Kullanılmış Kraussmaffei Km420-2000Cx satın al (226)

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 6.200 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 4.200 kN, vida çapı: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei enjeksiyon kalıplama makinesi, 420 ton sıkıştırma kuvveti. Sadece 6.000 saat otomatik çalışma. Üretim yılı 2008. MC5 kontrolü. Vida çapı 75 mm. Ekstralar: 8 sıcak yolluk bölgesi. Sabit plakada 2 çekirdek, hareketli plakada 2 çekirdek. Hareketli plakada 1 pnömatik valf. Enjeksiyon kalıplama makinesi, UK Transitus'un uzman teknik ekibi tarafından yenilenmiş olarak teslim edilir. Müşterilerimizin tesislerinde devreye alma hizmeti sunabilir ve kurulumun tamamlanmasının ardından çalışmasını sağlayabiliriz. Teknik Detaylar 75 mm vida Iedpfxjwq D Efs Acdsib Enjeksiyon basıncı: 1635 bar Atış hacmi: 1237 cm3 Atış ağırlığı: 1126 g Plakalar arasındaki maksimum mesafe: 1400 mm Minimum kalıp kalınlığı: 380 mm Açılma stroku: 1020 mm Kolonlar arasındaki mesafe: 900 x 800 mm Plaka boyutları: 1270 x 1230 mm 75 mm vida Sıkıştırma kuvveti: 4200 kN Üretim yılı: 2008 Çalışma saatleri: 6282

Koşul: mükemmel (kullanılmış), Üretim yılı: 2012, 1 adet kullanılmış enjeksiyon kalıp makinesi Üretici: KRAUSS MAFFEI Model: KM420-4300CX Üretim yılı: 2012 Kapatma kuvveti: 420 ton Kolon aralığı: 800 x 800 mm Vida çapı: 80 mm Maksimum enjeksiyon hacmi: 1.810 cm³ Iedjyak Ecopfx Acdsib Enjekte parça ağırlığı: 1.647 g/PS Kontrol ünitesi: MC6 Donanım: 2 adet çekirdek çekme Robot arayüzü 12 bölgeli sıcak yolluk kontrolü Isıtma/soğutma cihazı arayüzü

Koşul: mükemmel (kullanılmış), Üretim yılı: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: colour monitor integrated with control console The machine is equipped with a fully hydraulic clamping system and a modern MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Iedpoyugkwsfx Acdjib Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions and Weight Net weight (with control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed according to actual demand during the production cycle. Key benefits - Reduction of electricity consumption by up to 30% - Servo-driven hydraulic pump technology - World-class quality and proven industrial technology - Reduced energy losses during idle time - Lower heating of the hydraulic system - Extended service life of hydraulic components - Retrofit installation option for existing hydraulic injection moulding machines

Koşul: ikinci el, Üretim yılı: 2004, çalışma saatleri: 76.000 h, toplam yükseklik: 2.480 mm, toplam genişlik: 2.330 mm, toplam uzunluk: 9.830 mm, vida çapı: 70 mm, sıkıştırma kuvveti: 4.200 kN, silindir hacmi: 1.047 cm³, Kilit kuvveti: 4200 kN Kolon ölçüsü (y x d): 800 x 800 mm Plaka boyutu (y x d): 1270 x 1200 mm Minimum kalıp montaj yüksekliği: 380 mm Maksimum plaka aralığı: 1400 mm Açılma mesafesi: 1020 mm Vida çapı: 70 mm Vuruş hacmi: 1047 ccm Enjeksiyon basıncı: 1778 bar 2. Agrega 55, ø 22 Enjeksiyon basıncı: 1674 bar Hacim: 30 cm³ Plastikleştirme ünitesi 1 ile 2 arası mesafe: 300 mm (Huckepack düzeni / Z-konumu) Donanım Ekran dili Almanca 6x hidrolik çekirdek çekici Makine otomasyon olmadan Makine hammadde hunisi olmadan Ijdpfjyv E Ewox Acdsib Dengeleme elemanları 16x kalıp ısıtıcısı Çift bileşenli enjeksiyon makinesi Makine boyutları UxGxY: 9,83m x 2,33m x 2,48m Toplam ağırlık: 23.090 kg

