Kullanılmış Fliegl Dts S 300 Parab/Feder satın al (76.206)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Lowbed trailer chassis
Steel welded construction
Turntable with robust ball bearing ring
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear splash guards
Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3
1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included)
Extendable widenings up to 3,000 mm
Storage compartment for timber planks in the center of the loading area
70 mm timber planks for extension to 3,000 mm
Lashing eyes for low loader (40 lashing points)
1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t
4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps)
7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t
1 front cranked area
6 in the lowbed deck
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
2 pairs of additional folding lashing eyes, each 10 t
1 located in the cranked area (protruding)
1 recessed in the floor behind the last axle
Towing equipment for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles (manufacturer’s choice)
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation)
Wheels and tires
235 / 75 R 17.5
(manufacturer’s choice)
Steel rims, dual configuration, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads front, with connecting lines to the tractor unit,
ABS and ALB, with ABS plug front, with connection cable
Brand: Wabco or Knorr
Electric system
24 volt, multi-chamber lights, yellow LED side marker lights
2 white front position lights
2 white/red lane marker lights rear
2 x 7-pin non-interchangeable plugs at front, with connecting cable
1 LED rotating beacon light with bracket, switched via parking light (removable lamp)
2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm
Floor
Front crank area with steel / chequer plate covering
Toolbox recessed in the ramp bevel to the crank
Rodpfx Alji Ri Ddjmet
Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area
Rear ramp bevel with 70 mm softwood floor
Lowbed loading area incl. rear ramp bevel: 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-covered
With spring assist
Country of approval / Number plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Warning board according to ECE-70
Painting
Frame hot-dip galvanized incl. passivation
15-year warranty against corrosion
Drawbar galvanized or black, as per manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis for Low-Loader Trailer
Steel welded construction
Turntable bogie with heavy-duty slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Full-width rear spray flap
Half-shell fenders on 1st axle with anti-spray flaps
Additional anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock
Extendable width up to 3,000 mm
Central storage compartment for wooden planks in the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing rings for low-loader (40 securing points)
1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t
4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps)
7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t
1 x at the front on the cranked zone
6 x in the low-bed
First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes
2 additional pairs of folding lashing rings, each rated for 10 t
1 x on the cranked zone (protruding)
1 x recessed in the floor behind the last axle
Drawbar / Turntable coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice
Steel rims, twin arrangement, factory silver
Brake System
2-line compressed air brake system
Spring-loaded parking brake
2 anti-swap coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front, including connecting cable
Make: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin anti-swap plugs at the front, with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm
Floor
Front cranked section with steel / tread plate surface
Storage box recessed in the ramp transition to cranked section
Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface
Rear bevel with 70 mm softwood floor
Low-loader area incl. rear bevel: 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable
Wooden inlay
Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Rsdpei Ri Dlefx Almet
Registration / Plates
Country of registration: Germany
24/7 Service Hotline
Prepared for two-line plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation
15-year warranty against rust-through
Drawbar galvanized or black, manufacturer’s choice
Ramps hot-dip galvanized
Note! These are archive images!
Küçük ilan
Bovenden
2.411 km
Alçak şasi römork
FlieglDTS-S 300, verbreiterbar auf 3,05m
Çağrı
Koşul: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, döner tepe lambası, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (Anti Blokaj Sistemi), 3 m'ye kadar genişletilebilir, bağlama halkaları, 2 parçalı yükleme rampaları, mekanik rampalar, uzatılabilir çekme oku, yan alüminyum yan koruma, çift lastik, EBS
Yapı: Yükleme uzunluğu yaklaşık 8,5 m, 3,05 m'ye kadar genişletilebilir. Demo araç!
Parabolik süspansiyonlu ve arka aks dengelemeli, 3x 10t SAF aks, azami toplam ağırlık 30t olabilir, uzunluğu ayarlanabilir çekme oku.
Rsdpjxbttqjfx Almst
Stoktan, üretici adına güncel sicil kaydı ile yeni araç! AKSESUAR BİLGİSİ GARANTİSİZ, değişiklik, ara satış ve hata yapılabilir!

