Bant konveyörlü dozaj sistemi

Viscotec 2VHD12-3D Hygienic Dispenser

Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and chunky products.

Product-contacting surfaces:
- Elastomers with FDA compliance certification
- Product-contacting parts are autoclavable
- Easy integration due to compact design

Dimensions:
- Overall length approx. 2300 mm
- Nominal width approx. 350 mm
- Total width with motor approx. 500 mm
- Belt top edge adjustable from 980 to 1080 mm
- Frame made from robust square tube profiles
- Design in stainless steel grade 1.4301
- Double-sided knife edge, radius approx. 5 mm
- Food-grade conveyor belt, manufacturer Habasit, color white
- Central drive station
- SEW gear motor incl.
- Food-grade coating (subject to delivery time)
- Adjustable speed via frequency inverter (between 0.8–8 m/min)
- Incl. adjustment frame for 5 viscotec brand dispensers
- Adjustments are made essentially via profiles and clamping units
- Height adjustment is manual via clamping units, all dispensers are adjusted simultaneously. Fine adjustment for each dispenser individually via elongated holes if needed. Each dispenser can be set individually for lateral adjustment, tilt, and in or against the conveying direction.
- Without side guide
- incl. engineering
- incl. pre-assembly
- incl. on-site setup of dispensers at our facility
- incl. testing at our facility

Rsdpfxexcvzas Albsu
Finish:
- Conveyor in stainless steel 1.4301
- Round tubes for dispenser frame in stainless steel 1.4301
- Clamping units made of aluminium
- Five bars transferred from an existing conveyor system to our conveyor belt.

Control cabinet:
- Made from stainless steel 1.4301
- Control and frequency converter by Mitsubishi Electric
- Configuration:
- Main switch, emergency stop, automatic on/off push buttons
- Display for speed setting in m/min and for setting delay time for the dispenser start signal
- Sensors for bar detection (each bar detected individually)
- Sensors and signal for dispenser start (each dispenser receives its own start signal)
- Communication interface with Viscotec
- Emergency stop currently only for our own machine.
- incl. control cabinet construction with 50% reserve capacity
- incl. high-grade sensors (distance sensors capable of measuring and evaluating distance)
- incl. advanced controller (hardware and software expandable at any time without controller replacement)
- incl. HMI (display), approx. 7"
- incl. E-plan
- incl. program
- incl. testing at our facility (interface test with Viscotec)

Finish:
- Control cabinet entirely in stainless steel
- Sensors made of stainless steel and FDA-approved.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.