Kullanılmış Stas 50 Cub Cereal satın al (40.993)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Hooglede
2.834 km
Damperli kamyon
Stas50 cub cereal
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2010, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2010, Aks konfigürasyonu
Lastik ölçüsü: 385/65 R22.5
Aks markası: Mercedes-Benz
Frenler: Disk frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 3 mm
Arka aks 2: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 5 mm
Arka aks 3: LM jantlar; Sol lastik dişi: 2 mm; Sağ lastik dişi: 4 mm
Gedpfxey Il U Ns Aagoub
Ağırlıklar
Boş ağırlık: 6.370 kg
Yük kapasitesi: 32.630 kg
Azami toplam ağırlık: 39.000 kg
Durum
Hasar: yok
Küçük ilan
Lichtenfels
2.271 km
Damperli yarı römork
STAS50 cbm HardoX Gesteinskipper, MIETEN?
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper
First registration 09/2025, condition NEW
Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width)
Unladen weight: 8,293 kg
Z-chassis, cranked design
Floor made of continuous 6 mm Hardox steel HB450
4 crusher bars evenly distributed along the entire length of the floor, fully welded
Front wall and side walls made of 5 mm Hardox steel HB450
Inclined front wall, with internal access ladder
Deflector plates along the full length of side walls (to protect mudguards)
Hydraulic rear wall flap (with pendulum function)
HYVA tipping cylinder, Alpha type, suitable for high and low pressure
ALU landing legs, full load capacity
2x air vibrators mounted under the body
SAF axles with large 430 mm disc brakes
1st axle is a lift axle with starting aid
WABCO Trailer-EBS with anti-skid RSS
WABCO Smartboard
Automatic tipping lowering system
Lifting and lowering device
Tyres: 385/65 R 22.5
Aluminium access ladder
Gusdoxriu Eepfx Aageb
Shovel and broom holder
Tool box on the right
4x LED reversing lights
RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----
Küçük ilan
Lichtenfels
2.271 km
Damperli yarı römork
STAS50 cbm HardoX, MIETEN?
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm 'X-Shape'
First registration: 10/2024
Mileage: 47,509 km
Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width)
Unladen weight only 7,275 kg
Z-chassis, cranked version
Continuous floor in 5 mm Hardox steel HB450
Front wall and side walls in 4/3 mm Hardox steel HB450
Sloped front wall, inside with access steps
2-wing portal doors, pneumatic unlocking
1 GRAIN SLIDE in right door leaf
Reinforced roof roll tarp, CENTRAL LOCKING
HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure
Full-load ALU landing legs
2x air vibrators mounted underneath the body
Gjdpfx Aaeyy Hakegeub
SAF axles with large disc brakes, 430 mm
1st axle is a LIFT AXLE with starting aid
WABCO Trailer-EBS with RSS roll stability control
WABCO Smartboard
Automatic tipping lowering system
Lifting and lowering device
Tyres: 385/65 R 22.5
ALCOA Dura-Bright high-gloss aluminium rims
Aluminium access ladder
Shovel and broom holder
Toolbox, right
4x LED reversing lights
RENTING is the new BUYING, with us also available as FULL-SERVICE RENTAL immediately

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Lichtenfels
2.271 km
Damperli yarı römork
STAS50 cbm HardoX, MIETEN?
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape"
First registration 10/2024, condition like NEW
Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body shape in width)
Unladen weight only 7,275 kg
Z-chassis, cranked design
Continuous 5 mm Hardox steel HB450 floor
Front wall and side walls 4/3 mm Hardox steel HB450
Sloped front wall, interior access ladder
2-wing portal doors, pneumatic remote unlocking
1 GRAIN SLIDE in right-hand door wing
Reinforced roof tarpaulin with CENTRAL LOCKING
HYVA tipping cylinder, Alpha type, suitable for high and low pressure
ALU landing legs, full-load type
2x pneumatic vibrators below the body
Guedeyxb E Espfx Aageb
SAF axles with large disc brakes, 430 mm
1st axle LIFT AXLE with starting aid
WABCO Trailer-EBS with RSS skid control
WABCO Smartboard
Automatic tipping lowering
Lifting and lowering mechanism
Tyres 385/65 R 22.5
ALCOA Dura-Bright high-gloss aluminium rims
Aluminium access ladder
Shovel and broom holder
Toolbox on the right
4x LED reversing lights
RENTING IS THE NEW BUYING! Now available from us with immediate FULL-SERVICE LEASING.
