Düz kasa kamyon

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Durumu: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, vites türü: otomatik, dingil konfigürasyonu: 3 aks, toplam ağırlık: 32.000 kg, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, emisyon sınıfı: Euro 6, renk: beyaz, Üretim yılı: 2025, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machine transporter / work platform transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single wheels - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - Safety long-distance driver's cab FH - Cab parking heater, 2 kW - 33 l cool box with freezer compartment under the bunk - Air suspension on front axle(s) - Gearbox / I-Shift controls via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco-cruise control (cruise control), including brake cruise control - Manual shifting in automatic mode possible (including kickdown) - Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking function - Lane keeping assistant - Side collision avoidance system and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for work platform and construction machine transport with hydraulic access ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - Outer width 2,550 mm - Loading height from top of floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end angled for low ramp angle Giedew Itmrjpfx Aduol - Outer frame profile 90° - Front wall in reinforced design - Storage box inside below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet toolboxes and exterior frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams each with Multi-X contour along entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front of front wall (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/stretch ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp as well as a drive-through ramp for warehouse equipment (stretch section remains closed), fixed ramp part is placed onto the hall ramp - Sturdy tension bar as transport lock (optionally with strap tensioning) - 2 hydraulic rear supports with pads and warning sound & indicator in cab - Ramp and support operation via electro-hydraulics - Control via radio remote as well as emergency control at the control block - Control block installed in stainless steel toolbox on frame side - Superwinch 8.2 t with steel cable approx. 20 m - Entry handles right and left for access to the loading area - 5 stainless steel drawer-type toolboxes, incl. lighting (optional, extra charge) - Side panelling per sample pictures (green vehicle) optional, extra charge - KTL coating for superstructure - Ball-type trailer coupling at rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted at top of front wall - 4 LED work lights on outside of frame as ambient lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with cab in white and body in nova grey. (Painting of outer frame in RAL color as requested is possible)

Durumu: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machinery transporter / aerial work platform transporter ? FH 500 8x2R ? Trailing axle, electro-hydraulically steered, single tires ? Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ? Safety long-distance cab FH ? Cab auxiliary heater, 2 kW ? 33 L cool box with freezer compartment, under the bunk ? Air suspension on front axle(s) ? Transmission / I-Shift operation via driver's seat control unit ? I-Shift driving modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic information ? Eco cruise control (cruise control), including brake cruise control ? Manual shifting possible in automatic mode (including kickdown) ? Adaptive traction control ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assist ? Side collision avoidance and turn assist (both sides) ? Driver alert system (fatigue warning) * VEB Volvo Engine Brake * etc. WIESE superstructure for aerial platform and construction machinery transport, with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Godpfxow Itmle Adueil Superstructure dimensions: - Length usable approx. 9,050 mm - External width 2,550 mm - Loading height upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized steel welded construction, box-type design - Short crossmember distances for high point loads - Sloped rear for low drive-up angle - Outer frame profile 90° - Bulkhead reinforced version - Storage box inside, below, in front of the bulkhead - Grating floor - Design suitable for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with Multi-X contour along the entire length, numerous lashing points 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front of the bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 individual, sliding ramps; both ramps are laterally adjustable - Ramp can be used as a drive-up ramp or as a crossover ramp for warehouse equipment (extension part remains closed), the fixed ramp part is placed onto the building ramp - Sturdy tension bar for transport locking (alternative with strap tension) - 2 hydraulic rear supports with pads, including warning tone and indicator light in the cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency controls on the control block - Control block mounted in stainless steel storage box on the frame side - Superwinch 8.2 t winch with approx. 20 m steel cable - Access to load area via steps with handrails right and left - 5 stainless steel storage boxes in pull-out design, incl. lighting as option for an extra charge - Side paneling see example images (green vehicle) as option for an extra charge - KTL coating of superstructure - Ball head trailer coupling at the rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted high on the bulkhead - 4 exterior-frame LED work lights as area illumination - 2 LED work lights at the rear - 1 revolving beacon at the rear, removable The stock vehicle is supplied with cab in white and superstructure in novagrau; (external frame pain