Kullanılmış Stas V9.70 / 46 Light 46M³ satın al (24.519)

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 46 m³, Chassis, lightweight version In aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension, disc brake 430 mm "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally aligned to the chassis longitudinal beams. 3rd axle liftable with starting aid and manual forced lowering, Smart Board Info Center, raising/lowering valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70% tread remaining, silver steel rims, 11.75x22.5 ET 120, UNI-wheel bolts Kingpin 2" – bolted into an 8 mm thick plate Landing Legs Mechanical support winds, 2-speed, 2x20t load bearing capacity, with swivel base for air suspension Brake System According to E.E.C. standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (roll stability system), Wabco Smartboard Info Center, aluminium air tank system Electrical System Compliant with StVZO regulations, with 2 five-chamber Aspöck lamps, 24V system with 2x7- and 1x15-pin sockets, featuring side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipping Body/Tipper Body “smooth design”, fully welded on the inside Aluminium tipper body, sidewalls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded; floor 6 mm thick, high-wear resistant alloy (5383H34/HB 110) with 45-degree chamfer to the sidewall; front wall 4 mm reinforced, slanted design; rear wall as universal door, straight, with two wing doors in 2/3-1/3 configuration, fitted with a grain slide; ALU round profile welded to side and bottom of rear doors to seal the door gap; rear doors partially clad smooth in aluminium; operation of the universal door is automatic-pneumatic with separate lockable lever; rear bow swing-out in ALU; two hold-down clamps with rubber buffers attached between the tipper body and the frame at the front wall Hydraulics Tipping cylinder with "Rotulen" suspension (light version). Hydraulic cylinder mounted on the front wall with an operating pressure of 150 bar, make Edbro with approx. 2.5m hydraulic hose and 1" quick coupling, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete with splash guards spanning the entire vehicle width attached to the underrun protection, without spare wheel holder ALU, collapsible side underrun protection on the right, large toolbox type 860, approx. 3 m aluminium ladder, 3 aluminium folding bows raised by approx. 150 mm centrally; additionally, one centrally mounted bow holder for positioning a total of 2 bows to increase loading width; rolling tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m2 quality with rolling tarp system; all-round elastic cord at rear closure of tarp, with two tension hooks attached to the rear swing bow; catwalk on the frame in chassis color with access steps left and right; side tarp lock with quick release closure; rear tarp closure with welded-in elastic cord for water resistance; robust foldable underrun protection in aluminium; 2 "Clear-Pass" splash guards on the mudguards as per EC standard; laterally attached to the frame is an ALU grain hopper with tarpaulin sack; holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Ijdpoyiw T Sofx Aagoar Offer and images subject to change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Isdpoyiw T Ejfx Aagsar Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding.

Durumu: yeni, Yüksek kaliteli, tanınmış Alman markası KSB'nin ETANORM SYT ETNY065-040-200 model santrifüj pompası satılıktır. Iaodpfx Aasywu Uqoger Cihaz, KSB'nin orijinal ambalajında sıfır ve depoda bekletilmiş olup, endüstriyel su tesisatları ile ısıtma ve soğutma sistemlerinde kullanım için idealdir. TEKNİK BİLGİLER Üretici: KSB Model: ETANORM SYT ETNY065-040-200 Kapasite (Q): 25,6 m³/h Basma Yüksekliği (H): 46 m Devir Hızı: 2950 d/dak Çark Çapı: 187 mm Gövde Malzemesi: EN GJS 400-15 Üretim Yılı: 2024 Flanşlı bağlantılar DURUMU Yeni, hiç kullanılmamış, depoda beklemiş Depolamadan kaynaklı minimum izler olabilir Orijinal KSB ambalajında KULLANIM ALANLARI Endüstriyel tesisatlar Su sirkülasyon pompaları HVAC sistemleri Isıtma ve soğutma tesisatları Terfi merkezleri

