Balya makinesi

Paal Konti425D

Durumu: kullanılmış, Üretim yılı: 2003, Teknik detaylar: Basınç: 40 ton sandık açıklığı: 1200 x 730 mm Malzeme: karton, plastik - karton şişeler Gerilim: 400 / 50 V / Hz Toplam güç gereksinimi: 16,4 kW Makinenin taşıma boyutları: 6,5 x 6,2 x 2,7 m Kdjdpfju Nw Ezsx Ag Nog Geri dönüşüm için tam otomatik hidrolik KANALLI BALYA PRESİ konveyör ünitesi/taşıma bandı ile LxW: 4500x1000mm motor tahrikli otomatik ciltleme ünitesi ile 3 katlı Balya sayım ekranı/sayacı Balya haznesi LxWxH: 1800x800x800mm, 1,2 m³ hacimli Balya boyutu LxWxH: 300-1500 x 800x800mm Balya ağırlığı balyalanan malzemeye ve balya uzunluğuna bağlı olarak 250 - 450 kg Dolum açıklığı LxW: 1200x730mm: Dolum yüksekliği 1200mm Hazne boyutu LxWxH: 1200x1200x1400mm; dolum yüksekliği 2500mm *

Durumu: kullanılmış, Üretim yılı: 2014, presleme kuvveti: 122 t, toplam ağırlık: 40.000 kg, basınç: 315 bar, Makine kullanılmış ama fazlalık olduğundan satılıktır! Ksdpfx Aowa N U Dsg Njdg

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2007, çalışma saatleri: 13.209 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, yağ tankı kapasitesi: 400 l, son revizyon yılı: 2025, hacim debisi: 108 m³/saat, Technical Data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March) Number of bales produced: 23,379 units Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1,250 x 1,050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical output: 108 m³/hour Bale dimensions: 1,100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput with bulk density of 30 kg/m³: approx. 3.1 t/hour Bulk density of 60 kg/m³: approx. 4.5 t/hour Bulk density of 100 kg/m³: approx. 7.2 t/hour Bale weight at approx. 1.2 m bale length: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC controller: Siemens S7-200 Effective transport dimensions (excluding baler): 6,780 x 1,800 x 2,100 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the Baler: The baler was used in a production facility exclusively for compacting cardboard and was regularly maintained. With just 13,209 operating hours, the machine has seen relatively low usage. The baler has been partially refurbished and thoroughly tested in our workshop. Kedpfxew U Dt No Ag Nsdg The following refurbishment work was carried out: - Machine cleaned - Bale retaining mechanism serviced and lubricated - Light barrier replaced - Twisting unit fully disassembled, all bearings and plastic gliders replaced, lubricated, and chain tension adjusted - Knives and counter-knives dismantled, sharpened, and reinstalled - Knife clearance newly adjusted - General maintenance performed and machine lubricated Scope of Delivery: - 1 baling press with wire spool boxes (without wire) - 1 set of machine documentation Notes: The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We assume no liability for technical data or possible errors.

Durumu: kullanılmış, Üretim yılı: 1999, çalışma saatleri: 50.702 h, Fonksiyonellik: tamamen fonksiyonel, Bale Press Paal Konti 325 D/SO, Year of Manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Press force: 94 t Total connected load: 128 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput rate at: 35 kg/m³: approx. 14 t/h Kdjdpfx Agox I D N Sj Nog 60 kg/m³: approx. 24 t/h 100 kg/m³: approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The baler is currently still in operation. Dismantling is planned for January 2026. An on-site inspection under operating conditions is possible. The conveyor belt visible in the pictures is not included in the scope of delivery. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment only. Sale is ex works, against advance payment, without warranty or guarantee.