Kullanılmış Stas 13.50 "Wf 87 Farmstar" satın al (9.205)

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels Bjdpfx Aoy U Syrsbzslh 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Bsdsgcw Rispfx Abzjlh Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Bljdpfx Asy Uqgdobzoh Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Bedpfx Asfakkcobzelh Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.613 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 604 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Equipment: * Chassis type: walking floor * Fifth wheel load (national, t): 12 * Coupling height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) walking floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11420 * Axles: JOST Bljdpjy I Hr Njfx Abzoh * Brake version: disc brakes * Brake type: JOST - DCA-T7 (Knorr brake) * Offset (ET): 120 * Option: 1st axle with lifting axle and traction aid * Traction aid activation via switch in the truck * Option: 3rd axle with lifting axle and Optiturn, additional lift axle control activation via Wabco SmartBoard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Lowering of air suspension via SmartBoard, as well as raise/lower valve * Control console for EBS operation on driver's left, in front of axles * Standard SmartBoard * Central air and electrical console with gantry * Support legs: aluminium quick-drop supports * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF * Chrome wheel nut caps with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 units * 2 LED reversing lights rear left and right (in direction of travel), mounted behind the axles * 2 LED reversing lights front left and right (in direction of travel), mounted near the support legs * 1 unit inside, on the front wall, left side (in direction of travel) * Lighting unit protection: one-piece splash guard * LEDs in tailgate crossmember: 2 x 3-function LED * Underrun protection * Mud flaps underrun protection, black with STAS logo * Control console position: walking floor operation left, behind the axles * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 3/4 * Hydraulic coupling type: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1 * Hydraulic return coupling gender: female * Hydraulic hose length: 3,000 mm * Hydraulic connection point: front wall * Hydraulic coupling specification: standard * Hydraulic positioning: pressure left, return right (CON) * Toolbox: plastic * Air connection in toolbox * Aluminium access ladder, 2.5 m extendable * Broom and shovel holders * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door on driver's side (left) * Side wall profile: 3 mm - 2 mm * Walking floor system brand: Cargo Floor * Floor system operation: remote control * Walking Floor System CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth overlapping, aluminium terminal plate in walking floor * Oil temperature sensor for walking floor system * Clean-out wall: aluminium with brushes * Clean-out wall storage: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall material: aluminium * Bumper: aluminium rear door bumpers * Number and position of roof bows: 2 middle bows (centrally, evenly distributed) and 1 rear bow (rear) * Curtain holders, straight type, 4 units right side wall * Catwalk/ladder * Catwalk on the front wall * Folding sign "A-Schild" * Fixed aluminium cover plate between floor and front wall

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.613 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 604 m³, toplam genişlik: 2.550 mm, Donanım: ABS, Equipment: * Chassis type: moving floor trailer * King pin load (t), national: 12 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height (mm): 240 * Total width (mm): 2550 * Volume (m³): 60.4145 * Total length (mm): 11420 * Axles: JOST * Brake version: disc brake * Brake type: JOST - DCA-T7 (Knorr-Bremse) * Offset (ET): 120 * 1st axle option: lift axle with traction aid * Activation of traction aid via switch in the truck * 3rd axle option: lift axle and Optiturn, activation of additional lift axle control via Wabco SmartBoard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension ECAS with lifting and lowering valve * Air suspension lowering via SmartBoard, as well as with lift/lower valve * Control console: EBS control on left side in direction of travel, in front of the axles * Standard SmartBoard * Central air and electrical console with support bracket * Landing gear: aluminium drop-leg supports * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF Blodpfxey I Hr Ao Abzjh * Wheel nut covers: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 pieces * 2 LED rear reversing lights mounted left and right behind the axles * 2 LED front reversing lights mounted left and right in the area of the landing gear * 1 interior light on the front wall, left in direction of travel * Lighting unit protection: one-piece splash guard * LEDs in rear door cross member: 2 x 3-function LED * Underrun protection * Mud flaps for underrun protection, black with STAS logo * Position of moving floor control console: left, behind axles * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4" * Hydraulic coupling - gender: female * Hydraulic return line coupling: rotary coupling * Hydraulic return line - size: 1" * Hydraulic return line - gender: female * Hydraulic coupling hose length: 3,000 mm * Hydraulic coupling - connection point on front wall * Hydraulic coupling - standard version * Hydraulic line positioning: pressure left, return right (CON) * Toolbox: plastic * Air connection in toolbox * Aluminium access ladder, extendable to 2.5 m * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: left side, in direction of travel * Side wall profile: 3 mm - 2 mm * Moving floor system brand: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm, smooth, overlapping, finishing strip, aluminium moving floor * Oil temperature sensor for moving floor system * Emptying wall: aluminium with brushes * Storage of emptying wall: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall: aluminium * Rear door protection: aluminium rear door buffer * Cross bar quantity and position: 2 middle bars (centrally, evenly distributed), 1 rear bar (at the back) * Tarpaulin holder: straight design, 4 pieces on right side wall * Catwalk/ladder * Catwalk on front wall * A-board, foldable

