Kullanılmış Winter Kantomax Basic Fü+Ek satın al (17.986)

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min./Max. edge thickness: 0.4 - 2 mm - Min./Max. edge height: 15 - 55 mm - Min./Max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Operator panel (touch panel) at machine infeed, at eye level - Chain feed Kdjdovz E Tmopfx Ac Dol - Support plate for PVC and ABS edge band rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compression - Centrally adjustable top pressure - glue pot Teflon-coated for hot-melt granulate, capacity 3 kg - Application of glue to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Joint trimming unit with 2 HM jointing cutterheads for pre-trimming before gluing, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel preheating - Pre-trimming from the roll - 3 solid steel pressure rollers - Flush and radius milling units, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (contour trimming), top and bottom, for flush trimming and corner rounding of PVC edges, motor 0.55 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, adjustable tilt and height - Spray nozzle system (cleaning fluid) - Total power consumption: 8.0 kW / 400 V - Extraction ports: 4 x Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK - Min./max. edge thickness: 0.4 - 2 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8, 12, 16 m/min - Control panel at the machine infeed at eye level - Chain feed Kdedovz E Scspfx Ac Dol - Support plate for PVC and ABS edge banding material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers to consolidate the glue joint - Central adjustable top pressure - Glue pot with Teflon coating for hot-melt granulate adhesive - Glue application to the workpiece by means of glue roller - Electronic temperature control, operating temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA pre-milling cutter heads for edge preparation before gluing, vertical spindle adjustment, horizontal electro-pneumatic control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x with, 1 x against feed) - End cutting unit for front and rear edge overhang; high-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cutting for high precision - Flush and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (corner copying) top and bottom for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit for polishing the edges top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, adjustable angle and height - Total power consumption: 8.0 kW / 400 V - Extraction connection Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (Length/Width/Height): 3200x780x1500 mm Weight: 800 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ - Min. / Max. edge thickness: 0.4 - 3 mm - Min. / Max. edge height: 15 - 48 mm - Min. / Max. workpiece height: 10 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel positioned at operator eye level at machine infeed - Chain feed system - Support plate for PVC and ABS edge banding - Pressure zone with pneumatically operated main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable upper pressure - Teflon-coated glue pot for hot-melt adhesive granules - Glue application to workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming unit Kdodpfsvz E Evox Ac Dol - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for preparing edges before the gluing unit, vertical spindle adjustment, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one clockwise, one counterclockwise) - End trimming unit for front and rear edge overhang. High-precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull-cut for high accuracy - Flush and radius trimming unit, top and bottom, with vertical and horizontal sensing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraping unit with edge sensing from top, bottom, and side for radiusing pre-milled PVC edges. - Buffing unit for finishing edge surfaces, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tilt- and height-adjustable - Total connected load: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise protection enclosure with inspection window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (Length/Width/Height): 2650 x 640 x 1400 mm Weight: 700 kg Total Power Requirement: 5 kW Edge Bander KANTOMAX BASIC Kdodpevz E T Hefx Ac Del - Min. / Max. Edge Thickness: 0.4 – 3 mm - Min. / Max. Edge Height: 15 – 55 mm - Min. / Max. Workpiece Height: 10 – 50 mm - Min. Workpiece Width: 80 mm - Min. Workpiece Length: 100 mm - Feed Motor: 1.1 kW - Feed Speed: 12 m/min - Operator panel at machine infeed, positioned at eye level - Chain feed - Support plate for PVC and ABS edging tapes - Pressure zone with pneumatically driven main pressure roller and follow-up rollers, ensuring optimal glue joint compression - Centrally adjustable top pressure - Glue pot Teflon coated for hot melt glue granules - Glue application to workpiece via glue roller - Electronic temperature control system, working temperature 180 – 200 °C - Pneumatic guillotine for precise cutting - Pneumatic cylinder for workpiece spacing - End trimming unit for front and rear edge overhangs, featuring high-precision linear guides, motors: 0.5 kW, 200 Hz, 12,000 rpm, pull-cut for maximum accuracy - Flush trimming and radius trimming units on top and bottom, with vertical and horizontal tracing, each with 0.5 kW motors, 200 Hz, 12,000 rpm - Radius scraper unit, tracing from above, below, and side, for rounding pre-milled PVC edges - Buffing unit for finishing top and bottom edges, each with 0.18 kW motors, 50 Hz, 1400 rpm, height-adjustable - Total power consumption: 5.0 kW / 400 V - Extraction socket, diameter 100 mm - Extendable workpiece support - Noise protection enclosure with window - Compressed air connection: 6 bar - Dimensions: L=2650 mm, W=640 mm, H=1400 mm - Weight: 700 kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 1820x585x1450 mm Weight: 500 kg Total power requirement: 4 kW Edge Banding Machine KANTOMAX EASY - Min./max. edge thickness: 0.4 - 3 mm - Min./max. edge height: 15 - 48 mm - Min./max. workpiece height: 12 - 45 mm - Min. workpiece width: 80 mm - Min. workpiece length: 120 mm - Feed motor: 1.1 kW - Feed speed: 8 m/min - Control panel at machine infeed at eye level - Chain feed system - Support plate for PVC and ABS edging - Pressure zone with pneumatically-driven main pressure roller and following pressure rollers for adhesive joint compaction - Centrally adjustable top pressure - Glue pot Teflon-coated for hot-melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit Kdedsvz Hd Hspfx Ac Del - Pneumatic cylinder for workpiece spacing - End trimming saw unit for front and rear edge overhang, high-precision linear guide, 0.5 kW motor, 200 Hz, 12,000 rpm, pull-cut for high accuracy - Flush-trimming and radius trimming unit top and bottom with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Buffing unit for edge finishing top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm - Total power consumption 4.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Noise protection enclosure with viewing window - Compressed air connection 6 bar - Dimensions: L=1820, W=585, H=1450 mm - Weight: 500 kg