Küçük ilan
Lichtenfels
2.271 km
Damperli yarı römork
STAS50 cbm HardoX AGRAR, 7 to. leer, MIETEN?
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 34.928 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2024, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.280 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "AGRAR-LINER"
First registration: 16.01.2024, condition like NEW
Dimensions inside (LxWxH): 8,912 x 2,350/2,450 x 2,280 mm (tapered design)
Unladen weight only 7,072 kg
Z-chassis, cranked version
One-piece floor made of 4 mm Hardox steel HB450
Front wall and side walls made of 3 mm Hardox steel HB450
Slanted front wall, interior with access ladder
2-wing combination doors with swinging function, pneumatic secondary release
Gujdeyv T Sxepfx Aagob
2 grain chutes with 1 dust protection bag
Reinforced roof tarpaulin
HYVA tipping cylinder type Alpha, suitable for high and low pressure
Aluminium landing legs, full-load
2x air vibrators mounted beneath the body
SAF axles with large disc brakes, 430 mm
1st axle lift axle
WABCO trailer EBS with roll stability support (RSS)
WABCO Smartboard
Lift and lowering device
Tyres: 385/65 R 22.5
Aluminium access ladder
Shovel and broom holder
Tool box on the right
4x LED reversing lights
RENTING is the new BUYING – also available from us immediately with FULL-SERVICE RENTAL-----
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV 10.50 / 57m³ / GMP Transport
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2016, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 57 m³, Chassis
Made of aluminium, cranked chassis (volume version -80-100 mm). Two fully automatically welded I-section longitudinal beams with welded cross members. Tipping shaft welded into both longitudinal beams and mounted in plastic bushings for long service life. Chassis width: 1,600 mm.
Axles and Suspension
430 mm disc brakes. DCA axle assemblies, version 3x9 t with air suspension, air bellows centrally arranged to the chassis longitudinal beam. 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lifting-lowering valve.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 30-40% on steel rims, 11.75 x 22.5 ET 120, UNI wheel bolts.
King Pin
2” bolted into a 10 mm thick plate.
Landing Legs
Aluminum single-action drop legs with pin lock, 2x10 t support load.
Brake System
According to E.G. standard, two-line system Wabco, spring-actuated parking brake on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system.
Electrical System
According to StVZO regulations with 2x3 Aspöck-type three-chamber light clusters, 24-volt system with 2x7 and 1x15 pin sockets, side marker lights, 2 separate halogen reversing lamps at approx. support height, 2 spotlights as RF interior spotlights operable from inside left. All air and electrical lines are neatly routed in plastic pipes.
Tipping Body / Tipper Body Fully Welded Inside
Aluminum tipping body, side walls made from 30 mm thick plank profiles (2-3 mm) welded, 600 mm wide, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight version, rear wall as universal door, straight version with 2 half-and-half wing doors each with a grain chute, automatic pneumatic operation with separate lever, lockable, rear cross member made of ALU swivels, two hold-downs with rubber buffers on the tipper body fastened to the frame at the front wall.
Hydraulics
Hydraulic cylinder mounted on front wall, working pressure 135 bar, make: Edbro, approx. 2.5 m hydraulic hose and loose half 1”, rubber stop with spring buffer mounted behind cylinder.
Accessories
6 Parlok mudguards, complete spray flaps across full vehicle width attached to underrun protection, spare wheel holder, foldable side underrun protection right, 3 tool boxes (2x inox left, 1x right), approx. 3 m aluminium ladder, 3 aluminium swing bars (70 mm diameter) raised approx. 150 mm centrally, additional centre-mounted bar receiver for positioning a total of 2 bars to widen loading width. Rolling tarp with central light strip and separate reinforcements in high-wear areas, approx. 660 g/m2 quality, full tarpaulin system, perimeter rubber cord at rear closure with two tension hooks attached to rear swing bar. Catwalk on frame with step access left and right, tarp closure on the side with grey tension straps, rear tarp closure with welded-in rubber cord for water protection, robust foldable aluminium underrun bar with two towing eyes left and right incl. safety pins, according to EU standard. 2 "Clear Pass" spray flaps on mudguards, 1 ALU grain hopper with drawstring bag mounted on the frame, holders for shovel, broom and scraper, etc.
