Otomatik kalas kesim makinesi

Stromab TR600

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, maksimum kesme yüksekliği 160 mm Rcjdpfxsyu Shne Ahlsb en fazla kesme genişliği 600 mm daire testere çapı 600 mm en küçük testere çapı 590 mm testere dönme hızı 2800 devir/dakika motor gücü 9,2 kW imalat yılı 2006 CE işareti

Koşul: mükemmel (kullanılmış), Üretim yılı: 2001, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 600 mm, kesme yüksekliği (maks.): 160 mm, maksimum kesme yüksekliği 160mm maksimum kesme genişliği 610mm testere çapı 600mm Rcjdoymnvlopfx Ahlsb minimum testere çapı 590mm testere devir hızı 2800 dev/dak motor gücü 7,5kW 2 dayama imal yılı 2001 ağırlık yaklaşık 700kg

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1,500 kg Total power requirement: 10.2 kW Automatic optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power: 9.2 kW - Saw blade diameter: 600 x 30 mm, Z=60 - Cutting capacity according to cutting diagram - Cutting capacity: 150 x 365 mm - Cutting capacity: 130 x 440 mm - Cutting capacity: 100 x 530 mm - Cutting capacity: 60 x 580 mm - Cutting capacity: 30 x 610 mm - Cutting cycle: 6 seconds - Hydraulic cross-cutting unit - Inclined worktable by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE standard - Weight: 1,500 kg Connection data: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x 100 mm diameter - Extraction capacity: 2,400 m³/h - Air speed at extraction port center: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6,000 mm - Maximum pusher speed: 90 m/min - Drive via brushless servo motor - Feed system with precision racks and measurement by servo motor - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly in the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal offcut, and priority) Redpsv A Htkjfx Ahlscb - Standard USB and Ethernet ports - Including OPTI function for automatic measurement of the workpiece to be cut. Optimal solution for processing material with variable lengths, either single or bundle feed - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal offcut, and priority) - Including OPTI PLUS function for mark detection, which ensures full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 - Outfeed table: €360.00/m

Koşul: ikinci el, Üretim yılı: 1997, Fonksiyonellik: tamamen fonksiyonel, giriş akımı türü: trifaze, kesme genişliği (maks.): 610 mm, testere bıçağı çapı: 600 mm, - Year of manufacture: 1997 - Two pneumatic stops Rcjdpox Ekmrjfx Ahlsb TECHNICAL SPECIFICATIONS: - Saw blade diameter: 600 mm - Maximum cutting width: 610 mm (at a workpiece height of 30 mm) - Maximum cutting height: 160 mm (at a workpiece width of 380 mm) - Motor power: 7.5 kW - Chip extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to desired length - Hydraulic workpiece clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm, diameter 90 mm - Outfeed table: 1500 mm / 500 mm, diameter 60 mm - Spindle diameter: 30 mm - Saw blade rotational speed: 2800 rpm Transport dimensions: - 280 x 165 x 140 cm - Weight: 600 kg