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Blodpfx Ajyh S Aijbzeh Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Bjdpfx Aofi Nmwsbzolh Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Blsdpsfi Nmpsfx Abzsh Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Blodpfx Asgcw Rmsbzoh Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, kilometre: 60 km, güç: 87 kW (118,29 bg), yakıt türü: elektrikli, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.220 mm, yakıt: elektrik, renk: beyaz, şoför kabini: gündüz kabini, vites türü: otomatik, toplam uzunluk: 6.450 mm, toplam genişlik: 2.100 mm, toplam yükseklik: 2.310 mm, izin verilen dingil yükü (dingil 1): 1.850 kg, izin verilen dingil yükü (dingil 2): 2.100 kg, Üretim yılı: 2026, Donanım: ABS, EBS (Elektronik Fren Sistemi), elektrikli ayna, elektrikli cam sistemi, hidrolik arka platform, hidrolik direksiyon, hız sabitleyici, klima, merkezi kilitleme, = Ekstra Seçenekler ve Donanım = - Isıtmalı dış aynalar - Yolcu koltuk bankı - Sürücü hava yastığı - Uzaktan kumandalı merkezi kilit - Hız sabitleyici - Yüksekliği ayarlanabilir sürücü koltuğu - Yüksekliği ayarlanabilir direksiyon - Klima - LED gündüz farları - Ön orta kol dayama - Radyo DAB MP3 Bluetooth 4.0 - Geri görüş kamerası - Yan kapı - Marş engelleyici - Ön cam ısıtması - Bölme duvarı = Diğer Bilgiler = Genel Bilgi Kapı sayısı: 2 Üretim yılı: 2026 Kabin: tek Aks Konfigürasyonu Ön aks: Maks. aks yükü: 1850 kg; Yönlendirmeli Maksimum arka aks yükü: 2100 kg Ağırlıklar Azami toplam ağırlık: 3.500 kg Fonksiyonel Yükleme platformu: D'HOLLANDIA DH-LMA.08, arka kapak, 750 kg kaldırma kapasitesi Bedpfx Abewzizyjzjlh Durum Genel durum: çok iyi Teknik durum: çok iyi Görsel durum: çok iyi

Koşul: ikinci el, azami yük ağırlığı: 32.447 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 01/2023, one previous owner Bledpfx Abezahunezsh Mileage 171,700 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox HB450 steel Front wall and side walls made of 3 mm Hardox HB450 steel Pneumatically folding rear underrun protection Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatic rear unlocking HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST heavy-duty cranked landing legs SAF axles with large 430 mm disc brakes 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability system (RSS) WABCO Smartboard Lifting and lowering device Automatic tip lowering 6x 385/55 R 22.5 tyres ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Holder for shovel and broom Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – with us, immediately available with full-service rental. -----

Koşul: ikinci el, azami yük ağırlığı: 33.910 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2025, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.737 mm, yükleme alanı hacmi: 91 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2025, Donanım: ABS, 3-Axle STAS Walking Floor Semi-Trailer 91.5 cbm NEW VEHICLE, unused First registration: 11/2025 Internal dimensions (LxWxH): 13,500 x 2,475 x 2,650/2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Fifth wheel height: 1,150 to 1,180 mm Chassis made of hot-dip galvanized steel SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with RSS anti-skid system WABCO Smartboard with axle load display 1st axle lift axle >> 3rd axle STEERING AXLE Air tanks in aluminium Tires: 6 x 385/65 R 22.5 Crank-type JOST heavy-duty landing gear ASPÖCK full LED lighting 4 x LED work lights Toolbox at rear left Side wall profile seams fully welded inside CARGOFLOOR moving floor with 21 slats, 10 mm ribbed material thickness Remote control operation Bjdpfx Abeyih R Sozslh Rear closure plate in stainless steel 3 reinforced bows, waste-spec version Reinforced Panama 900 g rolling roof tarp 12 pairs of lashing rings in the floor Cleaning door in the front wall Rear crossbeam pivotable, can be released from below – optimal for bale transport RENTING is the new BUYING – we also offer FULL-SERVICE RENTAL, available immediately.