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S Parab/Feder
Çağrı
Koşul: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflap
Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles
Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included)
1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable widenings to 3,000 mm
70 mm wooden planks for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Low-bed trailer lashing points (40 lashing options)
1 pair of 5 t lashing eyes on gooseneck
9 pairs of 10 t lashing pins, recessed into the top and side of the external frame
2 x on the front gooseneck
7 x in the low-bed area
6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps)
3 additional pairs of foldable lashing eyes, each 10 t
1 x inside next to the main frame at the start of the low-bed
1 x on the gooseneck (overhanging)
1 x recessed in the floor behind the last axle
Trailer drawbar
Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin wheel configuration, factory silver
Brake system
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS socket at the front, with connecting cable
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red tracking lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
1 LED beacon with holder, operated via parking lights (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Rsdpfx Aloi Ri A Ssmet
Floor
Front gooseneck section with steel/chequer plate covering
Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area
Rear incline with 70 mm softwood flooring
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lift assistance
Registration/country plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Conspicuity markings with reflective strips according to ECE R 048, side white and rear red
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation—15-year corrosion warranty
Towing bar galvanized or black, at manufacturer’s option
Ramps hot-dip galvanized
Note: These are archive photos!
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
FlieglDTS 300 3 Achs Tiefladeranhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm.
Vehicle is being offered on behalf of a bank.
Redey E H E Dspfx Almst
-- Subject to typographical errors, mistakes, and modifications. Sample images --
More data at: !
More details: !
Küçük ilan
Burghaun
2.380 km
Düşük yükleyici
FlieglDTS 300 Rampen BPW auf 3.000mm verbreiterbar
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2018, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- Arka havalı süspansiyon
- Ön havalı süspansiyon
= Notlar =
Araçla ilgili sorularınız için Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur.
Fliegl DTS 300 Alçak Yükleyici
BPW akslar, kampanalı frenler, yay depolama, mekanik rampalar, izin verilen azami toplam ağırlık: 24.000 kg, boş ağırlık: 6.350 kg, taşıma kapasitesi: 17.650 kg, yükleme alanı ölçüleri: U 8.490 mm G 2.510 mm, lastik diş derinliği: 1. aks 7-12 mm, 2. aks 7-8 mm, 3. aks 4-7 mm
Talep üzerine size leasing veya finansman teklifi sunabiliriz.
Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur.
Daha fazla bilgiyi web sitemizde bulabilirsiniz.
... Hatalar, değişiklikler ve ara satış hakkı saklıdır!!!
Rjdpsy Adc Iofx Almjt
= Diğer Bilgiler =
Boş ağırlık: 6.350 kg
Yük kapasitesi: 17.650 kg
Azami toplam ağırlık: 24.000 kg
Dış ölçüler: 0x2550x3500
Daha fazla bilgi için Tobias Ebert ile iletişime geçebilirsiniz.
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 mit Radmulden
Çağrı
Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis low-loader trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Aluminum side underrun protection
Full-width rear mudflap
Rsdpfxei Ri Rvo Almot
Quarter-shell mudguards in front of the 1st axle
1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess.
2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess.
Extensions telescopic to 3,000 mm (not at rear taper)
(The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm)
Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Wooden planks 70 mm for widening to 3000 mm
Lashing eyes low-loader
1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t
4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps)
7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t
1 x front in the step
6 x in the deep bed
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm
Drawgear - Turntable trailer drawbar
Drawbar with tested 40 mm drawbar eye
Axles + Suspension
SAF drum braked axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mountings
Wheels and tyres
235/75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front
2 white/red lane marker lights at rear
2 x 7-pin foolproof plugs at front with connecting cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Front step with steel/chequer plate covering
Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering
Rear slope with 70 mm softwood floor
Low-loader area including rear slope 6500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
with wooden covering
with spring-assist lifting
Operating notes
For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P
Çağrı
Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear spray flaps
Extendable widening sections up to 3,000 mm (not including rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central storage compartment for timber boards on the loading platform
70 mm timber boards for widening up to 3,000 mm
Lashing eyes for low loader
3 pairs of 10 t lashing points integrated into the front floor
6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame
1x in the neck area
The remainder are distributed in between, distance not greater than 1,200 mm
1x rear taper
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Towing Device Trailer Turntable
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation)
Brake System
2-line compressed air brake system
Colored line routing for easy servicing.
Spring-loaded parking brake included.