Koşul: iyi (kullanılmış), İstifleme kutuları, istifleme kutuları, plastik kutular, Euro istifleme kutuları, taşıma sepeti, istifleme sepeti, Euro istifleme konteynerleri, Euro istifleme konteynerleri, küçük yük taşıyıcılar, saklama kutuları, raf kutuları -6620x Saklama kutuları: çeşitli boyutlarda -771x Depolama kutularının boyutları: 550/174/H110 mm -3483x Depolama kutuları boyutları: 175/135/H110 mm -2112 saklama kutusu boyutları: 275/175/H110 mm -30x saklama kutusu Boyutlar: 138/86/H110 mm -172x saklama kutusu Boyutlar: 174/136/H96 mm -56x saklama kutusu Boyutlar: 274/174/H96 mm Kdjdsdqc Hwspfx Ac Djl -Satış: sadece eksiksiz

Üretim yılı: 2006, Koşul: ikinci el, - Kesme yüksekliği (mm): 200 Ksdpfjm E Uf Aex Ac Dsdl - Kesme genişliği (mm:) 200

Koşul: işlem için hazır (kullanılmış), Yenilenmiş - 2008 UV - tam veya noktasal Kdodpjxhfwusfx Ac Del TG Color sistemi

Koşul: yeni, Üretim yılı: 2025, konteyner uzunluğu: 20 fit, 🚢 20ft Storage Container – As New (Year of Manufacture 2025 / 2026) – Available Immediately! High-quality shipping container in nearly new condition – ideal for use as storage space, workshop, site container, or for professional transport. ⭐ Your Advantages at a Glance 🆕 Year of manufacture 2025 / 2026 – as new 💪 Very robust steel construction (2 mm wall thickness) 🌧️ Wind and watertight 🔐 Securely lockable with 4-way door locking system 🚚 CSC Plate included – suitable for international transport 🌬️ Ventilation to prevent moisture 🪵 High-quality wooden floor 🛠️ Forklift pockets integrated in the base 📏 Dimensions & Technical Data 📐 External dimensions: 6,058 × 2,438 × 2,591 mm 📦 Internal dimensions: 5,898 × 2,350 × 2,390 mm 🚪 Door opening: 2,343 mm 🧱 Volume: approx. 33 m³ ⚖️ Tare weight: approx. 2.25 t Kjdpfjwut Nbex Ac Dodl 🏋️ Payload: up to 30 t These containers impress with their durability, safety, and versatility – ideal for commercial, construction site, industrial, or demanding private use. 📬 Enquire now – we will prepare an individual offer for you! 👀 Other container sizes and variants available.