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Iodpoxf Spfjfx Aagjar Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brakes 430 mm "Off Road Version" Isdpfoxf Sn Ijx Aagjar SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 39.000 kg, lastik boyutu: 385/65R22.5, Donanım: ABS, 🇬🇧 MENCI SEMI-TRAILER WITH "QUADRAT" TIPPER BODY - SA850R Volume: 45.4 m³ Iaodpfxovzh T Aj Aagor Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg Gross Vehicle Weight: 39,000 kg Description, Version, and Accessories - 3rd SAF Steerable Axle with Disc Brakes Ø 430 (ET120) 2/2 - 1st Axle with Automatic Lifting Device - CRAMARO Electric Slide Cover, Hermetic Type C (2023) with Casing - Stainless Steel Toolbox 90x50x50 cm - Toolbox 9050250 - Complete ADR Kit + A and R Plates - Pressure Gauge - Electric Motovibrator Operated via Remote Control for Tailgate - PROMETEON Tyres 385/65 R22.5 - Steel Disc 385/65 R22.5 OFFSET 0/120 - Remote Control for CRAMARO Slide Cover - Additional Rear LED Spotlight - Painted Hubs - Full LED Rear Lighting - TPMS (Tire Pressure Monitoring System) - Hub Color: RED RAL 3020; Cover Color: BLUE RAL 5002; Cover with 300 mm High Bows; ADR Tarp - 3 Climbing Steps – Wear Protection Triangles Chassis: Steel, Body: Alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height control valve - Jost landing gear with curved swing base - Brake system with EBS 2S/2C and brake force regulator - Electrical system according to ADR standards - Aluminium air tanks, pneumatic quick suspension discharge device - Tipping system with 5-stage front telescopic cylinder - Pneumatic parking brake - Descent control safety valve, hydraulic system with double-acting piston and gate valve - Front ladder and removable step above mudguards, 2 towing holes, hinged underrun bar Possibility of customized financing or leasing solutions on site. From 24 up to 96 installments, including zero down payment options. Other Branches in Our Group: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) HEADQUARTERS – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS Contacts: 0823 1686306 335 6713062 Headquarters opening hours: Monday–Friday: 8:30 AM – 7:00 PM / Saturday: 8:30 AM – 2:00 PM We offer a wide selection of used multi-brand commercial/industrial vehicles: Fiat, Hyundai, Daf, Mercedes Benz, Renault, Peugeot, Iveco, Mitsubishi, Scania, S-Way, S500-V8-650-580-730-S500-S 500-S500, Stralis, Man, Nissan V8, Intarder, 770s, Limited Edition, 660 S, Semitrailers, Refrigerated Tanker, Lamberet, Schmitz, Isuzu Fixed Body, Crane, Tipper, 4-Axle, 4 Rear-Axle, Tway, T-Way-540-460 hp, Xway, X-Way, Three-Way, V8, Scania, Frost Edition Curtain Side, Box, Tail-lift, Refrigerated Cell, Insulated with Fridge, Van Domenico Truck srl declines any responsibility for discrepancies in equipment, options, and features, which may in some cases differ from what is described. We recommend checking the characteristics of the specific vehicle.

Durumu: kullanılmış, Üretim yılı: 1994, makine/araç numarası: 940114747, Stehendbogenauslage / Dikey Pres-İstifleyici Teslimat MBO SBAP 46-ME Baujahr / Yıl 1994 - Seri-No. 940114747 Arbeitsbreite mit ME max. 430mm / ME ile çalışma genişliği max. 430mm Bogenlänge / Sac uzunluğu min. 80mm Bogenlänge / Levha uzunluğu maks. 300 mm Yığın uzunluğu / Kazık uzunluğu maks. 730 mm Besleme yüksekliği min. 380mm Besleme yüksekliği maks. 950mm Pres basıncı / Basınç 20.000 N Mekanik hız / Mekanik hız maks: 30 - 160 m/dak Iasdpfsik Snwox Aagor Özdenetim Skype-Video ile Online-Video-İnspeksiyon Ziyaretinizden çok memnun oluruz - daha fazla makine stokta Hemen Kullanılabilir - İncelenebilir Stokta Emskirchen / Nürnberg - Test edilebilir