2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit
ABS and ALB with ABS connector at the front, with connecting cable
Rodpfsi Riy Eex Almst
Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
Wheels and Tires
235 / 75 R 17.5
Manufacturer's choice
Twin steel rims, factory silver
Electrics
24 Volt, multi-chamber tail lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2x 7-pin non-interchangeable connectors at the front, with connecting cable
1 LED beacon with holder, operated via parking light (removable lamp)
2 pairs of warning signs, double LED illuminated and extendable to 3,000mm
Floor
Front area steel floor,
then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area
Rear taper with 70 mm softwood floor
Low-bed area incl. rear taper: 8,200 mm
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Timber deck included
With spring-assisted lifting
Operating Notes
At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted!
The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Country of Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips as per ECE R 048, side white and rear red
Paint finish
Frame DB 7350 Nova grey
10-year corrosion warranty
Drawbar galvanized or black,
manufacturer’s choice
Steel loading ramps hot-dip galvanized
Please note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P mit Radmulde
Çağrı
Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note!
The frame is 400 mm higher than the wheel recess in the main beam area.
If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer.
Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section
Rear support foldable
2 wheel chocks with holders
Side underrun protection in aluminium
Rear mudflaps across the full width
Extendable widening to 3,000 mm (not in rear bevel area)
(The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
3 pairs of lashing points integrated into the front floor, each 10 t Incl.
6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t
1 x in the gooseneck area
The rest distributed in between, distance not greater than 1200 mm
1 x rear bevel
5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included)
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
SAF drum brake axles
Axle/undercarriage laser measured for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mounting
Brake System
2-line compressed air brake system
Colour-coded piping for easy servicing
Spring-actuated parking brake
Rjdpfxoi Ri Ryo Almet
2 non-interchangeable coupling heads at the front with connecting lines to the truck
ABS and ALB, with ABS socket at the front, including connection cable
Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS!
Wheels and Tyres
235 / 75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white front position lights
2 white/red rear marker lights
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, incl.
followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering
Rear bevel with 70 mm softwood floor
Low loader platform incl. rear bevel 8,200 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
covered with wood
with spring lift assistance
Operating Instructions
With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution)
Country of Approval / Plates
Country of approval: Germany Incl.
with Dekra approval and certificate (acco
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300
Çağrı
Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing race
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flaps
Rodpfx Alji Riwfemot
Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included)
Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width)
Central storage compartment for wooden beams on the loading area
70 mm wooden beams for widening to 3,000 mm
Lashing points on low loader
1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t
7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t
1x at the front on the gooseneck
6x in the drop deck
First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm
5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included)
2 pairs of additional fold-down lashing eyes, each rated 10t
1x on the gooseneck (projecting)
1x recessed in the floor behind the last axle
Trailer turntable drawgear
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice with M&S marking
Steel wheels in twin arrangement, factory silver
Brake System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle
ABS and ALB, with ABS connector at front, with connection cable
Brand: Wabco or Knorr
Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at front, with connection cable
1 LED rotating beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000mm
Floor
Gooseneck at front with steel/chequer plate covering
Storage box recessed on the transition slope to gooseneck
After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area
Rear slope with 70 mm softwood floor
Low-bed platform including rear slope 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift)
Wooden inlay on ramps
Spring lifting assistance
Operating instructions
At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!!
The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution)
Country of registration/Plates
Country of registration: Germany
Approval according t
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S 400 Parab/Hydr.
Çağrı
Koşul: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Lowbed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear splash guard
Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm
Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Timber beams 70 mm for extension to 3,000 mm
Storage compartment for timber beams under loading area
Lashing rings lowbed (40 lashing points)
1 pair of lashing rings on gooseneck, each 5t
9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t
2 x on gooseneck in front
7 x in the lowbed area
6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps)
3 additional pairs of folding lashing rings, each 10 t
1 x inside next to main frame at start of lowbed
1 x on gooseneck (protrudes)
1 x recessed in the floor behind the last axle
Trailer drawbar assembly
Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation)
Wheels and Tires
235 / 75 R 17.5
as selected by manufacturer
Steel twin wheels, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 anti-mismatch coupling heads at front, with connection lines to truck
ABS and ALB, with ABS plug at front, with connection cable
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red marker lights at rear
2 x 7-pin anti-mismatch plugs at front, with connection cable
1 LED rotating beacon with holder, controlled via parking light (beacon detachable)
2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel/aluminium chequer plate covering
followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells
Rear incline with 70 mm softwood floor
Access ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
with timber surfacing
Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left
Hydraulic connection with SVK plug NW 10/3, including connecting hose
Approval country / Plates
Approval country: Germany
24/7 service hotline
Prepared for two-line number plate holder
Rjdpji Ri Dasfx Almjt
Contour marking with reflective tape as per ECE R 048, side white and rear red
Warning sign according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty
Drawbar galvanized or black, as per manufacturer’s choice
Access ramps hot-dip galvanized
Note: Images are for illustrative purposes (archive images)!