Godpfxsy Rwl Eo Aagoub
Tipping body with accident damage on the left side (body)
Offer and pictures non-binding.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV- OP 10.6 50m³ GMP Transport
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 47 m³, Chassis
Aluminium, cranked chassis (volume version -80 mm). Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,300 mm.
Axles and Suspension, Drum Brakes
BPW axle assemblies, drum type, 3 x 9 t with BPW air suspension; air bellows centrally arranged on the chassis longitudinal member; lift axle with starting aid and manual forced lowering; raise/lower valve; parking brake.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5, approximately 30-40% tread remaining, with steel rims 11.75 x 22.5 ET 0, UNI wheel bolts suitable for aluminium rims.
Kingpin
Gusdey Rwl Sjpfx Aagsb
2" screwed into a 10 mm thick plate.
Landing Legs
Support legs, manufacturer Jost, with 2 x 20 t load capacity; swing feet used for air suspension.
Brake System
According to E.G. standards, two-line Wabco system, spring-loaded parking brake acting on two axles, EBS-D system with Wabco aluminum air reservoir system.
Electrical System
In accordance with German Road Traffic Licensing Regulations (StVZO), with 2 five-chamber rear lights, 24 V system with 2 x 7-pole sockets, with side marker lights; 2 separate halogen reversing lights.
Tipper Body / Skip Body, Fully Welded Interior
Aluminium skip, side walls made of 30 mm thick plank profiles (2–3 mm), 600 mm wide, welded. Floor approx. 8 mm thick, high-wear-resistant alloy (5383H34/HB 110). Front wall 4 mm reinforced, straight design. Rear wall as universal door, straight design, with 2 swing doors in 2/3–1/3 split, fitted with a grain chute. ALU round profile welded to the rear doors laterally and at the bottom for sealings of door gaps. Rear doors partly smooth aluminium panelled. Universal door operated automatically/pneumatically, can be locked with a separate lever. Rear headboard made of swivel-out aluminium. Two retainer clamps with rubber buffers fixed to the skip body at front wall.
Hydraulic System
Tipping cylinder renewed in 2023. Hydraulic cylinder mounted at front wall, working pressure approx. 150 bar, manufacturer Edbro, with ca. 2.5 m hydraulic hose and 1" loose half coupling.
Accessories
6 Parlok mudguards, complete spray flaps over the entire vehicle width attached to side underrun protection, ALU spare wheel holder, foldable side underrun protection on the right. Large tool box type 860, approx. 3 m aluminium ladder, 3 swivel ALU stanchions raised by 150 mm in the middle, additionally one centrally mounted stanchion holder for positioning a total of 2 stanchions to increase loading width. Tarp with a central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, with rolling tarpaulin system. Perimeter elastic cord on the rear end of the tarpaulin, fastened with two tension hooks on the rear stanchion. Catwalk on the chassis in chassis color with access from both sides. Tarp closure at the side with tension straps, rear tarp closure with aluminium cover and rear tarpaulin with welded elastic cord against water ingress. Robust, foldable underrun protection in aluminium with towing eyes on the left. Aluminium grain funnel with sack and two wheel chocks including holders, mounted on the side of the frame, etc.
Offer and pictures subject to change.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STAS10.50 "WF 60 FarmStar" 60m³ (Vermietung möglich)
Çağrı
Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons)
Axles and Suspension
"Disc brakes 22.5"
Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors.
Tyres and Wheels
6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate.
Landing Gear
Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension.
Brake System
According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator.
Gsdofakkcopfx Aageub
Electrical System
According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside.
Body/Tipper “Fully welded interior construction”
Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left.
Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box.