Durumu: kullanılmış, Üretim yılı: 1998, Kullanılmış Dolum Monoblok Cerma 1998 Cerma 46-MB dolum monoblok 1998 yılında üretilmiş yüksek verimli ve güvenilir bir ekipmandır. Şu anda depoda bulunmaktadır, ancak her an yeniden faaliyete geçmeye hazırdır. Bu monoblok, cam ve PET kapları sirke ile doldurmak için özel olarak tasarlanmıştır ve doğru ve tutarlı sonuçlar sağlamak için volumetrik dolum tipi ve sabit nozul kullanır. Monoblok, doldurma işleminin hızlı ve verimli olmasını sağlamaya yardımcı olan 23 valf ile donatılmıştır. Ayrıca alüminyum vidalı kapaklar için 4 adet kapatma başlığına sahiptir, bu da kapların güvenli bir şekilde kapatılmasına ve herhangi bir dökülme veya sızıntının önlenmesine yardımcı olur. Monoblokun dönüş yönü saat yönünün tersidir. Bu, sorunsuz ve kesintisiz çalışma sağlamaya yardımcı olur. Güvenlik açısından, Cerma 46-MB dolum monoblok operatörlerin güvenliğini ve ürünün bütünlüğünü sağlamak için gerekli tüm özelliklere sahiptir. Kullanıcıların ekipmanı nasıl çalıştıracaklarını ve gerekli bakımları nasıl yapacaklarını kolayca anlayabilmeleri için kılavuzlar da referans olarak mevcuttur. Genel olarak, Cerma 46-MB dolum monobloku, kaplara büyük miktarlarda sirke doldurmak isteyen tüm işletmeler için mükemmel olan yüksek kaliteli ve güvenilir bir ekipman parçasıdır. Verimli doldurma ve kapatma özellikleriyle, herhangi bir üretim hattı için değerli bir varlık olacağından emin olabilirsiniz. Toplam 4200 kg ağırlığındadır, bu nedenle uzun süre dayanacak şekilde üretilmiş sağlam ve dayanıklı bir ekipman parçasıdır. Iaodpevgupnofx Aagjr

Durumu: iyi (kullanılmış), Bükme takımı, kalıp, üst bıçak, üst takım, Rehfuss/Rehfuß takımı için abkant pres - Takım tipi: Abkant pres için Iasdpfx Aasc Sauzogor - Parçalı - Takım açısı: 82° - Ölçüler: 190 x 46 mm - Toplam uzunluk: 355 mm - Parça uzunlukları: 50/50/75/85/95 mm - Ağırlık: 14 kg

Üretim yılı: 2002, Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, besleme genişliği: 720 mm, Submitting a bid obligates you to collect the items by 31/12/2025 at the latest! The offer includes: • MBO R 700 Feeder (Serial No.: 0722420, Year: 2002) • H+H M7.35 Folding Unit (Serial No.: 1543, Year: 2002) • H+H M7.35 Folding Unit (Serial No.: 1544, Year: 2002) Iodexyhnyopfx Aagjar • H+H M7.35 Folding Unit (Serial No.: 1545, Year: 2002) • MBO SBAP-46-ME Vertical Delivery (Serial No.: 90020602, Year: 2002) • H+H 148/2 Delivery Unit (Serial No.: 820-411, Year: 2002) • Bickel SGU Die Cutter (Serial No.: 033, Year: 1997) • MBO SAP 66-ME Delivery for 3-Up Production (Serial No.: 910913362) • Polar L-1000-W-3 Pallet Lift Table (Serial No.: 6072421) TECHNICAL DETAILS Folding Pockets 1st Folding Unit: 6 folding pockets (individually driven, removable sheet transfer) 2nd Folding Unit: 6 folding pockets 3rd Folding Unit: 2 folding pockets Feed Width 1st Folding Unit: 720 mm 2nd Folding Unit: 720 mm 3rd Folding Unit: 520 mm This machine comes with one altar folding pocket (usable in folding units 1 and 2), as well as two separate sheet diverters and one auxiliary frame for setup. The 2nd and 3rd folding units are electrically height-adjustable! Note: The MBO delivery unit is defective.

Üretim yılı: 2002, Durumu: mükemmel (kullanılmış), LEVHA BESLEMELİ OFSET BASKI MAKİNESİ Iedpfx Aash Hxr Ssgear