Küçük ilan
Apeldoorn
2.688 km
Yükleme platformu
FlieglDPS 300 2016 BPW, Trommelremmen
Çağrı
Koşul: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar =
- BPW dingilleri
- Kaldırılabilir dingil
- Davlumbaz frenler
= Notlar =
Fliegl,
2016,
BPW dingilleri,
Birinci dingil kaldırılabilir,
davlumbaz frenler
= Firma bilgileri =
Banka bilgileri:
Rabobank Hesap No: 39.33.10.655
IBAN: NL73RABO0393310655
SWIFT kodu: RABONL2U
Rjdpfx Aoy Avafslmot
- İşlemden önce banka bilgilerimizi mutlaka kontrol edin!
- Araç rezervasyonu depozito olmadan mümkün değildir.
- Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.
Küçük ilan
Radomsko
1.830 km
Fladder 300/GYRO Fırçalama Makinesi
Fladder Danmark A/S, Amager, DaniaFladder 300/GYRO-1300 VAC
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 2001, Fladder 300/GYRO, düz yüzeylerin işlenmesi için kullanılan bir makinedir (örneğin sac levhalar, alüminyum, çelik veya plastik parçalar). Başlıca kullanım alanları şunlardır:
- çapak alma (keskin kenarların giderilmesi),
- lazer, plazma veya zımbalama sonrası yüzey temizliği,
- kenar yuvarlama,
- boyama/kaplama öncesi yüzey hazırlığı,
- pas, tufal ve oksit kalıntılarının giderilmesi.
Rjdpfx Alsw Uabpjmjt
Teknik veriler:
Model: Fladder 300/GYRO-1300 VAC
Çalışma genişliği: 1300 mm
Güç kaynağı: 3 × 400 V, 50 Hz
Güç tüketimi: 63 A
Koruma sınıfı: IP54
Motorlar: İşleme üniteleri ve konveyör bandı için bağımsız tahrikler
Bant ilerleme hızı: Ayarlanabilir
GYRO sistemi: Yörüngesel-döner iş mili başlıkları (dengeli çapak alma ve yüzey finisajı)
Donanım: Toz emişli konveyör bant (VAC), kontrol paneli, acil durdurma butonu
Üretim yılı: 2001
Makine iyi teknik durumda
Eksiksiz, kullanıma hazır
Yerinde inceleme imkanı mevcut
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTL 300 Agrar
Çağrı
Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
- Steel welded construction
- Turntable with robust ball-bearing slewing ring
- Foldable rear support
- 2 wheel chocks with holders
- Full-width rear mudguards
- Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel)
Lashing Points Low-bed
- 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t
- 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t
- 1x at the front on the gooseneck
- 5x in the low-bed area
- 1x in the rear bevel
- 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks)
- 5x gooseneck, 6x low-bed, 1x rear bevel
Drawbar Hitch Turntable Trailer
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- Drum brake axles, manufacturer’s choice
- Laser-aligned axles/chassis to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance)
Wheels and Tires
- 235 / 75 R 17.5 Fulda
- Steel twin wheels, factory silver
Brake System
- 2-line compressed air brake system
- Spring-loaded parking brake
- 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle
- Connection lines approx. 60 cm extended
- Without ABS, but with mechanical ALB, max. 60 km/h permissible
Electrics
- 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors
- 2 white position lights front
- 2 white/red lane marker lights rear
- 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm
- 1 LED beacon with bracket, switched via parking light (removable beacon)
- 2 pairs of illuminated, extendable warning boards up to 3,000 mm
Floor
- Gooseneck front with steel / checker plate covering
- Toolbox recessed into drive-over slope at gooseneck
- Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area
- Rear bevel with 70 mm softwood floor
- Low-bed platform including rear bevel: 5,900 mm
Loading Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wood covered
- Supported by spring assist
Redpfxsi Ri Ago Almst
Operating Instructions
- For 10,000 kg axle load, a special permit is required; only indivisible loads permitted!
