Kullanılmış Fliegl Dtl 300 Agrar satın al (13.726)

Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer - Steel welded construction - Turntable with robust ball-bearing slewing ring - Foldable rear support - 2 wheel chocks with holders - Full-width rear mudguards - Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel) Lashing Points Low-bed - 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t - 1x at the front on the gooseneck - 5x in the low-bed area - 1x in the rear bevel - 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks) - 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar Hitch Turntable Trailer - Drawbar with tested 40 mm towing eye Axles & Suspension - Drum brake axles, manufacturer’s choice - Laser-aligned axles/chassis to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tires - 235 / 75 R 17.5 Fulda - Steel twin wheels, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle - Connection lines approx. 60 cm extended - Without ABS, but with mechanical ALB, max. 60 km/h permissible Electrics - 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors - 2 white position lights front - 2 white/red lane marker lights rear - 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm - 1 LED beacon with bracket, switched via parking light (removable beacon) - 2 pairs of illuminated, extendable warning boards up to 3,000 mm Floor - Gooseneck front with steel / checker plate covering - Toolbox recessed into drive-over slope at gooseneck - Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area - Rear bevel with 70 mm softwood floor - Low-bed platform including rear bevel: 5,900 mm Loading Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Gsdpfx Ahoi Ri Agokjbl - Wood covered - Supported by spring assist Operating Instructions - For 10,000 kg axle load, a special permit is required; only indivisible loads permitted! - The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution) Country of Registration/Plates - Country of registration: Germany - With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible) - Prepared for two-line license plate holder - No ECE R 048 compliant contour marking / reflective strips Paintwork - Frame: DB 7350 Novagrau - 10-year warranty against rust-through - Drawbar galvanized or black, manufacturer’s choice - Loading ramps hot-dip galvanized Note: Archive images!

Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- Gbodpfxey Iztho Ahksl More data at: ! More details: !

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2018, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Arka havalı süspansiyon - Ön havalı süspansiyon = Notlar = Araçla ilgili sorularınız için Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur. Fliegl DTS 300 Alçak Yükleyici BPW akslar, kampanalı frenler, yay depolama, mekanik rampalar, izin verilen azami toplam ağırlık: 24.000 kg, boş ağırlık: 6.350 kg, taşıma kapasitesi: 17.650 kg, yükleme alanı ölçüleri: U 8.490 mm G 2.510 mm, lastik diş derinliği: 1. aks 7-12 mm, 2. aks 7-8 mm, 3. aks 4-7 mm Talep üzerine size leasing veya finansman teklifi sunabiliriz. Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur. Daha fazla bilgiyi web sitemizde bulabilirsiniz. ... Hatalar, değişiklikler ve ara satış hakkı saklıdır!!! Gedpfxoy Adc Is Ahkebl = Diğer Bilgiler = Boş ağırlık: 6.350 kg Yük kapasitesi: 17.650 kg Azami toplam ağırlık: 24.000 kg Dış ölçüler: 0x2550x3500 Daha fazla bilgi için Tobias Ebert ile iletişime geçebilirsiniz.

Koşul: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar = Gbedpfey Avafox Ahkol - BPW dingilleri - Kaldırılabilir dingil - Davlumbaz frenler = Notlar = Fliegl, 2016, BPW dingilleri, Birinci dingil kaldırılabilir, davlumbaz frenler = Firma bilgileri = Banka bilgileri: Rabobank Hesap No: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT kodu: RABONL2U - İşlemden önce banka bilgilerimizi mutlaka kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.

Koşul: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, döner tepe lambası, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (Anti Blokaj Sistemi), 3 m'ye kadar genişletilebilir, bağlama halkaları, 2 parçalı yükleme rampaları, mekanik rampalar, uzatılabilir çekme oku, yan alüminyum yan koruma, çift lastik, EBS Yapı: Yükleme uzunluğu yaklaşık 8,5 m, 3,05 m'ye kadar genişletilebilir. Demo araç! Parabolik süspansiyonlu ve arka aks dengelemeli, 3x 10t SAF aks, azami toplam ağırlık 30t olabilir, uzunluğu ayarlanabilir çekme oku. Gbsdpfx Ahsxbttqokel Stoktan, üretici adına güncel sicil kaydı ile yeni araç! AKSESUAR BİLGİSİ GARANTİSİZ, değişiklik, ara satış ve hata yapılabilir!