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 59.000 h, sıkıştırma kuvveti: 4.200 kN, vida çapı: 60 mm, silindir hacmi: 769 cm³, enjeksiyon basıncı: 2.200 bar, toplam uzunluk: 6.830 mm, toplam genişlik: 2.330 mm, toplam yükseklik: 2.480 mm, toplam ağırlık: 23.090 kg, Kapanma kuvveti: 4200 kN Gövde ölçüsü h x v: 800 x 800 mm Plaka boyutu h x v: 1270 x 1200 mm Minimum kalıp yüksekliği: 580 mm Maksimum plaka aralığı: 1300 mm Açılma yolu: 720 mm Vida çapı: 60 mm Enjeksiyon hacmi: 769 ccm Enjeksiyon basıncı: 2200 bar Donanım Ekran dili: Almanca Hidrolik çekirdek çekme: 4x Makine, manipülatorsuz Iodoyv E Dajpfx Acdeib Makine, malzeme haznesiz Dengeleme elemanları Kalıp ısıtıcı 12x Makine boyutları U x G x Y: 6,83 m x 2,33 m x 2,48 m Toplam ağırlık: 23.090 kg

Koşul: iyi (kullanılmış), Üretim yılı: 1999, Krauss Maffei KM 420 - 2700 C1 enjeksiyon kalıplama makinesi • Üretim yılı: 1999 Teknik veriler Kapatma ünitesi • Sıkma kuvveti: 4200 kN • Maks. kalıp açma kuvveti: 250 kN • Hareketli plaka besleme kuvveti (açma): 124 kN • Hareketli plaka besleme kuvveti (kapatma): 102 kN • Kalıp montaj plakalarının boyutları (G x Y): 1270 mm x 1200 mm • Kolonlar arasındaki mesafe (G x Y): 800 mm x 800 mm • Kalıp açma stroku: 1020 mm • Min. kalıp yüksekliği: 380 mm • Maks. gün ışığı: 1400 mm • Ejektör kuvveti (ileri / geri): 95 / 48 kN Birim enjeksiyon • Vida çapı: 80 mm Iisdpfxowqd Aqe Acdob • L/D oranı: 20 • Enjeksiyon basıncı: 1829 bar • Strok hacmi: 1433 cm³ • Enjeksiyon ağırlığı (PS): 1304 g • Enjeksiyon kapasitesi: 513 cm³/s • Maks. plastikleştirme kapasitesi: 108 g/s • Nozul basıncı: 173 kN Elektrik ve hidrolik kurulum • Pompa motor gücü: 75 kW • Kurulu ısıtma gücü: 36 kW • Silindir ısıtma bölgesi sayısı: 7 • Yağ tankı kapasitesi: 1075 l Boyutlar ve ağırlık • Makine boyutları (U x G x Y): yaklaşık 7,06 m x 2,33 m x 2,51 m • Toplam makine ağırlığı: 20.500 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Year of manufacture: 2002 Machine Description The Krauss Maffei KM 420-2700 C2 is a robust and precise injection moulding machine with a high clamping force of 4200 kN, designed for processing thermoplastic materials. Equipped with a reliable hydraulic system and a precise control unit, it ensures stable and repeatable operation under demanding production conditions. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 4200 Maximum mould opening force kN 250 Moving platen force – opening kN 124 Moving platen force – closing kN 102 Platen dimensions (H × L) mm 1270 × 1200 Tie bar clearance (H × L) mm 800 × 800 Mould opening stroke mm 1020 Minimum mould height mm 380 Maximum daylight mm 1400 Ejector force (forward / backward) kN 95 / 48 Maximum mould weight kg 6700 Injection Unit Parameter Unit Value Screw diameter mm 70 L/D ratio - 20 Injection pressure bar 1829 Shot volume cm³ 1097 Shot weight (PS) g 998 Injection rate cm³/s 513 Maximum plasticising rate g/s 108 Nozzle contact force kN 173 Electrical and Hydraulic Equipment Parameter Unit Value Rated pump motor power kW 75 Installed heating power kW 36 Number of cylinder heating zones - 7 Oil tank capacity l 1075 Isdjxq Akkspfx Acdoib Dimensions and Weight Parameter Unit Value Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51 Total machine weight kg 20,500