Koşul: mükemmel (kullanılmış), Catalogue number: 6393 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm - Number of spindles: 4: 1) Bottom horizontal 200 mm 5.5 kW 2) Right vertical 150 mm 4 kW Ksdpfx Acjy Ti R Es Djdl 3) Left vertical 150 mm 4 kW 4) Top horizontal 200 mm 5.5 kW - All heads adjustable up/down and left/right - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From the top: - 6 toothed feed rollers (including 2 double rollers) - 1 rubber outfeed roller From the bottom: - 1 toothed feed roller infeed, adjustable, in lower table - 3 lateral pressure elements - 1 smooth metal outfeed roller - All rollers pneumatically loaded - Infeed table length: 2130 mm - Table adjustable up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed by Cardan shafts - Machine fully enclosed in cabinet - Extraction ports: 4 x 130 mm - Dimensions (L x W x H): 3550 x 1750 x 1800 mm - Weight: approx. 3000 kg ADVANTAGES – 4-head construction – Ideal for wet and dry wood – Complete technical documentation (DTR) – Used machine, in very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at 4.2 PLN/EUR (subject to change in case of significant exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), Parça numarası 7807 TEKNİK BİLGİLER - Palet genişliği: 350 mm - Kesme genişliği: 350 mm - Testere bıçağı çapı: 355–505 mm - Kesme yüksekliği: 10–170 mm - Mili çapı: 80 mm - Tabla ölçüleri: 1900x790 mm - Tablaya kadar yükseklik: 830 mm Üst kısımda - 2 sıra tırnak/geri çevirici - 2 adet kayar, düz metal makaralar - Testereli mil - 2 adet baskı kayar makaralar Alt kısımda - Kılavuz şerit - Tırnak/geri çevirici aparat - Palet - Kasa yüksekliği elektrikli ayar - Merkezi yağlama - İnvertörde kademesiz hız ayarı - İlerleme motoru: 4 kW Kodoy R Dkzopfx Ac Dedl - Ana motor: 75 kW - Emme borusu çapı: 2x150 mm - Toplam ölçüler (U/G/Y): 2050x1800x1800 mm - Ağırlık: yaklaşık 3500 kg AVANTAJLAR – Alman üretimi – DTR dokümantasyonu mevcut – Kullanılmış çoklu testere makinesi – Çok iyi durumda Net fiyat: 58.900 PLN Net fiyat: 14.000 EUR (4,2 EUR kuru baz alınmıştır) (Fiyatlar kur dalgalanmasına göre değişebilir)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Minimum material length: 270 mm - Maximum material length: unlimited - Maximum feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from the control panel - Cutting speed: 24 m/min - Spindle moulder motor power: 2 x 4 kW - Spindle moulder rotation speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Driven infeed roller conveyor, length: 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction port diameter: 150 mm - Dimensions (L x W x H): 2,550 x 1,200 x 1,400 mm Kedpfoy Rzcujx Ac Dodl - Weight: 1,100 kg ADVANTAGES - German-made - DTR technical documentation - Tongue and groove profiling machine - Complete set of cutters and heads included - Driven infeed roller conveyor - Unpainted - Used machine, very good condition Net price: 107,900 PLN Net price: 25,690 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200mm - Maximum workpiece height: 150mm Number of spindles: 4: 1) Bottom horizontal, 200mm, 5.5kW 2) Right vertical, 150mm, 4kW 3) Left vertical, 150mm, 4kW 4) Top horizontal, 200mm, 5.5kW - All heads adjustable vertically and horizontally - Spindle diameter: 40mm - Spindle speed: 6000 rpm From above: Kdsdpfxey Ry Ivj Ac Dsl - 6 feed-in driven, toothed rollers (including 2 double) - 1 feed-out driven, dual rubber roller From below: - Driven, toothed, pivoting feed-in roller integrated into lower table - 3 lateral pressure devices - Smooth, metal feed-out driven roller - All rollers pneumatically pressed - Infeed table length: 2130mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Raising/lowering motor: 1.1kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Cardan shafts - Enclosed in safety cabin - Extraction port diameters: 4 x 130mm - Dimensions (L/W/H): 3650 x 1750 x 1800mm - Weight: approx. 3000kg ADVANTAGES – 4 heads – Ideal for wet and dry timber – Full technical documentation (DTR) – Used machine, very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Koşul: iyi (kullanılmış), Karl Tranklein EK-100 Köşe Kesme Makinası Almanya'da üretilmiştir. Çok iyi durumda. Bu, profesyonel kullanım için üretim sınıfı bir köşe yuvarlama makinasıdır. Sağlam dökme demir gövdesi ve güçlü baskı mekanizması sayesinde hassas ve güvenilir çalışma sunar. Kdodpfx Aey Ehmiec Dol Değiştirilebilir bıçaklar. Ayarlanabilir kenar payı. Bir set bıçak dahildir. İstif yüksekliği: 100 mm Ağırlık: 130 kg Dakikada çevrim sayısı: 50 çevrim/dakika Güç kaynağı: 400V Atıklar toplama kaplarında biriktirilir. Halen üretilmekte olan modeldir.