- The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution)
Country of Registration/Plates
- Country of registration: Germany
- With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible)
- Prepared for two-line license plate holder
- No ECE R 048 compliant contour marking / reflective strips
Paintwork
- Frame: DB 7350 Novagrau
- 10-year warranty against rust-through
- Drawbar galvanized or black, manufacturer’s choice
- Loading ramps hot-dip galvanized
Note: Archive images!
Küçük ilan
Grünkraut
2.276 km
Tambur kırıcı/odun parçalayıcı
S&F GmbHATH 300
Çağrı
Koşul: yeni, Üretim yılı: 2026, Tambur kırıcı serisi ATH 300
Rjdpfeuz Hmxsx Almst
Yatay beslemeli S&F kırıcılar ve tambur kırıcılar ağaç işleme sektörünün birçok alanında (kereste fabrikaları, ağaç işleri) kullanılmaktadır. “ATH” serisindeki yongalayıcılar, örneğin selüloz endüstrisi için kaliteli odun yongaları veya enerji üretimi için yakıt odun yongaları olarak, artık odunlardan düşük ince içerikli, yüksek kaliteli ve homojen odun yongaları üretir.
ATH 300 serisi
- Besleme yüksekliği: 300 mm
- Besleme genişliği: 500 | 700 | 1000 mm
- Doğrama bıçağı sayısı: 2 - 6 adet
- Tezgah bıçağı sayısı: 2 adet
- Rotor çapı: 700 mm
- Besleme silindiri sayısı: 3 adet
- Verim: yaklaşık olarak 70 oda/saat *
- Kesme uzunluğu: 5 - 80 mm
- Parçalayıcı tahrik gücü: 37 - 250 kW
- Besleme silindirlerinin tahrik gücü: 2 x 3,0 kW
- Çalışma/kontrol voltajı: 400/220 V, 50 Hz
- Ağırlık: 3.500 - 5.000 kg
*kırma uzunluğuna, kW ana motor gücüne, bıçak sayısına, beslemeye bağlı olarak
Avantajları:
- Maksimum verim
- Düşük para cezası içeriği
- Düşük bakım
- Esnek kullanım
- Bireysel üretim
Daha fazla bilgiye mi ihtiyacınız var?
Bizimle konuşun! Size danışmanlık yapmaktan mutluluk duyarız.
Tambur parçalayıcı | Odun parçalayıcı | Bilgisayar Korsanları | Parçalayıcı | Odun parçalayıcı | Parçalayıcı | Odun parçalayıcı
Küçük ilan
Avusturya
1.826 km
Açıcı
HESSE by COILTECHCMC S 500 300 M D1200
Çağrı
Koşul: yeni, Üretim yılı: 2026, Durum: yeni
Üretim yılı: 2026
Stok numarası: 070152
Teslimat süresi: hemen, ara satış mümkündür
Menşei ülke: Türkiye
Fiyat: 4.800 €
Stokta: 1 adet
Bobin ağırlığı: 500 kg
Maks. dış bobin çapı: 1200 mm
Min. iç bobin çapı: 400 mm
Maks. iç bobin çapı: 550 mm
Maks. bobin genişliği: 300 mm
Min. bobin genişliği: 50 mm
Pnömatik baskı kolu olan versiyonda min. bobin genişliği: 80 mm
Motor: 0,55 kW
Uzunluk: 1400 mm
Genişlik: 1200 mm
Yükseklik: 1550 mm
Redswirz Sjpfx Almot
Ağırlık: 190 kg
Motorlu tahrik
4 çeneli mekanik ayarlanabilir bobin mili
Açma hızı ile hızlanma ve yavaşlama süresi için hız kontrolü
Sarkma kontrolü için fotoelektrik SICK yaklaşım sensörü
ALTERNATİFLER (Fiyatlar talep üzerine):
Pnömatik baskı kollu versiyon
Tahriksiz, frenli, pnömatik baskı kollu veya baskı kolsuz versiyon
Küçük ilan
İtalya
1.943 km
Tek taraflı kenar bantlama makinesi
HOMAGEDGETEQ S-390 - LOOPTEQ O-300
Çağrı
Koşul: ikinci el, makine/araç numarası: 008325, Pozisyon 1: Tek taraflı kenar bantlama makinesi HOMAG-EDGETEQ S-390 - LOOPTEQ O-300
Pozisyon 2: Plaka geri besleme sistemi HOMAG-EDGETEQ S-390 - LOOPTEQ O-300
Rsdpex Hpklofx Almet
Tıklama
Açık artırma bitmiş
Eberswalde
2.256 km
Derin çekme üretim presi
KNUTHKTP 300 S
Üretim yılı: 2023, Koşul: ikinci el, makine/araç numarası: H300SV23-17, KTP 300 S, çekme yastığının yandan çıkarılması özelliğine sahip bir üretim presidir. Kapasitesi 300 ton, strok uzunluğu 1000 mm'dir. Maksimum kalıp ölçüsü 1400 x 1200 mm, maksimum kalıp ağırlığı ise 5.000 kg'dır. Elektrik bağlantısı 400V, 50/60Hz, 36kW'dır.