Koşul: mükemmel (kullanılmış), Üretim yılı: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of Manufacture: 2019 Injection Unit: - Screw diameter: 70 mm - Injection weight: 980 g - Injection pressure: 1877 bar - Shot volume: 1077 ccm Clamping Unit: - Clamping force: 250 t - Tie bar distance: 630x630 mm - Platen size: 995x1050 mm - Ejector: hydraulic - Clamping unit: hydraulic Control system: MC6 - Touchscreen Additional equipment: - Very good technical condition - Operating hours: approx. h in automatic mode - Euromap 67 - Robot interface - Air valve with vacuum measurement x 1 - Air valve x 1 - Hydraulic core pull x 3 - Pneumatic core pull x 1 - Control with 16 hot runner zones - Hardened injection unit – bimetallic - Energy-efficient machine – equipped with a system of 3 variable-displacement hydraulic pumps - Parallel movements - Proportional valve on the injection unit – precise injection - Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans - Year: 2015 - 5-axis robot: 4 axes are servo-driven (electric): X, Y, Z, B; axis C - Touch control panel - Robot safety package - Robot with adapter, conveyor belt, and safety guard Isdpfx Aey Sl Dlecdjib - Purchase of the robot and conveyor belt is available at extra cost Dimensions: - Weight: 20,100 kg - Length/Width/Height: 6.50x2.20x2.30 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical test for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2012, çalışma saatleri: 49.627 h, sıkıştırma kuvveti: 3.000 kN, vida çapı: 70 mm, kontrolör üreticisi: KRAUSS MAFFEI, kontrolör modeli: MC5, Hidrolik enjeksiyon kalıplama makinesi 2012 yılında üretilmiştir. Bu Krauss Maffei 300-2000 CX, 300 tonluk bir sıkıştırma kuvvetine ve Ø 70 mm'lik bir vida çapına sahiptir. Maksimum 1000 mm kalıp açıklığına ve 630 × 630 mm bağlantı çubuğu aralığına sahiptir. Yüksek kaliteli enjeksiyon kalıplama yetenekleri elde etmek istiyorsanız, satılık Krauss Maffei 300-2000 CX makinesini düşünün. Daha fazla bilgi için bize ulaşın. • PP enjeksiyon kapasitesi: 640 g • Kalıp boyutları (min.): 320 mm • Bağlantı çubuğu aralığı: 630 × 630 mm Iodpfxey S Tq Ho Acdoib • Maksimum kalıp açıklığı: 1000 mm • Çalışma saatleri: 49,627 h

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 49.533 h, sıkıştırma kuvveti: 3.000 kN, vida çapı: 70 mm, kontrolör üreticisi: KRAUSS MAFFEI, kontrolör modeli: MC5, Hidrolik enjeksiyon kalıplama makinesi 2011 yılında üretilmiştir. Bu Krauss Maffei 300-2000 CX, 300 tonluk bir sıkıştırma kuvvetine ve Ø 70 mm'lik bir vida çapına sahiptir. Maksimum 1000 mm kalıp açıklığına ve 630 × 630 mm bağlantı çubuğu aralığına sahiptir. Yüksek kaliteli enjeksiyon kalıplama yetenekleri elde etmek istiyorsanız, satılık Krauss Maffei 300-2000 CX makinesini düşünün. Daha fazla bilgi için bize ulaşın. Iijdpfxsy S Tqae Acdob • PP enjeksiyon kapasitesi: 640 g • Minimum kalıp boyutları: 320 mm • Bağlantı çubuğu aralığı: 630 x 630 mm • Maksimum kalıp açıklığı: 1000 mm • Çalışma saatleri: 49,533 h

Koşul: iyi (kullanılmış), Üretim yılı: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Basic data • Manufacturer: Krauss Maffei • Model: KM 420-2700 C2 • Year of manufacture: 2002 • Serial number: 424227 Clamping unit • Clamping force: 4200 kN (420 tonnes) • Platen dimensions (H x V): 1270 x 1200 mm • Tie bar spacing (H x V): 800 x 800 mm • Min. mould height: 380 mm • Max. mould height: 1020 mm • Max. opening stroke: 1400 mm Injection unit • Screw diameter: 80 mm • Injection volume: 1433 cm³ Iiedjy I Tq Eepfx Acdjb • Shot weight: 1304 g (PS) • Max. injection pressure: 1829 bar • Max. temperature: 375°C Electrical and hydraulic system • Power supply: 400 V • Phases: 3~ • Frequency: 50 Hz • Total current consumption: 237 A • Protection: 250 A • Pump motor power: 75 kW • Heater power: 36 kW Dimensions and weight • Machine weight: approx. 22,000 kg • Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m

