Kontrolör ve pano

Presto

Durumu: iyi (kullanılmış), Üretim yılı: 2012, Paper Baler / Baling Press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Unladen weight: 4,200 kg Max. operating overpressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated power: 15 kW Electrical connection: 35 A gG Dedpfx Aeyrt T Tedtjcd Machine type: horizontal baler for paper and cardboard

Durumu: mükemmel (kullanılmış), makine/araç numarası: PA-399, Baskı formatı: A3 kağıt formatı: yaklaşık 31x45cm Dedpfsh Eh U Rox Adtocd

Durumu: iyi (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 15.606 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, güç: 30 kW (40,79 bg), hacim debisi: 160 m³/saat, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Pressing force (main ram): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions (with a bulk density of 60 kg/m³): approx. 6.7 t/h Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (the main control valve on the hydraulic block was replaced) and tested under operating conditions, both in manual and automatic mode. The machine documentation is available in German. Viewing of the baler is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Dcsdpfx Aoyplwfjdtsd Your Serviceteam Mertens & Frowein GmbH

Durumu: iyi (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, Infeed Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined belt conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Drive: 30 kW Pressing force: 50 t Filling opening: 1600 x 650 mm (L x W) Channel cross section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Dcsdjyma Rzjpfx Adted Binding: 4-fold Throughput at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically adjustable Drive power 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Materials: paper, cardboard, plastic film, PET bottles Please note: All technical data are based on information provided by the manufacturer. We do not assume any liability for the stated specifications or possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections can be arranged by appointment. Sale is ex-works, against advance payment, without warranty or guarantee.

Üretim yılı: 2005, Durumu: iyi (kullanılmış), birkaç kullanılmış, fonksiyonel şalter dolabı. Belirtilen satış fiyatı, yarda çıkışı artı %19 KDV için geçerlidir. Dodegytz Uspfx Adtocd

Durumu: mükemmel (kullanılmış), Üretim yılı: 2011, Fonksiyonellik: tamamen fonksiyonel, güç: 9,7 kW (13,19 bg), Technical Data Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder internal dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application of the machine: The PZA cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cardboard boxes from the returns department before pressing them into bales. The boxes were manually placed onto the feed conveyor, transported directly via a flat belt conveyor to the shredder, and shredded. The pre-shredded cardboard was then conveyed over several hundred meters to the baling press for compaction. Scope of delivery: Djdpfx Adou Tha Ietecd 1 unit Presto Cardboard Shredder (2-Shaft Shredder) type PZA Remarks: The cardboard shredder was an essential component of the disposal line and received regular maintenance to ensure high availability for the returns department. The machine is in good condition and ready for immediate use. The price is stated per unit, ex works our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection by appointment possible. We assume no liability for the technical specifications or any possible errors.

Durumu: iyi (kullanılmış), Üretim yılı: 2010, çalışma saatleri: 3.641 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 36 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.080 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, güç: 15 kW (20,39 bg), hacim debisi: 90 m³/saat, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Fill volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Dcsdpfx Adju Thh Estod Operating throughput with bulk material density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput at bulk densities of: 35 kg/m³: 1.8 t/hour 60 kg/m³: 2.5 t/hour 100 kg/m³: 3.1 t/hour Transport dimensions – press only: 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (press): approx. 4 t Notes: The baler has been tested for functionality in our workshop, subsequently placed in storage and is therefore available at short notice. Machine documentation (operating manual, CE certificate, electrical and hydraulic circuit diagrams) is included. Inspection can be arranged by appointment. We accept no liability for technical data or possible errors.

Durumu: iyi (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 1.932 h, Fonksiyonellik: tamamen fonksiyonel, Bale Press Presto CC 50 M, semi-automatic, year of construction 2015, with lift-tipper device Dcedpfx Asx Uz Daedted Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or our YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we can also carry out tests with your material for a cost compensation. We are happy to answer any questions you might have about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m., and on Friday from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on manufacturer’s information. We do not accept any liability for any errors or omissions. This offer is subject to change without notice; prior sale and withdrawal are reserved. Inspections are possible by prior arrangement. Sale is ex works, advance payment only, without warranty or guarantee.

Durumu: iyi (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 1.022 h, Fonksiyonellik: tamamen fonksiyonel, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1,022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Feed opening: 1,030 x 750 mm Feed volume: 0.53 m³ Binding: 3-fold, manual Throughput (bulk density): 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale size: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3,300 x 1,235 x 1,860 mm (LxWxH) Dedex Uzynepfx Adtscd Machine weight: approx. 2,500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video is available on our website or YouTube channel. Inspection, including under power, is possible at any time by appointment. On request, we also conduct tests with your materials for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 8:00 and 14:00. On Fridays, we are available from 8:00 to 13:00. Please note: All technical data is based on the manufacturer's specifications. We accept no liability for the information provided or for any possible errors. All offers are non-binding; prior sale and withdrawal are reserved at any time. Inspections are possible by appointment. The machine is sold ex-site, without warranty or guarantee.

Durumu: iyi (kullanılmış), Üretim yılı: 2017, çalışma saatleri: 1.640 h, Fonksiyonellik: tamamen fonksiyonel, Baler Presto CC 40 M Technical data: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Filling volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput (with bulk densities of) 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film Dedsx Uzxkepfx Adtscd The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Note: Channel discharge fully automatic, self-regulating. Inspection under power is possible anytime by appointment. Upon request and for a handling fee, we can also run trials with your material. We will gladly answer your questions about the machine via phone from Monday to Thursday between 08:00 and 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or for potential errors. This offer is subject to change without notice. Prior sale reserved and can be revoked at any time. Inspections are available by appointment. Sale is ex works, prepayment required, without warranty or guarantee.