Accessories
PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASOSL 9.70 "Agrolight" 50m³
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis
ALU chassis, aluminium alloy 5383H34
Two fully automatically welded T-profiles (width 200 mm)
Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit
Axles and Suspension, Disc Brakes
Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable
Gedpoxf Spfsfx Aagsub
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120
Landing Legs
Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension
Brake System
According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank
Electrical System
According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights
Tipping Body / Dump Bed
ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm
Hydraulic System
Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling
Accessories
6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side),
3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc.
Offer and images are subject to prior sale/change.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Damperli yarı römork
STASV-10.50light 50m³ 3. Achse mit Nachlauflenkung
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version
Aluminium (15-6-12)
Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm
Axles and Suspension Disc brakes 430 mm "Off Road Version"
SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable,
Tyres and Wheels
6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims
Landing Gear
Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity
Braking System
According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system
Electrical System
According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear.
Gujdpfxoxf Sn Ie Aageb
All air and electrical lines neatly installed in plastic tubing.
Tipping Body/Bin Body, fully welded interior
Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead,
Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke
Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48°
Accessories
6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc.
Offer and images non-binding.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STAS13.50 bioSTAR mit VBK E-Powerplans 93m³
Çağrı
Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis
Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg).
Axles and Suspension "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable).
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120.
Landing Legs
Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot.
Brake System
In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system.
Gusdpjyh S Aijfx Aagob
Electrical System
According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection.
Superstructure / Tipper Body "Body fully welded inside"
Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN.
Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward.
Hydraulic System "Cargo Floor" Moving Floor System
Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses.
Accessories
6 PVC mudguards with 2 anti-spray mud flaps,
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STASMF Schubboden 13.50 bioSTAR Neufahrzeug*
Çağrı
Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure.
Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request.
Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120.
King Pin: 2" bolted into a 10mm thick plate.
Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot.
Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system.
Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection.
Gjdpfx Asfi Nmwoageub
Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder.
Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses.
Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STASSchubboden 13.50 "BioStar"
Çağrı
Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g
- 10 mm floor thickness
- V-sheets 2000x1500x4
- Service door on the front wall
- 12 pairs of lashing rings in the front wall
Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design
Axle and suspension
Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment)
Tyres and wheels
6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120
Landing legs
Mechanical landing gears, 2 x 20 t support load
Brake system
Gusdpfefi Nmpox Aageb
EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear
Electrical system
According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection
Superstructure / Tipper body
Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal
Hydraulic system: 'Cargo Floor' moving floor system
Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses
Accessories:
6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc.
+590€ delivery cost
Unladen weight: approx. 7,700 kg
Offer and photos non-binding
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
STAS13.50 "WF 87 Farmstar"
Çağrı
Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis
Gusdogcw Rispfx Aagsb
Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension.
Tyres and wheels
6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg).
Landing gears
Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet.
Brake system
According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator.
Electrical system
According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside.
Body/tipper body — "Body fully welded inside"
Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead.
Hydraulic system "Cargo Floor" 24 board system — smooth version!
Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses.
