CNC torna tezgahı

Schaublin 125-CCN R-T A2-4

Voltage: 380V
Net weight: 1400 kg
Customs tariff number: 8458.1120
Dimensions: 180x128x172 cm
Kwodpex Upugofx Acust

TECHNICAL SPECIFICATIONS

CAPACITIES
Maximum turning diameter: 270 mm
Maximum admitted diameter over cross slide: 115 mm
Center height over cross slide: 60 mm
Turning length B32: 265 mm

Center height above floor: 1,162 mm

HEADSTOCK A2-4 / Camlock D1-3’’
Spindle for Schaublin collets: Hainbuch / F38 / B32
Spindle speed: 50–5,000 rpm
AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW
AC motor drive – continuous/intermittent torque: 42 / 58 Nm
Spindle bore (without clamping key): 39 mm
Max bar capacity in collet chuck: 32 mm
Max bar capacity in automatic chuck: 32 mm

PNEUMATIC CLAMPING
Adjustable axial clamping force at 5 bar: 1,150 daN

CROSS SLIDE
Cross travel, X axis: 190 mm
Resolution, X axis (at radius): 0.0005 mm
AC motor drive – continuous/intermittent torque: 4 / 14 Nm
Ball screw Ø x pitch: Ø 20 x 5 mm
Longitudinal travel, Z axis: 390 mm
Resolution, Z axis: 0.001 mm
AC motor drive – continuous/intermittent torque: 4 / 14 Nm
Ball screw Ø x pitch: Ø 32 x 5 mm

FEEDS
Working feeds, X and Z axes (stepless): 0–5 m/min
Rapid traverse, X and Z axes: 8 m/min

TOOL TURRET SYSTEM
Standardized toolholder mount: VDI 20
Number of fixed / live stations: 8 / -
Maximum tool section: 16x16 mm
Integrated coolant and bi-directional indexing: yes

COOLANT SYSTEM
Tank capacity: 55 L
Pump flow rate: 10 L/min
Pump pressure: 1.7 bar

PNEUMATIC TAILSTOCK
Spindle sleeve taper: MT3
Spindle external diameter: 45 mm
Spindle stroke: 70 mm
Adjustable thrust force: 25–260 daN

Unless otherwise stated, technical specifications are provided without obligation and subject to error or omission.

Completely overhauled:
Mechanical, geometric, hydraulic, and electrical components (checked and/or replaced)

Headstock
Disassembly, cleaning of all parts, replacement of worn and defective parts, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings, adjustment, new paint.

Turret
Disassembly, cleaning of all parts, replacement of worn and defective parts, new paint, and surface refacing.

Tailstock
Disassembled, checked, and overhauled. Newly painted.

Hydraulic and pneumatic systems
Disassembled, motor checked, hoses, defective and worn parts replaced.

X axis
Disassembly, replacement of worn parts such as O-rings, seals, wipers. New ball screw and carriage.

Z axis
Disassembly, replacement of worn parts such as O-rings, seals, wipers. New ball screw and carriage.

Electrical cabinet
Complete inspection, various relays replaced.

Paint
Colors: White RAL 9003 and grey RAL 7011

Geometry checked to manufacturer’s protocol.

Accessories cleaned, checked, and serviced.
Year: 2002

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.