintenance
Spring-loaded parking brake
Tele Control
Axle lift for easy telescoping
2 fool-proof coupling heads at the front, without connecting line
EBS, Electronic Braking System with EBS socket at the front, without connecting cable
Note: This trailer may only be towed by tractors that guarantee ABS functionality!
With raise/lower valve
Vehicle stability control system
Axle load detection via EBS CAN bus signal, for display in the driver’s cab (truck must be appropriately pre-equipped, no truck installation included, not a calibrated scale)
Wheels and tyres
385/65 R22.5, manufacturer of choice
Steel rims, factory silver included
Electrics
24 volts, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin fool-proof sockets at the front, without connecting cable
Additional LED worklight at the rear, switched via reverse light
Country of registration / plates
Germany
EU type approval 2007/46
24/7 service hotline
Prepared for single-line number plate holder
Kdjdpji Ri Avefx Aagok
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Paintwork
Frame finished in DB 7350 Nova Grey
10-year corrosion perforation warranty
Support legs coated in black
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSDS 380 Vario V2+ mit Frontausschub
Ara
Durumu: yeni, makine/araç numarası: 7dbf076fea9ec110acb399f8f, boş ağırlık: 5 kg, azami yük ağırlığı: 32 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further information
Chassis: semi-trailer container
Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions
Container mounts:
Rear extension retracted:
1 x 20 ft or 1 x 30 ft flush with rear
Center telescope 1st stage, rear extension extended to 1st stage:
2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel
Center telescope 2nd stage, rear extension extended to 2nd stage:
1 x 45 ft with gooseneck tunnel, with rear overhang
Center telescope 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage:
1 x 45 ft with long gooseneck tunnel and chamfered corners
Center telescope as overlapping central tube frame with locking pin,
with adjustable rear height and folding center supports for containers without tunnel
Plug-in and removable front container guides (electrics, air, and brake connectors located at the front crossmember)
Plug adapter for front lock, for securing containers without tunnel from underneath, with holder for when not in use
Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel)
Rear extension mounted on rollers, operated by hand crank
24 t 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation
2 wheel chocks with holders
Kodsi Ri R Sepfx Aagjdk
Side underrun protection, aluminium
Rear underrun protection, galvanized steel
Extendable rear underrun protection for 45 ft containers
Half-shell mudguards with EU-compliant anti-spray flaps
Rear impact guard
Axles & Suspension
SAF disk brake axles with 430 mm disc diameter
Axles/chassis laser-measured to reduce tire wear and fuel consumption
Offset axle spacing mm (combined transport) up to 44t gross train weight
Air suspension
1st axle automatic lift axle, including forced lowering and start assist, activation by 3x braking (start assist operative up to 30% axle overload and up to a speed of max. 25 km/h)
Braking system
2-line compressed air brake system, color-coded routing for easy service.
Spring-loaded parking brake
Tele Control
Axle relief for easy telescoping
2 non-interchangeable coupling heads at front, without connection line
EBS, Electronic Braking System with EBS socket at the front, no connection cable
Note: The trailer may only be towed by tractors that ensure the ABS functionality!
With raise and lower valve
Vehicle stability control system
Axle load detection via EBS CAN bus signal, display in driver's cab, truck must be appropriately pre-equipped, no truck installation (not legal-for-trade scale)
Wheels and Tires
385/55 R22.5, brand at manufacturer's discretion
Steel rims, factory silver
Electrics
24 volts, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note: With certain tractors, error messages may appear even if all functions operate properly.)
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable sockets at front, without connection cable
Operating instructions
When transporting 45 ft container with short tunnel, with or without front extension, the permitted system length from kingpin to end of vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required!
Registration country / plates
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for license plates
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSDS 380 Vario Kipp 30/40
Ara
Durumu: yeni, makine/araç numarası: 7272fc3b6a97f9be58a222f05, boş ağırlık: 5 kg, azami yük ağırlığı: 32 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information
Chassis Semi-Trailer Container
Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions.
Front locking on tipping cylinder mounting bracket with
inclusion of guidance wedges on both sides, rear locking on continuous torque shaft with return spring.
Without subframe for self-supporting containers.
Container Mountings:
Locking cross-member, adjustable for locking either 1 x 30 ft or 1 x 40 ft container.