Accessories
PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1
Küçük ilan
Vuren
2.731 km
Damperli kamyon
MAN18.500 TGX 25M5 ALU CEREAL OVA
Çağrı
Koşul: iyi (kullanılmış), kilometre: 374.947 km, güç: 368 kW (500,34 bg), ilk tescil: 07/2019, yakıt türü: dizel, lastik boyutu: 385/65R22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.800 mm, yakıt: dizel, renk: yeşil, şoför kabini: yataklı kabin, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, toplam uzunluk: 8.680 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.550 mm, yükleme alanı uzunluğu: 5.830 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.110 mm, Üretim yılı: 2019, Donanım: ABS, Bluetooth, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, tır çekici bağlantısı, çekiş kontrolü, = Additional Options and Accessories =
- Heated mirrors
- Digital tachograph
- Tachograph (control device)
- Fixed
- Halogen lamp
- Hydraulic system
- Manual
- Power take-off (PTO)
- Pump
- Radio/Cassette
- Sleeper cab
- Lane departure warning system
- Fabric upholstery
= Notes =
Number of axles: 2, Configuration: 4x2, Curb weight: 9,445 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 780 liters, Trailer hitch, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials locks: 1, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Beacons, Engine power: 368 kW (493 HP), Fuel type: Diesel, Euro: 6, Transmission: Automatic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Number of sides: 1 side, Pump, Central locking, Seat arrangement: 1+1, Seat material: Fabric, Seat adjustment: Manual
= More Information =
Transmission
Transmission: ZF, 12 gears, automatic
Axle configuration
Brakes: Disc brakes
Axle 1: Tire size: 385/65R22.5; Steered; Left tire tread: 14 mm; Right tire tread: 12 mm; Suspension: leaf spring
Axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tread: 13 mm; Left outer tread: 14 mm; Right inner tread: 11 mm; Right outer tread: 12 mm; Suspension: air suspension
Weights
Unladen weight: 9,445 kg
Payload: 10,055 kg
Gross vehicle weight: 19,500 kg
Functionality
Loading platform height: 153 cm
Pump: Yes
Condition
Technical condition: good
Visual condition: good
Damage: none
Number of keys: 2
Financial Information
Leasing price: €670 per month (default, 60 months); Please inquire for further information and conditions
Identification
Registration number: KLEYN1
= Company Information =
Gsdpfx Asxmrqljageub
Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offerings cover all European brands, model years, and price categories.
Why buy at Kleyn Trucks? Simple!
• Large, rapidly changing stock
• Recognizable quality
• Competitive pricing
• Correct business practices
• We speak many languages
• We understand our customers
• Support with import and transport
• (Export) registration plates arranged quickly
• Professional technical services
• Guaranteed recognizable quality
• And much more…
Please visit our website for special offers and our complete stock:
Leasing via Kleyn Trucks is possible in most European countries!
Quickly calculate your leasing rate and submit a request through our website.
Enquire directly about our European warranty package.
Küçük ilan
Korschenbroich-Glehn
2.606 km
Yürüyen tabanlı yarı römork
KNAPENSTAS 13.50 bioSTAR mit VBK E-Powerplans 93m³
Çağrı
Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis
Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg).
Axles and Suspension "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable).
Tyres and Wheels
6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120.
Landing Legs
Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot.
Brake System
Godpfx Aogcw Rmoagoub
In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system.
Electrical System
According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection.
Superstructure / Tipper Body "Body fully welded inside"
Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN.
Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward.
Hydraulic System "Cargo Floor" Moving Floor System
Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses.
Accessories
6 PVC mudguards with 2 anti-spray mud flaps,
Küçük ilan
Miechucino
2.147 km
İki şaftlı çok kanatlı A. COSTA PUMA 2/50
A. COSTAPUMA 2/50
Çağrı
Koşul: yeni gibi (kullanılmış), Çift şaftlı çok kanatlı A. COSTA PUMA 2/50 350/160
- İtalya'da üretilmiştir
TEKNİK ÖZELLİKLER
kesme genişliği 350 mm
kesme yüksekliği 160 mm
37 ve 45 kW motorlar
besleme motoru 3 kW
alt milin genişlik ayarı
bıçak çapı maks. 280 mm
mil çapı 2 x 60 mm
manşon çapı 2 x 80 mm
iz genişliği 350 mm
toplam güç 85 kW
iki besleme hızı 15 ve 22 m/dak
merkezi̇ yağlama
minimum iş parçası uzunluğu 600 mm
Guedpfxoqy E Rlj Aagjb
elektri̇kli̇ yüksekli̇k ayari
şaft yükseklik ayarı
altı üst basınç silindiri
mekanik makaralı durdurucular
dört adet fırlatma önleyici mandal
dökme demir konstrüksiyon
tıkaç çapı 2 x 220 mm
millerin dönüşü 4500 RPM
makine boyutları (uzunluk / genişlik / yükseklik) 250 / 235 / 210 cm
ağırlık ~ 5000 kg
Küçük ilan
Bremen
2.542 km
Paslanmaz çelik karıştırıcı tank 50 cbm
Çağrı
Koşul: ikinci el, 2 silindir. paslanmaz çelikten yapılmış, ayakta duran karıştırıcı tank, kullanılmış
İçerik: 50 metreküp
Sipariş numarası: 3810
Malzeme: 1.4401 ürün teması
1.4301 aksi halde
içeride kaynaklar
gıda güvenli zemin
Boyutlar:
3.000 mm i. çap
3.100 mm çap
7.000 mm silindir. Yükseklik
350 mm üst kat
500 mm alt kat
400 mm yerden yükseklik
Yaklaşık 8.250 mm toplam yükseklik
Uygulamak:
sil. çerçeve üzerinde duran
konik tabanlı
Silindirdeki pervane karıştırıcı eğimli
dahili, 12 kW, 980 d/d.