Koşul: ikinci el, azami yük ağırlığı: 34.120 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.737 mm, yükleme alanı hacmi: 88 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, 3-axle STAS walking floor semi-trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (LxWxH): 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height: 1,200 to 1,250 mm Axle spacing: 1,310 mm Unladen weight: 7,880 kg Chassis made of hot-dip galvanized steel SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with RSS (Roll Stability Support) WABCO Smartboard with axle load indicator >>> 1st and 3rd axle are lift axles >>> WABCO OptiTurn steering system for reduced turning radius Aluminum air tanks Tyres: 6 x 385/65 R 22.5 JOST full-load crank landing gear Bedpey S Nqcofx Abzjlh ASPÖCK full-LED lighting 4 x LED work lights Tool box on the rear left Side wall profiles fully welded on the inside CARGOFLOOR moving floor with 21 slats, ribbed, 10 mm material thickness >>> With floor reinforcement for forklift operation and full-length slide bearings Control with radio remote Rear end plate in stainless steel 2 stakes, reinforced refuse version Reinforced rolling roof tarpaulin >>> Rear cross-beam is swiveling, can be operated from the ground With grain hatch in the left door leaf RENTING is the new BUYING—immediately available from us, also with FULL-SERVICE LEASING

Koşul: ikinci el, azami yük ağırlığı: 35.000 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 12.213 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 70 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.856 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle AGRICULTURAL Moving Floor Semi-Trailer 70 cbm First registration 05/2024, like new condition Internal dimensions (LxWxH): 12,213 x 2,475 x 2,300 mm Volume: approx. 70 cbm Unladen weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Overall height approx. 3,850 mm Short aluminium chassis above the axles SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version Wabco Trailer EBS with stability system RSS 1st axle LIFT AXLE 3rd axle trailing steering axle 6x 385/65 R 22.5 tyres Bljdpfxev Dz Ixe Abzjh Full-load aluminium drop support legs (2x 10 t) 4x LED work lights Cargofloor moving floor, agricultural version with 15 smooth 6 mm slats End caps welded aluminium RADIO remote control Side wall panels completely welded (grain version) Rear portal crossmember at the top is swing-mounted Hydraulic connections at the top and additional ones at the support legs lower end Roof cross beams, reinforced, galvanised Integrated grain discharge funnel at the rear, outlet facing downwards, operated from the side RENTING is the new BUYING – also available from us with full-service rental.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.000 mm, toplam uzunluk: 11.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.850 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, renk: diğer, Üretim yılı: 2020, Donanım: ABS, = Additional options and accessories = - EBS - Hydraulic system - Alloy wheels = Remarks = Number of axles: 3, Tare weight: 5,920 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, Suspension type: Air suspension, ABS, EBS, Hydraulic system, Body year of construction: 2020, Body material: Aluminium, Side wall material: Aluminium, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 37, Drum volume unit: m³, Axle type: JOST = Further information = General Information Cab: Day Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 9 mm; Tyre tread right: 4 mm Axle 2: Tyre tread left: 7 mm; Tyre tread right: 10 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 2 mm Weights Unladen weight: 5,920 kg Payload: 33,080 kg Gross Vehicle Weight (GVW): 39,000 kg Environment Emission class: Euro 0 Maintenance Bedpfxsyxbrls Abzslh APK (General Technical Inspection): valid until 08.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damages: none Financial information Leasing rate: €371 per month (default, 60 months); Please contact us for more information and conditions = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an enquiry via our website. Ask directly about our European warranty package.