Koşul: ikinci el, toplam ağırlık: 1.780 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 11/2022, yükleme alanı uzunluğu: 4.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, Üretim yılı: 2022, Soğutulmuş ürünler için satış römorku, sirkülasyonlu havalı soğutmalı satış tezgahı. Tezgah iç ölçüsü: 4.290 x 800 mm. Su ısıtıcısı, lavabo, çanta rafı, alt dolaplar, sigorta kutusu, 220 V prizler ve daha fazlası ile donatılmıştır. Kodpfoxy Dmrjx Ac Dodl Hatalar ve ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 1.500 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2020, bir sonraki muayene (TÜV): 07/2027, toplam genişlik: 2.210 mm, Üretim yılı: 2020, Brenderup tekne römorku Teknik özellikler: - Azami toplam ağırlık: 2000 kg - Boş ağırlık: 500 kg - Taşıma kapasitesi: 1500 kg - Uzunluk: 7,0 m - Genişlik: 2,21 m - Lastik: 13" Donanım: - Sıcak daldırma galvaniz kaplama - Tandem dingil - Kauçuk süspansiyonlu dingil - Uzaktan kumandalı elektrikli vinç - Otomatik fren sistemi - Geri vites otomatiği Kedjy Squcjpfx Ac Dodl - 7,0 m'ye kadar tekneler için - Siyah plastik çamurluklar - Bakım gerektirmeyen yataklar - 5 cıvatalı marka dingil - Ayarlanabilir destekler - Yan kılavuz makaraları - 2 adet çift makara - Salıncak dingilde 2 süper makara - Hızlı bağlantılı, çıkarılabilir aydınlatma sistemi - Tutuculu destek tekeri dahil - Tutuculu yedek tekerlek Teslimat: hemen - 100 km/s hız onaylı Yeşil plaka (vergi ve sigorta muaf) Fiyat %19 KDV dahil Römork hemen kullanıma hazırdır. Hatalar ve ön satış hakkı saklıdır.

Koşul: mükemmel (kullanılmış), Catalog number 7316 Kdedsyz Ty Tspfx Ac Djl TECHNICAL DATA - track width: 350 mm - working width of the shaft with saw blades: 355 mm - max. saw blade diameter: 450 mm - max. cutting height: 170 mm - saw blade bore diameter: 70 mm - table dimensions: 1850 x 790 mm from above: - detents - 2 smooth metal feed rollers - shaft with saw blades - 3 smooth metal feed rollers from below: - guide rail - detents - track - metal toothed feed roller - central electric lubrication - stepless feed speed adjustment - electric lifting/lowering of machine body, approx. 1 kW - feed motor: 2.2 kW - main motor: 75 kW - overall dimensions (L/W/H): 2600 x 1800 x 1700 mm - weight: 2700 kg – Used multi-blade saw – Condition: very good Net price: 68,900 PLN Net price: 16,400 EUR (depending on rate of 4.2 EUR) (Prices may change due to greater fluctuations)