Koşul: yeni, makine/araç numarası: 2f960ff7c44de83fd060ec5df, boş ağırlık: 6.750 kg, azami yük ağırlığı: 32.250 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.670 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without load compensation Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard brackets, stone-resistant surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-measured: reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded line routing for easier service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle - driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (prerequisite must be met in the truck; only for standard tires). Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked to indicator "flashing side marker lights" 2 x 7-pin, non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel box body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Inside with ladder on front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane tailgate Internal width at bottom approx. 1,440 mm Aluminum tailgate, pendulum-mounted with "double-joint hinge" and with two-leaf door split 1/2 to 1/2, top with swing arm, with one grain chute per door Standing platform with access, connector plate for air/electrics and brakes with large clearance for optimum operability Roll tarp, to be stowed on FR-right, with central locking on FR-left Country of registration / plates Germany Type approval according to EC 2007/46 Superstructure stability according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Gsdpfji Rizfox Ahkjbl Body: RAL on request, single color Roll tarp: RAL 7035 light grey

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Gedpfsi Ri Rvjx Ahkjbl Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper Gedpei Riy Ejfx Ahkobl 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. Gsdpfx Ahoi Ri Ryekobl with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone 6 x in the low-bed First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm Gsdsi Ri Dlspfx Ahksbl 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Gedpfx Ahji Ri Ddjkobl 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck Gbedoi Riwfepfx Ahkjl After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 110 kW (149,56 bg), yakıt türü: elektrikli, renk: diğer, toplam ağırlık: 21.360 kg, Üretim yılı: 2026, Backenbrecher zerkleinern je nach Kapazität in der Regel 200 bis 300 Tonnen pro Stunde. Auf Kundenwunsch können auch Backenbrecher mit höherer Kapazität produziert werden. Die Backenbrecher werden hauptsächlich zum Zerkleinern der härtesten Gesteinsarten wie Basalt, Granit und Gabbro eingesetzt. Dank ihrer robusten und langlebigen Backenkonstruktion gehören sie seit Jahren zu den bevorzugten Brechern in der Bergbauindustrie. Durch die Backenspaltverstellung lässt sich das gewünschte Endprodukt und die gewünschte Kapazität optimal einstellen. Die Verstellung erfolgt bequem über Hydraulikzylinder. ALLGEMEINE MERKMALE UND AUSSTATTUNG: - Antrieb über Riemen- und Scheibensystem - Backenplatten aus speziell angefertigtem, hochverschleißfestem Guss-Manganstahl - Exzenterwelle aus Cr-, Ni-, Mo-legiertem, geschmiedetem Stahl - Hydraulische Einstellung der Backenöffnung - Brecherschutz durch Kniehebelplatten bei Überlastung - Alle verschleißexponierten Flächen mit Auskleidungsplatten versehen TECHNISCHE DATEN: • Modell: FABO CLK 1175 • Typ: Primär-Backenbrecher • Einlauföffnung: 1070 x 760 mm • Spaltöffnung: 45-160 mm • Max. Aufgabegröße: 760 mm • Leistung: 200–300 t/h • Motor: Schwerlast-GAMAK, 110 kW • Lager: Schwerlast-SKF-FAG • Gewicht: 21.360 kg • Abmessungen: 2730 x 1698 x 2492 mm • Inklusive Motor und Schutzabdeckungen *Alle unsere Produkte werden sorgfältig hergestellt und verfügen über 1 Jahr Herstellergarantie! *Montage und Bedienerschulung KOSTENLOS! Gbodpfxjy Dpl Ro Ahkol FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Koşul: ikinci el, boş ağırlık: 5.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2018, Üretim yılı: 2018, Boş ağırlık: 5100 kg. Web sitemizde mevcut tüm araçların genel bir görünümünü bulabilirsiniz. Finansmana mı ihtiyacınız var? Bireysel finansman çözümleri, tam hizmet sözleşmeleri ve telematik hizmetler sunuyoruz. Size kişisel olarak danışmanlık yapmaktan memnuniyet duyarız. Gedpfx Asy Rcdtohkobl