Durumu: kullanılmış, su tankı kapasitesi: 20.350 l, V2A'dan yapılmış paslanmaz çelik kap, ayakta, şarap tankı/meyve suyu tankı Rieger - kullanılmış - Hacim yaklaşık. 20.350 litre Isdpfjwlg Hnsx Aagear Çap yaklaşık. 2.000 mm sil. Yükseklik yaklaşık. 6.000 mm Toplam yükseklik yaklaşık. 7.400 mm Dış yüzey: mermer görünümlü İç yüzey: 2B=IIIC zemin Üst Toprak: çanak şeklindeki uç 2 adet vinç gözü Dişli kaynaklı soket merkezi DN 100 ila DN 40, dişli soket DN 50, fermantasyon kilitleme vanası DN 50 ve çek vanası DN 50 Sulama halkası Tank silindiri: Çubuklu, ölçekli ve dikey boru vanalı seviye göstergesi DN 15 Menhol 420x320 mm Test musluğu DN 15 1 üstte merdiven kancası Sıcaklık göstergesi için daldırma gövde kovanı DN 40 havalandırma hattı ve DN 50 bağlantı dişine sahip aşağı doğru çekilen CIP hattı Açılı oturma vanası DN 50 ile temiz drenaj Soğutma hattı CIP topu Alt gövde: çanak şeklindeki uç açılı oturma valfi DN 50 ile öne doğru çekilmiş alt boncuk, tank duvarı ile aynı hizada kelebek vana/küresel vana/açılı oturma vanası ile ileri çekişli çıkış, flanşlı DN 50 çıkış borusu 4 adet kubbe ayak, yüksekliği ayarlanabilir, rondelalı aksi takdirde fotoğraflara göre

Durumu: kullanılmış, azami yük ağırlığı: 32.447 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, STAS 3-axle Hardox steel tipper, 86 m³ First registration: 01/2023, one owner Mileage: 188,744 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Continuous 5 mm Hardox steel HB450 floor Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically foldable rear underride guard Straight front wall, interior access ladder Rear portal doors 50:50 split, pneumatic remote unlocking Reinforced sliding roof tarpaulin HYVA tipping cylinder, Alpha type, low-pressure 2x pneumatic vibrators JOST full-load crank landing gear SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with Roll Stability Support (RSS) WABCO Smartboard Lift and lowering device Automatic tipping lowering function 6x 385/55 R 22.5 tyres ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental! Ijdpfx Aaey Dy E Uegear

Durumu: kullanılmış, azami yük ağırlığı: 32.410 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-axle Hardox steel tipper, 86 m³ First registration: 02/2024, one owner Mileage: 152,200 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Floor completely made of 5 mm Hardox steel HB450 Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable rear underrun protection Straight front wall, internal access ladder Rear portal doors 50:50 split, pneumatic unlocking Reinforced roll-over tarp HYVA tipping cylinder, type Alpha, low pressure 2x pneumatic vibrators JOST crank landing legs, full load SAF axles with large disc brakes, 430 mm 1st axle is a lift axle Iodpjy Dy Hrjfx Aagjar WABCO trailer EBS with RSS roll stability support WABCO Smartboard Lift and lowering device Automatic tipping lowering function 6-run 385/55 R 22.5 tires ALCOA Dura-Bright high-gloss aluminium rims Aluminium entry ladder Holder for shovel and broom Toolbox on the left-hand side 4x LED reversing lights RENTING is the new BUYING – immediately available from us, including full-service rental.

Durumu: kullanılmış, azami yük ağırlığı: 32.590 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 9.665 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 52 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.690 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3 Dingilli Alüminyum Damper Dorsesi 52 cbm İlk tescil 04/2024 Kilometre 152.817 km İç ölçüler (UxGxY): 9.665 x 2.475 x 2.165 mm Palet genişliği Boş ağırlık 6.410 kg 8 mm ALÜ ile tamamen kaplanmış taban, 110 Brinell sertlikte Ön duvar 4 mm ALÜ Profil yan duvarlar 3 mm - 2 mm, iç ve dış yüzeyi düz şekilde 2 kanatlı kombi kapı, sallanabilir özellikte, pnömatik son kilitleme 2 adet TAHIL SÜRÜCÜSÜ, 1x toz koruma torbalı Tavan brandası güçlendirilmiş HYVA Alfa model damper silindiri, yüksek ve düşük basınç için uygun Kranklı tam yük destek ayakları SAF akslar, büyük disk frenli, 430 mm 1. dingil KALDIRMA DİNGİLİ WABCO Treyler-EBS, kayma önleyici RSS’li WABCO Smartboard kaldırma ve indirme tertibatı Lastikler 385/65 R 22.5 Alüminyum çıkış merdiveni Kürek ve fırça tutucu Sağ tarafta alet kutusu 4x LED geri vites farı KİRALIK artık yeni SATIN ALMA – bizde FULL SERVİS KİRALIK seçeneğiyle hemen hazır. Iedpfjy Dy Hfox Aagjar