Adjustment via central telescopic frame consisting of nested central tubes with bolt locking. Optimized fifth-wheel load when transporting both 30 ft and 40 ft containers.
24 t two-speed landing gear, single-sided operation, with straight base, without displacement equalizer.
2 wheel chocks with holders.
Aluminum side underrun protection.
Galvanized steel rear underrun protection.
Half-shell mudguards with anti-spray flaps according to EC regulations.
Hydraulics
100 low-pressure cylinder, max. 150 bar, with HDK threaded coupling, fixed part, NW 48 mm. (without hose connection).
Kedpfx Asi Riv Ejagsdk
Operation hydraulically via truck PTO, incl.
Hydraulic connection with hose and HDK threaded plug NW = 48 mm with knurled nut.
Axles & Suspension
SAF disc brake axles with 430 mm diameter discs.
Axles/chassis laser-aligned to reduce tire wear and fuel consumption.
Axle spacing offset mm (for intermodal transport) up to 44 t gross train weight.
Air suspension.
Brake System
170 two-line compressed air brake system.
Color-coded cable routing for easy service.
Spring-actuated parking brake.
Tele Control
Axle lift for easy telescoping.
2 non-interchangeable coupling heads at the front, without connecting line.
EBS, Electronic Braking System with EBS socket at the front, without connecting cable.
Note: The trailer may only be towed by vehicles that ensure the full function of the ABS!
With lift/lower valve.
Vehicle Stability Control System.
Axle load detection via EBS CAN bus signal for display in the cab; truck must be appropriately prepared, no truck installation/no certified axle load scale included.
Wheels and Tyres
385/65 R22.5 make at the manufacturer’s discretion.
Steel rims, factory silver.
Electrics
24 V, multi-chamber lights, side yellow LED lighting.
2 white position lights at the front.
2 white/red lane marker lights at the rear.
2 x 7-pin non-interchangeable sockets at the front, without connecting cable.
2 additional LED work lights at the rear, switched via reverse light.
Küçük ilan
München
2.162 km
Işleme merkezi
Deckel Maho50 V 3 Achs CNC Fräsmaschine
Ara
Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 500 mm, Y ekseni hareket mesafesi: 380 mm, Z ekseni hareket mesafesi: 380 mm, toplam yükseklik: 2.380 mm, toplam uzunluk: 1.450 mm, toplam genişlik: 17.600 mm, toplam ağırlık: 3.500 kg, masa uzunluğu: 800 mm, masa genişliği: 480 mm, maksimum mil hızı: 8.000 dev/dak, mil hızı (dk.): 20 dev/dak, DMU marka ve tip 50 V freze merkezi satılıktır
Yakın zamanda yeni bir mil takılmıştır.
Makine çok iyi durumda ve tamamen çalışır durumda, 100el aralığında işleme sorunsuz bir şekilde mümkün
Teknik veriler:
Marka GRUNDIG
Model MillPlus
İş mili hız aralığı: 20 - 8000
Eksen sayısı: 3
X ekseni hareketi: 500 mm
Y ekseni hareketi: 380 mm
Z ekseni hareketi: 380 mm
Masanın dış uzunluğu: 800 mm
Masanın dış genişliği: 480 mm
Mil tutucu: SK40
Boyutlar L*W*H: 2450*1760+2380 mm
Ağırlık: 3500 kg
Talep üzerine, ek ücret karşılığında yükleme ve nakliye (Avrupa çapında) organize edilebilir.
Fiyatlar artı KDV
Randevu ile görüntüleme mümkündür. Bize ulaşın, ekibimiz size yardımcı olmaktan mutluluk duyacaktır.
Kdsdpjrdf Ebefx Aagjk
Takas veya değişim mümkün!
Makine alım / satımı
ÜRETIM VE METAL IŞLEME MAKINELERI ALIM / SATIMI VE ÇOK DAHA FAZLASI.
Üretiminiz için yüksek kaliteli ama ucuz bir metal işleme makinesine mi ihtiyacınız var? Ya da sizinkini satmak mı istiyorsunuz?
Daha fazla bilgi veya iletişim detayları için lütfen web sitemizi ziyaret edin
Küçük ilan
Schlierbach
2.315 km
Konteyner taşımacılığı
NooteboomCT-53-04 D 4-Achs Containerchassis Combitrailer...