Koşul: mükemmel (kullanılmış), Üretim yılı: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Minimum mould height: 780 mm Maximum opening between platens: 1400 mm Ejector stroke: 250 mm Isdpfx Aoydbbvocdeib Ejector force (forward/back): 95.4 / 48.6 kN Maximum mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Shot volume: 1608 cm³ Shot weight PS: 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Colour dosing unit control 14 GK zones Electrical and general data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil capacity: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Koşul: ikinci el, Üretim yılı: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen driving force: Open: 105 kN Close: 95 kN Iisdpfx Ajxu Uvajcdeb Mounting platen (H x V): 1,060 x 1,095 mm Clear space (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Barrel heater control zones: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: 1/min. 285/349 Screw drive standard or stage 1: 95 PS Screw drive option or stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5-inch floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with check valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2004, çalışma saatleri: 21.000 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.250 kN, vida çapı: 40 mm, silindir hacmi: 217 cm³, enjeksiyon basıncı: 2.377 bar, ejektör stroku: 150 mm, açılma hareketi: 600 mm, toplam uzunluk: 4.480 mm, toplam genişlik: 1.510 mm, toplam yükseklik: 2.190 mm, toplam ağırlık: 6.000 kg, güç: 18,5 kW (25,15 bg), Donanım: dokümantasyon / kılavuz, Mükemmel durumda. Iodpfx Acowlhb Tedjib