Durumu: iyi (kullanılmış), Orijinal Heidelberg GT 34×46 Otomatik Kesim Makinesi Bu makine; kesme, gofre, perforaj ve isteğe bağlı olarak baskı yapabilmektedir. Mükemmel durumda, yakın zamanda bakımdan geçmiştir. Tamamen orijinaldir, herhangi bir modifikasyon yapılmamıştır. Makine formatı: 34x46cm Baskı gücü: 60 ton Kağıt ağırlığı: 600gsm Çalışma hızı: 4000 tabaka/saat Ağırlık: 2300kg Isdpfxeywdr So Aagoar Tam donanımlı, çerçeve ve yedek parçalar dahil, baskı merdaneleri yok. Piyasada çok nadir bulunan bir makinedir.

Durumu: mükemmel (kullanılmış), Üretim yılı: 2004, çalışma saatleri: 114.000 h, toplam ağırlık: 4.400 kg, güç: 250 kW (339,91 bg), hacim debisi: 2,802 m³/saat, çalışma basıncı: 10 bar, Düzenli bakımları yapılmış, mükemmel durumda. Atlas Copco ZR250 vidalı kompresör, 10bar 46m3/dak Yağsız, su soğutmalı. Adsorpsiyon kurutuculu MD600 Kompresör: Üretici: Atlas Copco Tip: ZR 250 Yapım yılı: 2004 Yüklü çalışma saati 114.000 Maks. çalışma basıncı: 10bar Tek kademeli tahrik Soğutma suyu tüketimi: 3,7 litre/s Hava dağıtımı: 43,6 m3/dak Su soğutmalı Yağsız Çıkış: 250 kW Şebeke gerilimi: 400 V 50 Hz 445 A Son servis: Eylül 2023 Adsorpsiyon kurutucu, su soğutmalı Üretici: Atlas Copco Tip: MD 600 W Üretim yılı: 2004 Maks. Çalışma basıncı: 10,5 bar Boş hacim: 350 litre Iaodporp D Uxefx Aagsr Makine boyutları: Uzunluk: 3000 mm Genişlik: 1600 mm Yükseklik: 2000 mm Ağırlık: 4400 kg

Durumu: yeni, toplam genişlik: 600 mm, toplam yükseklik: 2.000 mm, toplam uzunluk: 2.000 mm, raf uzunluğu: 1.850 mm, Mega-M FORTIS LIGHT Warehouse Shelf – new. The Mega-M FORTIS shelf is made from high-quality powder-coated steel and features a solid, durable construction. It consists of a sturdy frame, steel crossbars, and shelves with additional reinforcements, all of which ensure long service life and high load capacity. The rack is quick and easy to assemble or reconfigure to your needs, maintaining its versatility over time. The metal shelf can store bulky items weighing up to 200 kg per shelf. It is suitable for storing warehouse containers, workshop accessories, production materials, tools, preserves, and seasonal products. This modular rack is ideal for both industrial and domestic use. Its wide range of applications makes it suitable for deployment in warehouses, shops, wholesale outlets, workshops, offices, archives, garages, basements, and pantries. The Fortis Light shelves ensure easy access to products stored on the shelves. Offer includes the following rack models: Article No.: MPP000890 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €135.00 per set (net). Article No.: MPP000891 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €118.00 per set (net). Article No.: MPP000901 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Isdoyfgdrepfx Aagear Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €158.00 per set (net). Article No.: MPP000902 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €140.00 per set (net). Article No.: MPP000903 Shelf load capacity (kg): 200 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €29.00 per set (net). Article No.: MTP003781 Rack height (cm): 200 Rack depth (cm): 60 Net price: €25.00 per set (net). * For larger orders, prices are negotiable. * Delivery available throughout Europe. * Location: 39-442 Chmielów, Poland.