Koşul: ikinci el, boş ağırlık: 5.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2018, Üretim yılı: 2018, Boş ağırlık: 5100 kg. Web sitemizde mevcut tüm araçların genel bir görünümünü bulabilirsiniz. Finansmana mı ihtiyacınız var? Bireysel finansman çözümleri, tam hizmet sözleşmeleri ve telematik hizmetler sunuyoruz. Size kişisel olarak danışmanlık yapmaktan memnuniyet duyarız. Gbsdpfx Aoy Rcdmshkel

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Minimum material length: 270 mm - Maximum material length: unlimited - Maximum feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from the control panel - Cutting speed: 24 m/min - Spindle moulder motor power: 2 x 4 kW Gjdpfoy Rzcuox Ahkobl - Spindle moulder rotation speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Driven infeed roller conveyor, length: 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction port diameter: 150 mm - Dimensions (L x W x H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES - German-made - DTR technical documentation - Tongue and groove profiling machine - Complete set of cutters and heads included - Driven infeed roller conveyor - Unpainted - Used machine, very good condition Net price: 107,900 PLN Net price: 25,690 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), For sale: a complete jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Robust German construction – ideal for lifting and handling machines, molds, and components in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Technical Data: • Lifting capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Control: wired pendant station - Crane Specifications: • Overall arm length: 300 cm • Working outreach: approx. 270 cm • Type: column- or wall-mounted • Rigid steel construction • Manual slewing • Supplied complete with trolley and cabling — - Why choose this unit? • ABUS – one of the leading crane brands in Europe Gjdpfx Ajw Rddyjhkebl • Fully assembled unit ready for installation • Perfect for use with machining centers, lathes, welders • 100% industrial-grade set – not a consumer-grade product - The set includes: • ABUS GM3 500 kg hoist • Control pendant • 3 m crane arm • Travel trolley • Full wiring and accessories as pictured

Koşul: yeni, Profesyonel Dräger PSS 7000 hava solunum cihazı taşıyıcısı satılıktır. • Model: PSS 7000 • Manometre: 300 bara kadar • Parça No: 3355850 • Tip No: 3355068 • Teknik durumu iyi • Tüm kayışlar ve tokalar dahil • Sağlam iskelet, çatlak yok İlan görsellerindeki ürün satılmaktadır. Gbjdpfx Aoy Ilvgjhkjl Tüp ve maske dahil değildir. İtfaiyeci sınıfı ekipman – Dräger'in en üst serisi.

Koşul: ikinci el, boş ağırlık: 7.375 kg, azami yük ağırlığı: 27.625 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2012, yükleme alanı uzunluğu: 13.650 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5 160J, arka lastik boyutu: 385/65R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Stake pockets, -- typographical errors, mistakes, and changes reserved, sample images --, More data at: !, More details: ! Gedpfx Ahey Nivtjksbl

Koşul: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Godjy Niuispfx Ahkebl

Koşul: ikinci el, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Gsdpfx Aey Nitrohkobl