Koşul: ikinci el, Üretim yılı: 2023, çalışma saatleri: 22 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61035145, sıkıştırma kuvveti: 1.200 kN, vida çapı: 35 mm, silindir hacmi: 393 cm³, enjeksiyon basıncı: 2.429 bar, enjeksiyon ağırlığı: 140 g, kalıp yüksekliği (min.): 200 mm, ejektör kuvveti: 33.000 N, ejektör stroku: 120 mm, açılma hareketi: 950 mm, montaj yüksekliği: 450 mm, toplam uzunluk: 5.650 mm, toplam genişlik: 1.820 mm, toplam yükseklik: 1.950 mm, toplam ağırlık: 6.700 kg, ısıtma kapasitesi: 15,5 kW (21,07 bg), çekiş tipi: Vollelektrisch, açık açıklık: 570 mm, alet ağırlığı: 600.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer, KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding to enable fast and innovative responses to market demands. It combines high performance, ease of use, and short delivery times. The machine can be used in a wide range of applications, e.g. in the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times with our base machine concept and a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color display and multi-touch functionality CLAMPING UNIT • Clamping force: 1200 kN • Max. mold opening force: 180 kN • Daylight (h x v): 520 x 470 mm • Mounting platen (h x v): 690 x 640 mm • Mold installation height min. - max.: 180 - 450 mm • Opening stroke: 850 mm • Max. mold opening travel: 450 mm • Ejector drive: electric • Ejector stroke: 120 mm • Ejector force fwd/back: 27 / 33 kN • Ejector speed fwd/back: 300 / 300 mm/s • Max. mold weight: 850 kg INJECTION UNIT • Screw diameter / type: 35 mm / standard • Effective L/D ratio: 22.9 • Injection pressure: 2429 bar • Stroke volume: 154 cm³ • Shot weight at max. stroke for PS: 140 g • Injection speed: 200 mm/s • Injection flow: 192 cm³/s • Screw drive / speed: 374 rpm • Plasticizing output (standard screw): 18.9 g/s • Nozzle contact force: 34 kN ELECTRICAL PARAMETERS • Connected load: 22.7 kW • Installed heating capacity: 11.5 kW • Power supply: 200 V / 50 Hz, 3 phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 6.7 t • Length x Width x Height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • 1-fold air valve (BWAP) • 1-fold pneum. hot runner closure control • 4-fold electrical interface for pneum. cascade • Euromap interface handling: E18 + E67 • Euromap interface (central computer): E67, E77 • 4-fold water manifold • Electrical pre-wiring for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) Iedpfx Aoy Rmwdjcdeib • Injection compression moulding circuit • Graphical analysis package • Injection unit swing device The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Koşul: ikinci el, Üretim yılı: 2006, çalışma saatleri: 1.609 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61008195, sıkıştırma kuvveti: 800 kN, vida çapı: 40 mm, kolonlar arası açıklık: 420 mm, silindir hacmi: 201 cm³, enjeksiyon basıncı: 2.500 bar, enjeksiyon ağırlığı: 183 g, kalıp yüksekliği (min.): 400 mm, ejektör kuvveti: 22.600 N, ejektör stroku: 150 mm, açılma hareketi: 750 mm, toplam uzunluk: 3.960 mm, toplam genişlik: 1.480 mm, toplam yükseklik: 2.020 mm, toplam ağırlık: 3.550 kg, ısıtma kapasitesi: 10,9 kW (14,82 bg), çekiş tipi: Hadraulisch, açık açıklık: 470 mm, alet ağırlığı: 1.000.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series provides a particularly compact, efficient, and flexible two-platen machine. The very compact two-platen design with a cantilevered clamp offers generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further provides a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multi-touch functionality CLAMPING UNIT - Clamping force: 800 kN - Maximum die opening force: 55 kN - Clearance between tie bars (h x v): 470 x 420 mm - Mounting platen (h x v): 670 x 670 mm - Mould height min. - max.: [on request] - Maximum opening stroke: 750 mm - Maximum mould opening path: 500 mm - Ejector drive: hydraulic - Ejector stroke: 150 mm - Ejector force forward/back: 23 / 10 kN - Ejector speed forward/back: 760 / 800 mm/s - Maximum mould weight: 1000 kg INJECTION UNIT - Screw diameter / type: 40 mm / standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: 1860 bar - Shot volume: 201 cm³ - Shot weight at max. stroke for PS: 183 g - Injection speed: 100 mm/s - Injection flow: 126 cm³/s - Screw drive / speed: 295 rpm - Plasticizing rate (standard): 12.3 g/s - Nozzle contact force: 50 kN ELECTRICAL PARAMETERS - Connected load: 15.0 kW - Installed heating capacity: 10.9 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: 3.55 t - Length x Width x Height: 3.96 x 1.48 x 2.02 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for the plasticizing cylinder - Open nozzle - One additional temperature control zone for nozzle heating - Air valve single (BWAP) - Pneumatic control for hot runner shut-off, single - Hydraulic core pull, single (BWAP) - Euromap interfaces for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression molding function - Graphic analysis package Iiedpfx Asy Rlmwecdob The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Koşul: ikinci el, Üretim yılı: 1999, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 44731, sıkıştırma kuvveti: 500 kN, vida çapı: 25 mm, kolonlar arası açıklık: 320 mm, enjeksiyon ağırlığı: 47 g, kalıp yüksekliği (min.): 200 mm, açılma hareketi: 550 mm, toplam uzunluk: 4.000 mm, toplam genişlik: 1.163 mm, toplam yükseklik: 1.787 mm, toplam ağırlık: 2.300 kg, giriş frekansı: 50 Hz, giriş voltajı: 400 V, giriş akımı: 58 A, Lütfen teklifin durumu ve içeriğini resimlerden ve videodan inceleyiniz. Tesis şu anda demonte durumdadır. Burada sunulan cihaz/sistem test edilmiş, tamamen çalışır durumda ve kullanıma hazırdır. Iisdpjx Srggefx Acdob Satış fiyatı KDV dahildir. Düzenli bir fatura alacaksınız. Yabancı müşteriler için geçerli bir vergi numarası ile net fatura da düzenlenebilir. Ara satış hakkı saklıdır. Web sitemizi ziyaret edin ve diğer tekliflerimize de göz atın. Belirtilen şirket isimleri ve ticari markalar, sahiplerinin mülkiyetindedir ve yalnızca ürünlerin tanımlanması ve açıklanmasına hizmet etmektedir. Teknik verilerdeki sapmalar ve ürün açıklamasındaki hatalar mümkündür ve bunlarda değişiklik yapma hakkı saklıdır.