Durumu: kullanılmış, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm 'X-Shape' First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous floor in 5 mm Hardox steel HB450 Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, inside with access steps 2-wing portal doors, pneumatic unlocking 1 GRAIN SLIDE in right door leaf Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load ALU landing legs 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer-EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Ijdpfoyy Hakox Aagoar Toolbox, right 4x LED reversing lights RENTING is the new BUYING, with us also available as FULL-SERVICE RENTAL immediately

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2025, çift taraflı geniş planya Maksimum planya genişliği 400 mm Maksimum planya yüksekliği 200 mm Ağır Kardan ileri vuruş Besleme bandı (sivri profil) özellikle eğri veya bükülmüş ahşaplarda hassas birleştirmeye olanak sağlar. Elektronik yükseklik ayarı Üst ve altta spiral bıçak şaftları En son IE-3 motorları Frenli motorlar ve ileri vuruş Iedpfx Asy Dpmusagear Avrupa Birliği

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.355 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 608 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load rating (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: Disc brake * Offset (ET): 120 * Option: 1st axle with lift axle and starting aid * Activation of starting aid via push button in truck (installation of push button not included in standard equipment) and by pressing brake pedal three times * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping operation, manual override possible via Smartboard and switch on chassis * Pneumatic coupling head: European palm coupling * Operating console: EBS control positioned on the left in driving direction, in front of the axles * Standard Smartboard * Landing gears: Weweler * Tire size: 385/65R22.5 Ijdpfjy Dmv Hex Aagsar * Tire pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura-Bright * Tire type: Regional application * TPMS sensor type: rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Work lamp position (switch-operated): 2x LED reverse lamps, rear, left and right in driving direction, mounted on lamp bracket * Work lamp position (switch-operated): 2x LED reverse lamps, front, left and right in driving direction, mounted near landing gears * LEDs in door rear crossbeam: 2 x 3-function LED * Underrun protection operation: manual * Mud flap underrun protection: Black with STAS logo * Cylinder tipping angle: normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Tipping cylinder max pressure: 250 * Cylinder stage surface finish: Standard * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white line * Mud flap type: Clear Pass * Toolbox: 860x520x500 * Air connection: left in driving direction, mounted on lamp carrier * Aluminium ladder: 3 m * Two plastic chocks * Chassis-to-body catch device: Rubber stops Superstructure: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Internal floor crossmember profile angle (°): 90 * Front wall: 4 mm (alu) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor crossmembers * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door header crossbeam * Door header crossbeam: pivoting version * Slider position: 2 pieces, left + right * Additional rear wall locking: double-acting pneumatic * Operation of additional locking: automatic during unloading process, additional manual operation via control on the side of the instrument panel * Number and position of roof bows: 3 central roof bows (central, evenly distributed) and 1 rear roof bow (at the rear) * Roof bow hinge type position: right

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Specification: * Chassis material: Aluminium * Chassis type: V-chassis * Fifth wheel load (National): 12 t * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm): 2165 * Internal height rear (mm): 2165 * Load length (mm): 8880 * KC value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles * Offset (ET): 120 * Option: First axle with lift axle and starting aid * Option: Third axle with lift axle and Optiturn * Activation of the additional lift axle via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping operation, can be locked manually via Smartboard or chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS control on the left side in direction of travel, in front of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox landing gears, with compensation feet, single-side operation and 2 speed settings * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Alcoa Dura Bright rims * Tire type: Regional operation * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome wheel nut caps with STAS logo * Working spotlight position (activated by switch): 2 LED reversing lights, rear left and right on the lamp bracket * Working spotlight position (activated by switch): 2 LED reversing lights, front left and right mounted by the landing gears * LEDs in rear cross member: 2 x 3-function LED * Underrun protection, manual operation * Tow eyes, 2 left and right * Mudfl aps underrun protection, black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Stroke tipping cylinder: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: Standard * Hydraulic coupling: Rotating coupling * Hydraulic coupling – size: 1 * Hydraulic coupling – type: Female * Hydraulic hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudflaps on mudguard: 2 * Mudflap type on mudguard: Asphalt Iajdpfx Ajy Dmvmsager * Toolbox: 860x520x500 * Aluminium access ladder, 3 m, right side in direction of travel * Broom and shovel holder * Ferry hooks * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retaining device chassis–body: Rubber polyps Bodywork: * Front wall slope (°): 20 * Rear wall slope (°): 90 * Inner lower belt profile slope (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm – 2 mm * Floor: 8 mm aluminium – 110 Brinell * Rubber pads under floor cross members * Rear wall type: Combination door * Combination door type: 2/3 – 1/3 with pivoting door cross member * Door wing opening: right wing opens first * Door cross member: pivoting version * Hinge type: double door hinge * Slide: rectangular design * Slide position: 1 central * Grain outlet/dust sack: 1 grain funnel incl. dust sack * Smooth rear wall surface * Door wing fixing when open: chain

