Hidroforming presi

SCHULER SHP 35000-3150/2150

Pressing force: 3,500 t
Stroke: 900 mm
Gedpfx Amevuukhslsub
Distance table/ram, stroke bottom: 1,000 mm
Distance table/ram, stroke top: 1,900 mm
Table area: 3,150 x 2,150 mm
Ram area: 3,150 x 2,150 mm
Max. total tool weight: 30.0 t
Max. upper tool part weight: 20.0 t
Speed from: 400 mm/s
Working speed: 0.9 - 9.2 mm/s
Hydraulic operating pressure: 280 bar
Oil capacity: 5,500 l
Rated current: 760 A
Voltage: 400 V
Frequency: 50 Hz
Drive power: 425 kW
Weight: 231.0 t
SPECIAL PROMOTION
as is, disassembled and stored
WITHOUT commissioning / WITHOUT further work
Loaded onto truck, free of charge
Hydroforming press / IHU-press / Internal high-pressure forming press
Maximum preforming force approx. 1,000 t
Total tool weight approx. 30 t
Upper tool weight approx. 20 t
- Tool function interface: 4 controlled axes, 3 ON/OFF functions ram, 4 ON/OFF functions table
- Parallelism control: via the longitudinal side of the press
- Light curtain: front and rear
- Safety light barrier: left and right side
- Ram locking in the upper position
- Two-hand operator panel: 1
- Independent high-pressure hydraulic circuit (water hydraulics): 2
- Max. operating pressure: 3,000 bar
- Displacement volume per pressure intensifier: 3.74 l
- 2 filling pumps: volume and pressure dependent on power supply network
- Location of the pressure intensifier: to be determined
- Main pumps: located on the press head/oil tank
- Tool change table: 6.7 x 2.15 m
- Max. tool size: 3.15 x 2.15 m
- Tool clamping at the ram: hydraulic
- Tool clamping at the table: mechanical
- Electrical control: Schuler Multiview HF
Note:
This machine is an EU re-import!
If the machine is to be installed and operated within the EU, it must be adapted in accordance with the currently valid EU directives of the country of installation before commissioning.
Such adaptations are not included in the quoted price.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.