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 1998, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g Iedpfx Acoy Exdljdeib EQUIPMENT Two-component system KraussMaffei Multinject system Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Koşul: iyi (kullanılmış), Üretim yılı: 2005, Sıkıştırma kuvveti: 500 t Vida çapı: 80 mm Tip: Yatay Tahrik: Hidrolik Kapatma ünitesi: Kapatma kuvveti: 500 t Açılma stroku: 1260 mm Çekme kolu mesafesi (Y×D): 900×800 mm Plaka boyutu (Y×D): 1270×1200 mm Iiedpox H Au Rsfx Acdjb Enjeksiyon ünitesi: Vidalı mil çapı: 80 mm Maks. enjeksiyon basıncı: 1829 bar Enjeksiyon hacmi: 1433 cm³ Enjeksiyon ağırlığı (PS): 1304 g Elektrik donanımı: Gerilim: 400 V / 50 Hz

Üretim yılı: 2020, Koşul: yeni, Krauss Maffei Touchpanel MC5/MC6 yedek parçaları için en son sürüm Genişlik- 37 cm Yükseklik- 47cm Uzunluk- 8cm Iiedpfoqvuicex Acdeb

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 61.300 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.200 kN, vida çapı: 35 mm, kolonlar arası açıklık: 470 mm, basınç: 2.429 bar, Here we offer, as a dealer for injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. ++++From pharmaceutical cleanroom production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine no.: 61011287 Ijdpfx Aey D Adtocdjib Year of manufacture: 2008 Operating hours: 61,300 h Control system: MC5 Technical Data – Clamping Unit Clamping force: 1,200 kN Tie bar spacing (H x V): 470 x 470 mm Platen size (H x V): 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Movable platen centering diameter: 160 mm Fixed platen centering diameter: 125 mm Max. mould weight: 1,485 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 156 cc Injection pressure: 2,429 bar Screw length: 23 L/D Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Free injection rate: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Screen language: German Screen language: English +++Extras+++ Automation: Handling device / removal robot included – Handling: LR 100-2300 Conveying technology: roller conveyor included CE marking: available Full maintenance and acceptance history Complete last test report Incl. conveyor belt incl. safety cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to initial commissioning Loading / Shipping Free loading onto buyer’s truck or free delivery (ex-works, freight at cost) Available from our warehouse in Hanover, Germany.

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 98.806 h, sıkıştırma kuvveti: 40.000 kN, vida çapı: 130 mm, enjeksiyon ağırlığı: 8.100 g, toplam uzunluk: 4.900 mm, toplam yükseklik: 4.200 mm, toplam ağırlık: 255.000 kg, 2x KraussMaffei KM 4000-19000 MC – Injection Moulding Machines – Year of Manufacture 1998 For sale are two identical injection moulding machines by KraussMaffei, model KM 4000-19000 MC, featuring the MC3F control unit. These machines are especially suited for the production of large plastic components that require exceptionally high clamping force. Iedpfx Aceyt Hy Nodjib The systems are fully equipped and include multiple peripheral devices for material feeding and process management. ## Technical Data * Manufacturer: KraussMaffei * Model: KM 4000-19000 MC * Control system: MC3F * Year of manufacture: 1998 * Machine hours: approx. 98,806 h * Clamping force: 40,000 kN * Max. shot weight: 8,100 g * Screw diameter: 130 mm ## Dimensions & Weight * Machine depth: 4,900 mm * Machine height: 4,200 mm * Machine weight: approx. 255,000 kg ## Equipment * Robot interface: KUKA KRC4 * Sequential injection controller: S.I.S.E. IS-Tech * Temperature control units: GWK * Dosing and mixing system: Motan Colormetric * Belt conveyor ## Machines * Machine No. 14 * Machine No. 15 The machines can be purchased individually or as a package. Viewing by appointment.