Silindir üzerinde çift ceket, 2 devre
yaklaşık 14 m2, her biri 76 litre
Guedpfx Aasv Dthwsgeb
ve alt katta 1 devre,
yaklaşık 5 m2, 90 litre
çalışma basıncı 2 bar
Yalıtım Silindirin etrafında 50 mm PU köpük,
üst kat ve çerçeve, paslanmaz çelik kapak
üretici sertifikasıyla
ve malzeme sertifikaları
Bağlantılar:
Silindirde 1 adet 340 x 440 mm'lik menhol
Üst katta sprey başlıklı Ø 300 havalandırma
Çıkış alt merkez DN 65 gelişmiş
Ağırlık: yaklaşık 6,5 ton
Küçük ilan
Madrid
3.313 km
KIESERLING çubuk doğrultma makinesi WRPF 35-50
KIESERLINGBAR STRAIGHTENER WRPF 35-50
Çağrı
Koşul: ikinci el, KIESERLING tarafından üretilen WRPF 35-50 çubuk doğrultma makinesi
Çubuk çapı: 8 - 50 mm
Hız: 50 m/dakikaya kadar
Teslimat kapsamı şunları içerir:
- Çubuk yükleme kanalı
- Giriş tahrik silindiri
- WRPF35 doğrultucu
- Çıkış tahrik silindiri
- Çubuk çıkış kanalı
- Elektrik ekipmanı (Opsiyonel: HMI kumanda paneli ile YENİ)
- Mevcut yedek parçalar
- Dokümantasyon
- Opsiyonel: Yükleme masası
- Opsiyonel: Boşaltma beşiği
Çubuk çapı: 8 - 50 mm
Gujdpfx Aoymcmrsagsb
Hız: 50 m/dakikaya kadar
Küçük ilan
Madrid
3.313 km
KIESERLING WDHF35/50/75 Çubuk Soyma Makinesi
KIESERLINGBar peeler WDHF35/50/75
Çağrı
Üretim yılı: 2025, Koşul: yenilenmiş (kullanılmış), Complete WDHF35/50/75 Peeling Line
LIKE NEW, refurbished and tested in our workshop.
Functionality and h9 tolerance are guaranteed.
Working range
Infeed diameter: 7 - 38 mm
Finished diameter: 6 - 35 mm
Minimum bar length: 2.9 m (3.2 m at maximum feed speed)
Maximum bar length: 6.5 m
Feed speed: 4 - 50 m/min, infinitely adjustable
Cutting head RPM: 675 / 1330 / 4500 rpm, infinitely adjustable
Scope of delivery
KIESERLING WDHF 35/50/75 consisting of:
- Infeed roller conveyor
- Feed rollers
- Peeling machine
- Outfeed carriage
- New outfeed pinch roll
- Outfeed channel
- Refurbishing in our workshop
- New hydraulic system
- New lubrication system
- New pneumatic system
- New electrical equipment
- Complete new set of SAAR-HARTMETALL tools and consumables
- Optional: Laser diameter control system for tool correction
Infeed diameter: 7 - 38 mm
Finished diameter: 6 - 35 mm
Minimum bar length: 2.9 m (3.2 m at maximum feed speed)
Maximum bar length: 6.5 m
Feed speed: 4 - 50 m/min, infinitely adjustable
Gedpfx Ajymb Uusagoub
Cutting head RPM: 675 / 1330 / 4500 rpm, infinitely adjustable
Küçük ilan
Madrid
3.313 km
OLIMPIA 80 Paslanmaz Çelik Boru Hattı MOD.50/60
OLIMPIA 80TIG Stainless steel welding line MOD.50/60
Çağrı
Koşul: ikinci el, OLIMPIA 80 üretimi Paslanmaz çelik kaynaklı boru üretim hattı MOD.50/60
TIG kaynak makinesi, dikiş rulosu ve orbital polisaj cihazı ile birlikte
Teknik Özellikler:
- Çap: 18 – 63,5 mm
- Et kalınlığı: 0,5 – 3 mm
Gjdpfxsymauto Aagsub
- Uzunluk: 3 – 6 m
- Hız: Maksimum 3 m/dak
Güven mührü
Werktuigen tarafından sertifikalandırılmış bayiler

Küçük ilan
Duxford
3.060 km
Pall Allegro 50 L Standart Mikser ve Tartı Platformu
PallAllegro 50 L Standard
Çağrı
Koşul: ikinci el, Dieses Angebot bezieht sich auf eine Pall Allegro 50 L Standard-Mischeinheit mit Wägeplattform.