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 7908 TECHNICAL DATA - Tool diameter, Wescott holder: 0-20mm - Max hole depth: 155mm - Max milling length: 250mm - Drilling unit adjustable front/back, right/left + angle - Table adjustment up/down - Table rotation angle: 0-45˚ - Worktable dimensions: 600x320mm - Four-point head: 16-22-25-32mm - Material clamp: 2 pcs - Motor power: 2.2kW - Dimensions (L/W/H): 1050x800x1250mm - Weight: 200kg ADVANTAGES – Made in Germany – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drill Kdsdpfxeyrr D Re Ac Dol Net price: 6500 PLN Net price: 1550 EUR, depending on exchange rate 4.2 EUR (Prices may fluctuate with major changes)

Koşul: yeni, Heidenhain LC 183 / 10nm ML 1040mm uzunluk sensörü, ID: 557679-10, SN: 25851432F. AE LC 1x3 okuma kafası ile birlikte (ID: 582578-03, SN: 25475221). Açılmış orijinal ambalajında, hiç kullanılmamış, %100 çalışır durumda. Teslimat kapsamı fotoğraflara göre. Kdjdpfxjx Dwr As Ac Del

Koşul: yeni, güç: 129 kW (175,39 bg), toplam ağırlık: 7.490 kg, renk: turuncu, vites türü: mekanik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, toplam genişlik: 1.995 mm, toplam yükseklik: 2.195 mm, Üretim yılı: 2026, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, merkezi kilitleme, Fuso Canter 7C18 Roll-off Tipper with Municipal Hydraulics and Fiedler Winter Package. 3L Turbo-Diesel Engine 129 kW / 175 HP EURO 6d Start/Stop Automatic 5-speed Manual Transmission Wheelbase: 2800 mm Rear axle with twin tires and differential lock Traction tires 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake-force distribution Tow bar with ball hitch 3-year warranty on the base vehicle from date of first registration or up to 100,000 km. Standard cab with the following features: - Electric windows - Heated electric mirrors - Central locking with remote control - Immobilizer - Adjustable steering wheel and steering column - Driver airbag - Double DIN radio with hands-free kit and rear-view camera - Digital tachograph - EC control device for driver’s hours - Over-windscreen & rear seat storage - Double passenger bench seat - Driver seat with armrest - Lockable glove compartment - Fog lamps with automatic daytime running lights - Tilting cab - Lane departure warning system - Brake assist - Turning assistant - Automatic climate control - 900 mm hook height - Low loading angle - Hydraulic container locking - Control panel in driver's cab - Radio remote control - Towing capacity: 5,000 kg - Mechanical hook safety - Load-holding valves on all hydraulic cylinders - Emergency stop function - Superstructure CE certified - Powered via vehicle hydraulics - Suitable for roll-off containers 3,200 mm long - Matching containers in stock! Additional equipment: Kedpsy Sc Ubjfx Ac Dedl * M&S (Mud & Snow) tires * Dimmable LED auxiliary headlights with integrated heated indicators * Rear LED work lights * Red-white warning markings, 1 set = 4 pieces * Engine-driven dual-circuit universal hydraulic system * 2 double-acting hydraulic functions at the front (up/down, left/right, float position) and 1 working circuit at the rear * Hydraulic front lift with quick change plate, Multicar system * Wax underbody protection Including Fiedler Winter Package: - FRS 2420 spring-loaded snowplough, 2.40 m blade width (also available as 2.60 m), max. working width at full angle 2.20 m, 2-cylinder version, curb deflector, support wheels, LED plough lighting, warning flags, safety valve kit for 2-cylinder version, leak oil line at front - Fiedler FFF 2000 spreader, permanently mounted on roll-off frame, 2 m³ capacity - Control panel in driver’s cab, road-speed related, etc. - Various cab and wheelbase variants with higher payload available at short notice, allowing for larger body dimensions if needed - Large-volume containers with rear doors left/right as well as drivable versions with drive-over tailgate, flatbed variants with fold-down side boards and mesh superstructures available at extra cost You can find more vehicles from Fuso Canter and Multicar brands as well as various container sizes at: Leasing / Financing / Trade-in possible ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors. Our terms and conditions apply.