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 99.161 h, sıkıştırma kuvveti: 32.000 kN, vida çapı: 130 mm, enjeksiyon ağırlığı: 8.100 g, toplam uzunluk: 4.900 mm, toplam yükseklik: 4.200 mm, toplam ağırlık: 230.000 kg, A high-performance injection molding machine from German manufacturer KraussMaffei is offered for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-volume plastic components and industrial-scale manufacturing. The machine provides exceptionally high clamping force and is ideally suited for applications involving technical plastic parts or oversized components. It features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g, enabling the efficient production of large parts with significant material requirements. Additionally, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC Iiodpfx Asyt H Dhecdsb * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance Data * Clamping force: 32,000 kN * Screw diameter: 130 mm * Maximum shot weight: 8,100 g Dimensions & Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm This machine offers a robust and established solution for industrial plastic processing and is particularly appealing to manufacturers requiring large-format injection molding capabilities. Additional information, photos, or inspection appointments are available upon request.

Koşul: ikinci el, Üretim yılı: 1998, çalışma saatleri: 101.215 h, makine/araç numarası: 23J01415, sıkıştırma kuvveti: 23.000 kN, enjeksiyon ağırlığı: 6.100 g, toplam uzunluk: 4.500 mm, toplam yükseklik: 3.800 mm, toplam ağırlık: 205.000 kg, Two powerful injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, engineered for the production of large-volume plastic parts and series industrial manufacturing. Iedpfx Asyt Hidecdsib Each unit provides a clamping force of 23,000 kN and features a screw diameter of 105 mm as well as a maximum shot weight of 6,100 g, making them particularly suitable for applications requiring large components and high material throughput. Both machines come equipped with extensive peripheral technology, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and blending system. A belt conveyor is part of the scope of delivery. Manufactured in 1997 and 1998, both machines have been operated in an industrial production environment. Technical data: Machine 1 * Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) * Year of manufacture: 1998 * Operating hours: approx. 101,215 h Machine 2 * Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) * Year of manufacture: 1997 * Operating hours: approx. 99,030 h Shared technical specifications: * Clamping force: 23,000 kN * Screw diameter: 105 mm * Maximum shot weight: 6,100 g * Machine weight: approx. 205,000 kg * Machine dimensions: * Depth: approx. 4,500 mm * Height: approx. 3,800 mm These machines provide a solid and proven solution for industrial plastics processing and are especially attractive for companies requiring large-scale injection molding capacity.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 65.850 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 61013689, sıkıştırma kuvveti: 2.500 kN, vida çapı: 50 mm, kolonlar arası açıklık: 630 mm, silindir hacmi: 432 cm³, enjeksiyon basıncı: 2.304 bar, enjeksiyon ağırlığı: 393 g, Donanım: dokümantasyon / kılavuz, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machine trade. Of course, we are also interested in purchasing well-maintained, currently available used injection moulding machines, model year 2010 or newer. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Information and Advantages for Used Machines From July 1, 2025, used machinery can also benefit from a special annual depreciation of 30%. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as you would for a new machine. Keyword: Growth Booster (§ 7, paragraph 2 EStG-E) Currently in stock and tested at our Hanover warehouse: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control System: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Extras: - 2 x core pullers (movable WAP, fixed WAP) Isdpfx Aexqhuuecdeib - Pneumatic valve 1 on FWAP - Accumulator for increased injection performance - Fast SK change CX Midrange - Ejection of cooled nozzle plugs - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve for blowing out at BWAP - 12 temperature control zones - Volt-free contact BDE - Process monitoring - Cycle storage - Trend chart – target/actual graph - PV control - Active backpressure control - Single previous owner – German origin Regular maintenance by manufacturer and previous owner Clamping Unit: Clamping force: 2500 kN / 250 tons Tie-bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Max opening stroke: 820 mm Min mould height: 330 mm Max daylight: 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max / 26.3 kN return Injection Unit: Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g (PS) Injection pressure: 2304 bar Electrical Equipment: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, software included. Available immediately from our Hanover warehouse (Germany) or free delivery within Germany against reimbursement of freight costs. The machine is offered tested and operational. The machine is our sole property. The requested machine is available immediately at our Hanover warehouse, offered tested and operational, and can be inspected under power. To inform you about our machines and our company: - We only sell machines purchased from ongoing production, stored at our Hanover warehouse. - All listed machines are inspected and tested before removal. - We do NOT sell insolvency assets and we are NOT intermediaries trading third-party property. - All machines come from successful companies where regular maintenance and servicing are standard. - All machines are available for inspection at our warehouse.