Koşul: ikinci el, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2021, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.280 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.861 mm, Üretim yılı: 2021, Donanım: ABS, STAS 3 Dingilli HardoX Çelik Damper 55 m³ "AGRAR-LINER" Bsdpfx Aboy Nvrzszelh İlk Tescil: 04/2021 Kilometre: 203.910 km İç Ölçüler (UxGxY): 10.000 x 2.350/2.450 x 2.280 mm (konik yapı) Boş Ağırlık: Sadece 7.100 kg Z-Şasi, kademeli tip Taban tamamen 3 mm HardoX çelik HB450 Ön duvar ve yan duvarlar 3 mm HardoX çelik HB450 Eğimli ön duvar, içeriden tırmanışlı 1 Kanatlı ALÜMİNYUM Kombi Kapı, sallanır tipte, pnömatik son kilit açma 1 Adet TAHIL SÜRGÜSÜ Güçlendirilmiş tavan brandası HYVA tip Alpha kaldırma silindiri, yüksek ve düşük basınca uygun ALÜMINYUM tam yükleme altlığı Kasa altında 2x hava vibratörü SAF akslar, büyük disk frenler, 430 mm 1. Aks kaldırılabilir aks WABCO Trailer-EBS, kayma önleyici RSS WABCO Smartboard Kaldırma ve indirme mekanizması Lastikler 385/65 R 22.5 Alüminyum erişim merdiveni Kürek ve süpürge tutucu Sağda alet kutusu 4x LED geri vites farı KİRALAMA yeni SATIN ALMA - bizde FULL SERVİS KİRALAMA hemen mevcut-----

Koşul: ikinci el, boş ağırlık: 7.840 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2014, yükleme alanı yüksekliği: 13.500 mm, yükleme alanı hacmi: 91 m³, toplam uzunluk: 24.750 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, STAS 3-axle moving floor semi-trailer with aluminium rims, SAF axles, and disc brakes. Unladen weight: 7,840 kg. Sale exclusively to commercial customers, with all warranties excluded. Subject to errors and prior sale. Bsdpsy Txypefx Abzjlh

Koşul: ikinci el, boş ağırlık: 7.710 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2016, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 13.500 mm, yükleme alanı hacmi: 91 m³, lastik boyutu: 385/65 R 22,5, STAS walking floor trailer with aluminum rims, lift axle, disc brakes, ABS, EBS. Unladen weight: 7,710 kg. Sale exclusively to commercial customers, with any warranty excluded. Subject to errors and prior sale. Bljdpsy Txyvofx Abzoh

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Bljdefi Nmuepfx Abzeh Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Hydraulic System Tipping Cylinder with Large Casing Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Koşul: ikinci el, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made of continuous 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access ladder Deflector plates along the full length of side walls (to protect mudguards) Hydraulic rear wall flap (with pendulum function) HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO Trailer-EBS with anti-skid RSS WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Tool box on the right Bledsxriu Espfx Abzoh 4x LED reversing lights RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----

Koşul: ikinci el, azami yük ağırlığı: 27.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2025, yükleme alanı hacmi: 100 m³, Üretim yılı: 2023, Donanım: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length Silver-grey BIOSTAR – STEERING AXLE – V14900 – VERTICAL FRONT WALL – VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg Fifth wheel height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS FIFTH WHEEL HEIGHT: Accurate fifth wheel height is 1,150 mm. AXLES Tridem: Brand: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: with The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a self-steering trailing axle. CONNECTION BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: No lift axle. With traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering equipment. Aluminium air tank. STEERING AXLE LOCK: The self-steering trailing axle is locked as follows: – via the reversing lights – via a button in the truck (truck equipment not included) TYRES: 6 x 385/65 R 22.5 regional transport tyres (manufacturer’s choice) on ALCOA MATT aluminium rims. ET 120. BRAKING SYSTEM – EBS: WABCO EBS-E 2S/2M system – PREMIUM MODULATOR 2-line compressed air braking system according to CE guidelines. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING – ASPÖCK 24 Volt electrical system. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED side marker lighting mounted to the trailer. Without rear junction box – NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is mounted in the fixed aluminium under-run guard. With foldable aluminium lighting guard. 2 x 1 five-chamber rear lights – EUROPOINT III – LED version. HYDRAULIC CONNECTION: Connection at the front wall. With additional connection possibility below the body in front of the landing legs. ACCESSORIES REAR EXTENDABLE LADDER: Extendable ladder integrated at the rear of the vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminium spare wheel holder Blodpsxplxzefx Abzoh 2. BODY FRONT WALL: The front wall is made of robust aluminium plank profiles. INNER FRONT WALL TO FLOOR SEAL: Fixed seal between the floor and front wall using aluminium profile and PVC sealing. SIDE WALLS: Side walls smooth inside and out. Double-wall profiles, 600 mm wide – 30 mm thick – 3 mm inside, 2 mm outside (grain version). The side wall profiles are welded continuously on the inside. WEAR PLATE: Rectangular aluminium wear plate, inside rear, 2,000 (L) x 1,500 (H) x 4 mm. MOVING FLOOR SYSTEM: Cargo Floor CF 500 SL-C E-control. 21-board floor system. Drive segment consisting of 3 double-acting hydraulic cylinders with a stroke of 200 mm. Rear closure plate made of stainless steel. FLOOR SYSTEM CONTROL: E-control – Electric with radio remote control (original Cargo Floor). Load – stop – unload via switch. Manual emergency operation using unique red Cargo turn knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floorboards. FLOORBOARDS: 21 aluminium floor boards – 8 mm ribbed with welded aluminium end caps. REAR DOOR: 2 portal hinged...