Rsdjyn Ni Ajpfx Almjt
Küçük ilan
Achern
2.420 km
Parmak birleştirme hattı
MINDAMACH I -S- 300-3000 mm
Çağrı
Koşul: yeni, Üretim yılı: 2026, makine/araç numarası: 2022-04, Kama diş ekleme tesisleri, kama diş makineleri, kama diş ekleme hattı
Ahşap paketler için finger-joint tesisi
-Ahşap giriş uzunluğu: 300 - 3000 mm
-Maksimum freze yüksekliği: 250 mm
-Ahşap sabit, takımlar hareket ediyor
-Ahşap kalınlığı 25 mm olduğunda kapasite: 72 parça/dk
-Ahşap kalınlığı 35 mm olduğunda kapasite: 51 parça/dk
> sadece en iyi fingerjoint sistemi <
Rsdpfx Aecbyqfolmet
Teslimat süresi yaklaşık 10 ay
Üretici ve tedarikçi: MINDA Industrieanlagen
Daha fazla bilgi için lütfen talep gönderiniz
Küçük ilan
Eislingen/Fils
2.304 km
Açıcı-düzleştirici
SCHLEICHERRM-S 300 / H 2
Çağrı
Koşul: ikinci el, Üretim yılı: 1971, Malzeme genişliği 300 mm
Bobin ağırlığı 2,0 t
Malzeme kalınlığı 1,0 - 5,0 mm
Bobin iç çapı 440 - 520 mm
Bobin dış çapı 1320 mm
Redpfx Ajvut Dtelmot
Doğrultma silindiri sayısı 6
Doğrultma silindiri çapı 70 mm
Çekiş silindiri sayısı 2
Çekiş silindiri çapı 70 mm
Tahrik gücü 1,1 kW
Makara (haspel) ağırlığı 2,0 t
Haspel alan gereksinimi (GxDxY) 2,0 x 2,0 x 1,7 m
Doğrultma makinesi ağırlığı 1,3 t
Doğrultma makinesi alan gereksinimi (GxDxY) 2,7 x 1,3 x 2,4 m
Doğrultma makinesi RM-S 300
kademesiz ayarlanabilir tahrik, pnömatik çekiş silindirleri, otomatik bant besleme kaması, hidrolik halka köprüsü, üst silindirlerin hızlı açılması, bant halka kontrolü
Haspel H 2
yardımcı tahrikli, hidrolik baskı tertibatı, hidrolik yayma, manuel hareket imkanı
mevcut durumunda, çalıştırılmadan satılır
Çalıştırma (mevcut durumda) fiyatı talep üzerine
Küçük ilan
Pécs
1.597 km
Fan
Schukos 300
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 1994, Hava hacmi: 6610 m³/h
Motor gücü: 7,5 kW
Statik basınç: 1930 Pa
Rodpfx Ajvw S R Dslmst
Bağlantı iç çapı: 300 mm
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Wadowice
1.738 km
Kenar bantlama makinesi EDGETEQ S-300
HOMAGEDGETEQ S-300
Çağrı
Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2019, makine/araç numarası: 0-261-04-6440, Fonksiyonellik: tamamen fonksiyonel, Feeding and removal of workpieces:
• Pressure beam with rollers
• Variable feed speed 8-14 m/min
• Automatic groove fence
• QA65 glue pot
Edge banding:
• Multifunctional profile scraper unit with R-2 and R-1 tools
• Corner processing unit with R-2 tool
Element finishing:
• Anti-adhesive and cleaning fluid
• End trimming unit
Rjdpfxoykzdke Almjt
• Edge milling unit with R-2 and R-1 tools
• Flat scraper, top-bottom polishing unit
• Prepared for connection to return system