Ara
Durumu: kullanılmış, ilk tescil: 10/2001, Üretim yılı: 2001, Nooteboom 4 dingilli konteyner şasisi 2 parçaya bölünebilir
Kdjdpfowmpa Hex Aagek
- 1. Eleman: 1 dingil
- 11.000 kg azami yüklü ağırlık
- 2. Eleman: 3 dingil
- 26.000 kg azami yüklü ağırlık
- ABS
- Havali süspansiyon
- 4 x BPW Eco Plus dingil
- 1. dingil kaldırılabilir
- Yükseltme / alçaltma sistemi
- Ön ve arka tarafta 2'şer destek ayağı
- Lastikler: 385/55 R 22.5
- Alman yarı römork
- TÜV / Muayene / Güvenlik Kontrolü: İsteğe bağlı ve ek ücret karşılığında yeni!
Hatalar ve ara satış hakkı saklıdır!
Küçük ilan
Hergensweiler
2.264 km
Kaynak döner tablası, Döner tabla, Pozisyoner
Protec Oerlikon 3 AchsKT 2000 HV
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, yük kapasitesi: 2.000 kg, Donanım: ayaklı uzaktan kumanda, 3-axis welding positioner, 2-ton load capacity, in good condition. Includes hand-held remote control (foot pedal available upon request). Tilt angle and rotation speed are infinitely adjustable from 0.05 to 1.0 rpm. Clamping plate diameter: 1.0 meter. Height when tilted to center (min.): approx. 0.7 m; horizontal: 0.9 m. Height when tilted to center (max.): 1.6 m; horizontal: 1.8 m. Length: 2.2 m; width: 1.35 m.
Kjdpfx Ajyupgzsagedk
Küçük ilan
Hergensweiler
2.264 km
Kaynak döner tablası, Döner tabla, Pozisyoner
Protec Oerlicon 3 AchsDT 2000
Ara
Durumu: iyi (kullanılmış), yük kapasitesi: 2.000 kg, 3-axis welding positioner, 2-ton load capacity, in good condition. Includes hand-held remote control (foot pedal available upon request). Tilt angle and rotation speed are infinitely adjustable from 0.05 to 1.0 rpm. Clamping plate diameter: 1.0 meter. Height when tilted to center (min.): approx. 0.7 m; horizontal: 0.9 m. Height when tilted to center (max.): 1.6 m; horizontal: 1.8 m. Length: 2.2 m; width: 1.35 m.
Ksdpfx Aoxxvaboagsdk
Küçük ilan
Hergensweiler
2.264 km
Kaynak döner tablası, Döner tabla, Pozisyoner
ESAB Pema 3 AchsTAP 1, 1000 Kg
Ara
Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, yük kapasitesi: 1.000 kg, 3-axis welding positioner with hydraulic height adjustment, load capacity 1000 kg, remote control
Table diameter 900 mm, excellent condition
Speed, height, and tilt continuously adjustable
Height with vertical table (min.): 635 mm
Height with horizontal table (min.): 800 mm
Height with vertical table (max.): 1360 mm
Kdodpfx Aeylihysagjk
Height with horizontal table (max.): 1500 mm
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Hergensweiler
2.264 km
Kaynak döner tablası, Pozisyoner, Döner tabla
Protec 3 Achs 10 ToKT 10 000 HV
Ara
Durumu: yeni, Üretim yılı: 2025, yük kapasitesi: 10.000 kg, dönme aralığı: 135 °, Donanım: ayaklı uzaktan kumanda, 3 Eksenli Kaynak Pozisyoneri Protec KT 10 000 HV
Kdjdpfxoxt Tgns Aagsk
Tam set: El ve çift ayak uzaktan kumandası dahil
Hız için dijital gösterge
Hidrolik yükseklik ayarı
Eğim aralığı 0° ila 130°
Ölçüler:
Eğimli yükseklik min: 1050 mm
eğimli yükseklik maks: 2200 mm
Yatay yükseklik min: 1360 mm
Tabla çapı: 2000 mm
Uzunluk: 3250 mm, Genişlik: 1700 mm