Koşul: ikinci el, azami yük ağırlığı: 30.060 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 06/2025, yükleme alanı uzunluğu: 9.665 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 9.665 mm, yükleme alanı hacmi: 51 m³, Üretim yılı: 2024, Donanım: ABS, Last Königszapfen National 12t Fifth wheel load National 12t Axle load National 8t Axle spacing 1310-1310mm Coupling height 1150mm Chassis width 1400mm Internal height front 2165mm Internal height rear 2165mm Overall width 2550mm Wheelbase 6800mm Overall length 10656mm Chassis material Aluminum Tyres 385/65R22.5 Loading length 9665mm Axles SAF Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle with lifting axle and start-up aid Start-up aid activation via button in the truck (button installation not included in standard scope) and by pressing the brake pedal 3 times Brake lining wear indicator Not connected Tire pressure monitoring system (Tire Pilot) Not included Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lift/lower valve Air suspension lowering Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard and switch on chassis Coupling head pneumatic European palm coupling Wheel nut covers Chrome with STAS logo Landing gears Aluminum drop leg landing gears mounted at the front of the chassis, individually operated from both sides, support load 20t / per leg Underrun protection operation Manual Towing eye 1x in drive direction Splash guards underrun protection Black with STAS logo Underrun protection cover Handle on underrun protection Included EBS operating console In drive direction in front of the axles Toolbox position In drive direction left, in front of the axles, plastic Toolbox dimension - left in front of axles 860x520x500 Mudguard type Domar STAS with white line Number of splash guards on mudguard 2x Type of mudguard splash guards Clear Pass Lighting manufacturer Aspöck Lighting type ECOLED II Work lights (activated by switch) Included Position work lights (switch activation) 2x LED reversing spotlights at the front in drive direction left and right, area of landing gears Tipping cylinder manufacturer Hyva Tipping cylinder type Hydraulic cylinder with large jacket Tipping cylinder model Hyva - FC 169 Tipping cylinder stroke 7130 Tipping cylinder max. pressure 250 Cylinder stage surface treatment Standard surface treatment Hydraulic coupling Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Smartboard Bsdpfxouar Ame Abzjlh Aluminum leaning ladder 3 m Fastening of leaning ladder at rear access With hook for hanging Position broom and shovel holder With 3 holders each, at chassis on left side in drive direction Load pressure gauge Ø 100 mm - mounted front on chassis With two plastic wheel chocks including holders Safety catch chassis - body Rubber buffers Air and electrical console Centrally located in drive direction with gantry Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type Combination door Inclination of lower belt profile inside (°) 90 Floor 8 mm ALU - 110 Brinell Position rubber pads under floor crossmembers Front wall 4 mm (Alu) Side wall profile 3 mm - 2 mm in smooth finish inside and outside, double-wall profiles 600 mm wide - 30 mm thick Rear wall Alu Type of combination door 1/2 - 1/2 with swiveling upper cross tube Door wing opening Right door wing opens first (manufacturer's choice) Upper cross tube Swiveling Hinge type With double door hinge (double joint hinge) Slider Rectangular type, standard Slider position 2 sliders with operating lever, one each on left and right in drive direction Fixing of opened door wings Fixing using chains Seal rear wall With standard rubber gasket