Koşul: yeni, Üretim yılı: 2026, Planing width: 30–260 mm Planing height: 10–200 mm Number of spindles: 6 Weight: 6,650 kg WINTER Four-Sided Planer & Moulder TIMBERMAX 6-26-TT - Planing width: 30–260 mm - Planing height: 10–200 mm - Minimum workpiece length: 840 mm (single piece) / 280 mm (in series) - 6 spindles - Spindle diameter: 50 mm - Spindle speed: 6,500 rpm - Stepless feed speed: 8–36 m/min - Bottom surfacing spindle, max. tool diameter: 125–140 mm - Right vertical spindle, max. tool diameter: 118–200 mm - Left vertical spindle, max. tool diameter: 118–200 mm - Top horizontal spindle, max. tool diameter: 118–200 mm - Second top horizontal spindle, max. tool diameter: 118–200 mm - Lower horizontal spindle, max. tool diameter: 118–250 mm Spindle sequence: 1. Bottom: 7.5 kW 2. Right vertical: 11.0 kW 3. Left vertical: 11.0 kW 4. Top: 11.0 kW Kodpfoy Ehztox Ac Dedl 5. Second top: 11.0 kW 6. Lower: 11.0 kW - Feed motor: 7.5 kW - Height adjustment motor for feed: 0.75 kW - Height adjustment motor for top spindle: 0.75 kW - Width adjustment motor for left spindle: 0.18 kW - Total power: 71.68 kW - Pneumatic connection: max. 6 bar - Extraction points: 6 x 150 mm - Dimensions (L x W x H): 5,250 x 1,930 x 1,860 mm - Weight: 6,650 kg INCLUDES: - Horizontal spindles with counter bearing (hydraulic clamping) - Electric height adjustment for top spindles - Electric width adjustment for left spindle - PLC control system with user-friendly touchscreen operation - Hard-chromed tables - CE standard compliant - Lubricating pump - Pneumatic pressure of the feed rollers - Feed system with cardan shaft drive - Driven feed rollers in the table

Koşul: ikinci el, Üretim yılı: 2018, Kesme genişliği 300 mm Kesme yüksekliği 10-120 mm Zincir genişliği 300 mm Motor gücü 22 kW WINTER ÇOKLU BIÇAKLI TESTERE MULTIMAX 300 - Üretim yılı 2018 - Fonksiyon testi yapılmış, MÜKEMMEL DURUMDA - Taşıma zinciri YENİ! Teknik veriler: - Zincir genişliği 300 mm - Kesme yüksekliği 10 - 120 mm - Maks. testere çapı Ø 380 mm - Min. testere çapı Ø 200 mm - Testere delik çapı Ø 70 mm - Testere mili Ø 55 mm - Min. iş parçası uzunluğu 600 mm (tekli) / 300 mm (seri kesim) - Çalışma yüksekliği 740 mm - Tabla ölçüsü 1530 x 760 mm - Devir sayısı 4000 d/dk - İlerleme hızı 7,5 - 30 m/dk - Testere mili motoru 22 kW - İlerleme motoru 2,2 kW - Toplam bağlantı gücü 25 kW - Besleme hızı için dijital gösterge - Bir set flanş halkalı testere burcu - Geri tepme koruması - Otomatik yağlama sistemi - Otomatik yıldız-üçgen şalter Kedpfjy Ehzmsx Ac Dodl - Emme bağlantısı 2 x 150 mm - Ölçüler 2200 x 1500 x 1580 mm - Ağırlık 2300 kg - CE standardına uygun