Die Anlage befindet sich in vollständig funktionsfähigem Zustand und ist sofort verfügbar.
Die Pall Allegro 50 L Standard-Mischeinheit mit Wägeplattform ist eine robuste und vielseitige Lösung, die speziell für Single-Use-Bioprozessanwendungen in der pharmazeutischen und biotechnologischen Industrie entwickelt wurde. Sie wurde für eine gleichbleibend zuverlässige Mischleistung konstruiert und unterstützt sowohl kritische Upstream- als auch Downstream-Prozesse wie Pufferansatz, Medienvorbereitung und Formulierungsprozesse.
Diese Plattform kombiniert hochpräzise Wägetechnik mit einem zuverlässigen Mischsystem und bietet somit eine verbesserte Prozesskontrolle in einem kompakten, leicht zu reinigenden Edelstahl-Gestell. Ihre Kompatibilität mit den Pall Allegro Single-Use-Mischern gewährleistet sowohl betriebliche Flexibilität als auch Sterilitätssicherheit für unterschiedlichste Anwendungen.
Wesentliche Merkmale:
Gsdpfx Ajxl Dpdeagoub
• Integriertes Design – Vereint Mischen und Wiegen in einem kompakten System.
• Single-Use-kompatibel – Vollständig geeignet für Pall Allegro 2D-Mischbeutel.
• Hochpräzise Wägefunktion – Präzisions-Wägezellen für zuverlässige Mengenkontrolle und Chargendokumentation.
• Bedienerfreundliches Interface – Intuitives Bedienfeld mit regelbarer Mischgeschwindigkeit und anpassbaren Mischprofilen.
• Hygienische Konstruktion – Edelstahlrahmen mit glatten Oberflächen und GMP-gerechter Ausführung.
• Skalierbare Lösung – Ideal für den Pilotmaßstab bis hin zur Kleinserienproduktion.
Technische Daten:
• Modell: Allegro 50 L Standard Mixer & Wägeplattform
• Mischvolumen: Bis zu 50 Liter
• Mischtyp: Magnetgetriebener Impeller
• Plattformmaterial: Edelstahl 304
• Max. Tragkraft: Bis zu 100 kg
• Abmessungen (ca.): 600 mm x 600 mm x 1100 mm
• Stromversorgung: 100–240 V AC / 50–60 Hz
• Steuerungssystem: Integriertes Touchscreen-Bedienfeld
• Hersteller: Pall Corporation
Anwendungsgebiete:
• Biopharmazeutische Produktion – Medien- und Pufferansatz, Formulierung, Halteschritte
• Klinische Produktion – Flexible Nutzung in kleinen GMP-Betrieben
• Impfstoffherstellung – Sterile Formulierungs- und Komponentenmischung
• Gen- und Zelltherapie – Unterstützt sterile, geschlossene Systemprozesse
• Prozessentwicklungslabore – Ideal zur Skalierung von Single-Use-Technologien
Vorteile:
• Sterile Prozesse – Unterstützung von Single-Use-Beuteln minimiert Kontaminationsrisiko
• Kompakte Bauweise – Passt problemlos in Labor- und Produktionsumgebungen
• Präzise Dosierung – Integriertes Wägesystem für exakte Prozesskontrolle
• Reduzierter Reinigungsaufwand – Keine CIP/SIP dank Einweg-Mischbeuteln erforderlich
• Pall-Qualität – Entwickelt von einem führenden Anbieter im Bereich Bioprozess-Technologien.
