Buzlu Su Hazırlayıcı / Soğutucu

Rivacold RED Compact V7

Machine Description and Technical Data
2.1 Machine Description

The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic piping on site.
Main Components:

A: Self-supporting frame with stainless steel cladding (panels 1–6 removable)

B: Trough with evaporator

C: Condenser unit

D: Temperature controller

E: Control cabinet

F: Hydraulic circuit with pump (second pump optional)

2.2 Structure

The compact monoblock housing integrates all components necessary for operation.
The exterior cladding is made of stainless steel; individual panels are removable for maintenance purposes.

2.3 Trough

The stainless steel trough contains the evaporator block.
It is insulated with high-density polyurethane foam.
A blower ensures water circulation within the trough.

2.4 Condenser Unit

The condenser unit operates with either cooling tower or well water, depending on the order specification.
It supplies the evaporator block and is located below the trough.

2.5 Temperature Controller

The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status.
The control system is programmed to provide maximum operational safety with user-friendly operation.

2.6 Control Cabinet

The control cabinet is dust- and splash-proof.
It contains:
- Main switch and emergency switch
- Contactors, thermal relays, fuses
- Safety transformer for control circuits
Access is provided by removing Panel 1 below the temperature controller.

2.7 Hydraulic Circuit with Pump

Isdexvca Aopfx Aayobd
Panel 3 must be removed for connection.
Intended connections:

A – Make-up water (T1): Connection to the water supply; level regulated by float valve.

B – Return (T2): Return flow from consumers.

C – Overflow (T3): Connection to operating wastewater outlet.

D – Chilled water supply (P1): Feeds consumers; isolation valve must be open before commissioning. A second pump (P2) is optional.

E – Condenser water supply:
The shell-and-tube condenser can be operated with well or cooling tower water:

Diagram A – Well water: Use small connections C1, C2 (inlet and outlet). The large connection remains closed. Optional installation of a pressure-controlled valve system available.

Diagram B – Cooling tower water: Use C3 and C1/C2 in parallel to increase the flow cross-section.
It is recommended to install a mechanical filter at the water inlet to prevent contamination.

Manufacturer:
FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy
Model: RED COMPACT V.7

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.