Koşul: ikinci el, azami yük ağırlığı: 29.990 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı hacmi: 52 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2024, Donanım: ABS, Chassis Type: V-Chassis Kingpin Load National (t): 12 Axle Load National (t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1400 Loading Width (mm): 2475 Chassis Series: 090 Gross Vehicle Weight Rating (techn.): 39=12+9+9+9 t Internal Height Front (mm) (IHF): 2165 Internal Height Rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall Width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall Length (mm): 10656 Chassis: Chassis Material: Aluminium Tyre Size: 385/65R22.5 Load Length (mm): 9665 Axle Manufacturer: JOST (STAS manufacturer’s choice) Wheel Offset (ET): 120 Option 1st Axle: with lift axle and starting aid Activation of starting aid via button in truck (button installation not included in equipment scope) and by pressing brake pedal three times Option 3rd Axle: with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake Pad Wear Indicator: connected Tire Pressure Monitoring: Wabco Trailerpulse Air Suspension: ECAS with lift and lowering valve Automatic lowering of air suspension during tipping operation, can be manually locked via smartboard and switch on chassis Pneumatic Coupling Head: European palm coupling Tyre Brand: Manufacturer's choice Rims: Alcoa Dura Bright Tyre Type: Regional distance Wheel Nuts: Open Wheel Nut Caps: Chrome with STAS logo Landing Legs: Weweler as steel gear landing legs, type Weweler, with compensating feet, single-side operation, and 2 speeds Underrun Protection Operation: Manual Underrun Protection Mudflaps: Black with STAS logo, mounted across full width of underrun protection Mounting of Mudflap on Underrun Protection: Fixed Underrun Protection Cover: with covers Handle on underrun protection Control Console: EBS controls on the left in direction of travel, in front of axles Toolbox: Position: left in direction of travel, in front of axles Material: plastic Dimensions: 860x520x500 mm Bsdpfsupqi Eox Abzslh Mudguard Type: Domar STAS with white line Number of Mudflaps on Mudguard: 2 pcs Mudflap Type Mudguard: Clear Pass Lighting Manufacturer: Aspöck Lighting Type: ECOLED II Work Lights (operated via switch): 2 pcs LED reverse lights, rear, left and right in direction of travel, on the last cross beam of the chassis (controlled via reverse signal) Work Light Position (operated via switch): 2 pcs LED reverse lights front, left and right in direction of travel, mounted in the area of landing legs Tipping Cylinder Manufacturer: Hyva (STAS manufacturer’s choice) Tipping Cylinder Type: Hydraulic cylinder with large casing Tipping Cylinder Tilt Angle Normal: ±47° Tipping Cylinder Model: Hyva - FC 169 Tipping Cylinder Stroke: 7130 Tipping Cylinder Max. Pressure: 250 Cylinder Stage Surface Treatment: standard surface treatment Hydraulic Coupling: Rotary coupling Hydraulic Coupling - Size: 1 Hydraulic Coupling - Gender: Female Hydraulic Coupling - Hose: 2,500 mm Smartboard Type: Standard Air Connection: left in direction of travel, on lamp bracket Aluminum Access Ladder 3 m - mounted right in direction of travel Access Ladder Mounting for rear entry with hook Broom and Shovel Holder: 3 holders each, mounted on the chassis left in direction of travel Two plastic chocks incl. holder Locking Device Chassis-Superstructure: Rubber polyps (not for FSS 74 & 86) Air and Electrical Console: mounted right in direction of travel Body: A-plate on tipping body (not foldable) - right side Incline

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2000, toplam uzunluk: 10.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.500 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 385/65 R22,5, Üretim yılı: 2000, Donanım: ABS, = Additional options and accessories = - Leaf suspension = Further information = Tire size: 385/65 R22.5 Blodpfx Abjzam A Djzsh Axle brand: ROR Suspension: Parabolic suspension Unladen weight: 5,880 kg Payload: 32,120 kg Gross vehicle weight: 38,000 kg Tipping: Rear