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT22702018968, boş ağırlık: 4.000 kg, azami yük ağırlığı: 23.000 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2016, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/55 R19,5", renk: kırmızı, Üretim yılı: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type: SZS 270 Mega RH 95 Weights and Dimensions: Permissible/technical gross weight: 27,000 kg Permissible/technical payload approx.: 23,000 kg Permissible/technical axle load: 16,000 kg Permissible/technical king pin load: 11,000 kg Unladen weight approx.: 4,000 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm Gjdpey Rxmwjfx Ahkjbl King pin mounting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Semi-trailer chassis for forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment. Note: In order to attach straps when using sideboards, the sideboards must be opened. 14 pairs of lashing rings, each rated at 2.5 t 24 t, 2-speed landing gear, single-side operation, with straight base section, without shift compensation Without landing legs Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Brake System: 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front (without connector hose) EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles which ensure the functionality of ABS! With lift & lower valve Vehicle stability control system Wheels and Tyres: 385/55 R19.5", manufacturer at OEM's discretion Steel rims, factory silver Electrical System: 24 Volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at the front, protected by round bar 2 red/white lane marker lights at the rear 2 x 7-pin interchangeable sockets at front (without connecting cable) Floor: Approx. 30 mm phenolic-coated plywood panels, with transverse joints featuring omega-section inserts, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor swelling due to weather influences possible. Front Wall/Front Corner Posts: 25 mm aluminum hollow section, approx. 1,350 mm high, steel volume-design corner posts with access holes for forklift drivers Approval / Certificates: Germany With Dekra inspection and certification 24/7 Service Hotline Pre-equipped for single-line license plate holder Warning panel to ECE-70 standard Contour marking with reflective strips as per ECE R 048, white on the sides and red at the rear Paintwork: Chassis: RAL 3002 carmine red Landing feet: black coated The images shown are archive photos! The vehicle may currently be in use!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT22702019232, boş ağırlık: 4.000 kg, azami yük ağırlığı: 23.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2016, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/55 R19,5", renk: kırmızı, Üretim yılı: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-Axle Flatbed Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Permissible/technical axle load: 16,000 kg Approx. platform length: 13,650 mm Approx. platform width: 2,480 mm Approx. kingpin installation dimension: 1,680 mm Approx. front corner dimension: 2,040 mm Chassis – Semi-Trailer, Logistics Version Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, equipped with "Load-Lock profile" for lashing strap attachment, 14 pairs of 2.5 t lashing rings, 24 t 2-speed landing gear, single-sided operation, chocks with holder, aluminum side underrun protection, galvanized steel rear underrun protection, quarter shell mudguards in front of and behind the axle assembly Axles & Suspension SAF small disc axles with disc brakes, air suspension Braking System 2-line compressed air braking system, spring-loaded parking brake, 2 error-proof coupling heads at the front, EBS, with raise & lower valve, vehicle stability control system Note: This trailer may only be towed by tractor units capable of ensuring the effectiveness of the ABS! Wheels and Tires 385/55 R19.5" steel rims, factory silver finish Electrical System 24 Volt, multi-chamber lights, lateral yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin anti-mistake sockets at the front, without connection cable Gbjdpfx Ajy Rxl Hjhkol Floor Approx. 30 mm thick phenolic plywood panels, omega-profile joint inserts, on longitudinal beams for high point load capacity (up to max. 7,100 kg forklift axle load) Note: Floor warping possible due to weather influences! Front Wall/Front Corner Posts 25 mm aluminum hollow profile, approx. 1,350 mm high, steel volumetric corner posts, with "holes" for forklift operators Approval/Signage With Dekra inspection and certificate, 24/7 service hotline, prepared for single-line license plate holder, warning panel according to ECE-70, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame painted RAL 3002 carmine red, landing gear coated black The images shown are archive photos! The vehicle may currently be in use!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902037035, boş ağırlık: 4.795 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.040 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2025, These images are archive photos! Fine-grain steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin, Curved front panel "patented" 24 t, 2-speed landing gear with single-side operation, featuring a semi-circular lower section and straight mounting plate with load compensator Wheel chocks with holder Retractable underrun protection Half-shell mudguards Integrated "mudguard holder" with stone-repellent surface With anti-spray mud flaps on last axle only Tarp bar with holder Tow hook at rear (not included on Revolution model) Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Axles/chassis laser alignment" – reduces tire wear and fuel consumption Axles in off-road specification Air suspension First axle automatic