Küçük ilan
Wijchen
2.685 km
Kumlama tesisleri Vacu-Blast Ventus 150P 1994
Vacu-BlastVentus 150P
Çağrı
Üretim yılı: 1994, Koşul: ikinci el, - Üretim yılı: 1994
- Dokümantasyon mevcut: Evet
- CE sertifikası mevcut: Hayır
- Seri numarası: 40640000
- Kontrol: Konvansiyonel
Finansal Bilgiler
KDV: Belirtilen fiyat KDV hariçtir
KDV/Farklı vergilendirme: KDV, işletmeler için indirilebilir
Teslimat ve takas, endüstriyel alandaki tüm ürünler için her zaman mümkündür
Lukas van Rossum
Gjdjwnhl Ropfx Aageub
Küçük ilan
Oebisfelde
2.389 km
CNC tezgah
Hastastar/HataburHatastar POP 50500
Çağrı
Üretim yılı: 1993, Koşul: işlem için hazır (kullanılmış), makine/araç numarası: Seriennummer: 9302394, CNC kumandalı HATASTAR 2000
500 basın kapasitesidir t veya 5000 kN
Makine aletleri yanı sıra kullanılabilir
Anahtarı dolap yaptı
X1-+ R- / X2-+ R-balta turda rehber Y1 - + Y2-balta
Üst araç hidrolik sıkma
Pnömatik sac izleme aygıtı
İkinci tow-eller operasyonu
Evrensel şüpheliler 100 x 100 x 5'100 mm
bıçak 280 x 5'100 mm
Gusdpfxod Egc Ao Aagob
Matrisler-orta plaka, b = 111 mm
Küçük ilan
Mudersbach
2.503 km
Haddelenmiş sac makinesi
OSTAS4R OHS 1570 x 150
Çağrı
Koşul: yeni, Ostas 4 Silindirli Yuvarlak Bükme Makinesi 4R OHS 1570 x 150
Hidrolik yan silindir baskısı
Guedpfsxrc Dtox Aagob
3 dijital gösterge
Hidrolik açılır yatak
Sertleştirilmiş silindirler
Konik bükme aparatı
Ayrı kumanda paneli
Silindir uzunluğu: 1570 mm
Üst silindir çapı: 150 mm
Yan silindir çapı: 130 mm
Toplam motor gücü: 4+3 kW
Ağırlık: 2470 kg
Boyutlar (mm): 3350 x 1200 x 1210 (U x G x Y)
Bükme Kapasite Bilgileri
Minimum iç çapta 6 mm (Üst silindirin 5 katı)
Minimum iç çapta 4 mm (Üst silindirin 1,5 katı)
Ön Bükme Kapasite Bilgileri
Minimum iç çapta 4 mm (Üst silindirin 5 katı)
Minimum iç çapta 3 mm (Üst silindirin 1,5 katı)
Tüm bükme kapasiteleri, 250 N/mm² akma dayanımı esas alınarak hesaplanmıştır
Malzeme (ST 37 - ST 42 yapı çeliği)
Sizin için aramayı kolaylaştırıyoruz: "stas 50 cub cereal"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+49 201 857 86 180
+49 201 857 86 180
Şimdi ilan ver
*ilan başına/ay












































































































































































































