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 476 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-frame * Fifth wheel kingpin load (t): 12 (National specification) * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and start assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Operating console: EBS controls on the left in direction of travel, in front of the axles * Standard smartboard * Air and electrical console on the right in direction of travel * Support winches: Weweler steel gearbox support winches, type Weweler, with compensating feet, single-sided operation, and 2 speed levels * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional haul * TPMS sensor type: rim-mounted sensor * TPMS sensor * Chrome wheel nut caps with STAS logo * Work light position (operated by switch): 2 LED reversing lights at the rear, left and right in direction of travel, mounted on the lamp bracket * Work light position (operated by switch): 2 LED reversing lights at the front, left and right in direction of travel, mounted at the support winches * LEDs in door end crossbeam: 2 x 3-function LED * Underrun protection: manual operation * Towing eyes: 2 pcs left and right * Mudflaps underrun protection, black with STAS logo * Cylinder tipping angle, standard: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: standard surface * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudguard flaps: 2 pcs * Mudguard flap type: Asphalt * Toolbox: 860x520x500 * Aluminium access ladder 3 m - right side in direction of travel * Broom and shovel holder * Ferry hooks * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Catch device chassis - body rubber buffer Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Lower belt profile inside angle (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted underneath floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with pivoting door end crossbeam * Door leaf opening: right side opens first * Door end crossbeam in pivoting design Ijdpfxoy Dmvaj Aagsar * Hinge type: double door hinge * Slide: rectangular design * Slide position: 1 pc, centered * Grain outlet / Dust sack: 1 grain funnel incl. dust sack * Smooth surface rear wall * Open door leaf secured by chain * Rear wall sealing with standard rubber gasket * Extra alu round profile

Durumu: yeni, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.641 mm, yükleme alanı hacmi: 906 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Equipment: * Chassis material: steel * Chassis type: moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor semi-trailer (mm): 7850 * Internal height front (mm): 2641 * Internal height rear (mm): 2778 * Loading length (mm): 13513 * Neck height chassis (mm): 217 * Overall width (mm): 2550 * Volume (m³): 90.6183 * Overall length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Traction aid activation via button in truck (button not included in delivery) or by pressing brake pedal three times * Option: 3rd axle with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via smartboard as well as via lift/lower valve * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side, behind axles * Standard smartboard * Air and electrical console centrally with support bracket * Landing gear: Weweler Iedpfx Aajy Dmu Nogear * As steel gearbox landing gear, type Weweler, with compensation feet, single-sided operation and 2 speed stages * Landing gear crank handle position: external * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: wheel-mounted sensor * Wheel nut caps: black PVC with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 LED reversing lights, mounted at rear left and right on lamp bracket * Work light position (switch operated): 2 LED reversing lights at front left and right, mounted in area of landing gear * Lighting unit protection: one-piece mudguard * LEDs in door header cross member: 2 x 3-function LED * Operation: fixed underrun bar * Spray flaps underrun bar: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4" * Hydraulic coupling - gender: female * Hydraulic return rotary coupling * Hydraulic return coupling - size: 1" * Hydraulic return coupling - gender: female * Hydraulic coupling - hose: 3,000 mm * Hydraulic coupling position: connection possible at front bulkhead (additional connection at landing legs) * Hydraulic positioning: pressure back left, return right (CON) * Number of mudguard spray flaps: 2 * Toolbox * Air connection mounted laterally on fittings carrier * Aluminium access ladder: 3.80 m, right-hand side * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Sidewall profile: 3 mm - 2 mm * Moving floor system make: Cargo Floor * Floor system operation: remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Emptying partition: aluminium * Emptying partition mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door version: wing door, split 1/2 to 1/2, with door closing cross member

Durumu: kullanılmış, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body shape in width) Unladen weight only 7,275 kg Z-chassis, cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls 4/3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing portal doors, pneumatic remote unlocking 1 GRAIN SLIDE in right-hand door wing Isdpfxoyxb E Ej Aagsar Reinforced roof tarpaulin with CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full-load type 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with starting aid WABCO Trailer-EBS with RSS skid control WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tyres 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING IS THE NEW BUYING! Now available from us with immediate FULL-SERVICE LEASING.