Documentation
• Selected language: Polish
• Documentation available via machine controller and as hard copy
General information
• Year of manufacture: 2019
• Machine length: 5573 mm
• HOMAG POWER TOUCH control system
• CE mark
• Total processed length: 800,000 m
Küçük ilan
Mala Vranjska
1.434 km
Mikser
SindVacuum Paddle Mixer S 300 l 2P-V
Çağrı
Koşul: yeni, Tip: S 300 l 2P-V Komple paslanmaz çelik Hazne kapasitesi 300 litre Çift çalışma milleri Millerin her iki yönde dönüşü Vakum: 0,04 – 0,06 mpa Elektrik gücü: 4,4 kW Voltaj: 380 V / 50 Hz Boşaltma pnömatik kanatları PLC + Dokunmatik ekran kontrolü Gecikmeli başlatma 99 program Makinenin kurulum ölçüleri cm olarak: Genişlik: 135 Uzunluk: 84 Yükseklik: 142 Teslim süresi: Ön ödeme yapıldıktan sonra, bir iş günü
Rsdpfohd U R Hsx Almot
Küçük ilan
Ahaus
2.615 km
Kaynak döner tablası
MBECO S 300
Çağrı
Koşul: yeni, Tabla çapı 500 mm
Tablanın yatay taşıma kapasitesi 300 kg.
Tablanın dikey taşıma kapasitesi 150 kg.
Eğme aralığı 0 - 90,0 derece
Dönme hızı 0,2 - 2,5 dev/dak
Delik çapı 90,0 mm
Tabla yüksekliği ~ 650 mm
Motor 230 Volt
Makine ağırlığı yaklaşık 90,0 kg.
Boyutlar U-G-Y 385 x 340 x 375 mm
Donanım:
- Tabla 0° ile 90° arasında eğilip kilitlenebilir
- Manuel eğme
- Başlat/durdur bağımsız ayak pedalı ile
- Dönüş yönü sağ/sol seçilebilir
- Dönme süresi ayarlanabilir
- Kaynak makinesinin kontrol ile yönetimi
- 350 Amper topraklama bağlantısı
Teslimat kapsamı:
- Kontrol ünitesi (entegre)
- Ayak pedalı
Rjdpoxabl Sjfx Almst
Küçük ilan
Karlstein am Main
2.399 km
Yürüyen zeminli yarı römork
StasS 300 ZX Cargofloor 10 mm 2x Liftachse
Çağrı
Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.990 kg, azami yük ağırlığı: 28.010 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 89 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: beyaz, Üretim yılı: 2023, Nesne numarası # 30572
Cargofloor 10 mm
hareketli duvar
pnomatik kapı kilidi
Jost dingilleri
disk fren
2x kaldırılabilir dingil
Lastik: 385/65 R 22,5
Üst yapı iç ölçüleri: 13.450 x 2.450 x 2.700 mm
çift kanat portal kapılar
Rjdox Art Sepfx Almot
rulo brandası
merdivenli platform
Wabco Smart Board, 212.081 km
alet kutusu
çalışma projektörleri
yan etek alt koruma
merdiven/süpürge tutucu
arka far koruması
yükseltme/alçaltma
ABS/EBS
Jost ayak sistemi
Talep üzerine leasing veya finansman mümkündür!!
Sizin için aramayı kolaylaştırıyoruz: "fliegl dts s 300 parab/feder"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay











































































































































