CNC torna ve freze merkezi

Mazak Quick Turn Smart 200L

QUICK TURN SMART 200 L Universal 500

Specifications
Chuck Diameter, Main Spindle: 8"
Max. Swing Diameter: 660 mm
Standard Machining Diameter: 212 mm
Max. Machining Diameter: 350 mm
Max. Bar Stock Diameter Main Spindle: 65 mm
Note: Maximum bar stock diameter depends on the clamping system used
Distance from Spindle End to Turret: 132–687 mm
Max. Workpiece Weight (Chuck Machining, Main Spindle): 200 kg
Note: Dependent on the position of the center of gravity
Max. Workpiece Weight (Shaft Machining, Main Spindle): 500 kg
Note: Dependent on the position of the center of gravity

Main Spindle
Max. Speed: 5,000 rpm (depends on the clamping system)
Min. Speed: 35 rpm (depends on the clamping system)
Spindle Nose: A2-6"
Spindle Bore: 76 mm
Motor Power (30 min. duty): 15.0 kW
Rated Power (100% continuous duty): 11.0 kW
Max. Torque: 233 Nm

Tailstock
Tailstock Taper: MT 5 (fixed live center)
Tailstock Travel Range: 565 mm
Max. Thrust: 1,000 Nm

Turret
Number of Tool Stations: 12
Kdsdpfx Adsyl I Hnjdoh
Turning Tool Shank Cross-Section: 25 mm
Max. Boring Bar Diameter: 40 mm
Indexing Time (1 station): 0.17 s
Indexing Time (full turret rotation): 0.54 s

Feeds
Rapid Traverse X-Axis: 30.0 m/min
Rapid Traverse Z-Axis: 33.0 m/min
Max. Constant Feed X-Axis: 60 mm/sec
Max. Constant Feed Z-Axis: 80 mm/sec
X-Axis Travel: 195 mm
Z-Axis Travel: 560 mm

Other
Tank Capacity: 180 l
Power Consumption (30 min. duty): 29.1 kVA
Power Consumption (continuous duty): 23.3 kVA

Machine Dimensions
Center Height: 1,020 mm
Length: 2,630 mm
Width: 1,680 mm
Height: 1,700 mm
Weight: 4,500 kg
Note: Machine + coolant tank, without chip conveyor, without coolant

STANDARD EQUIPMENT
General Machine Options
Transformer for European market
Roller guideways
76 mm spindle bore
1 set of manuals on CD (electronic)
1 set of alignment tools
Machine feet/leveling pads
Mazak standard color
Spindle orientation in a fixed position
Main spindle motor (AC 15 kW)
Spindle speed 5,000 rpm
12-station tool turret
NC-controlled tailstock
Tailstock pressure setting
Live tailstock center type NSK/LC-5SW 5,000 rpm
Tailstock with fixed quill MT5 (500U)

Safety Devices
Operator door with safety interlock
Double foot switch
Open and close the chuck with separate switches
Hydraulic pressure interlock
Hydraulic pressure monitoring of the machine
Machine stops and alarm is triggered in case of pressure drop
Fully enclosed machining area
Protection against chips, coolant, and access to working area during automatic machining
Work area lighting
Safety features according to international standards

Coolant Supply
High-performance coolant system 520 W
Max. flow rate: 11.5 l/min
Complete coolant system including: pumps, valves, piping, and nozzles for efficient production of high-quality parts

Chuck, etc.
Chuck status indication
Feedback on chuck status via sensors
8" chuck with through hole BB208A615

Measuring System
Automatic Tool Eye
On-machine tool measurement during setup, as well as for tool wear compensation and tool breakage detection in automatic operation
Absolute positioning system

Chip Disposal
Prepared for side-mounted chip conveyor

Control
MAZATROL Smart Control

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.