Dönüş hızı: 0,05 ila yaklaşık 0,6 dev/dak. (0,05 ila 1,2 dev/dak. mümkün)
Küçük ilan
Hergensweiler
2.264 km
Kaynak masası
Protec 3 Achs Hub DrehtischKT 1000 HV mit Lochtisch
Ara
Durumu: yeni, yük kapasitesi: 1.000 kg, Donanım: ayaklı uzaktan kumanda, 1000 kg taşıma kapasiteli komple set, el ve çift ayak uzaktan kumandası dahil (600 kg'dan 10.000 kg'a kadar mevcut)
3 akslı, yüksekliği ayarlanabilir kaynak dönüş masası
200 mm geçiş delikli
tablada 900 mm çapında T-yuvalı alternatif olarak 2000 x 1000 x 200 mm ebatlarında, 20 mm kalınlıkta, 100 mm delik ızgaralı, 28 mm çapında delikli masif plaka
Yatay pozisyonda yükseklik min. 0,65 m, max. 1,25 m
eğimli pozisyonda yükseklik min. 0,45 m, max. 0,95 m
Devir hızı 0,01 - 1,1 d/dk
135°'ye kadar eğim
Kdsdpjx Th A Hefx Aagjk
hız göstergeli el ve çift ayak uzaktan kumandası
son derece sağlam yapıda
Fiyat aksesuarsızdır, aksesuarlar çok uygun fiyat farkı ile alınabilir
Tablalı plaka ilave ücreti: 1.900 € (sadece pozisyoner ile birlikte alınabilir)
Küçük ilan
Hergensweiler
2.264 km
Kaynak döner tablası, Döner tabla, Pozisyoner
Protec 3 Achs Positionierer 10 ToKT 10000 HV
Ara
Durumu: yeni, Üretim yılı: 2025, yük kapasitesi: 10.000 kg, Donanım: ayaklı uzaktan kumanda, 3 Eksenli Kaynak Pozisyoneri Protec KT 10 000 HV
Tam set: El ve çift ayak uzaktan kumandası dahil
Hız için dijital gösterge
Hidrolik yükseklik ayarı
Eğim aralığı 0° ila 130°
Ölçüler:
Eğimli yükseklik min: 1050 mm
eğimli yükseklik maks: 2200 mm
Yatay yükseklik min: 1360 mm
Kodpox Th Suofx Aagodk
Tabla çapı: 2000 mm
Uzunluk: 3250 mm, Genişlik: 1700 mm
Dönüş hızı: 0,05 ila yaklaşık 0,6 dev/dak. (0,05 ila 1,2 dev/dak. mümkün)
Küçük ilan
Lahr
2.425 km
Çalışma platformlu yarı römork
FLIEGLSDS 350 Liftachse Alu-Bordwände Runge
Ara
Durumu: kullanılmış, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2013, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, Schmitz Cargobull S01 Platform, kaldırılabilir dingil, alüminyum yan duvarlar, stanchion
ÇELİK TAŞIMACILIĞI
Sorgu için iç no: 0326236
* ABS
* EBS
* 3 dingil, havalı süspansiyon
* Kaldırılabilir dingil
* Disk frenler
* BPW dingiller
* Alüminyum yan duvarlar
Kjdpfx Asyulw Noagjdk
* Stanchion (payanda)
Yükleme alanı boyutları:
Uzunluk: 13.600 mm
Genişlik: 2.520 mm
Lastikler:
1. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon / kaldırılabilir dingil
2. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon
3. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon
Fiyat: 9.900 EUR + %19 KDV
Sorularınız için aşağıdaki numaralardan bize ulaşabilirsiniz:
*
Konuştuğumuz diller: Almanca, İngilizce, Fransızca, Lehçe ve ?????
Yazım hataları, yanlışlıklar ve ara satış hakkı saklıdır.
Sizin için aramayı kolaylaştırıyoruz: "fliegl 3-achs containerchassis vario v3"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay








































































































































































































