lift axle, including forced lowering and start-assist, activated by “3x braking” (start-assist functions up to 30% axle overload and max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Brake System 2-line compressed air brake system Colored line routing for easy service Gbedpfsy Rrplex Ahkjl Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting line 24 Volt EBS, electronic braking system, with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that support effective ABS operation! With raise/lower valve Vehicle stability control system Automatic tipping lowering with shut-off valve "TPMS" tire pressure monitoring system, display via towing vehicle’s dashboard through EBS (truck must be factory-equipped, only on standard tire fitments) Wheels and Tires 385/65 R22.5 Steel rims Electrics 24-volt, multi-chamber LED rear lights, yellow LED side marker lights, LED license plate light (Note: certain towing vehicles may give error messages although functionality is assured) Side yellow LED marker lights synchronized with indicators (“flashing side marker lights”) 2 white LED clearance lights at front 2 white/red LED lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connecting cables Additional LED work light recessed into the rear, switched via reverse gear Hydraulics Low-pressure cylinder up to max. 170 bar, Operation hydraulic via PTO on truck Body Aluminum box body made of high-quality, abrasion-resistant material. Inclined front wall, 5 mm thick, with external cylinder mount. Side walls made from 30 mm hollow chamber profiles, neatly welded, with a bulk-material-repellent top edge profile. Internal ladder on front wall (not in combination with Cramaro). Exterior shovel and broom holder on front wall. Greenline - conical and aerodynamic tipper shape "Membrane" rear wall Rear wall as pendulum flap with "double-joint hinge", externally mounted with double hook locking. Rear wall with rubber seal Continuous 6 mm thick floor Standing platform with access, connector panel for air/electrics and brake, with generous clearance for optimal operability Roll tarp: single-sided stowage on FR-right, with central locking on FR-left Operating Instructions For salt, lime, etc. transports, we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion and material damage.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902031191, boş ağırlık: 4.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 49 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.040 mm, lastik boyutu: 385/65 R 22,5*, renk: gri, Üretim yılı: 2024, The images are archival photographs. The vehicle may still be in use! Chassis - Tipping Semi-Trailer Fine-grain steel welded construction, lightweight design, kingpin plate with replaceable 2" kingpin. Curved front panel "patented". 24 t, 2-speed landing gear, single-side operation, straight foot, with compensating slide. 2x wheel chocks with holders. Side underrun protection: aluminium. Foldable rear underrun protection. 6x half-shell fenders. Integrated "fender bracket" with stone-repellent surface. 2x anti-spray mudflaps only on the last axle. Axles & Suspension 3x SAF disc brake axles, off-road spec. Axles/chassis laser-aligned – reduces tire wear and fuel consumption. Air suspension. 1st axle: automatic lift axle, including forced lowering and start-off assist, activated by "3x braking" (start-off assist is operable up to 30% axle overload and max. speed of 25 km/h). "Hot-dip galvanized lift axle mechanism" with 10-year anti-corrosion warranty. Brake System Dual-line air brake system. Color-coded line routing for easy service. Spring-loaded parking brake. 2 non-interchangeable couplings at the front (no connecting line supplied). EBS from Haldex, electronic braking system with EBS socket at the front (no interconnecting cable supplied). Attention: This trailer may only be towed by tractor units that ensure ABS functionality! Lift & lower valve included. Vehicle stability system. Wheels and Tyres 6x 385/65 R22.5, manufacturer at manufacturer’s discretion. 6x steel rims, manufacturer at manufacturer’s discretion. Electrics 24 Volt, multi-chamber tail lights, side yellow LED lights. 2 white position lamps at the front. 2 white/red lane marker lamps at the rear. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front (no connecting cables supplied). Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed component, NW 48 mm (without hose connection). Gsdjy Rl Unjpfx Ahkebl Hydraulically operated via truck PTO. Body Aluminium square tipper body made from high-grade, abrasion-resistant material. Slanted front wall 5 mm thick, with external cylinder mounting. Side walls from 30 mm hollow chamber profiles, precision-welded, with bulk material repellent top rail. Internal ladder at front wall (not with Cramaro option). Shovel and broom holder on outside of front wall. Greenline – tapered, aerodynamic body shape. "Membrane" tailgate: Tailgate as pendulum flap with "double joint hinge", externally mounted, with dual hook locks. Tailgate with rubber sealing. Note: Heat resistant up to max. 170°C. Continuous 5 mm thick floor, Brinell hardness 110. Note: Only suitable for transporting sand, grit, and round gravel up to max. 20mm grain size! All other transported goods are excluded from warranty! Operating Instructions For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically feasible; depending on payload, permitted gross weight may not be achievable due to axle, support, and fifth-wheel load limits (poor handling/tracking due to incorrect payload distribution is possible). Paintwork Frame: DB 7350 Nova Grey ("10-year warranty against corrosion") Landing legs: black coated Body: natural aluminium Sliding tarp: RAL 7035 light grey