Koşul: yeni, Üretim yılı: 2026, Roll diameter: 600 mm Cutting height: 480 mm Dimensions (L/W/H): 5200x1600x1850 mm WINTR VERTICAL 2-HEAD BANDSAW MILL – V2KB-480 The vertical 2-head bandsaw mill type 480 TWIN has been designed for high-performance processing of stacked timber as well as thin round logs. The machine allows for simultaneous double-sided cutting of cants from round material, preparing it for further processing. Kedpfx Acsy Ehy Ne Dsdl The 480 TWIN model is used as the initial element of a technological line for cutting and edging logs, particularly in the production of pallet components. Thanks to the use of two saw heads, two working cuts with high dimensional accuracy can be performed simultaneously. The construction is based on a robust steel frame, a precise bandsaw guide system, and a feed system with continuously variable feed rate. Hydraulic band tensioning ensures optimal working conditions for the saw bands and a stable cutting process. Technical data: Dimensions • Length: 5200 mm • Width: 1600 mm • Height: 1850 mm Operating parameters • Feed table height: 850 mm • Maximum raw material diameter: 480 mm • Raw material length: 800 – 3000 mm • Cant thickness produced: 45 – 300 mm • Feed speed: 0 – 20 m/min Cutting system • Number of heads: 2 • Bandsaw length: 4000 mm • Bandsaw width: 40 – 50 mm • Guide wheels: 600 mm • Hydraulic band tensioning • Cutting width measurement system: ANP 05 Drives and power supply • Main motors: 2 × 5.5 kW • Feed drive motor: 0.75 kW • Power requirement: 12 kW • Power supply: 3-phase 400 V Performance • Average output: 7 – 8 m³/h* *Output depends on material type, operator, and material feed. Advantages: Production • High output when processing thin and medium-diameter raw material • Simultaneous operation of two heads shortens cutting time • Dimensionally accurate semi-finished products for further processing Economy • Lower material losses compared to circular saw technology • Optimized energy consumption relative to output • Reduced manual processing costs Organization • Suitable as part of a complete production line • Simple operation and quick operator training • Robust design for multi-shift operation

Koşul: yeni, Üretim yılı: 2025, Ölçüler (Uzunluk/Genişlik/Yükseklik): 2570x1100x2490 mm Ağırlık: 400 kg Toplam güç ihtiyacı: 4 kW Toz emici, H3 WIB-200 normuna uygun - 2 adet talaş varili, kelepçeli - Kalan toz miktarı: 0,1 mg/m3 - Açma / kapama anahtarı - Güç tüketimi: 4,0 kW - Şebeke gerilimi: 400 V / 50 Hz / 3 faz ~ - Filtre yüzeyi: 11,7 m2 - 30 adet filtre torbası - Otomatik, pnömatik filtre rejenerasyonu JET sistemi - Toz varil hacmi: 2 x 70 l - Emme ağzı: 200 mm - Nominal hava debisi: 3300 m3/h - Minimum hava debisi: 2200 m3/h - Negatif basınç: 2600 Pa - Taşıma ölçüleri: U = 2570 mm, G = 1.100 mm, Y = 2.490 mm - Ağırlık: 400 kg Kdsdpfx Acsy Ehy Aj Del

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 100 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 20190824, X ekseni ilerleme hızı: 33 m/dak, toplam ağırlık: 2.800 kg, dönüş hızı (maks.): 6.800 dev/dak, iş parçası yüksekliği (maks.): 100 mm, iş parçası genişliği (maks.): 180 mm, Four-sided planing machine with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Stepless feed speed adjustment: 8-33 m/min Spindle diameter: 40 mm Ax1 - bottom: Ø125 mm (Ø152 mm slot cutter), 4 kW Ax2 - right: Ø115-170 mm, 4 kW Ax3 - left: Ø115-170 mm, 4 kW Ax4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Feed roller dimensions: Ø140x35x50 mm Extraction port diameter: 4x120 mm Kodpfx Asyu Ii Iec Dodl MACHINE DETAILS Feed motor power: 3 kW Total connected load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h FEATURES Solid cast and welded steel frame Chromed worktable for secure material feed Side guide rollers with pneumatic drive Professional cardan shaft drive for the feed system Manual centralized lubrication system Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric height adjustment of the working table Ergonomically positioned control panel compliant with EU standards